diff --git a/src/modules/Telemetry/AirQualityTelemetry.cpp b/src/modules/Telemetry/AirQualityTelemetry.cpp
index 2472b95b1..8b7ab1b24 100644
--- a/src/modules/Telemetry/AirQualityTelemetry.cpp
+++ b/src/modules/Telemetry/AirQualityTelemetry.cpp
@@ -1,36 +1,54 @@
 #include "configuration.h"
 
-#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include("Adafruit_PM25AQI.h")
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "AirQualityTelemetry.h"
 #include "Default.h"
+#include "AirQualityTelemetry.h"
 #include "MeshService.h"
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "RTC.h"
 #include "Router.h"
-#include "detect/ScanI2CTwoWire.h"
+#include "UnitConversions.h"
+#include "graphics/SharedUIDisplay.h"
+#include "graphics/images.h"
 #include "main.h"
+#include "sleep.h"
 #include <Throttle.h>
 
-#ifndef PMSA003I_WARMUP_MS
-// from the PMSA003I datasheet:
-// "Stable data should be got at least 30 seconds after the sensor wakeup
-// from the sleep mode because of the fan’s performance."
-#define PMSA003I_WARMUP_MS 30000
+#if __has_include(<Adafruit_PM25AQI.h>)
+#include "Sensor/PMSA003ISensor.h"
+PMSA003ISensor pmsa003iSensor;
+#else
+NullSensor pmsa003iSensor;
 #endif
 
 int32_t AirQualityTelemetryModule::runOnce()
 {
+    if (sleepOnNextExecution == true) {
+        sleepOnNextExecution = false;
+        // uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.environment_update_interval,
+        uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.air_quality_interval,
+                                                                   default_telemetry_broadcast_interval_secs);
+        LOG_DEBUG("Sleeping for %ims, then awaking to send metrics again.", nightyNightMs);
+        doDeepSleep(nightyNightMs, true, false);
+    }
+
+    uint32_t result = UINT32_MAX;
+
     /*
         Uncomment the preferences below if you want to use the module
         without having to configure it from the PythonAPI or WebUI.
     */
 
     // moduleConfig.telemetry.air_quality_enabled = 1;
+    // TODO there is no config in module_config.proto for air_quality_screen_enabled. Reusing environment one, although it should have its own
+    // moduleConfig.telemetry.environment_screen_enabled = 1;
+    // moduleConfig.telemetry.air_quality_interval = 15;
 
-    if (!(moduleConfig.telemetry.air_quality_enabled)) {
+    if (!(moduleConfig.telemetry.air_quality_enabled  || moduleConfig.telemetry.environment_screen_enabled ||
+          AIR_QUALITY_TELEMETRY_MODULE_ENABLE)) {
         // If this module is not enabled, and the user doesn't want the display screen don't waste any OSThread time on it
         return disable();
     }
@@ -42,79 +60,141 @@ int32_t AirQualityTelemetryModule::runOnce()
         if (moduleConfig.telemetry.air_quality_enabled) {
             LOG_INFO("Air quality Telemetry: init");
 
-#ifdef PMSA003I_ENABLE_PIN
-            // put the sensor to sleep on startup
-            pinMode(PMSA003I_ENABLE_PIN, OUTPUT);
-            digitalWrite(PMSA003I_ENABLE_PIN, LOW);
-#endif /* PMSA003I_ENABLE_PIN */
-
-            if (!aqi.begin_I2C()) {
-#ifndef I2C_NO_RESCAN
-                LOG_WARN("Could not establish i2c connection to AQI sensor. Rescan");
-                // rescan for late arriving sensors. AQI Module starts about 10 seconds into the boot so this is plenty.
-                uint8_t i2caddr_scan[] = {PMSA0031_ADDR};
-                uint8_t i2caddr_asize = 1;
-                auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
-#if defined(I2C_SDA1)
-                i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1, i2caddr_scan, i2caddr_asize);
-#endif
-                i2cScanner->scanPort(ScanI2C::I2CPort::WIRE, i2caddr_scan, i2caddr_asize);
-                auto found = i2cScanner->find(ScanI2C::DeviceType::PMSA0031);
-                if (found.type != ScanI2C::DeviceType::NONE) {
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_PMSA003I].first = found.address.address;
-                    nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_PMSA003I].second =
-                        i2cScanner->fetchI2CBus(found.address);
-                    return setStartDelay();
-                }
-#endif
-                return disable();
-            }
-            return setStartDelay();
+            if (pmsa003iSensor.hasSensor())
+                result = pmsa003iSensor.runOnce();
         }
-        return disable();
+
+        // it's possible to have this module enabled, only for displaying values on the screen.
+        // therefore, we should only enable the sensor loop if measurement is also enabled
+        return result == UINT32_MAX ? disable() : setStartDelay();
     } else {
         // if we somehow got to a second run of this module with measurement disabled, then just wait forever
-        if (!moduleConfig.telemetry.air_quality_enabled)
-            return disable();
-
-        switch (state) {
-#ifdef PMSA003I_ENABLE_PIN
-        case State::IDLE:
-            // sensor is in standby; fire it up and sleep
-            LOG_DEBUG("runOnce(): state = idle");
-            digitalWrite(PMSA003I_ENABLE_PIN, HIGH);
-            state = State::ACTIVE;
-
-            return PMSA003I_WARMUP_MS;
-#endif /* PMSA003I_ENABLE_PIN */
-        case State::ACTIVE:
-            // sensor is already warmed up; grab telemetry and send it
-            LOG_DEBUG("runOnce(): state = active");
-
-            if (((lastSentToMesh == 0) ||
-                 !Throttle::isWithinTimespanMs(lastSentToMesh, Default::getConfiguredOrDefaultMsScaled(
-                                                                   moduleConfig.telemetry.air_quality_interval,
-                                                                   default_telemetry_broadcast_interval_secs, numOnlineNodes))) &&
-                airTime->isTxAllowedChannelUtil(config.device.role != meshtastic_Config_DeviceConfig_Role_SENSOR) &&
-                airTime->isTxAllowedAirUtil()) {
-                sendTelemetry();
-                lastSentToMesh = millis();
-            } else if (service->isToPhoneQueueEmpty()) {
-                // Just send to phone when it's not our time to send to mesh yet
-                // Only send while queue is empty (phone assumed connected)
-                sendTelemetry(NODENUM_BROADCAST, true);
-            }
-
-#ifdef PMSA003I_ENABLE_PIN
-            // put sensor back to sleep
-            digitalWrite(PMSA003I_ENABLE_PIN, LOW);
-            state = State::IDLE;
-#endif /* PMSA003I_ENABLE_PIN */
-
-            return sendToPhoneIntervalMs;
-        default:
+        if (!moduleConfig.telemetry.air_quality_enabled && !AIR_QUALITY_TELEMETRY_MODULE_ENABLE) {
             return disable();
         }
+
+        // Wake up the sensors that need it
+#ifdef PMSA003I_ENABLE_PIN
+        if (pmsa003iSensor.hasSensor() && pmsa003iSensor.state == pmsa003iSensor::State::IDLE)
+            return pmsa003iSensor.wakeUp();
+#endif /* PMSA003I_ENABLE_PIN */
+
+        if (((lastSentToMesh == 0) ||
+            !Throttle::isWithinTimespanMs(lastSentToMesh, Default::getConfiguredOrDefaultMsScaled(
+                                                            moduleConfig.telemetry.air_quality_interval,
+                                                            default_telemetry_broadcast_interval_secs, numOnlineNodes))) &&
+            airTime->isTxAllowedChannelUtil(config.device.role != meshtastic_Config_DeviceConfig_Role_SENSOR) &&
+            airTime->isTxAllowedAirUtil()) {
+            sendTelemetry();
+            lastSentToMesh = millis();
+        } else if (((lastSentToPhone == 0) || !Throttle::isWithinTimespanMs(lastSentToPhone, sendToPhoneIntervalMs)) &&
+                (service->isToPhoneQueueEmpty())) {
+            // Just send to phone when it's not our time to send to mesh yet
+            // Only send while queue is empty (phone assumed connected)
+            sendTelemetry(NODENUM_BROADCAST, true);
+            lastSentToPhone = millis();
+        }
+
+#ifdef PMSA003I_ENABLE_PIN
+        pmsa003iSensor.sleep();
+#endif /* PMSA003I_ENABLE_PIN */
+
+    }
+    return min(sendToPhoneIntervalMs, result);
+}
+
+bool AirQualityTelemetryModule::wantUIFrame()
+{
+    return moduleConfig.telemetry.environment_screen_enabled;
+}
+
+void AirQualityTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    // === Setup display ===
+    display->clear();
+    display->setFont(FONT_SMALL);
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    int line = 1;
+
+    // === Set Title
+    const char *titleStr = (graphics::isHighResolution) ? "Environment" : "Env.";
+
+    // === Header ===
+    graphics::drawCommonHeader(display, x, y, titleStr);
+
+    // === Row spacing setup ===
+    const int rowHeight = FONT_HEIGHT_SMALL - 4;
+    int currentY = graphics::getTextPositions(display)[line++];
+
+    // === Show "No Telemetry" if no data available ===
+    if (!lastMeasurementPacket) {
+        display->drawString(x, currentY, "No Telemetry");
+        return;
+    }
+
+    // Decode the telemetry message from the latest received packet
+    const meshtastic_Data &p = lastMeasurementPacket->decoded;
+    meshtastic_Telemetry telemetry;
+    if (!pb_decode_from_bytes(p.payload.bytes, p.payload.size, &meshtastic_Telemetry_msg, &telemetry)) {
+        display->drawString(x, currentY, "No Telemetry");
+        return;
+    }
+
+    const auto &m = telemetry.variant.air_quality_metrics;
+
+    // Check if any telemetry field has valid data
+    bool hasAny = m.has_pm10_standard || m.has_pm25_standard || m.has_pm100_standard  || m.has_pm10_environmental || m.has_pm25_environmental ||
+                  m.has_pm100_environmental;
+
+    if (!hasAny) {
+        display->drawString(x, currentY, "No Telemetry");
+        return;
+    }
+
+    // === First line: Show sender name + time since received (left), and first metric (right) ===
+    const char *sender = getSenderShortName(*lastMeasurementPacket);
+    uint32_t agoSecs = service->GetTimeSinceMeshPacket(lastMeasurementPacket);
+    String agoStr = (agoSecs > 864000) ? "?"
+                    : (agoSecs > 3600) ? String(agoSecs / 3600) + "h"
+                    : (agoSecs > 60)   ? String(agoSecs / 60) + "m"
+                                       : String(agoSecs) + "s";
+
+    String leftStr = String(sender) + " (" + agoStr + ")";
+    display->drawString(x, currentY, leftStr); // Left side: who and when
+
+    // === Collect sensor readings as label strings (no icons) ===
+    std::vector<String> entries;
+
+    if (m.has_pm10_standard)
+        entries.push_back("PM1.0: " + String(m.pm10_standard, 0) + "ug/m3");
+    if (m.has_pm25_standard)
+        entries.push_back("PM2.5: " + String(m.pm25_standard, 0) + "ug/m3");
+    if (m.has_pm100_standard)
+        entries.push_back("PM10.0: " + String(m.pm100_standard, 0) + "ug/m3");
+
+    // === Show first available metric on top-right of first line ===
+    if (!entries.empty()) {
+        String valueStr = entries.front();
+        int rightX = SCREEN_WIDTH - display->getStringWidth(valueStr);
+        display->drawString(rightX, currentY, valueStr);
+        entries.erase(entries.begin()); // Remove from queue
+    }
+
+    // === Advance to next line for remaining telemetry entries ===
+    currentY += rowHeight;
+
+    // === Draw remaining entries in 2-column format (left and right) ===
+    for (size_t i = 0; i < entries.size(); i += 2) {
+        // Left column
+        display->drawString(x, currentY, entries[i]);
+
+        // Right column if it exists
+        if (i + 1 < entries.size()) {
+            int rightX = SCREEN_WIDTH / 2;
+            display->drawString(rightX, currentY, entries[i + 1]);
+        }
+
+        currentY += rowHeight;
     }
 }
 
@@ -142,37 +222,23 @@ bool AirQualityTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPack
     return false; // Let others look at this message also if they want
 }
 
+// CHECKED
 bool AirQualityTelemetryModule::getAirQualityTelemetry(meshtastic_Telemetry *m)
 {
-    if (!aqi.read(&data)) {
-        LOG_WARN("Skip send measurements. Could not read AQIn");
-        return false;
-    }
-
+    bool valid = true;
+    bool hasSensor = false;
     m->time = getTime();
     m->which_variant = meshtastic_Telemetry_air_quality_metrics_tag;
-    m->variant.air_quality_metrics.has_pm10_standard = true;
-    m->variant.air_quality_metrics.pm10_standard = data.pm10_standard;
-    m->variant.air_quality_metrics.has_pm25_standard = true;
-    m->variant.air_quality_metrics.pm25_standard = data.pm25_standard;
-    m->variant.air_quality_metrics.has_pm100_standard = true;
-    m->variant.air_quality_metrics.pm100_standard = data.pm100_standard;
+    m->variant.air_quality_metrics = meshtastic_AirQualityMetrics_init_zero;
 
-    m->variant.air_quality_metrics.has_pm10_environmental = true;
-    m->variant.air_quality_metrics.pm10_environmental = data.pm10_env;
-    m->variant.air_quality_metrics.has_pm25_environmental = true;
-    m->variant.air_quality_metrics.pm25_environmental = data.pm25_env;
-    m->variant.air_quality_metrics.has_pm100_environmental = true;
-    m->variant.air_quality_metrics.pm100_environmental = data.pm100_env;
+    if (pmsa003iSensor.hasSensor()) {
+        // TODO - Should we check for sensor state here?
+        // If a sensor is sleeping, we should know and check to wake it up
+        valid = valid && pmsa003iSensor.getMetrics(m);
+        hasSensor = true;
+    }
 
-    LOG_INFO("Send: PM1.0(Standard)=%i, PM2.5(Standard)=%i, PM10.0(Standard)=%i", m->variant.air_quality_metrics.pm10_standard,
-             m->variant.air_quality_metrics.pm25_standard, m->variant.air_quality_metrics.pm100_standard);
-
-    LOG_INFO("         | PM1.0(Environmental)=%i, PM2.5(Environmental)=%i, PM10.0(Environmental)=%i",
-             m->variant.air_quality_metrics.pm10_environmental, m->variant.air_quality_metrics.pm25_environmental,
-             m->variant.air_quality_metrics.pm100_environmental);
-
-    return true;
+    return valid && hasSensor;
 }
 
 meshtastic_MeshPacket *AirQualityTelemetryModule::allocReply()
@@ -206,7 +272,14 @@ meshtastic_MeshPacket *AirQualityTelemetryModule::allocReply()
 bool AirQualityTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 {
     meshtastic_Telemetry m = meshtastic_Telemetry_init_zero;
+    m.which_variant = meshtastic_Telemetry_air_quality_metrics_tag;
+    m.time = getTime();
     if (getAirQualityTelemetry(&m)) {
+        LOG_INFO("Send: pm10_standard=%f, pm25_standard=%f, pm100_standard=%f, pm10_environmental=%f, pm100_environmental=%f",
+                 m.variant.air_quality_metrics.pm10_standard, m.variant.air_quality_metrics.pm25_standard,
+                 m.variant.air_quality_metrics.pm100_standard, m.variant.air_quality_metrics.pm10_environmental,
+                 m.variant.air_quality_metrics.pm100_environmental);
+
         meshtastic_MeshPacket *p = allocDataProtobuf(m);
         p->to = dest;
         p->decoded.want_response = false;
@@ -221,16 +294,46 @@ bool AirQualityTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 
         lastMeasurementPacket = packetPool.allocCopy(*p);
         if (phoneOnly) {
-            LOG_INFO("Send packet to phone");
+            LOG_INFO("Sending packet to phone");
             service->sendToPhone(p);
         } else {
-            LOG_INFO("Send packet to mesh");
+            LOG_INFO("Sending packet to mesh");
             service->sendToMesh(p, RX_SRC_LOCAL, true);
+
+            if (config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR && config.power.is_power_saving) {
+                meshtastic_ClientNotification *notification = clientNotificationPool.allocZeroed();
+                notification->level = meshtastic_LogRecord_Level_INFO;
+                notification->time = getValidTime(RTCQualityFromNet);
+                sprintf(notification->message, "Sending telemetry and sleeping for %us interval in a moment",
+                        Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.air_quality_interval,
+                                                          default_telemetry_broadcast_interval_secs) /
+                            1000U);
+                service->sendClientNotification(notification);
+                sleepOnNextExecution = true;
+                LOG_DEBUG("Start next execution in 5s, then sleep");
+                setIntervalFromNow(FIVE_SECONDS_MS);
+            }
         }
         return true;
     }
-
     return false;
 }
 
+AdminMessageHandleResult AirQualityTelemetryModule::handleAdminMessageForModule(const meshtastic_MeshPacket &mp,
+                                                                                 meshtastic_AdminMessage *request,
+                                                                                 meshtastic_AdminMessage *response)
+{
+    AdminMessageHandleResult result = AdminMessageHandleResult::NOT_HANDLED;
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL
+    if (pmsa003iSensor.hasSensor()) {
+        result = pmsa003iSensor.handleAdminMessage(mp, request, response);
+        if (result != AdminMessageHandleResult::NOT_HANDLED)
+            return result;
+    }
+
+
+#endif
+    return result;
+}
+
 #endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/AirQualityTelemetry.h b/src/modules/Telemetry/AirQualityTelemetry.h
index 0142ee686..8314c54bc 100644
--- a/src/modules/Telemetry/AirQualityTelemetry.h
+++ b/src/modules/Telemetry/AirQualityTelemetry.h
@@ -1,12 +1,18 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include("Adafruit_PM25AQI.h")
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 
 #pragma once
+
+#ifndef AIR_QUALITY_TELEMETRY_MODULE_ENABLE
+#define AIR_QUALITY_TELEMETRY_MODULE_ENABLE 0
+#endif
+
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
-#include "Adafruit_PM25AQI.h"
 #include "NodeDB.h"
 #include "ProtobufModule.h"
+#include <OLEDDisplay.h>
+#include <OLEDDisplayUi.h>
 
 class AirQualityTelemetryModule : private concurrency::OSThread, public ProtobufModule<meshtastic_Telemetry>
 {
@@ -20,18 +26,15 @@ class AirQualityTelemetryModule : private concurrency::OSThread, public Protobuf
           ProtobufModule("AirQualityTelemetry", meshtastic_PortNum_TELEMETRY_APP, &meshtastic_Telemetry_msg)
     {
         lastMeasurementPacket = nullptr;
-        setIntervalFromNow(10 * 1000);
-        aqi = Adafruit_PM25AQI();
         nodeStatusObserver.observe(&nodeStatus->onNewStatus);
-
-#ifdef PMSA003I_ENABLE_PIN
-        // the PMSA003I sensor uses about 300mW on its own; support powering it off when it's not actively taking
-        // a reading
-        state = State::IDLE;
-#else
-        state = State::ACTIVE;
-#endif
+        setIntervalFromNow(10 * 1000);
     }
+    virtual bool wantUIFrame() override;
+#if !HAS_SCREEN
+    void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y);
+#else
+    virtual void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) override;
+#endif
 
   protected:
     /** Called to handle a particular incoming message
@@ -49,19 +52,15 @@ class AirQualityTelemetryModule : private concurrency::OSThread, public Protobuf
      */
     bool sendTelemetry(NodeNum dest = NODENUM_BROADCAST, bool wantReplies = false);
 
+    virtual AdminMessageHandleResult handleAdminMessageForModule(const meshtastic_MeshPacket &mp,
+                                                                 meshtastic_AdminMessage *request,
+                                                                 meshtastic_AdminMessage *response) override;
   private:
-    enum State {
-        IDLE = 0,
-        ACTIVE = 1,
-    };
-
-    State state;
-    Adafruit_PM25AQI aqi;
-    PM25_AQI_Data data = {0};
     bool firstTime = true;
     meshtastic_MeshPacket *lastMeasurementPacket;
     uint32_t sendToPhoneIntervalMs = SECONDS_IN_MINUTE * 1000; // Send to phone every minute
     uint32_t lastSentToMesh = 0;
+    uint32_t lastSentToPhone = 0;
 };
 
 #endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/EnvironmentTelemetry.cpp b/src/modules/Telemetry/EnvironmentTelemetry.cpp
index d1b10fa82..2d6a8a0cb 100644
--- a/src/modules/Telemetry/EnvironmentTelemetry.cpp
+++ b/src/modules/Telemetry/EnvironmentTelemetry.cpp
@@ -743,8 +743,6 @@ bool EnvironmentTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
         LOG_INFO("Send: soil_temperature=%f, soil_moisture=%u", m.variant.environment_metrics.soil_temperature,
                  m.variant.environment_metrics.soil_moisture);
 
-        sensor_read_error_count = 0;
-
         meshtastic_MeshPacket *p = allocDataProtobuf(m);
         p->to = dest;
         p->decoded.want_response = false;
diff --git a/src/modules/Telemetry/EnvironmentTelemetry.h b/src/modules/Telemetry/EnvironmentTelemetry.h
index d70c063fc..ffbb229f0 100644
--- a/src/modules/Telemetry/EnvironmentTelemetry.h
+++ b/src/modules/Telemetry/EnvironmentTelemetry.h
@@ -62,7 +62,6 @@ class EnvironmentTelemetryModule : private concurrency::OSThread, public Protobu
     uint32_t sendToPhoneIntervalMs = SECONDS_IN_MINUTE * 1000; // Send to phone every minute
     uint32_t lastSentToMesh = 0;
     uint32_t lastSentToPhone = 0;
-    uint32_t sensor_read_error_count = 0;
 };
 
 #endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/PMSA003ISensor.cpp b/src/modules/Telemetry/Sensor/PMSA003ISensor.cpp
new file mode 100644
index 000000000..dacdf5ff4
--- /dev/null
+++ b/src/modules/Telemetry/Sensor/PMSA003ISensor.cpp
@@ -0,0 +1,89 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_PM25AQI.h>)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "PMSA003ISensor.h"
+#include "TelemetrySensor.h"
+#include "detect/ScanI2CTwoWire.h"
+#include <Adafruit_PM25AQI.h>
+
+PMSA003ISensor::PMSA003ISensor() : TelemetrySensor(meshtastic_TelemetrySensorType_PMSA003I, "PMSA003I") {}
+
+int32_t PMSA003ISensor::runOnce()
+{
+    LOG_INFO("Init sensor: %s", sensorName);
+    if (!hasSensor()) {
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+
+#ifdef PMSA003I_ENABLE_PIN
+// TODO not sure why this was like this
+    sleep();
+#endif /* PMSA003I_ENABLE_PIN */
+
+    if (!pmsa003i.begin_I2C()){
+#ifndef I2C_NO_RESCAN
+        LOG_WARN("Could not establish i2c connection to AQI sensor. Rescan");
+        // rescan for late arriving sensors. AQI Module starts about 10 seconds into the boot so this is plenty.
+        uint8_t i2caddr_scan[] = {PMSA0031_ADDR};
+        uint8_t i2caddr_asize = 1;
+        auto i2cScanner = std::unique_ptr<ScanI2CTwoWire>(new ScanI2CTwoWire());
+#if defined(I2C_SDA1)
+        i2cScanner->scanPort(ScanI2C::I2CPort::WIRE1, i2caddr_scan, i2caddr_asize);
+#endif
+        i2cScanner->scanPort(ScanI2C::I2CPort::WIRE, i2caddr_scan, i2caddr_asize);
+        auto found = i2cScanner->find(ScanI2C::DeviceType::PMSA0031);
+        if (found.type != ScanI2C::DeviceType::NONE) {
+            nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_PMSA003I].first = found.address.address;
+            nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_PMSA003I].second =
+                i2cScanner->fetchI2CBus(found.address);
+            return initI2CSensor();
+        }
+#endif
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+    return initI2CSensor();
+}
+
+void PMSA003ISensor::setup()
+{
+}
+
+#ifdef PMSA003I_ENABLE_PIN
+void sleep() {
+    digitalWrite(PMSA003I_ENABLE_PIN, LOW);
+    state = State::IDLE;
+}
+
+uint32_t wakeUp() {
+    digitalWrite(PMSA003I_ENABLE_PIN, HIGH);
+    state = State::ACTIVE;
+}
+#endif /* PMSA003I_ENABLE_PIN */
+
+bool PMSA003ISensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    if (!pmsa003i.read(&pmsa003iData)) {
+        LOG_WARN("Skip send measurements. Could not read AQIn");
+        return false;
+    }
+
+    measurement->variant.air_quality_metrics.has_pm10_standard = true;
+    measurement->variant.air_quality_metrics.pm10_standard = pmsa003iData.pm10_standard;
+    measurement->variant.air_quality_metrics.has_pm25_standard = true;
+    measurement->variant.air_quality_metrics.pm25_standard = pmsa003iData.pm25_standard;
+    measurement->variant.air_quality_metrics.has_pm100_standard = true;
+    measurement->variant.air_quality_metrics.pm100_standard = pmsa003iData.pm100_standard;
+
+    measurement->variant.air_quality_metrics.has_pm10_environmental = true;
+    measurement->variant.air_quality_metrics.pm10_environmental = pmsa003iData.pm10_env;
+    measurement->variant.air_quality_metrics.has_pm25_environmental = true;
+    measurement->variant.air_quality_metrics.pm25_environmental = pmsa003iData.pm25_env;
+    measurement->variant.air_quality_metrics.has_pm100_environmental = true;
+    measurement->variant.air_quality_metrics.pm100_environmental = pmsa003iData.pm100_env;
+
+    return true;
+}
+
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/PMSA003ISensor.h b/src/modules/Telemetry/Sensor/PMSA003ISensor.h
new file mode 100644
index 000000000..01b04368e
--- /dev/null
+++ b/src/modules/Telemetry/Sensor/PMSA003ISensor.h
@@ -0,0 +1,52 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && __has_include(<Adafruit_PM25AQI.h>)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "TelemetrySensor.h"
+#include "detect/ScanI2CTwoWire.h"
+#include <Adafruit_PM25AQI.h>
+
+#ifndef PMSA003I_WARMUP_MS
+// from the PMSA003I datasheet:
+// "Stable data should be got at least 30 seconds after the sensor wakeup
+// from the sleep mode because of the fan’s performance."
+#define PMSA003I_WARMUP_MS 30000
+#endif
+
+class PMSA003ISensor : public TelemetrySensor
+{
+  private:
+    Adafruit_PM25AQI pmsa003i = Adafruit_PM25AQI();
+    PM25_AQI_Data pmsa003iData = {0};
+
+#ifdef PMSA003I_ENABLE_PIN
+    void sleep();
+    uint32_t wakeUp();
+#endif
+
+  protected:
+    virtual void setup() override;
+
+  public:
+    enum State {
+        IDLE = 0,
+        ACTIVE = 1,
+    };
+
+#ifdef PMSA003I_ENABLE_PIN
+    // the PMSA003I sensor uses about 300mW on its own; support powering it off when it's not actively taking
+    // a reading
+    // put the sensor to sleep on startup
+    pinMode(PMSA003I_ENABLE_PIN, OUTPUT);
+    State state = State::IDLE;
+#else
+    State state = State::ACTIVE;
+#endif
+
+    PMSA003ISensor();
+    virtual int32_t runOnce() override;
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+};
+
+#endif
\ No newline at end of file