diff --git a/platformio.ini b/platformio.ini
index e60f0d7b9..172fb2418 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -39,7 +39,7 @@ default_envs = tbeam
 ;default_envs = heltec_vision_master_e213
 ;default_envs = heltec_vision_master_e290
 ;default_envs = heltec_mesh_node_t114
-
+;default_envs = m5stack-corebasic
 extra_configs =
   arch/*/*.ini
   variants/*/platformio.ini
diff --git a/src/ButtonThread.cpp b/src/ButtonThread.cpp
index 1b101044f..e4b248ce4 100644
--- a/src/ButtonThread.cpp
+++ b/src/ButtonThread.cpp
@@ -13,7 +13,9 @@
 #ifdef ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
 #endif
-
+#if  defined(M5STACK_COREBASIC) 
+#include <M5Unified.h>
+#endif
 #define DEBUG_BUTTONS 0
 #if DEBUG_BUTTONS
 #define LOG_BUTTON(...) LOG_DEBUG(__VA_ARGS__)
@@ -124,6 +126,9 @@ int32_t ButtonThread::runOnce()
         switch (btnEvent) {
         case BUTTON_EVENT_PRESSED: {
             LOG_BUTTON("press!\n");
+#if  defined(M5STACK_COREBASIC) 
+            M5.Speaker.tone(1000, 100);
+#endif
 #ifdef BUTTON_PIN
             if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) !=
                  moduleConfig.canned_message.inputbroker_pin_press) ||
@@ -144,6 +149,9 @@ int32_t ButtonThread::runOnce()
 
         case BUTTON_EVENT_DOUBLE_PRESSED: {
             LOG_BUTTON("Double press!\n");
+#if  defined(M5STACK_COREBASIC) 
+            M5.Speaker.tone(2000, 100);
+#endif
             service->refreshLocalMeshNode();
             auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
             if (screen) {
@@ -185,6 +193,9 @@ int32_t ButtonThread::runOnce()
 
         case BUTTON_EVENT_LONG_PRESSED: {
             LOG_BUTTON("Long press!\n");
+#if  defined(M5STACK_COREBASIC) 
+            M5.Speaker.tone(3000, 300);
+#endif
             powerFSM.trigger(EVENT_PRESS);
             if (screen) {
                 screen->startAlert("Shutting down...");
@@ -197,6 +208,9 @@ int32_t ButtonThread::runOnce()
         // may wake the board immediatedly.
         case BUTTON_EVENT_LONG_RELEASED: {
             LOG_INFO("Shutdown from long press\n");
+#if  defined(M5STACK_COREBASIC) 
+            M5.Speaker.tone(4000, 300);
+#endif
             playShutdownMelody();
             delay(3000);
             power->shutdown();
diff --git a/src/graphics/Screen.cpp b/src/graphics/Screen.cpp
index 3a4db6ee0..895552746 100644
--- a/src/graphics/Screen.cpp
+++ b/src/graphics/Screen.cpp
@@ -62,7 +62,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #if ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
 #endif
-
+#if defined(M5STACK_COREBASIC)  
+#include "M5Unified.h"
+extern  DataInfo DataRegion;
+#endif
 using namespace meshtastic; /** @todo remove */
 
 namespace graphics
@@ -949,7 +952,26 @@ bool deltaToTimestamp(uint32_t secondsAgo, uint8_t *hours, uint8_t *minutes, int
     validCached = true;
     return validCached;
 }
-
+#if defined(M5STACK_COREBASIC)
+static void drawLoraMessage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y){
+    display->clear();
+    display->drawString(x + 0, y + 0, myRegion->name);
+    display->setFont(FONT_MEDIUM);
+    display->drawString(x + 10, y + 30,"channel: "+String(DataRegion.lora_channel_num+1));
+    display->drawString(x + 10, y + 60,"bw: "+ String(DataRegion.lora_bw));
+    display->drawString(x + SCREEN_WIDTH/2+10, y+30,"freq: "+String(DataRegion.lora_freq));
+    display->drawString(x + SCREEN_WIDTH/2+10, y+60,"power: "+ String(DataRegion.lora_power_output));
+    display->drawString(x + 10, y + 90,"sf: "+String(DataRegion.lora_sf));
+     display->drawString(x + SCREEN_WIDTH/2+10, y+90,"cr: 4/:"+ String(DataRegion.lora_cr));
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    const char *title = "LoRa";
+    display->drawString(x + SCREEN_WIDTH/2-20, y +0, title);
+    display->setFont(FONT_SMALL);
+    display->setTextAlignment(TEXT_ALIGN_RIGHT);
+    display->drawString(x + SCREEN_WIDTH, y,String(DataRegion.lora_channel_name));
+    display->setTextAlignment(TEXT_ALIGN_LEFT); // Restore left align, just to be kind to any other unsuspecting code
+}
+#endif
 /// Draw the last text message we received
 static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
@@ -968,7 +990,11 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
     display->setFont(FONT_SMALL);
     if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
         display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
-        display->setColor(BLACK);
+#if defined(M5STACK_COREBASIC)  
+    display->setColor(OLEDDISPLAY_COLOR::BLACK);
+#else
+    display->setColor(BLACK);
+#endif
     }
 
     // For time delta
@@ -1002,7 +1028,11 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state
         }
     }
 
+#if defined(M5STACK_COREBASIC)  
+    display->setColor(OLEDDISPLAY_COLOR::WHITE);
+#else
     display->setColor(WHITE);
+#endif
 #ifndef EXCLUDE_EMOJI
     if (strcmp(reinterpret_cast<const char *>(mp.decoded.payload.bytes), u8"\U0001F44D") == 0) {
         display->drawXbm(x + (SCREEN_WIDTH - thumbs_width) / 2,
@@ -1075,10 +1105,15 @@ void Screen::drawColumns(OLEDDisplay *display, int16_t x, int16_t y, const char
     int xo = x, yo = y;
     while (*f) {
         display->drawString(xo, yo, *f);
+#if defined(M5STACK_COREBASIC)  
+        if ((display->getColor() == OLEDDISPLAY_COLOR::BLACK) && config.display.heading_bold)
+            display->drawString(xo + 1, yo, *f);
+        display->setColor(OLEDDISPLAY_COLOR::WHITE);
+#else
         if ((display->getColor() == BLACK) && config.display.heading_bold)
             display->drawString(xo + 1, yo, *f);
-
         display->setColor(WHITE);
+#endif
         yo += FONT_HEIGHT_SMALL;
         if (yo > SCREEN_HEIGHT - FONT_HEIGHT_SMALL) {
             xo += SCREEN_WIDTH / 2;
@@ -1487,7 +1522,11 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_
     display->drawCircle(compassX, compassY, compassDiam / 2);
 
     if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
+#if defined(M5STACK_COREBASIC)  
+        display->setColor(OLEDDISPLAY_COLOR::BLACK);
+#else
         display->setColor(BLACK);
+#endif
     }
     // Must be after distStr is populated
     screen->drawColumns(display, x, y, fields);
@@ -2103,7 +2142,13 @@ void Screen::setFrames(FrameFocus focus)
     fsi.positions.textMessage = numframes;
     if (devicestate.has_rx_text_message && shouldDrawMessage(&devicestate.rx_text_message)) {
         normalFrames[numframes++] = drawTextMessageFrame;
+#if defined(M5STACK_COREBASIC)  
+        M5.Speaker.tone(3000, 400);
+#endif
     }
+#if defined(M5STACK_COREBASIC)  
+    normalFrames[numframes++] = drawLoraMessage;
+#endif
 
     // then all the nodes
     // We only show a few nodes in our scrolling list - because meshes with many nodes would have too many screens
@@ -2365,7 +2410,11 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
 
     if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
         display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+#if defined(M5STACK_COREBASIC)  
+        display->setColor(OLEDDISPLAY_COLOR::BLACK);
+#else
         display->setColor(BLACK);
+#endif
     }
 
     char channelStr[20];
@@ -2406,7 +2455,11 @@ void DebugInfo::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16
         }
     }
 #endif
-    display->setColor(WHITE);
+#if defined(M5STACK_COREBASIC)  
+        display->setColor(OLEDDISPLAY_COLOR::WHITE);
+#else
+        display->setColor(WHITE);
+#endif
     // Draw the channel name
     display->drawString(x, y + FONT_HEIGHT_SMALL, channelStr);
     // Draw our hardware ID to assist with bluetooth pairing. Either prefix with Info or S&F Logo
@@ -2477,7 +2530,11 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
 
     if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
         display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+#if defined(M5STACK_COREBASIC)  
+        display->setColor(OLEDDISPLAY_COLOR::BLACK);
+#else
         display->setColor(BLACK);
+#endif
     }
 
     if (WiFi.status() != WL_CONNECTED) {
@@ -2497,7 +2554,11 @@ void DebugInfo::drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, i
         }
     }
 
-    display->setColor(WHITE);
+#if defined(M5STACK_COREBASIC)  
+        display->setColor(OLEDDISPLAY_COLOR::WHITE);
+#else
+        display->setColor(WHITE);
+#endif
 
     /*
     - WL_CONNECTED: assigned when connected to a WiFi network;
@@ -2557,7 +2618,11 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
 
     if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
         display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+#if defined(M5STACK_COREBASIC)  
+        display->setColor(OLEDDISPLAY_COLOR::BLACK);
+#else
         display->setColor(BLACK);
+#endif
     }
 
     char batStr[20];
@@ -2596,7 +2661,11 @@ void DebugInfo::drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *stat
     // minutes %= 60;
     // hours %= 24;
 
+#if defined(M5STACK_COREBASIC)  
+    display->setColor(OLEDDISPLAY_COLOR::WHITE);
+#else
     display->setColor(WHITE);
+#endif
 
     // Show uptime as days, hours, minutes OR seconds
     std::string uptime = screen->drawTimeDelta(days, hours, minutes, seconds);
diff --git a/src/graphics/TFTDisplay.cpp b/src/graphics/TFTDisplay.cpp
index 8ea90c523..dc43e900a 100644
--- a/src/graphics/TFTDisplay.cpp
+++ b/src/graphics/TFTDisplay.cpp
@@ -311,7 +311,11 @@ class LGFX : public lgfx::LGFX_Device
             cfg.dummy_read_pixel = 8;      // Number of bits for dummy read before pixel readout
             cfg.dummy_read_bits = 1;       // Number of bits for dummy read before non-pixel data read
             cfg.readable = true;           // Set to true if data can be read
+#if defined(M5STACK_COREBASIC)
+            cfg.invert = true;            // Set to true if the light/darkness of the panel is reversed
+#else
             cfg.invert = false;            // Set to true if the light/darkness of the panel is reversed
+#endif
             cfg.rgb_order = false;         // Set to true if the panel's red and blue are swapped
             cfg.dlen_16bit =
                 false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
@@ -586,7 +590,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 #elif defined(ST7735_BL_V05)
         pinMode(ST7735_BL_V05, OUTPUT);
         digitalWrite(ST7735_BL_V05, TFT_BACKLIGHT_ON);
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(M5STACK_COREBASIC)
         tft->wakeup();
         tft->powerSaveOff();
 #elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
@@ -604,7 +608,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(true); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(ST7789_CS) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
+#elif !defined(M5STACK) && !defined(ST7789_CS) && !defined(M5STACK_COREBASIC)// T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
 #endif
         break;
@@ -619,7 +623,7 @@ void TFTDisplay::sendCommand(uint8_t com)
 #elif defined(ST7735_BL_V05)
         pinMode(ST7735_BL_V05, OUTPUT);
         digitalWrite(ST7735_BL_V05, !TFT_BACKLIGHT_ON);
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(M5STACK_COREBASIC)
         tft->sleep();
         tft->powerSaveOn();
 #elif defined(TFT_BL) && defined(TFT_BACKLIGHT_ON)
@@ -636,7 +640,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(false); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK)
+#elif !defined(M5STACK) || !defined(M5STACK_COREBASIC)
         tft->setBrightness(0);
 #endif
         break;
@@ -670,7 +674,7 @@ bool TFTDisplay::hasTouch(void)
 {
 #ifdef RAK14014
     return true;
-#elif !defined(M5STACK)
+#elif !defined(M5STACK) || !defined(M5STACK_COREBASIC)
     return tft->touch() != nullptr;
 #else
     return false;
@@ -689,7 +693,7 @@ bool TFTDisplay::getTouch(int16_t *x, int16_t *y)
     } else {
         return false;
     }
-#elif !defined(M5STACK)
+#elif !defined(M5STACK) || !defined(M5STACK_COREBASIC)
     return tft->getTouch(x, y);
 #else
     return false;
@@ -733,7 +737,7 @@ bool TFTDisplay::connect()
 
     tft->init();
 
-#if defined(M5STACK)
+#if defined(M5STACK) || defined(M5STACK_COREBASIC)
     tft->setRotation(0);
 #elif defined(RAK14014)
     tft->setRotation(1);
diff --git a/src/main.cpp b/src/main.cpp
index 7f45905d1..1142fd966 100644
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -111,7 +111,9 @@ AccelerometerThread *accelerometerThread = nullptr;
 #include "AudioThread.h"
 AudioThread *audioThread = nullptr;
 #endif
-
+#if defined(M5STACK_COREBASIC)
+#include <M5Unified.h>
+#endif
 using namespace concurrency;
 
 // We always create a screen object, but we only init it if we find the hardware
@@ -757,7 +759,14 @@ void setup()
     if (!pmu_found)
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_NO_AXP192); // Record a hardware fault for missing hardware
 #endif
-
+#if defined(M5STACK_COREBASIC) 
+    M5.begin();
+    M5.Speaker.tone(2000, 600);
+    M5.Display.init();
+    M5.Display.clearDisplay(); 
+    M5.Display.display(); 
+    M5.Display.fillScreen(TFT_BLACK);
+#endif
 #if !MESHTASTIC_EXCLUDE_I2C
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)
diff --git a/src/main.h b/src/main.h
index 52a3fff1f..99983acf8 100644
--- a/src/main.h
+++ b/src/main.h
@@ -42,7 +42,17 @@ extern bool isUSBPowered;
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL)
 extern ATECCX08A atecc;
 #endif
-
+#if defined(M5STACK_COREBASIC)  
+struct DataInfo {
+    int lora_channel_num;
+    double lora_freq;
+    const char* lora_channel_name;
+    int  lora_power_output;
+    float lora_bw;
+    int  lora_sf;
+    int lora_cr;
+};
+#endif
 #ifdef T_WATCH_S3
 #include <Adafruit_DRV2605.h>
 extern Adafruit_DRV2605 drv;
diff --git a/src/mesh/RadioInterface.cpp b/src/mesh/RadioInterface.cpp
index 262d2d6a9..689901dd2 100644
--- a/src/mesh/RadioInterface.cpp
+++ b/src/mesh/RadioInterface.cpp
@@ -11,7 +11,9 @@
 #include <assert.h>
 #include <pb_decode.h>
 #include <pb_encode.h>
-
+#if defined(M5STACK_COREBASIC)  
+DataInfo  DataRegion;
+#endif
 #define RDEF(name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, frequency_switching, wide_lora)      \
     {                                                                                                                            \
         meshtastic_Config_LoRaConfig_RegionCode_##name, freq_start, freq_end, duty_cycle, spacing, power_limit, audio_permitted, \
@@ -199,7 +201,10 @@ uint32_t RadioInterface::getPacketTime(uint32_t pl)
     float tPacket = tPreamble + tPayload;
 
     uint32_t msecs = tPacket * 1000;
-
+#if defined(M5STACK_COREBASIC)  
+    DataRegion.lora_sf=sf;
+    DataRegion.lora_cr=cr;
+#endif
     LOG_DEBUG("(bw=%d, sf=%d, cr=4/%d) packet symLen=%d ms, payloadSize=%u, time %d ms\n", (int)bw, sf, cr, (int)(tSym * 1000),
               pl, msecs);
     return msecs;
@@ -514,7 +519,13 @@ void RadioInterface::applyModemConfig()
 
     preambleTimeMsec = getPacketTime((uint32_t)0);
     maxPacketTimeMsec = getPacketTime(meshtastic_Constants_DATA_PAYLOAD_LEN + sizeof(PacketHeader));
-
+#if defined(M5STACK_COREBASIC)  
+    DataRegion.lora_channel_num=channel_num;
+    DataRegion.lora_freq=getFreq();
+    DataRegion.lora_channel_name=channelName;
+    DataRegion.lora_power_output=power;
+    DataRegion.lora_bw=bw;
+#endif
     LOG_INFO("Radio freq=%.3f, config.lora.frequency_offset=%.3f\n", freq, loraConfig.frequency_offset);
     LOG_INFO("Set radio: region=%s, name=%s, config=%u, ch=%d, power=%d\n", myRegion->name, channelName, loraConfig.modem_preset,
              channel_num, power);
diff --git a/src/mesh/generated/meshtastic/mesh.pb.h b/src/mesh/generated/meshtastic/mesh.pb.h
index 955484cb0..a0b9d4ede 100644
--- a/src/mesh/generated/meshtastic/mesh.pb.h
+++ b/src/mesh/generated/meshtastic/mesh.pb.h
@@ -187,6 +187,8 @@ typedef enum _meshtastic_HardwareModel {
     /* RadioMaster 900 Bandit, https://www.radiomasterrc.com/products/bandit-expresslrs-rf-module
  SSD1306 OLED and No GPS */
     meshtastic_HardwareModel_RADIOMASTER_900_BANDIT = 74,
+    /* M5 esp32 based MCU modules with enclosure, TFT and LORA Shields. All Variants (Basic, Core, Fire, Core2, Paper) https://m5stack.com/ */
+    meshtastic_HardwareModel_M5STACK_COREBASIC=75,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
diff --git a/src/platform/esp32/architecture.h b/src/platform/esp32/architecture.h
index fd3f92a9c..187cf4e46 100644
--- a/src/platform/esp32/architecture.h
+++ b/src/platform/esp32/architecture.h
@@ -159,6 +159,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_VISION_MASTER_E290
 #elif defined(HELTEC_MESH_NODE_T114)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_NODE_T114
+#elif defined(M5STACK_COREBASIC)
+#define HW_VENDOR meshtastic_HardwareModel_M5STACK_COREBASIC
 #endif
 
 // -----------------------------------------------------------------------------
diff --git a/variants/m5stack_corebasic/pins_arduino.h b/variants/m5stack_corebasic/pins_arduino.h
new file mode 100644
index 000000000..7e25669b7
--- /dev/null
+++ b/variants/m5stack_corebasic/pins_arduino.h
@@ -0,0 +1,13 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+static const uint8_t SDA = 21;
+static const uint8_t SCL = 22;
+
+static const uint8_t SS = 5;
+static const uint8_t MOSI = 23;
+static const uint8_t MISO = 19;
+static const uint8_t SCK = 18;
+#endif /* Pins_Arduino_h */
\ No newline at end of file
diff --git a/variants/m5stack_corebasic/platformio.ini b/variants/m5stack_corebasic/platformio.ini
new file mode 100644
index 000000000..aa92ea6db
--- /dev/null
+++ b/variants/m5stack_corebasic/platformio.ini
@@ -0,0 +1,25 @@
+[env:m5stack-corebasic]
+extends = esp32_base
+board = m5stack-core-esp32
+monitor_filters = esp32_exception_decoder
+build_src_filter = 
+  ${esp32_base.build_src_filter}
+build_flags = 
+  ${esp32_base.build_flags} -I variants/m5stack_corebasic
+
+  -DILI9341_DRIVER
+  -DM5STACK_COREBASIC
+  -DTFT_DRIVER=0x9341
+  -DTFT_MISO=19
+  -DTFT_MOSI=23
+  -DTFT_SCLK=18
+  -DTFT_CS=14
+  -DTFT_DC=27
+  -DTFT_RST=33
+  -DTFT_BL=32
+  -DSPI_FREQUENCY=40000000
+  -DSPI_READ_FREQUENCY=16000000
+lib_deps = 
+  ${esp32_base.lib_deps}
+  lovyan03/LovyanGFX@^1.1.8
+  m5stack/M5Unified@^0.1.14
\ No newline at end of file
diff --git a/variants/m5stack_corebasic/variant.h b/variants/m5stack_corebasic/variant.h
new file mode 100644
index 000000000..92dc58a65
--- /dev/null
+++ b/variants/m5stack_corebasic/variant.h
@@ -0,0 +1,50 @@
+// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+
+#define I2C_SDA 21
+#define I2C_SCL 22
+
+#define BUTTON_NEED_PULLUP
+// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Plugin.
+// Select Use the middle button, you can also use 39, 37
+#define BUTTON_PIN 38
+
+#define PIN_BUZZER 25
+// The Module used here is module-LORa433_V1.1. You can also use module-LORa868_V1.1
+// https://docs.m5stack.com/en/module/Module-LoRa433_V1.1
+// https://docs.m5stack.com/en/module/Module-LoRa868_V1.1
+#undef LORA_SCK
+#undef LORA_MISO
+#undef LORA_MOSI
+#undef LORA_CS
+
+#define LORA_SCK 18
+#define LORA_MISO 19
+#define LORA_MOSI 23
+#define LORA_CS 5   //NSS
+
+#define USE_RF95
+#define LORA_DIO0 35  // IRQ 
+#define LORA_RESET 13 // RST
+#define LORA_DIO1 RADIOLIB_NC // Not really used
+#define LORA_DIO2 RADIOLIB_NC // Not really used
+
+// The gnss module is used here     https://docs.m5stack.com/en/module/GNSS%20Module
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+#define GPS_RX_PIN 16
+#define GPS_TX_PIN 17
+
+
+//Note: If you use corebasic version 2.7 or later, 
+//you need to go to the src>graphics>TFTDisplay.cpp file to change the value of cfg.invert, 
+//this one is to set the color inversion
+#define TFT_HEIGHT 240
+#define TFT_WIDTH 320
+#define TFT_OFFSET_X 0
+#define TFT_OFFSET_Y 0
+#define TFT_BUSY -1
+
+// LCD screens are slow, so slowdown the wipe so it looks better
+#define SCREEN_TRANSITION_FRAMERATE 1 // fps
+
+#define ILI9341_SPI_HOST VSPI_HOST // VSPI_HOST or HSPI_HOST