This commit is contained in:
Ben Meadors 2023-01-21 19:24:33 -06:00
parent a421edce49
commit e2e7658789

View File

@ -34,7 +34,8 @@
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
extern "C"
{
#endif // __cplusplus
// Number of pins defined in PinDescription array
@ -55,9 +56,9 @@ extern "C" {
#define LED_STATE_ON 1 // State when LED is litted
/*
* Buttons
*/
/*
* Buttons
*/
#define PIN_BUTTON1 9 // Pin for button on E-ink button module or IO expansion
#define BUTTON_NEED_PULLUP
@ -77,14 +78,14 @@ extern "C" {
#define PIN_A6 (0xff)
#define PIN_A7 (0xff)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Other pins
@ -92,7 +93,7 @@ static const uint8_t A7 = PIN_A7;
#define PIN_NFC1 (9)
#define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
@ -117,14 +118,14 @@ static const uint8_t AREF = PIN_AREF;
#define PIN_SPI1_MOSI (30) // (0 + 30)
#define PIN_SPI1_SCK (3) // (0 + 3)
static const uint8_t SS = 42;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
static const uint8_t SS = 42;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
* eink display pins
*/
/*
* eink display pins
*/
#define PIN_EINK_EN (32 + 2) // (0 + 2) Note: this is really just backlight power
#define PIN_EINK_CS (0 + 26)
@ -136,7 +137,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
// Controls power for the eink display - Board power is enabled either by VBUS from USB or the CPU asserting PWR_ON
// FIXME - I think this is actually just the board power enable - it enables power to the CPU also
//#define PIN_EINK_PWR_ON (-1)
// #define PIN_EINK_PWR_ON (-1)
// #define USE_EINK