diff --git a/src/detect/ScanI2CTwoWire.cpp b/src/detect/ScanI2CTwoWire.cpp index 6e695c22f..a786f874d 100644 --- a/src/detect/ScanI2CTwoWire.cpp +++ b/src/detect/ScanI2CTwoWire.cpp @@ -458,11 +458,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) i2cBus->endTransmission(); len = i2cBus->readBytes(info, 5); if (len == 5 && memcmp(expectedInfo, info, len) == 0) { - LOG_INFO("NXP SE050 crypto chip found\n"); + LOG_INFO("NXP SE050 crypto chip found"); type = NXP_SE050; } else { - LOG_INFO("FT6336U touchscreen found\n"); + LOG_INFO("FT6336U touchscreen found"); type = FT6336U; } break; @@ -510,4 +510,4 @@ void ScanI2CTwoWire::logFoundDevice(const char *device, uint8_t address) { LOG_INFO("%s found at address 0x%x", device, address); } -#endif \ No newline at end of file +#endif diff --git a/src/input/MPR121Keyboard.cpp b/src/input/MPR121Keyboard.cpp index 078d80272..f35b942b1 100644 --- a/src/input/MPR121Keyboard.cpp +++ b/src/input/MPR121Keyboard.cpp @@ -87,7 +87,7 @@ uint8_t MPR121_KeyMap[12] = {2, 5, 8, 11, 1, 4, 7, 10, 0, 3, 6, 9}; MPR121Keyboard::MPR121Keyboard() : m_wire(nullptr), m_addr(0), readCallback(nullptr), writeCallback(nullptr) { - // LOG_DEBUG("MPR121 @ %02x\n", m_addr); + // LOG_DEBUG("MPR121 @ %02x", m_addr); state = Init; last_key = -1; last_tap = 0L; diff --git a/src/input/TouchScreenBase.cpp b/src/input/TouchScreenBase.cpp index a63203362..d2f7b54f8 100644 --- a/src/input/TouchScreenBase.cpp +++ b/src/input/TouchScreenBase.cpp @@ -113,13 +113,13 @@ int32_t TouchScreenBase::runOnce() if (_tapped) { _tapped = false; e.touchEvent = static_cast(TOUCH_ACTION_TAP); - LOG_DEBUG("action TAP(%d/%d)\n", _last_x, _last_y); + LOG_DEBUG("action TAP(%d/%d)", _last_x, _last_y); } } else { if (_tapped && (time_t(millis()) - _start) > TIME_LONG_PRESS - 50) { _tapped = false; e.touchEvent = static_cast(TOUCH_ACTION_TAP); - LOG_DEBUG("action TAP(%d/%d)\n", _last_x, _last_y); + LOG_DEBUG("action TAP(%d/%d)", _last_x, _last_y); } } #else @@ -156,4 +156,4 @@ void TouchScreenBase::hapticFeedback() drv.setWaveform(1, 0); // end waveform drv.go(); #endif -} \ No newline at end of file +} diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp index 54ea570ff..9dbe92b7c 100644 --- a/src/mesh/NodeDB.cpp +++ b/src/mesh/NodeDB.cpp @@ -1059,7 +1059,7 @@ void NodeDB::loadFromDisk() state = loadProto(uiconfigFileName, meshtastic_DeviceUIConfig_size, sizeof(meshtastic_DeviceUIConfig), &meshtastic_DeviceUIConfig_msg, &uiconfig); if (state == LoadFileResult::LOAD_SUCCESS) { - LOG_INFO("Loaded UIConfig\n"); + LOG_INFO("Loaded UIConfig"); } // 2.4.X - configuration migration to update new default intervals diff --git a/src/mesh/PhoneAPI.cpp b/src/mesh/PhoneAPI.cpp index c665c60bb..36045bcf9 100644 --- a/src/mesh/PhoneAPI.cpp +++ b/src/mesh/PhoneAPI.cpp @@ -201,7 +201,7 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) break; case STATE_SEND_UIDATA: - LOG_INFO("getFromRadio=STATE_SEND_UIDATA\n"); + LOG_INFO("getFromRadio=STATE_SEND_UIDATA"); fromRadioScratch.which_payload_variant = meshtastic_FromRadio_deviceuiConfig_tag; fromRadioScratch.deviceuiConfig = uiconfig; state = STATE_SEND_OWN_NODEINFO; @@ -664,4 +664,4 @@ int PhoneAPI::onNotify(uint32_t newValue) } return timeout ? -1 : 0; // If we timed out, MeshService should stop iterating through observers as we just removed one -} \ No newline at end of file +} diff --git a/src/modules/AdminModule.cpp b/src/modules/AdminModule.cpp index 7f737a205..6fd2952c0 100644 --- a/src/modules/AdminModule.cpp +++ b/src/modules/AdminModule.cpp @@ -176,7 +176,7 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta handleSetHamMode(r->set_ham_mode); break; case meshtastic_AdminMessage_get_ui_config_request_tag: { - LOG_INFO("Client is getting device-ui config\n"); + LOG_INFO("Client is getting device-ui config"); handleGetDeviceUIConfig(mp); handled = true; break; @@ -241,7 +241,7 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta break; } case meshtastic_AdminMessage_store_ui_config_tag: { - LOG_INFO("Storing device-ui config\n"); + LOG_INFO("Storing device-ui config"); handleStoreDeviceUIConfig(r->store_ui_config); break; } @@ -488,7 +488,7 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c) IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_ROUTER, meshtastic_Config_DeviceConfig_Role_REPEATER)) { config.device.rebroadcast_mode = meshtastic_Config_DeviceConfig_RebroadcastMode_ALL; - const char *warning = "Rebroadcast mode can't be set to NONE for a router or repeater\n"; + const char *warning = "Rebroadcast mode can't be set to NONE for a router or repeater"; LOG_WARN(warning); sendWarning(warning); } @@ -1149,4 +1149,4 @@ void disableBluetooth() nrf52Bluetooth->shutdown(); #endif #endif -} \ No newline at end of file +} diff --git a/src/motion/QMA6100PSensor.cpp b/src/motion/QMA6100PSensor.cpp index 4c5bc14d2..eb81e16c7 100644 --- a/src/motion/QMA6100PSensor.cpp +++ b/src/motion/QMA6100PSensor.cpp @@ -88,13 +88,13 @@ bool QMA6100PSingleton::init(ScanI2C::FoundDevice device) bool status = begin(device.address.address, &Wire); #endif if (status != true) { - LOG_WARN("QMA6100P init begin failed\n"); + LOG_WARN("QMA6100P init begin failed"); return false; } delay(20); // SW reset to make sure the device starts in a known state if (softwareReset() != true) { - LOG_WARN("QMA6100P init reset failed\n"); + LOG_WARN("QMA6100P init reset failed"); return false; } delay(20); @@ -180,4 +180,4 @@ bool QMA6100PSingleton::setWakeOnMotion() return true; } -#endif \ No newline at end of file +#endif diff --git a/variants/rak2560/RAK9154Sensor.cpp b/variants/rak2560/RAK9154Sensor.cpp index 9f660947e..43affe581 100644 --- a/variants/rak2560/RAK9154Sensor.cpp +++ b/variants/rak2560/RAK9154Sensor.cpp @@ -37,11 +37,11 @@ static void onewire_evt(const uint8_t pid, const uint8_t sid, const SNHUBAPI_EVT break; case SNHUBAPI_EVT_ADD_SID: - // LOG_INFO("+ADD:SID:[%02x]\r\n", msg[0]); + // LOG_INFO("+ADD:SID:[%02x]", msg[0]); break; case SNHUBAPI_EVT_ADD_PID: - // LOG_INFO("+ADD:PID:[%02x]\r\n", msg[0]); + // LOG_INFO("+ADD:PID:[%02x]", msg[0]); #ifdef BOOT_DATA_REQ provision = msg[0]; #endif @@ -55,12 +55,12 @@ static void onewire_evt(const uint8_t pid, const uint8_t sid, const SNHUBAPI_EVT case SNHUBAPI_EVT_SDATA_REQ: - // LOG_INFO("+EVT:PID[%02x],IPSO[%02x]\r\n",pid,msg[0]); + // LOG_INFO("+EVT:PID[%02x],IPSO[%02x]",pid,msg[0]); // for( uint16_t i=1; i 0) ? true : false; } -#endif // HAS_RAKPROT \ No newline at end of file +#endif // HAS_RAKPROT