pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-10-03 05:53:24 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity

More Spelling Errors

Browse Source
This commit is contained in:
Technologyman00 2024-11-02 00:24:06 -05:00
parent a65c880b80
commit ef4c6b475b
4 changed files with 7 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/GpioLogic.cpp
View File

@ -66,7 +66,7 @@ GpioBinaryTransformer::GpioBinaryTransformer(GpioVirtPin *inPin1, GpioVirtPin *i
assert(!inPin2->dependentPin); // We only allow one dependent pin
inPin2->dependentPin = this;
// Don't update at construction time, because various GpioPins might be global constructor based not yet initied because
// Don't update at construction time, because various GpioPins might be global constructor based not yet initiated because
// order of operations for global constructors is not defined.
// update();
}

2
src/Power.cpp
View File

@ -640,7 +640,7 @@ void Power::readPowerStatus()
batteryChargePercent = batteryLevel->getBatteryPercent();
} else {
// If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
// In that case, we compute an estimate of the charge percent based on open circuite voltage table defined
// In that case, we compute an estimate of the charge percent based on open circuit voltage table defined
// in power.h
batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) /
((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))),

6
src/PowerFSM.cpp
View File

@ -185,7 +185,7 @@ static void powerEnter()
{
// LOG_DEBUG("Enter state: POWER");
if (!isPowered()) {
// If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
// If we got here, we are in the wrong state - we should be in powered, let that state handle things
LOG_INFO("Loss of power in Powered");
powerFSM.trigger(EVENT_POWER_DISCONNECTED);
} else {
@ -230,7 +230,7 @@ static void onEnter()
static void onIdle()
{
if (isPowered()) {
// If we got here, we are in the wrong state - we should be in powered, let that state ahndle things
// If we got here, we are in the wrong state - we should be in powered, let that state handle things
powerFSM.trigger(EVENT_POWER_CONNECTED);
}
}
@ -371,7 +371,7 @@ void PowerFSM_setup()
// We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally)
#ifdef ARCH_ESP32
// See: https://github.com/meshtastic/firmware/issues/1071
// Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the
// Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiated through the
// modules
if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) {
powerFSM.add_timed_transition(&stateNB, &stateLS,

4
src/sleep.cpp
View File

@ -287,7 +287,7 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false)
// No need to turn this off if the power draw in sleep mode really is just 0.2uA and turning it off would
// leave floating input for the IRQ line
// If we want to leave the radio receiving in would be 11.5mA current draw, but most of the time it is just waiting
// in its sequencer (true?) so the average power draw should be much lower even if we were listinging for packets
// in its sequencer (true?) so the average power draw should be much lower even if we were listening for packets
// all the time.
PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
@ -359,7 +359,7 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
// never tries to go to sleep if the user is using the API
// gpio_wakeup_enable((gpio_num_t)SERIAL0_RX_GPIO, GPIO_INTR_LOW_LEVEL);
// doesn't help - I think the USB-UART chip losing power is pulling the signal llow
// doesn't help - I think the USB-UART chip losing power is pulling the signal low
// gpio_pullup_en((gpio_num_t)SERIAL0_RX_GPIO);
// alas - can only work if using the refclock, which is limited to about 9600 bps