Update variant file and qspi flash programming settings for new ttgoeink

Note: bin/qspi-flash-test.sh contains a script you can use for basic
bench programming and testing of the serial spi flash over SWD

bin/qspi-flash-test.sh

@@ -1,6 +1,6 @@
 # You probably don't need this - it is a basic test of the serial flash on the TTGO eink board
 
-nrfjprog -qspiini nrf52/ttgo_eink_qpsi.ini --qspieraseall
+nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --qspieraseall
 nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --memwr 0x12000000 --val 0xdeadbeef --verify
 nrfjprog --qspiini nrf52/ttgo_eink_qpsi.ini --readqspi spi.hex
 objdump -s spi.hex | less

nrf52/ttgo_eink_qpsi.ini

@@ -8,10 +8,10 @@
 MemSize = 0x200000
 
 ; Define the desired ReadMode. Valid options are FASTREAD, READ2O, READ2IO, READ4O and READ4IO
-ReadMode = READ2IO
+ReadMode = READ4IO
 
 ; Define the desired WriteMode. Valid options are PP, PP2O, PP4O and PP4IO
-WriteMode = PP
+WriteMode = PP4IO
 
 ; Define the desired AddressMode. Valid options are BIT24 and BIT32
 AddressMode = BIT24
@@ -38,12 +38,10 @@ DIO0Pin = 12
 DIO0Port = 1
 DIO1Pin = 13
 DIO1Port = 1
-
+DIO2Pin = 7
-;These two pins are not connected, but we must name something
+DIO2Port = 0
-DIO2Pin = 3
-DIO2Port = 1
 DIO3Pin = 5
-DIO3Port = 1
+DIO3Port = 0
 
 ; Define the Index of the Write In Progress (WIP) bit in the status register. Valid options are in the range of 0 to 7.
 WIPIndex = 0
@@ -57,13 +55,8 @@ PPSize = PAGE256
 ; Numbers can be given in decimal, hex (starting with either 0x or 0X) and binary (starting with either 0b or 0B) formats. 
 ; The custom instructions will be executed in the order found. 
 
-; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) enabling the Quad Operation and the High Performance
-; mode for the MX25R6435F memory present in the nRF52840 DK.
-;InitializationCustomInstruction =  0x06
-;InitializationCustomInstruction =  0x01, [0x40, 0, 0x2]
-
 ; For MX25R1635F on TTGO board, only two data lines are connected
-; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) disabling Quad Operation and the High Performance
+; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) enabling Quad Operation and the High Performance
 ; mode.  For normal operation you might want low power mode instead.
 InitializationCustomInstruction =  0x06
-InitializationCustomInstruction =  0x01, [0x00, 0, 0x2]
+InitializationCustomInstruction =  0x01, [0x40, 0, 0x2]

nrf52/ttgo_eink_qpsi0.1.ini

@@ -0,0 +1,69 @@
+; nrfjprog.exe configuration file.
+
+; Note: QSPI flash is mapped into memory at address 0x12000000
+
+[DEFAULT_CONFIGURATION]
+; Define the capacity of the flash memory device in bytes. Set to 0 if no external memory device is present in your board.
+; MX25R1635F is 16Mbit/2Mbyte
+MemSize = 0x200000
+
+; Define the desired ReadMode. Valid options are FASTREAD, READ2O, READ2IO, READ4O and READ4IO
+ReadMode = READ2IO
+
+; Define the desired WriteMode. Valid options are PP, PP2O, PP4O and PP4IO
+WriteMode = PP
+
+; Define the desired AddressMode. Valid options are BIT24 and BIT32
+AddressMode = BIT24
+
+; Define the desired Frequency. Valid options are M2, M4, M8, M16 and M32
+Frequency = M16
+
+; Define the desired SPI mode. Valid options are MODE0 and MODE3
+SpiMode = MODE0
+
+; Define the desired SckDelay. Valid options are in the range 0 to 255
+SckDelay = 0x80
+
+; Define the desired IO level for DIO2 and DIO3 during a custom instruction. Valid options are LEVEL_HIGH and LEVEL_LOW
+CustomInstructionIO2Level = LEVEL_LOW
+CustomInstructionIO3Level = LEVEL_HIGH
+
+; Define the assigned pins for the QSPI peripheral. Valid options are those existing in your device
+CSNPin = 15
+CSNPort = 1
+SCKPin = 14
+SCKPort = 1
+DIO0Pin = 12
+DIO0Port = 1
+DIO1Pin = 13
+DIO1Port = 1
+
+;These two pins are not connected, but we must name something
+DIO2Pin = 3
+DIO2Port = 1
+DIO3Pin = 5
+DIO3Port = 1
+
+; Define the Index of the Write In Progress (WIP) bit in the status register. Valid options are in the range of 0 to 7.
+WIPIndex = 0
+
+; Define page size for commands. Valid sizes are PAGE256 and PAGE512.
+PPSize = PAGE256
+
+; Custom instructions to send to the external memory after initialization. Format is instruction code plus data to send in between optional brakets. 
+; These instructions will be executed each time the qspi peripheral is initiated by nrfjprog. 
+; To improve execution speed on consecutive interations with QSPI, you can run nrfjprog once with custom initialization, and then comment out the lines below.
+; Numbers can be given in decimal, hex (starting with either 0x or 0X) and binary (starting with either 0b or 0B) formats. 
+; The custom instructions will be executed in the order found. 
+
+; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) enabling the Quad Operation and the High Performance
+; mode for the MX25R6435F memory present in the nRF52840 DK.
+;InitializationCustomInstruction =  0x06
+;InitializationCustomInstruction =  0x01, [0x40, 0, 0x2]
+
+; For MX25R1635F on TTGO board, only two data lines are connected
+; This example includes two commands, first a WREN (WRite ENable) and then a WRSR (WRite Satus Register) disabling Quad Operation and the High Performance
+; mode.  For normal operation you might want low power mode instead.
+InitializationCustomInstruction =  0x06
+InitializationCustomInstruction =  0x01, [0x00, 0, 0x2]

variants/eink/variant.h

@@ -149,7 +149,7 @@ No longer populated on PCB
     */
 #define WIRE_INTERFACES_COUNT 1
 
-#define PIN_WIRE_SDA (26) // Not connected on board?
+#define PIN_WIRE_SDA (26)
 #define PIN_WIRE_SCL (27)
 
 /* touch sensor, active high */
@@ -167,8 +167,8 @@ External serial flash WP25R1635FZUIL0
 #define PIN_QSPI_CS (32 + 15)
 #define PIN_QSPI_IO0 (32 + 12) // MOSI if using two bit interface
 #define PIN_QSPI_IO1 (32 + 13) // MISO if using two bit interface
-//#define PIN_QSPI_IO2 22 // WP if using two bit interface (i.e. not used)
+#define PIN_QSPI_IO2 (0 + 7) // WP if using two bit interface (i.e. not used)
-//#define PIN_QSPI_IO3 23 // HOLD if using two bit interface (i.e. not used)
+#define PIN_QSPI_IO3 (0 + 5) // HOLD if using two bit interface (i.e. not used)
 
 // On-board QSPI Flash
 #define EXTERNAL_FLASH_DEVICES MX25R1635F
@@ -223,7 +223,8 @@ External serial flash WP25R1635FZUIL0
  */
 
 #define PIN_GPS_WAKE (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
-#define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
+// Seems to be missing on this new board
+// #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
 #define PIN_GPS_TX (32 + 9)   // This is for bits going TOWARDS the CPU
 #define PIN_GPS_RX (32 + 8)   // This is for bits going TOWARDS the GPS