Merge 066188c62b into 580fa292ac

boards/t5-epaper-s3.json

@@ -0,0 +1,38 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "memory_type": "qio_opi",
+      "partitions": "default_16MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_RUNNING_CORE=0",
+      "-DARDUINO_EVENT_RUNNING_CORE=0",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "LilyGo T5-ePaper-S3",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://lilygo.cc/products/t5-e-paper-s3-pro",
+  "vendor": "LILYGO"
+}

src/graphics/Screen.cpp

@@ -637,7 +637,7 @@ void Screen::setup()
             touchScreenImpl1->init();
         }
     }
-#elif HAS_TOUCHSCREEN && !defined(USE_EINK)
+#elif HAS_TOUCHSCREEN && !defined(USE_EINK) && !defined(USE_EPD)
     touchScreenImpl1 =
         new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast<TFTDisplay *>(dispdev)->getTouch);
     touchScreenImpl1->init();

src/graphics/niche/InkHUD/Applet.h

@@ -15,6 +15,7 @@
 
 #include <GFX.h> // GFXRoot drawing lib
 
+#include "mesh/MeshModule.h"
 #include "mesh/MeshTypes.h"
 
 #include "./AppletFont.h"

src/main.cpp

@@ -394,6 +394,19 @@ void setup()
     io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
     io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
     io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+#elif defined(T5_S3_EPAPER_PRO)
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(BOARD_BL_EN, OUTPUT);
+#if !defined(T5_S3_EPAPER_PRO_V1)
+    io.begin(Wire, PCA9535_ADDR, SDA, SCL);
+    io.configPort(ExtensionIOXL9555::PORT0, 0x00);
+    io.configPort(ExtensionIOXL9555::PORT1, 0xFF);
+    io.digitalWrite(PCA9535_IO00_LORA_EN, HIGH);
+    delay(100);
+#endif
 #endif
     concurrency::hasBeenSetup = true;
 #if ARCH_PORTDUINO

src/platform/extra_variants/t5_s3_epaper_pro/variant.cpp

@@ -0,0 +1,33 @@
+#include "configuration.h"
+
+#ifdef T5_S3_EPAPER_PRO
+
+#include "input/TouchScreenImpl1.h"
+#include <Wire.h>
+#include <bb_captouch.h>
+
+BBCapTouch bbct;
+
+bool readTouch(int16_t *x, int16_t *y)
+{
+    TOUCHINFO ti;
+    if (!digitalRead(GT911_PIN_INT)) {
+        if (bbct.getSamples(&ti)) {
+            *x = ti.x[0];
+            *y = ti.y[0];
+            return true;
+        }
+    }
+    return false;
+}
+
+// T5-S3-ePaper Pro specific (late-) init
+void lateInitVariant()
+{
+    bbct.init(GT911_PIN_SDA, GT911_PIN_SCL, GT911_PIN_RST, GT911_PIN_INT);
+    bbct.setOrientation(90, EPD_WIDTH, EPD_HEIGHT);
+    // FIXME: crashes!
+    // touchScreenImpl1 = new TouchScreenImpl1(EPD_WIDTH, EPD_HEIGHT, readTouch);
+    // touchScreenImpl1->init();
+}
+#endif

variants/esp32s3/t5s3_epaper/nicheGraphics.h

@@ -0,0 +1,123 @@
+/*
+
+Most of the Meshtastic firmware uses preprocessor macros throughout the code to support different hardware variants.
+NicheGraphics attempts a different approach:
+
+Per-device config takes place in this setupNicheGraphics() method
+(And a small amount in platformio.ini)
+
+This file sets up InkHUD for Heltec VM-E290.
+Different NicheGraphics UIs and different hardware variants will each have their own setup procedure.
+
+*/
+
+#pragma once
+
+#include "configuration.h"
+#include "mesh/MeshModule.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+// #include "graphics/niche/InkHUD/InkHUD.h"
+#include "graphics/niche/InkHUD/WindowManager.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/Backlight/LatchingBacklight.h"
+#include "graphics/niche/Drivers/EInk/DEPG0290BNS800.h"
+#include "graphics/niche/Inputs/TwoButton.h"
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+
+    // Display is connected to HSPI
+    SPIClass *hspi = new SPIClass(HSPI);
+    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
+
+    // E-Ink Driver
+    // -----------------------------
+
+    // Use E-Ink driver
+    Drivers::EInk *driver = new Drivers::DEPG0290BNS800;
+    driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update
+    // Set how unhealthy additional FAST updates beyond this number are
+    inkhud->setDisplayResilience(7, 1.5);
+
+    // Prepare fonts
+    InkHUD::Applet::fontLarge = FREESANS_9PT_WIN1252;
+    InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
+
+    // Init settings, and customize defaults
+    inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
+    inkhud->persistence->settings.rotation = 1;           // 90 degrees clockwise
+    inkhud->persistence->settings.userTiles.count = 1;    // One tile only by default, keep things simple for new users
+    inkhud->persistence->settings.optionalMenuItems.nextTile = false;  // Behavior handled by aux button instead
+    inkhud->persistence->settings.optionalFeatures.batteryIcon = true; // Device definitely has a battery
+
+    // Setup backlight
+    // Note: AUX button behavior configured further down
+    Drivers::LatchingBacklight *backlight = Drivers::LatchingBacklight::getInstance();
+    backlight->setPin(PIN_EINK_EN);
+
+    // Pick applets
+    // Note: order of applets determines priority of "auto-show" feature
+    // Optional arguments for defaults:
+    // - is activated?
+    // - is autoshown?
+    // - is foreground on a specific tile (index)?
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
+    inkhud->addApplet("DMs", new InkHUD::DMApplet);
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true); // Activated
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0); // Activated, not autoshown, default on tile 0
+    // inkhud->addApplet("Basic", new InkHUD::BasicExampleApplet);
+    // inkhud->addApplet("NewMsg", new InkHUD::NewMsgExampleApplet);
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // A shared NicheGraphics component
+
+    // Setup the main user button (0)
+    buttons->setWiring(0, BUTTON_PIN);
+    buttons->setHandlerShortPress(0, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
+    buttons->setHandlerLongPress(0, []() { InkHUD::InkHUD::getInstance()->longpress(); });
+
+    // Setup the aux button (1)
+    // Bonus feature of VME290
+    buttons->setWiring(1, BUTTON_PIN_SECONDARY);
+    buttons->setHandlerShortPress(1, []() { InkHUD::InkHUD::getInstance()->nextTile(); });
+
+    buttons->start();
+}
+
+#endif

variants/esp32s3/t5s3_epaper/pins_arduino.h

@@ -0,0 +1,43 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+#if defined(T5_S3_EPAPER_PRO_V1)
+// The default Wire will be mapped to RTC, Touch, BQ25896, and BQ27220
+static const uint8_t SDA = 6;
+static const uint8_t SCL = 5;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 46;
+static const uint8_t MOSI = 17;
+static const uint8_t MISO = 8;
+static const uint8_t SCK = 18;
+
+#define SPI_MOSI (17)
+#define SPI_SCK (18)
+#define SPI_MISO (8)
+#define SPI_CS (16)
+
+#else // T5_S3_EPAPER_PRO_V2
+// The default Wire will be mapped to RTC, Touch, PCA9535, BQ25896, and BQ27220
+static const uint8_t SDA = 39;
+static const uint8_t SCL = 40;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 46;
+static const uint8_t MOSI = 13;
+static const uint8_t MISO = 21;
+static const uint8_t SCK = 14;
+
+#define SPI_MOSI (13)
+#define SPI_SCK (14)
+#define SPI_MISO (21)
+#define SPI_CS (12)
+
+#endif
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/t5s3_epaper/platformio.ini

@@ -0,0 +1,51 @@
+[t5s3_epaper_base]
+extends = esp32s3_base
+board = t5-epaper-s3
+board_build.partition = default_16MB.csv
+board_check = false
+upload_protocol = esptool
+build_flags = 
+  ${esp32_base.build_flags} 
+  -I variants/esp32s3/t5s3_epaper
+  -D T5_S3_EPAPER_PRO
+  -D PRIVATE_HW
+  -D GPS_POWER_TOGGLE
+build_src_filter = 
+  ${esp32s3_base.build_src_filter} 
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  https://github.com/Xinyuan-LilyGO/LilyGo-EPD47
+  ;https://github.com/vroland/epdiy/archive/c61e9e923ce2418150d54f88cea5d196cdc40c54.zip
+  https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
+  https://github.com/bitbank2/bb_captouch/archive/refs/tags/1.3.1.zip
+  lewisxhe/XPowersLib@0.3.1
+  lewisxhe/SensorLib@0.3.1
+
+
+[env:t5s3_epaper_inkhud]
+extends = t5s3_epaper_base, inkhud
+build_flags =
+  ${t5s3_epaper_base.build_flags}
+  ${inkhud.build_flags}
+build_src_filter =
+  ${t5s3_epaper_base.build_src_filter}
+  ${inkhud.build_src_filter}
+  -D SDCARD_USE_SPI1
+lib_deps =
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${t5s3_epaper_base.lib_deps}
+
+
+[env:t5s3-epaper-v1] ; H752
+extends = t5s3_epaper_base
+build_flags =
+  ${t5s3_epaper_base.build_flags}
+  -D T5_S3_EPAPER_PRO_V1
+  -D GPS_DEFAULT_NOT_PRESENT=1
+
+[env:t5s3-epaper-v2] ; H752-01
+extends = t5s3_epaper_base
+build_flags =
+  ${t5s3_epaper_base.build_flags}
+  -D T5_S3_EPAPER_PRO_V2
+  -D SDCARD_USE_SPI1

variants/esp32s3/t5s3_epaper/variant.h

@@ -0,0 +1,104 @@
+
+// Display (E-Ink) ED047TC1 - 8bit parallel
+#define USE_EPD
+#define EPD_WIDTH 960
+#define EPD_HEIGHT 540
+
+#if defined(T5_S3_EPAPER_PRO_V1)
+#define BOARD_BL_EN 40
+#else
+#define BOARD_BL_EN 11
+#endif
+
+#define I2C_SDA SDA
+#define I2C_SCL SCL
+
+#define HAS_TOUCHSCREEN 1
+#define GT911_PIN_SDA SDA
+#define GT911_PIN_SCL SCL
+#if defined(T5_S3_EPAPER_PRO_V1)
+#define GT911_PIN_INT 15
+#define GT911_PIN_RST 41
+#else
+#define GT911_PIN_INT 3
+#define GT911_PIN_RST 9
+#endif
+
+#define PCF85063_RTC 0x51
+#define HAS_RTC 1
+#define PCF85063_INT 2
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+// GPS
+#if !defined(T5_S3_EPAPER_PRO_V1)
+#define GPS_RX_PIN 44
+#define GPS_TX_PIN 43
+#endif
+
+#define BUTTON_PIN 0
+#define PIN_BUTTON2 48
+#define ALT_BUTTON_PIN PIN_BUTTON2
+
+// SD card
+#define HAS_SDCARD
+#define SDCARD_CS SPI_CS
+#define SD_SPI_FREQUENCY 75000000U
+
+// battery charger BQ25896
+#define HAS_PPM 1
+#define XPOWERS_CHIP_BQ25896
+
+// battery quality management BQ27220
+#define HAS_BQ27220 1
+#define BQ27220_I2C_SDA SDA
+#define BQ27220_I2C_SCL SCL
+#define BQ27220_DESIGN_CAPACITY 1500
+
+#if !defined(T5_S3_EPAPER_PRO_V1)
+// TPS651851
+
+// PCA9535 IO extender
+#define USE_XL9555
+#define PCA9535_ADDR 0x20
+#define PCA9535_INT 38
+#define PCA9535_IO00_LORA_EN 00
+#define PCA9535_IO10_EP_OE 10   // EP Output enable source driver
+#define PCA9535_IO11_EP_MODE 11 // EP Output mode selection gate driver
+#define PCA9535_IO12_BUTTON 12
+#define PCA9535_IO13_TPS_PWRUP 13
+#define PCA9535_IO14_VCOM_CTRL 14
+#define PCA9535_IO15_TPS_WAKEUP 15
+#define PCA9535_IO16_TPS_PWR_GOOD 16
+#define PCA9535_IO17_TPS_INT 17
+#endif
+
+// LoRa
+#define USE_SX1262
+#define USE_SX1268
+
+#define LORA_SCK SCK
+#define LORA_MISO MISO
+#define LORA_MOSI MOSI
+#define LORA_CS 46
+
+#define LORA_DIO0 -1
+#if defined(T5_S3_EPAPER_PRO_V1)
+#define LORA_RESET 43
+#define LORA_DIO1 3  // SX1262 IRQ
+#define LORA_DIO2 44 // SX1262 BUSY
+#define LORA_DIO3
+#else
+#define LORA_RESET 1
+#define LORA_DIO1 10 // SX1262 IRQ
+#define LORA_DIO2 47 // SX1262 BUSY
+#define LORA_DIO3
+#endif
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 2.4