Support for M5Stack Core2 ESP32

platformio.ini

@@ -39,6 +39,7 @@ default_envs = tbeam
 ;default_envs = heltec_vision_master_e213
 ;default_envs = heltec_vision_master_e290
 ;default_envs = heltec_mesh_node_t114
+;default_envs = m5stack-core2
 
 extra_configs =
   arch/*/*.ini

src/ButtonThread.cpp

@@ -13,6 +13,9 @@
 #ifdef ARCH_PORTDUINO
 #include "platform/portduino/PortduinoGlue.h"
 #endif
+#if defined(M5STACK_CORE2)
+#include <M5Unified.h>
+#endif
 
 #define DEBUG_BUTTONS 0
 #if DEBUG_BUTTONS
@@ -332,4 +335,87 @@ void ButtonThread::userButtonPressedLongStop()
     if (millis() > c_holdOffTime) {
         btnEvent = BUTTON_EVENT_LONG_RELEASED;
     }
-}
+}
+
+#if defined(M5STACK_CORE2)
+// Define a constant
+const unsigned long LONG_PRESS_THRESHOLD = 5000; // Hold the threshold
+const unsigned long DOUBLE_CLICK_THRESHOLD = 1000; // Double-click the threshold
+const int MAX_CLICKS = 2; // Maximum hits
+// Global variable
+unsigned long lastClickTime = 0; // The time of the last click
+int clickCount = 0; // Click count
+unsigned long touch_start_time; // Touch start time
+bool is_touching = false; // Mark whether you are currently touching
+void ScreenTouch(){
+    M5.update();
+    auto count = M5.Touch.getCount();
+    if (count == 0) return;
+    for (std::size_t i = 0; i < count; ++i) {
+        auto t = M5.Touch.getDetail(i);
+
+        // If touch starts
+        if (t.wasPressed()) {
+            touch_start_time = millis(); // Record the time when the touch began
+            is_touching = true; // Set to touch
+        }
+
+        //Check the current touch status
+        if (is_touching) {
+            unsigned long duration = millis() - touch_start_time;
+            if (duration >= LONG_PRESS_THRESHOLD) { 
+                 LOG_INFO("Long Press Detected\n");
+                powerFSM.trigger(EVENT_PRESS);
+                screen->startAlert("Shutting down...");
+                screen->forceDisplay(true);
+                // Executive logic, such as shutdown, display menu, etc
+                // To avoid duplicate detection, set is_touching to false here
+                is_touching = false; 
+                M5.Speaker.tone(3000, 300);
+                delay(1000);
+                M5.Power.powerOff();
+            }
+        }
+        // Check if the touch just ended
+        if (t.wasReleased()) {
+            if (is_touching) {
+                unsigned long duration = millis() - touch_start_time;
+                if (duration < LONG_PRESS_THRESHOLD) { 
+                    unsigned long currentTime = millis();     
+                    // Check whether it is a double click
+                    if (currentTime - lastClickTime <= DOUBLE_CLICK_THRESHOLD) {
+                        clickCount++;
+                        if (clickCount == MAX_CLICKS) {
+                             LOG_INFO("Double Click Detected\n");
+                            M5.Speaker.tone(2000, 100);
+                            service->refreshLocalMeshNode();
+                            auto sentPosition = service->trySendPosition(NODENUM_BROADCAST, true);
+                            if (screen) {
+                                if (sentPosition)
+                                    screen->print("Sent ad-hoc position\n");
+                                else
+                                    screen->print("Sent ad-hoc nodeinfo\n");
+                                screen->forceDisplay(true); // Force a new UI frame, then force an EInk update
+                            }
+                            clickCount = 0; 
+                        }
+                    } else {
+                        clickCount = 1; 
+                    }
+
+                    lastClickTime = currentTime; // Update last click time
+                }
+            }
+            // Reset the touch status
+            is_touching = false; 
+        }
+        // You can add more status checks, such as sliding and dragging
+        if (t.wasFlickStart()) {
+            LOG_INFO("Flick Start Detected\n");
+            M5.Speaker.tone(1000, 100);
+            powerFSM.trigger(EVENT_PRESS);
+
+        }
+    }
+}
+#endif

src/ButtonThread.h

@@ -66,3 +66,7 @@ class ButtonThread : public concurrency::OSThread
 };
 
 extern ButtonThread *buttonThread;
+
+#if defined(M5STACK_CORE2)
+void ScreenTouch();
+#endif

src/graphics/Screen.cpp

@@ -66,6 +66,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "platform/portduino/PortduinoGlue.h"
 #endif
 
+#if defined(M5STACK_CORE2)
+#include "M5Unified.h"
+#define OLED_BLACK OLEDDISPLAY_COLOR::BLACK
+#define OLED_WHITE OLEDDISPLAY_COLOR::WHITE
+#else
+    #define OLED_BLACK BLACK
+    #define OLED_WHITE WHITE
+#endif
+
 using namespace meshtastic; /** @todo remove */
 
 namespace graphics
@@ -1621,6 +1630,14 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
             pinMode(VTFT_LEDA, OUTPUT);
             digitalWrite(VTFT_LEDA, TFT_BACKLIGHT_ON);
 #endif
+#endif
+#ifdef TFT_BL
+            pinMode(TFT_BL, OUTPUT);
+            digitalWrite(TFT_BL, HIGH);
+#endif
+#if defined(M5STACK_CORE2) 
+            M5.Power.Axp192.setDCDC3(1000);
+            M5.Display.setBrightness(130);
 #endif
             enabled = true;
             setInterval(0); // Draw ASAP
@@ -1633,6 +1650,13 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
             LOG_INFO("Turning off screen\n");
             dispdev->displayOff();
+#ifdef TFT_BL
+            pinMode(TFT_BL, OUTPUT);
+            digitalWrite(TFT_BL, LOW);
+#endif
+#if defined(M5STACK_CORE2) 
+            M5.Power.Axp192.setDCDC3(0);
+#endif
 #ifdef USE_ST7789
             SPI1.end();
 #if defined(ARCH_ESP32)

src/graphics/TFTDisplay.cpp

@@ -327,7 +327,9 @@ class LGFX : public lgfx::LGFX_Device
         {
             auto cfg = _light_instance.config(); // Gets a structure for backlight settings.
 
+#if !defined(M5STACK_CORE2)
             cfg.pin_bl = TFT_BL; // Pin number to which the backlight is connected
+#endif
             cfg.invert = false;  // true to invert the brightness of the backlight
             // cfg.freq = 44100;    // PWM frequency of backlight
             // cfg.pwm_channel = 1; // PWM channel number to use
@@ -718,7 +720,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         display(true);
         if (settingsMap[displayBacklight] > 0)
             digitalWrite(settingsMap[displayBacklight], TFT_BACKLIGHT_ON);
-#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE)
+#elif !defined(RAK14014) && !defined(M5STACK) && !defined(UNPHONE) && !defined(M5STACK_CORE2)
         tft->wakeup();
         tft->powerSaveOff();
 #endif
@@ -730,7 +732,7 @@ void TFTDisplay::sendCommand(uint8_t com)
         unphone.backlight(true); // using unPhone library
 #endif
 #ifdef RAK14014
-#elif !defined(M5STACK) && !defined(ST7789_CS) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
+#elif !defined(M5STACK) && !defined(ST7789_CS) && !defined(M5STACK_CORE2) // T-Deck gets brightness set in Screen.cpp in the handleSetOn function
         tft->setBrightness(172);
 #endif
         break;
@@ -837,9 +839,11 @@ bool TFTDisplay::connect()
     unphone.backlight(true); // using unPhone library
 #endif
 
+#if !defined(M5STACK_CORE2)
     tft->init();
+#endif
 
-#if defined(M5STACK)
+#if defined(M5STACK) || defined(M5STACK_CORE2)
     tft->setRotation(0);
 #elif defined(RAK14014)
     tft->setRotation(1);

src/main.cpp

@@ -118,6 +118,10 @@ AudioThread *audioThread = nullptr;
 float tcxoVoltage = SX126X_DIO3_TCXO_VOLTAGE; // if TCXO is optional, put this here so it can be changed further down.
 #endif
 
+#if defined(M5STACK_CORE2)
+#include <M5Unified.h>
+#endif
+
 using namespace concurrency;
 
 volatile static const char slipstreamTZString[] = USERPREFS_TZ_STRING;
@@ -795,6 +799,10 @@ void setup()
         RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_NO_AXP192); // Record a hardware fault for missing hardware
 #endif
 
+#if defined(M5STACK_CORE2)
+    M5.begin();
+#endif
+
 #if !MESHTASTIC_EXCLUDE_I2C
 // Don't call screen setup until after nodedb is setup (because we need
 // the current region name)

src/platform/esp32/architecture.h

@@ -104,6 +104,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_NANO_G1
 #elif defined(M5STACK)
 #define HW_VENDOR meshtastic_HardwareModel_M5STACK
+#elif defined(M5STACK_CORE2)
+#define HW_VENDOR meshtastic_HardwareModel_M5STACK_CORE2
 #elif defined(STATION_G1)
 #define HW_VENDOR meshtastic_HardwareModel_STATION_G1
 #elif defined(DR_DEV)

variants/m5stack_core2/pins_arduino.h

@@ -0,0 +1,47 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+static const uint8_t TX = 1;
+static const uint8_t RX = 3;
+
+static const uint8_t TXD2 = 17;
+static const uint8_t RXD2 = 16;
+
+static const uint8_t SDA = 21;
+static const uint8_t SCL = 22;
+
+static const uint8_t SS = 33;
+static const uint8_t MOSI = 23;
+static const uint8_t MISO = 38;
+static const uint8_t SCK = 18;
+
+static const uint8_t G23 = 23;
+static const uint8_t G19 = 19;
+static const uint8_t G18 = 18;
+static const uint8_t G3 = 3;
+static const uint8_t G16 = 16;
+static const uint8_t G21 = 21;
+static const uint8_t G2 = 2;
+static const uint8_t G12 = 12;
+static const uint8_t G15 = 15;
+static const uint8_t G35 = 35;
+static const uint8_t G36 = 36;
+static const uint8_t G25 = 25;
+static const uint8_t G26 = 26;
+static const uint8_t G1 = 1;
+static const uint8_t G17 = 17;
+static const uint8_t G22 = 22;
+static const uint8_t G5 = 5;
+static const uint8_t G13 = 13;
+static const uint8_t G0 = 0;
+static const uint8_t G34 = 34;
+
+static const uint8_t DAC1 = 25;
+static const uint8_t DAC2 = 26;
+
+static const uint8_t ADC1 = 35;
+static const uint8_t ADC2 = 36;
+
+#endif /* Pins_Arduino_h */

variants/m5stack_core2/platformio.ini

@@ -0,0 +1,26 @@
+[env:m5stack-core2]
+extends = esp32_base
+board = m5stack-core-esp32
+monitor_filters = esp32_exception_decoder
+build_src_filter = 
+  ${esp32_base.build_src_filter}
+build_flags = 
+  ${esp32_base.build_flags} -I variants/m5stack_core2
+  -DILI9341_DRIVER
+  -DM5STACK_CORE2
+  -DUSER_SETUP_LOADED
+  -DTFT_SDA_READ
+  -DTFT_DRIVER=0x9341
+  -DTFT_MISO=38
+  -DTFT_MOSI=23
+  -DTFT_SCLK=18
+  -DTFT_CS=5
+  -DTFT_DC=15
+  -DTFT_RST=-1
+  -DSPI_FREQUENCY=40000000
+  -DSPI_READ_FREQUENCY=16000000
+  -DDISABLE_ALL_LIBRARY_WARNINGS
+lib_deps = 
+  ${esp32_base.lib_deps}
+  lovyan03/LovyanGFX@^1.1.8
+  m5stack/M5Unified@^0.1.14

variants/m5stack_core2/variant.h

@@ -0,0 +1,44 @@
+// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+
+
+// #define BUTTON_PIN 39 // 38, 37
+// #define BUTTON_PIN 0
+#define BUTTON_NEED_PULLUP
+// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Plugin.
+
+//#define BUTTON_PIN 
+
+//#define PIN_BUZZER 25
+#undef LORA_SCK
+#undef LORA_MISO
+#undef LORA_MOSI
+#undef LORA_CS
+
+#define LORA_SCK 18
+#define LORA_MISO 38
+#define LORA_MOSI 23
+#define LORA_CS 33    //NSS
+
+#define USE_RF95
+#define LORA_DIO0 35  // IRQ 
+#define LORA_RESET 19
+#define LORA_DIO1 RADIOLIB_NC // Not really used
+#define LORA_DIO2 RADIOLIB_NC // Not really used
+
+// This board has different GPS pins than all other boards
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+#define GPS_RX_PIN 13
+#define GPS_TX_PIN 14
+
+#define TFT_HEIGHT 240
+#define TFT_WIDTH 320
+#define TFT_OFFSET_X 0
+#define TFT_OFFSET_Y 0
+#define TFT_BUSY -1
+#define TFT_OFFSET_ROTATION 0
+// LCD screens are slow, so slowdown the wipe so it looks better
+#define SCREEN_TRANSITION_FRAMERATE 30 // fps
+// Picomputer gets a white on black display
+#define TFT_MESH COLOR565 (0xA0, 0xFF, 0x00)//(0x94, 0xEA, 0x67)  
+#define ILI9341_SPI_HOST VSPI_HOST // VSPI_HOST or HSPI_HOST