diff --git a/src/detect/ScanI2CTwoWire.cpp b/src/detect/ScanI2CTwoWire.cpp
index 89a0610b4..d6daf7b7a 100644
--- a/src/detect/ScanI2CTwoWire.cpp
+++ b/src/detect/ScanI2CTwoWire.cpp
@@ -378,7 +378,8 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
             case SHT31_4x_ADDR:     // same as OPT3001_ADDR_ALT
             case SHT31_4x_ADDR_ALT: // same as OPT3001_ADDR
                 registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2);
-                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0x11f3 || registerValue == 0xe9c || registerValue == 0xc8d) {
+                if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0x11f3 || registerValue == 0xe9c ||
+                    registerValue == 0xc8d) {
                     type = SHT4X;
                     logFoundDevice("SHT4X", (uint8_t)addr.address);
                 } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) {
diff --git a/src/nimble/NimbleBluetooth.cpp b/src/nimble/NimbleBluetooth.cpp
index 0b3009d39..60165b2c0 100644
--- a/src/nimble/NimbleBluetooth.cpp
+++ b/src/nimble/NimbleBluetooth.cpp
@@ -17,6 +17,21 @@
 #include "PowerStatus.h"
 #endif
 
+#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
+#if defined(CONFIG_NIMBLE_CPP_IDF)
+#include "host/ble_gap.h"
+#else
+#include "nimble/nimble/host/include/host/ble_gap.h"
+#endif
+
+namespace
+{
+constexpr uint16_t kPreferredBleMtu = 517;
+constexpr uint16_t kPreferredBleTxOctets = 251;
+constexpr uint16_t kPreferredBleTxTimeUs = (kPreferredBleTxOctets + 14) * 8;
+} // namespace
+#endif
+
 NimBLECharacteristic *fromNumCharacteristic;
 NimBLECharacteristic *BatteryCharacteristic;
 NimBLECharacteristic *logRadioCharacteristic;
@@ -212,6 +227,27 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
     virtual void onConnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo)
     {
         LOG_INFO("BLE incoming connection %s", connInfo.getAddress().toString().c_str());
+
+#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
+        const uint16_t connHandle = connInfo.getConnHandle();
+        int phyResult =
+            ble_gap_set_prefered_le_phy(connHandle, BLE_GAP_LE_PHY_2M_MASK, BLE_GAP_LE_PHY_2M_MASK, BLE_GAP_LE_PHY_CODED_ANY);
+        if (phyResult == 0) {
+            LOG_INFO("BLE conn %u requested 2M PHY", connHandle);
+        } else {
+            LOG_WARN("Failed to prefer 2M PHY for conn %u, rc=%d", connHandle, phyResult);
+        }
+
+        int dataLenResult = ble_gap_set_data_len(connHandle, kPreferredBleTxOctets, kPreferredBleTxTimeUs);
+        if (dataLenResult == 0) {
+            LOG_INFO("BLE conn %u requested data length %u bytes", connHandle, kPreferredBleTxOctets);
+        } else {
+            LOG_WARN("Failed to raise data length for conn %u, rc=%d", connHandle, dataLenResult);
+        }
+
+        LOG_INFO("BLE conn %u initial MTU %u (target %u)", connHandle, connInfo.getMTU(), kPreferredBleMtu);
+        pServer->updateConnParams(connHandle, 6, 12, 0, 200);
+#endif
     }
 
     virtual void onDisconnect(NimBLEServer *pServer, NimBLEConnInfo &connInfo, int reason)
@@ -316,6 +352,30 @@ void NimbleBluetooth::setup()
     NimBLEDevice::init(getDeviceName());
     NimBLEDevice::setPower(ESP_PWR_LVL_P9);
 
+#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C6)
+    int mtuResult = NimBLEDevice::setMTU(kPreferredBleMtu);
+    if (mtuResult == 0) {
+        LOG_INFO("BLE MTU request set to %u", kPreferredBleMtu);
+    } else {
+        LOG_WARN("Unable to request MTU %u, rc=%d", kPreferredBleMtu, mtuResult);
+    }
+
+    int phyResult = ble_gap_set_prefered_default_le_phy(BLE_GAP_LE_PHY_2M_MASK, BLE_GAP_LE_PHY_2M_MASK);
+    if (phyResult == 0) {
+        LOG_INFO("BLE default PHY preference set to 2M");
+    } else {
+        LOG_WARN("Failed to prefer 2M PHY by default, rc=%d", phyResult);
+    }
+
+    int dataLenResult = ble_gap_write_sugg_def_data_len(kPreferredBleTxOctets, kPreferredBleTxTimeUs);
+    if (dataLenResult == 0) {
+        LOG_INFO("BLE suggested data length set to %u bytes", kPreferredBleTxOctets);
+    } else {
+        LOG_WARN("Failed to raise suggested data length (%u/%u), rc=%d", kPreferredBleTxOctets, kPreferredBleTxTimeUs,
+                 dataLenResult);
+    }
+#endif
+
     if (config.bluetooth.mode != meshtastic_Config_BluetoothConfig_PairingMode_NO_PIN) {
         NimBLEDevice::setSecurityAuth(BLE_SM_PAIR_AUTHREQ_BOND | BLE_SM_PAIR_AUTHREQ_MITM | BLE_SM_PAIR_AUTHREQ_SC);
         NimBLEDevice::setSecurityInitKey(BLE_SM_PAIR_KEY_DIST_ENC | BLE_SM_PAIR_KEY_DIST_ID);
@@ -459,4 +519,4 @@ void clearNVS()
     ESP.restart();
 #endif
 }
-#endif
\ No newline at end of file
+#endif