diff --git a/src/graphics/Screen.cpp b/src/graphics/Screen.cpp
index 31647c92d..198dcc235 100644
--- a/src/graphics/Screen.cpp
+++ b/src/graphics/Screen.cpp
@@ -1506,7 +1506,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O
 #elif defined(USE_ST7567)
     dispdev = new ST7567Wire(address.address, -1, -1, geometry,
                              (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE);
-#elif ARCH_PORTDUINO
+#elif ARCH_PORTDUINO && !HAS_TFT
     if (settingsMap[displayPanel] != no_screen) {
         LOG_DEBUG("Make TFTDisplay!");
         dispdev = new TFTDisplay(address.address, -1, -1, geometry,
@@ -2756,4 +2756,4 @@ int Screen::handleAdminMessage(const meshtastic_AdminMessage *arg)
 } // namespace graphics
 #else
 graphics::Screen::Screen(ScanI2C::DeviceAddress, meshtastic_Config_DisplayConfig_OledType, OLEDDISPLAY_GEOMETRY) {}
-#endif // HAS_SCREEN
\ No newline at end of file
+#endif // HAS_SCREEN
diff --git a/src/modules/CannedMessageModule.cpp b/src/modules/CannedMessageModule.cpp
index a96fcc080..c20b7b56e 100644
--- a/src/modules/CannedMessageModule.cpp
+++ b/src/modules/CannedMessageModule.cpp
@@ -982,6 +982,7 @@ bool CannedMessageModule::interceptingKeyboardInput()
     }
 }
 
+#if !HAS_TFT
 void CannedMessageModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
 {
     char buffer[50];
@@ -1140,6 +1141,7 @@ void CannedMessageModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *st
         }
     }
 }
+#endif //! HAS_TFT
 
 ProcessMessage CannedMessageModule::handleReceived(const meshtastic_MeshPacket &mp)
 {
diff --git a/src/sleep.cpp b/src/sleep.cpp
index 5f1909a77..161b6e107 100644
--- a/src/sleep.cpp
+++ b/src/sleep.cpp
@@ -58,7 +58,7 @@ RTC_DATA_ATTR int bootCount = 0;
  */
 void setCPUFast(bool on)
 {
-#if defined(ARCH_ESP32) && HAS_WIFI
+#if defined(ARCH_ESP32) && HAS_WIFI && !HAS_TFT
 
     if (isWifiAvailable()) {
         /*
@@ -391,6 +391,9 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     gpio_wakeup_enable(pin, GPIO_INTR_LOW_LEVEL);
     esp_sleep_enable_gpio_wakeup();
 #endif
+#ifdef INPUTDRIVER_ENCODER_BTN
+    gpio_wakeup_enable((gpio_num_t)INPUTDRIVER_ENCODER_BTN, GPIO_INTR_LOW_LEVEL);
+#endif
 #ifdef T_WATCH_S3
     gpio_wakeup_enable((gpio_num_t)SCREEN_TOUCH_INT, GPIO_INTR_LOW_LEVEL);
 #endif
diff --git a/variants/seeed-sensecap-indicator/platformio.ini b/variants/seeed-sensecap-indicator/platformio.ini
index 86d6d0412..1b64ed6e1 100644
--- a/variants/seeed-sensecap-indicator/platformio.ini
+++ b/variants/seeed-sensecap-indicator/platformio.ini
@@ -24,5 +24,5 @@ build_flags = ${esp32_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
   https://github.com/mverch67/LovyanGFX#develop
-  earlephilhower/ESP8266Audio@^1.9.7
-  earlephilhower/ESP8266SAM@^1.0.1
\ No newline at end of file
+  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266SAM@^1.0.1
diff --git a/variants/seeed-sensecap-indicator/variant.h b/variants/seeed-sensecap-indicator/variant.h
index 289fea55b..29d547be3 100644
--- a/variants/seeed-sensecap-indicator/variant.h
+++ b/variants/seeed-sensecap-indicator/variant.h
@@ -25,8 +25,7 @@
 #define ST7701_BL 45
 #define ST7701_SPI_HOST SPI2_HOST
 #define ST7701_BACKLIGHT_EN 45
-#define SPI_FREQUENCY 20000000
-#define SPI_READ_FREQUENCY 16000000
+#define SPI_FREQUENCY 12000000
 #define TFT_HEIGHT 480
 #define TFT_WIDTH 480
 #define TFT_OFFSET_X 0
diff --git a/variants/t-deck/platformio.ini b/variants/t-deck/platformio.ini
index 16769e2f2..d2f09f50b 100644
--- a/variants/t-deck/platformio.ini
+++ b/variants/t-deck/platformio.ini
@@ -6,7 +6,7 @@ board_check = true
 upload_protocol = esptool
 #upload_port = COM29
 
-build_flags = ${esp32_base.build_flags} 
+build_flags = ${esp32s3_base.build_flags} 
   -DT_DECK 
   -DBOARD_HAS_PSRAM
   -DMAX_THREADS=40
@@ -16,4 +16,4 @@ build_flags = ${esp32_base.build_flags}
 lib_deps = ${esp32s3_base.lib_deps}
 	lovyan03/LovyanGFX@^1.1.9
   earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
\ No newline at end of file
+  earlephilhower/ESP8266SAM@^1.0.1
diff --git a/variants/t-deck/variant.h b/variants/t-deck/variant.h
index 91c12ab3d..4aeeb7ca8 100644
--- a/variants/t-deck/variant.h
+++ b/variants/t-deck/variant.h
@@ -27,8 +27,10 @@
 
 #define SLEEP_TIME 120
 
+#ifndef HAS_TFT
 #define BUTTON_PIN 0
 // #define BUTTON_NEED_PULLUP
+#endif
 #define GPS_DEFAULT_NOT_PRESENT 1
 #define GPS_RX_PIN 44
 #define GPS_TX_PIN 43
@@ -60,7 +62,7 @@
 #define TB_DOWN 15
 #define TB_LEFT 1
 #define TB_RIGHT 2
-#define TB_PRESS BUTTON_PIN
+#define TB_PRESS 0 // BUTTON_PIN
 
 // microphone
 #define ES7210_SCK 47
@@ -98,4 +100,4 @@
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 // Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
-// code)
\ No newline at end of file
+// code)