diff --git a/variants/meshlink/variant.cpp b/variants/meshlink/variant.cpp
index 12f0fc991..801337c0d 100644
--- a/variants/meshlink/variant.cpp
+++ b/variants/meshlink/variant.cpp
@@ -33,24 +33,23 @@ const uint32_t g_ADigitalPinMap[] = {
 void initVariant()
 {
     // LED1 & LED2
-    //pinMode(PIN_LED1, OUTPUT);
-    //ledOff(PIN_LED1);
+    // pinMode(PIN_LED1, OUTPUT);
+    // ledOff(PIN_LED1);
 
-    //pinMode(PIN_LED2, OUTPUT);
-    //ledOff(PIN_LED2);
-    //pinMode(PIN_LED1, OUTPUT);
-    //digitalWrite(PIN_LED1, LOW);
-    pinMode(24,OUTPUT);
+    // pinMode(PIN_LED2, OUTPUT);
+    // ledOff(PIN_LED2);
+    // pinMode(PIN_LED1, OUTPUT);
+    // digitalWrite(PIN_LED1, LOW);
+    pinMode(24, OUTPUT);
     digitalWrite(24, HIGH);
-    //pinMode(25,OUTPUT);
-    //digitalWrite(25, HIGH);
+    // pinMode(25,OUTPUT);
+    // digitalWrite(25, HIGH);
 
     // 3V3 Power Rail
     pinMode(PIN_3V3_EN, OUTPUT);
     digitalWrite(PIN_3V3_EN, HIGH);
-    //pinMode(PIN_GPS_EN, OUTPUT);
-    //digitalWrite(PIN_GPS_EN, HIGH);
-    //pinMode(GPS_TX_PIN, OUTPUT);
-    //pinMode(GPS_RX_PIN, INPUT_PULLUP);
-    
+    // pinMode(PIN_GPS_EN, OUTPUT);
+    // digitalWrite(PIN_GPS_EN, HIGH);
+    // pinMode(GPS_TX_PIN, OUTPUT);
+    // pinMode(GPS_RX_PIN, INPUT_PULLUP);
 }
\ No newline at end of file
diff --git a/variants/meshlink/variant.h b/variants/meshlink/variant.h
index ede0f405f..e21c96968 100644
--- a/variants/meshlink/variant.h
+++ b/variants/meshlink/variant.h
@@ -24,8 +24,8 @@
 /** Master clock frequency */
 #define VARIANT_MCK (64000000ul)
 
-//#define USE_LFXO // Board uses 32khz crystal for LF
- #define USE_LFRC    // Board uses RC for LF
+// #define USE_LFXO // Board uses 32khz crystal for LF
+#define USE_LFRC // Board uses RC for LF
 
 /*----------------------------------------------------------------------------
  *        Headers
@@ -43,28 +43,25 @@ extern "C" {
 #define NUM_ANALOG_INPUTS (2)
 #define NUM_ANALOG_OUTPUTS (0)
 
-
-
 #define BUTTON_PIN (38) // If defined, this will be used for user button presses,
 #define BUTTON_NEED_PULLUP
 
+// LEDs
+#define PIN_LED1 (24) // 24
+#define PIN_LED2 (-1) // Watchdog enable pin25
+// #define PIN_LED3 (-1)
 
-// LEDs 
-#define PIN_LED1 (24) //24
-#define PIN_LED2 (-1)  //Watchdog enable pin25
-//#define PIN_LED3 (-1)
-
-//#define LED_RED PIN_LED1
-//#define LED_GREEN LED_PIN
+// #define LED_RED PIN_LED1
+// #define LED_GREEN LED_PIN
 #define LED_BLUE PIN_LED1
 
-//#define LED_CONN PIN_LED1
+// #define LED_CONN PIN_LED1
 #define LED_BUILTIN PIN_LED1
 
 #define LED_STATE_ON 0 // State when LED is litted
 #define LED_INVERTED 1
 // Testing USB detection
-//#define NRF_APM
+// #define NRF_APM
 /*
  * Analog pins
  */
@@ -83,10 +80,9 @@ static const uint8_t A7 = PIN_A7;
 #define ADC_RESOLUTION 14
 
 // Other pins
-//#define PIN_AREF (2)
+// #define PIN_AREF (2)
 
-
-//static const uint8_t AREF = PIN_AREF;
+// static const uint8_t AREF = PIN_AREF;
 
 /*
  * Serial interfaces
@@ -94,17 +90,14 @@ static const uint8_t A7 = PIN_A7;
 #define PIN_SERIAL1_RX (40)
 #define PIN_SERIAL1_TX (7)
 
-
-
-
 /*
  * SPI Interfaces
  */
 #define SPI_INTERFACES_COUNT 2
 
-#define PIN_SPI_MISO (8) 
-#define PIN_SPI_MOSI (32 + 9) 
-#define PIN_SPI_SCK (11)  
+#define PIN_SPI_MISO (8)
+#define PIN_SPI_MOSI (32 + 9)
+#define PIN_SPI_SCK (11)
 
 #define PIN_SPI1_MISO (23)
 #define PIN_SPI1_MOSI (21)
@@ -118,17 +111,15 @@ static const uint8_t SCK = PIN_SPI_SCK;
 /*
  * eink display pins
  */
-//#define USE_EINK
+// #define USE_EINK
 
 #define PIN_EINK_CS (15)
 #define PIN_EINK_BUSY (16)
 #define PIN_EINK_DC (14)
-#define PIN_EINK_RES (17) //17
+#define PIN_EINK_RES (17) // 17
 #define PIN_EINK_SCLK (19)
 #define PIN_EINK_MOSI (21) // also called SDI
 
-
-
 /*
  * Wire Interfaces
  */
@@ -164,7 +155,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 
 */
 
-
 #define USE_SX1262
 #define SX126X_CS (12)
 #define SX126X_DIO1 (32 + 1)
@@ -175,8 +165,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
-
-
 // enables 3.3V periphery like GPS or IO Module
 // Do not toggle this for GPS power savings
 #define PIN_3V3_EN (25)
@@ -188,19 +176,17 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 // Therefore must be 1 to keep peripherals powered
 // Power is on the controllable 3V3_S rail
 // #define PIN_GPS_RESET (34)
-//#define HAS_GPS 1
-//#define GNSS_ATGM336H
-//#define GPS_BAUDRATE 9600
-//#undef GPS_RX_PIN
-//#undef GPS_TX_PIN
-//#define PIN_GPS_PPS 36 // Pulse per second input from the GPS
+// #define HAS_GPS 1
+// #define GNSS_ATGM336H
+// #define GPS_BAUDRATE 9600
+// #undef GPS_RX_PIN
+// #undef GPS_TX_PIN
+// #define PIN_GPS_PPS 36 // Pulse per second input from the GPS
 
 #define GPS_TX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the CPU
 #define GPS_RX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the GPS
 
-//#define GPS_THREAD_INTERVAL 50
-
-
+// #define GPS_THREAD_INTERVAL 50
 
 // Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
 #define PIN_GPS_EN (0)
@@ -219,10 +205,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER 1.42
 
-
-
-
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/variants/meshlink_eink/variant.cpp b/variants/meshlink_eink/variant.cpp
index 12f0fc991..801337c0d 100644
--- a/variants/meshlink_eink/variant.cpp
+++ b/variants/meshlink_eink/variant.cpp
@@ -33,24 +33,23 @@ const uint32_t g_ADigitalPinMap[] = {
 void initVariant()
 {
     // LED1 & LED2
-    //pinMode(PIN_LED1, OUTPUT);
-    //ledOff(PIN_LED1);
+    // pinMode(PIN_LED1, OUTPUT);
+    // ledOff(PIN_LED1);
 
-    //pinMode(PIN_LED2, OUTPUT);
-    //ledOff(PIN_LED2);
-    //pinMode(PIN_LED1, OUTPUT);
-    //digitalWrite(PIN_LED1, LOW);
-    pinMode(24,OUTPUT);
+    // pinMode(PIN_LED2, OUTPUT);
+    // ledOff(PIN_LED2);
+    // pinMode(PIN_LED1, OUTPUT);
+    // digitalWrite(PIN_LED1, LOW);
+    pinMode(24, OUTPUT);
     digitalWrite(24, HIGH);
-    //pinMode(25,OUTPUT);
-    //digitalWrite(25, HIGH);
+    // pinMode(25,OUTPUT);
+    // digitalWrite(25, HIGH);
 
     // 3V3 Power Rail
     pinMode(PIN_3V3_EN, OUTPUT);
     digitalWrite(PIN_3V3_EN, HIGH);
-    //pinMode(PIN_GPS_EN, OUTPUT);
-    //digitalWrite(PIN_GPS_EN, HIGH);
-    //pinMode(GPS_TX_PIN, OUTPUT);
-    //pinMode(GPS_RX_PIN, INPUT_PULLUP);
-    
+    // pinMode(PIN_GPS_EN, OUTPUT);
+    // digitalWrite(PIN_GPS_EN, HIGH);
+    // pinMode(GPS_TX_PIN, OUTPUT);
+    // pinMode(GPS_RX_PIN, INPUT_PULLUP);
 }
\ No newline at end of file
diff --git a/variants/meshlink_eink/variant.h b/variants/meshlink_eink/variant.h
index 6a4f5c80b..4da09e87e 100644
--- a/variants/meshlink_eink/variant.h
+++ b/variants/meshlink_eink/variant.h
@@ -24,8 +24,8 @@
 /** Master clock frequency */
 #define VARIANT_MCK (64000000ul)
 
-//#define USE_LFXO // Board uses 32khz crystal for LF
- #define USE_LFRC    // Board uses RC for LF
+// #define USE_LFXO // Board uses 32khz crystal for LF
+#define USE_LFRC // Board uses RC for LF
 
 /*----------------------------------------------------------------------------
  *        Headers
@@ -43,28 +43,25 @@ extern "C" {
 #define NUM_ANALOG_INPUTS (2)
 #define NUM_ANALOG_OUTPUTS (0)
 
-
-
 #define BUTTON_PIN (38) // If defined, this will be used for user button presses,
 #define BUTTON_NEED_PULLUP
 
+// LEDs
+#define PIN_LED1 (24) // 24
+#define PIN_LED2 (-1) // Watchdog enable pin25
+// #define PIN_LED3 (-1)
 
-// LEDs 
-#define PIN_LED1 (24) //24
-#define PIN_LED2 (-1)  //Watchdog enable pin25
-//#define PIN_LED3 (-1)
-
-//#define LED_RED PIN_LED1
-//#define LED_GREEN LED_PIN
+// #define LED_RED PIN_LED1
+// #define LED_GREEN LED_PIN
 #define LED_BLUE PIN_LED1
 
-//#define LED_CONN PIN_LED1
+// #define LED_CONN PIN_LED1
 #define LED_BUILTIN PIN_LED1
 
 #define LED_STATE_ON 0 // State when LED is litted
 #define LED_INVERTED 1
 // Testing USB detection
-//#define NRF_APM
+// #define NRF_APM
 /*
  * Analog pins
  */
@@ -83,10 +80,9 @@ static const uint8_t A7 = PIN_A7;
 #define ADC_RESOLUTION 14
 
 // Other pins
-//#define PIN_AREF (2)
+// #define PIN_AREF (2)
 
-
-//static const uint8_t AREF = PIN_AREF;
+// static const uint8_t AREF = PIN_AREF;
 
 /*
  * Serial interfaces
@@ -94,17 +90,14 @@ static const uint8_t A7 = PIN_A7;
 #define PIN_SERIAL1_RX (40)
 #define PIN_SERIAL1_TX (7)
 
-
-
-
 /*
  * SPI Interfaces
  */
 #define SPI_INTERFACES_COUNT 2
 
-#define PIN_SPI_MISO (8) 
-#define PIN_SPI_MOSI (32 + 9) 
-#define PIN_SPI_SCK (11)  
+#define PIN_SPI_MISO (8)
+#define PIN_SPI_MOSI (32 + 9)
+#define PIN_SPI_SCK (11)
 
 #define PIN_SPI1_MISO (23)
 #define PIN_SPI1_MOSI (21)
@@ -123,12 +116,10 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define PIN_EINK_CS (15)
 #define PIN_EINK_BUSY (16)
 #define PIN_EINK_DC (14)
-#define PIN_EINK_RES (17) //17
+#define PIN_EINK_RES (17) // 17
 #define PIN_EINK_SCLK (19)
 #define PIN_EINK_MOSI (21) // also called SDI
 
-
-
 /*
  * Wire Interfaces
  */
@@ -164,7 +155,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 
 */
 
-
 #define USE_SX1262
 #define SX126X_CS (12)
 #define SX126X_DIO1 (32 + 1)
@@ -175,8 +165,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 
-
-
 // enables 3.3V periphery like GPS or IO Module
 // Do not toggle this for GPS power savings
 #define PIN_3V3_EN (25)
@@ -188,19 +176,17 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 // Therefore must be 1 to keep peripherals powered
 // Power is on the controllable 3V3_S rail
 // #define PIN_GPS_RESET (34)
-//#define HAS_GPS 1
-//#define GNSS_ATGM336H
-//#define GPS_BAUDRATE 9600
-//#undef GPS_RX_PIN
-//#undef GPS_TX_PIN
-//#define PIN_GPS_PPS 36 // Pulse per second input from the GPS
+// #define HAS_GPS 1
+// #define GNSS_ATGM336H
+// #define GPS_BAUDRATE 9600
+// #undef GPS_RX_PIN
+// #undef GPS_TX_PIN
+// #define PIN_GPS_PPS 36 // Pulse per second input from the GPS
 
 #define GPS_TX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the CPU
 #define GPS_RX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the GPS
 
-//#define GPS_THREAD_INTERVAL 50
-
-
+// #define GPS_THREAD_INTERVAL 50
 
 // Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
 #define PIN_GPS_EN (0)
@@ -219,10 +205,6 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER 1.42
 
-
-
-
-
 #ifdef __cplusplus
 }
 #endif