968 Commits

Author	SHA1	Message	Date
Ben Meadors	ca4b98f2b1	Merge branch 'master' into develop	2025-09-09 08:42:29 -05:00
Ben Meadors	d1d16fc25f	Make phone queues use a static pointer queue (#7919) ... * Make phone queues use a static pointer queue * Static init * Compile time constants now * Instead, lets just use the normal pointerqueue for linux native builds and static for IoT platforms * Add missing method * Missing methods * Update variant.h	2025-09-09 08:21:46 -05:00
Ben Meadors	1643249db7	Revert "Remove board_level from Meshtiny. (#7933)" (#7935) ... This reverts commit 2191fe465c.	2025-09-09 05:48:05 -05:00
Wilson	2191fe465c	Remove board_level from Meshtiny. (#7933)	2025-09-09 14:20:24 +08:00
Ben Meadors	569a911455	Merge pull request #7915 from meshtastic/master ... Master backmerge	2025-09-08 05:58:00 -05:00
Manuel	39ff880506	reorganize 8MB partition for MUI devices (#7860) ... * reorganize 8MB partition for MUI devices * update device-install scripts to MUI 8MB partition scheme	2025-09-08 05:56:47 -05:00
Tom Fifield	c5b95f5a4b	Disable web server on Picomputer (#7907) ... Meshtastic no longer fits on the flash of the Picomputer. Since this is a handheld, portable device, it's unlikely that people are connecting to it via the webserver. So, disable the webserver and it fits again: ``` Checking size .pio/build/picomputer-s3-tft/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [=== ] 32.4% (used 106056 bytes from 327680 bytes) Flash: [==========] 99.1% (used 3313913 bytes from 3342336 bytes) ``` Fixes: https://github.com/meshtastic/firmware/issues/7906	2025-09-08 05:56:19 -05:00
Tom Fifield	15f4aebcd5	Fix build error in rak_wismesh_tap_v2 (#7905) ... In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices.	2025-09-08 05:54:08 -05:00
Tom Fifield	227d0fa7dc	Merge pull request #7862 from meshtastic/master ... Backmerge from Master into develop	2025-09-08 11:23:22 +10:00
HarukiToreda	37d14f942e	Reverting changes made by PR #7520 and adjusting ADC (#7878) ... * ADC value adjustment for T114	2025-09-06 06:26:08 -05:00
HarukiToreda	e7b7479589	Reverting changes made by PR #7520 and adjusting ADC (#7878) ... * ADC value adjustment for T114	2025-09-06 19:14:26 +10:00
GUVWAF	a25bfd264c	Only stop retransmissions when receiving implicit ACK over LoRa (#7872) ... * Only stop retransmissions when receiving implicit ACK over LoRa * trunk fmt	2025-09-05 12:00:23 -05:00
GUVWAF	4d6fe936ae	Only stop retransmissions when receiving implicit ACK over LoRa (#7872) ... * Only stop retransmissions when receiving implicit ACK over LoRa * trunk fmt	2025-09-05 11:01:25 -05:00
Manuel	ec9f3fa6ea	T-Lora Pager: fix keyboard and improve rotary wheel haptic (#7869) ... * update RotaryEncoder: use interrupts * increase rotary encoder processing interval * remove disabling peripherals during LS	2025-09-05 07:42:51 -05:00
Ben Meadors	68f07c5f9d	Board extras	2025-09-04 18:39:02 -05:00
Sam Duffield	4881362340	Add support for the Challenger rp2040 lora (#7826) ... * Firmware Built... awaiting parts for test * Add board_level key/value as per suggestion from vidplace7 * Trunk formatting applied	2025-09-04 06:50:25 -05:00
Sam Duffield	f31fd34ce0	Add support for the Challenger rp2040 lora (#7826) ... * Firmware Built... awaiting parts for test * Add board_level key/value as per suggestion from vidplace7 * Trunk formatting applied	2025-09-04 06:49:47 -05:00
Daniel.Cao	e4c7fca716	Add RAK WisMesh Tap V2 (ESP32S3) Hardware Variant (#7741) ... * Add initial variant and platformio configuration for RAK WISMESHTAP V2 * Add initial variant and platformio configuration for rak wismesh tap v2 * Remove unnecessary Meshtastic build flags from rak_wismesh_tap_v2 configuration * Enable LGFX button support in rak_wismesh_tap_v2 configuration * Revert "Enable LGFX button support in rak_wismesh_tap_v2 configuration" This reverts commit 2bd2c1a03b. --------- Co-authored-by: Daniel.Cao <daniel.cao@rakwireless.com>	2025-09-04 06:38:31 -05:00
Chloe Bethel	5b63bd9331	Add RF switch settings for STM32WL variants (#7813) ... * Add RF switch settings for STM32WL variants * Shuffle ifdefs in STM32WLE5JCInterface to make it not get built by other targets	2025-09-04 06:38:05 -05:00
Jonathan Bennett	09a0df3a1f	Enable bmx160 on native (#7844)	2025-09-04 06:24:04 -05:00
Andrew Yong	fe329892de	feat: New ESP32 variant 9m2ibr_aprs_lora_tracker (#7828) ... 9M2IBR APRS LoRa Tracker: ESP32-WROOM-32 + EBYTE E22-400M30S https://shopee.com.my/product/1095224/21692283917 Originally developed for LoRa_APRS_iGate and GPIO assignment is similar to https://github.com/richonguzman/LoRa_APRS_iGate/blob/main/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-09-04 06:18:28 -05:00
Jonathan Bennett	cc37535b2d	Enable bmx160 on native (#7844)	2025-09-04 06:16:38 -05:00
Chloe Bethel	2e8f4ad6af	Add RF switch settings for STM32WL variants (#7813) ... * Add RF switch settings for STM32WL variants * Shuffle ifdefs in STM32WLE5JCInterface to make it not get built by other targets	2025-09-04 15:12:47 +10:00
Jonathan Bennett	1c1c0cc791	Portduino config refactor (#7796) ... * Start portduino_config refactor * refactor GPIOs to new portduino_config * More portduino_config work * More conversion to portduino_config * Finish portduino_config transition * trunk * yaml output work * Simplify the GPIO config * Trunk	2025-09-03 17:50:26 -05:00
Daniel.Cao	5850a7cd6b	Add RAK WisMesh Tap V2 (ESP32S3) Hardware Variant (#7741) ... * Add initial variant and platformio configuration for RAK WISMESHTAP V2 * Add initial variant and platformio configuration for rak wismesh tap v2 * Remove unnecessary Meshtastic build flags from rak_wismesh_tap_v2 configuration * Enable LGFX button support in rak_wismesh_tap_v2 configuration * Revert "Enable LGFX button support in rak_wismesh_tap_v2 configuration" This reverts commit 2bd2c1a03b. --------- Co-authored-by: Daniel.Cao <daniel.cao@rakwireless.com>	2025-09-03 06:20:19 -05:00
Chloe Bethel	0bd4cefad3	Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797) ... * Show ExternalNotification as excluded if it is * Enable ExternalNotification, SerialModule and RangeTest on STM32WL * Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin * Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1) * Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.	2025-09-02 07:09:15 -05:00
Chloe Bethel	0952007805	Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797) ... * Show ExternalNotification as excluded if it is * Enable ExternalNotification, SerialModule and RangeTest on STM32WL * Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin * Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1) * Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.	2025-09-02 07:08:57 -05:00
Ben Meadors	3b82d55176	Revert "Add gat562_mesh_tracker_pro device. (#7815)" (#7824) ... This reverts commit 7d1300ab66.	2025-09-02 06:17:01 -05:00
Tom Fifield	a6b8202cd4	Hold for 20s after GPS lock (#7801) ... * Hold for >20s after GPS lock GPS chips are designed to stay locked for a while to download some data and save it. This data is important for speeding up future locks, and making them higher quality. Our present configuration could make every lock perform similar to first lock. This patch sets a hold of between 20s and 10% of the lock search time after lock is acquired. This should allow the GPS to finish its work before we turn it off. Fixes https://github.com/meshtastic/firmware/issues/7466 * Remove T1000E-specific GPS holds The new code does the same thing, for all devices. * Fix publishing settings * Cleanups, removing unused variables. * ifdef log line with GPS_DEBUG * fixQual is not a bool.	2025-09-02 06:06:06 -05:00
Tom Fifield	c5fad6cca1	Hold for 20s after GPS lock (#7801) ... * Hold for >20s after GPS lock GPS chips are designed to stay locked for a while to download some data and save it. This data is important for speeding up future locks, and making them higher quality. Our present configuration could make every lock perform similar to first lock. This patch sets a hold of between 20s and 10% of the lock search time after lock is acquired. This should allow the GPS to finish its work before we turn it off. Fixes https://github.com/meshtastic/firmware/issues/7466 * Remove T1000E-specific GPS holds The new code does the same thing, for all devices. * Fix publishing settings * Cleanups, removing unused variables. * ifdef log line with GPS_DEBUG * fixQual is not a bool.	2025-09-02 06:05:14 -05:00
Wilson	7d1300ab66	Add gat562_mesh_tracker_pro device. (#7815)	2025-09-02 13:06:24 +08:00
Onyx Clawe	102c447fe3	Update variant.h (#7520) ... Updated ADC, Full charge now results in 100% charge being reported instead of 95% charge Co-authored-by: OnyxtheDragon <58921814+OnyxtheDragon@users.noreply.github.com>	2025-09-02 14:31:41 +10:00
Jonathan Bennett	bd3cbfc1ad	Add support for the RV-3028 on native Linux (#7802)	2025-09-01 08:04:04 -05:00
Onyx Clawe	edeb25cab5	Update variant.h (#7520) ... Updated ADC, Full charge now results in 100% charge being reported instead of 95% charge Co-authored-by: OnyxtheDragon <58921814+OnyxtheDragon@users.noreply.github.com>	2025-09-01 07:57:15 -05:00
Jonathan Bennett	ca79760372	Add support for the RV-3028 on native Linux (#7802)	2025-08-31 21:08:58 -05:00
Wilson	4a669032dc	Change user button to cancel button on meshtiny. (#7789)	2025-08-30 08:37:18 +08:00
Ben Meadors	8685436cbb	Merge pull request #7773 from meshtastic/master ... Backmerge	2025-08-27 20:53:55 -05:00
Ben Meadors	25a19b49ad	This one is not working yet	2025-08-27 15:18:26 -05:00
Ben Meadors	a4d96bebfb	Drop for now	2025-08-27 14:35:29 -05:00
Ben Meadors	26c38ffc8e	Remove debug logging	2025-08-27 11:55:27 -05:00
Ben Meadors	0903ed8232	Mesh solar integrate (#7764) ... * Added HELTEC MeshSolar board. (#7499) * Added HELTEC MeshSolar board. * Set emergency shutdown pin as high impedance * Set emergency shutdown pin as high impedance Set emergency shutdown pin as high impedance * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update I2C SCL pin definition in variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Updates --------- Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-27 06:02:54 -05:00
Ben Meadors	f8ba392a24	Add BaseUI support for L1 EInk (#7751) ... * Add BaseUI support for L1 EInk * Fix Eink offset * Add joystick * Updates * Adjust Seeed Wio Tracker L1 E-Ink variant (#7326) * Rename variant Needs the -inkhud suffix to work correctly with the web flasher * Display driver for ZJY122250_0213BAAMFGN * Remove dead code from nicheGraphics.h Remnants of T-Echo's nicheGraphics.h file, which was used as a template. * Use ZJY122250_0213BAAMFGN driver Improves display health. We don't need as many full refreshes now. * Tidying * board_check = true --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consolidation * Add hack for existing InkHUD button functionality --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com>	2025-08-26 20:29:11 -05:00
Manuel	596cd7e0b6	enable device telemetry (#7757)	2025-08-26 13:39:43 -05:00
Manuel	3f5c30e3b3	T-Lora Pager (#7613) ... * initial commit * preset rotary1 encoder * define TAB+ESC * haptic feedback * allow switch off haptic feedback * enable audio amplifier * include PR4684 * fix for tft target * add ES8311 audio codec * fix KB scan duplicate * display workaround to avoid debris * fix debris on display * keyboard backlight * enable screen options * fsm based bounce-free rotary encoder implementation * use fsm RotaryEncoder only for T-Lora Pager * change inputbroker default config to allow using rotary wheel for screens AND menues --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 09:35:25 -05:00
m1nl	5aa486d6c2	set HAS_32768HZ for Heltec V3 board	2025-08-25 19:56:15 +02:00
m1nl	ba26d03b1b	standarize values of HAS_32768HZ capability flag	2025-08-25 19:44:13 +02:00
Lewis He	5136c8ba24	The T-Deck-Pro 4G version sets the modem to be disabled by default. (#7715) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-23 06:46:59 -05:00
Jonathan Bennett	5ce47045e7	Add SDL option to BaseUI on Native (#7568) ... * Add SDL option to BaseUI on Native * Update to latest LovyanGFX PR and use LGFX_SDL define * Move SDL backend to native-sdl target	2025-08-20 12:51:14 -05:00
Wilson	f413c49555	Add Meshtiny device (#7676) ... * Add Meshtiny device - nRF52 OLED upDown encoder * Update platformio.ini * Update platformio.ini * Add GPS Exclude to Meshtiny. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-20 11:52:10 +08:00
Thomas Göttgens	9feb1d378e	Support for T-Echo Lite, credits to @Szetya for doing all the heavy lifting! (#7636) ... * Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting! * move define to ini file	2025-08-17 13:37:12 +02:00