943 Commits

Author	SHA1	Message	Date
GUVWAF	a25bfd264c	Only stop retransmissions when receiving implicit ACK over LoRa (#7872) ... * Only stop retransmissions when receiving implicit ACK over LoRa * trunk fmt	2025-09-05 12:00:23 -05:00
Manuel	ec9f3fa6ea	T-Lora Pager: fix keyboard and improve rotary wheel haptic (#7869) ... * update RotaryEncoder: use interrupts * increase rotary encoder processing interval * remove disabling peripherals during LS	2025-09-05 07:42:51 -05:00
Ben Meadors	68f07c5f9d	Board extras	2025-09-04 18:39:02 -05:00
Sam Duffield	4881362340	Add support for the Challenger rp2040 lora (#7826) ... * Firmware Built... awaiting parts for test * Add board_level key/value as per suggestion from vidplace7 * Trunk formatting applied	2025-09-04 06:50:25 -05:00
Daniel.Cao	e4c7fca716	Add RAK WisMesh Tap V2 (ESP32S3) Hardware Variant (#7741) ... * Add initial variant and platformio configuration for RAK WISMESHTAP V2 * Add initial variant and platformio configuration for rak wismesh tap v2 * Remove unnecessary Meshtastic build flags from rak_wismesh_tap_v2 configuration * Enable LGFX button support in rak_wismesh_tap_v2 configuration * Revert "Enable LGFX button support in rak_wismesh_tap_v2 configuration" This reverts commit 2bd2c1a03b. --------- Co-authored-by: Daniel.Cao <daniel.cao@rakwireless.com>	2025-09-04 06:38:31 -05:00
Chloe Bethel	5b63bd9331	Add RF switch settings for STM32WL variants (#7813) ... * Add RF switch settings for STM32WL variants * Shuffle ifdefs in STM32WLE5JCInterface to make it not get built by other targets	2025-09-04 06:38:05 -05:00
Jonathan Bennett	09a0df3a1f	Enable bmx160 on native (#7844)	2025-09-04 06:24:04 -05:00
Andrew Yong	fe329892de	feat: New ESP32 variant 9m2ibr_aprs_lora_tracker (#7828) ... 9M2IBR APRS LoRa Tracker: ESP32-WROOM-32 + EBYTE E22-400M30S https://shopee.com.my/product/1095224/21692283917 Originally developed for LoRa_APRS_iGate and GPIO assignment is similar to https://github.com/richonguzman/LoRa_APRS_iGate/blob/main/variants/ESP32_DIY_1W_LoRa_Mesh_V1_2/board_pinout.h Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-09-04 06:18:28 -05:00
Chloe Bethel	0bd4cefad3	Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797) ... * Show ExternalNotification as excluded if it is * Enable ExternalNotification, SerialModule and RangeTest on STM32WL * Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin * Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1) * Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.	2025-09-02 07:09:15 -05:00
Ben Meadors	3b82d55176	Revert "Add gat562_mesh_tracker_pro device. (#7815)" (#7824) ... This reverts commit 7d1300ab66.	2025-09-02 06:17:01 -05:00
Tom Fifield	a6b8202cd4	Hold for 20s after GPS lock (#7801) ... * Hold for >20s after GPS lock GPS chips are designed to stay locked for a while to download some data and save it. This data is important for speeding up future locks, and making them higher quality. Our present configuration could make every lock perform similar to first lock. This patch sets a hold of between 20s and 10% of the lock search time after lock is acquired. This should allow the GPS to finish its work before we turn it off. Fixes https://github.com/meshtastic/firmware/issues/7466 * Remove T1000E-specific GPS holds The new code does the same thing, for all devices. * Fix publishing settings * Cleanups, removing unused variables. * ifdef log line with GPS_DEBUG * fixQual is not a bool.	2025-09-02 06:06:06 -05:00
Wilson	7d1300ab66	Add gat562_mesh_tracker_pro device. (#7815)	2025-09-02 13:06:24 +08:00
Jonathan Bennett	bd3cbfc1ad	Add support for the RV-3028 on native Linux (#7802)	2025-09-01 08:04:04 -05:00
Onyx Clawe	edeb25cab5	Update variant.h (#7520) ... Updated ADC, Full charge now results in 100% charge being reported instead of 95% charge Co-authored-by: OnyxtheDragon <58921814+OnyxtheDragon@users.noreply.github.com>	2025-09-01 07:57:15 -05:00
Ben Meadors	25a19b49ad	This one is not working yet	2025-08-27 15:18:26 -05:00
Ben Meadors	a4d96bebfb	Drop for now	2025-08-27 14:35:29 -05:00
Ben Meadors	26c38ffc8e	Remove debug logging	2025-08-27 11:55:27 -05:00
Ben Meadors	0903ed8232	Mesh solar integrate (#7764) ... * Added HELTEC MeshSolar board. (#7499) * Added HELTEC MeshSolar board. * Set emergency shutdown pin as high impedance * Set emergency shutdown pin as high impedance Set emergency shutdown pin as high impedance * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update I2C SCL pin definition in variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Updates --------- Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-27 06:02:54 -05:00
Ben Meadors	f8ba392a24	Add BaseUI support for L1 EInk (#7751) ... * Add BaseUI support for L1 EInk * Fix Eink offset * Add joystick * Updates * Adjust Seeed Wio Tracker L1 E-Ink variant (#7326) * Rename variant Needs the -inkhud suffix to work correctly with the web flasher * Display driver for ZJY122250_0213BAAMFGN * Remove dead code from nicheGraphics.h Remnants of T-Echo's nicheGraphics.h file, which was used as a template. * Use ZJY122250_0213BAAMFGN driver Improves display health. We don't need as many full refreshes now. * Tidying * board_check = true --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consolidation * Add hack for existing InkHUD button functionality --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com>	2025-08-26 20:29:11 -05:00
Manuel	596cd7e0b6	enable device telemetry (#7757)	2025-08-26 13:39:43 -05:00
Manuel	3f5c30e3b3	T-Lora Pager (#7613) ... * initial commit * preset rotary1 encoder * define TAB+ESC * haptic feedback * allow switch off haptic feedback * enable audio amplifier * include PR4684 * fix for tft target * add ES8311 audio codec * fix KB scan duplicate * display workaround to avoid debris * fix debris on display * keyboard backlight * enable screen options * fsm based bounce-free rotary encoder implementation * use fsm RotaryEncoder only for T-Lora Pager * change inputbroker default config to allow using rotary wheel for screens AND menues --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 09:35:25 -05:00
Lewis He	5136c8ba24	The T-Deck-Pro 4G version sets the modem to be disabled by default. (#7715) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-23 06:46:59 -05:00
Jonathan Bennett	5ce47045e7	Add SDL option to BaseUI on Native (#7568) ... * Add SDL option to BaseUI on Native * Update to latest LovyanGFX PR and use LGFX_SDL define * Move SDL backend to native-sdl target	2025-08-20 12:51:14 -05:00
Wilson	f413c49555	Add Meshtiny device (#7676) ... * Add Meshtiny device - nRF52 OLED upDown encoder * Update platformio.ini * Update platformio.ini * Add GPS Exclude to Meshtiny. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-20 11:52:10 +08:00
Thomas Göttgens	9feb1d378e	Support for T-Echo Lite, credits to @Szetya for doing all the heavy lifting! (#7636) ... * Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting! * move define to ini file	2025-08-17 13:37:12 +02:00
Ben Meadors	a02017a5c8	Remove JSON serialization from most NRF52 targets (#7640) ... * Remove JSON serialization from most NRF52 targets * Slin networking base down for NRF52 by removing syslog * Update platformio.ini	2025-08-15 19:45:41 -05:00
Jonathan Bennett	4a241deb96	Thinknode button and backlight fixes (#7641) ... * Thinknode button and backlight fixes * Save backlight value between reboots	2025-08-15 14:41:21 -05:00
Austin	52f0e5a3db	Fix 'buildroot' target (OpenWRT) (#7620)	2025-08-14 12:31:25 -05:00
Jonathan Bennett	691327b2db	Initial support for the ThinkNode M5 (#7502) ... * Initial support for the ThinkNode M5 * Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Cleanup variant.h for Elecrow Thinknode M5 * Properly detect battery voltage * Turn backlight off when screen sleeps --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-08-07 06:28:15 -05:00
Ben Meadors	88655ffc44	Move BLE toggle menu option and add confirmation for canned messages in L1 (#7516) ... * Move bluetooth to system menu and add confirmation for canned messages * Cruft * Handle else * Warn * Fixed screen reset	2025-07-31 07:34:41 -05:00
Thomas Göttgens	608fdc6f52	Santa may be checking his list twice, but we only need this in the platformio.ini (#7490)	2025-07-28 09:47:46 -05:00
Iris	fc1e6ccb8c	Rename Platformio.ini to platformio.ini (#7468)	2025-07-26 05:13:02 -05:00
Iris	bbc638ab82	Create Platformio.ini (#7450)	2025-07-25 15:36:37 -05:00
Austin	4f57a2e248	Build RP2350 (Pi Pico 2) (#7441)	2025-07-25 22:25:50 +02:00
Austin	4f895f744b	Take control of our PRs! (#7445)	2025-07-24 06:13:23 -05:00
Austin	6c12baf4ed	Migrate remaining variants to new dir structure (#7412)	2025-07-21 19:28:14 -05:00
Austin	9b983b6487	nRF52840: Migrate variants to new structure (#7396)	2025-07-21 14:13:02 -05:00
Manuel	b3525c2569	T-Deck Pro support (#6936) ... * initial draft * fix touchscreen * fix touchscreen * optimize GPS * battery management * cleanup comments * enable vibration motor * refactored TCA8418Keyboard * update HW_VENDOR id * manual fixes after merge * fix keyboard/BQ27220 detection * add BQ27220 * modify charge voltage and current * update XpowerLib * design capacity * try-fix charge behavior * improve Vbus detection * moved variant into esp32s3 folder --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-07-21 19:33:24 +02:00
Austin	475cfe4af2	ESP32s3: Migrate variants to new structure (#7343)	2025-07-20 16:47:37 -05:00
Thomas Göttgens	a9c9b96eb6	UDP for RAK4631 Eth Gw and the t-eth-elite. Solves #7149 (#7385) ... * UDP for RAK4631 Eth Gw and the t-eth-elite. Also enable IP output on Portduino. Solves #7149 * Copilot suggestion Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix portduino build * initialize local port --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-20 06:22:00 -05:00
Austin	1c2a3c620f	STM32: Migrate variants to new structure (#7389)	2025-07-20 06:21:17 -05:00
Austin	9313d04726	RP2040/RP2350: Migrate variants to new structure (#7345)	2025-07-20 06:20:57 -05:00
Austin	855514b4f3	ESP32c3: Migrate variants to new structure (#7342)	2025-07-19 19:55:33 -05:00
Austin	974741a366	ESP32: Initial sort variants by platform (#7340)	2025-07-19 18:41:59 -05:00
Ben Meadors	39716ed1ba	Fix L1 EInk HWModel (#7346)	2025-07-14 21:14:07 -05:00
Austin	5776385e8c	STM32 PlatformIO cleanup (#7339)	2025-07-14 12:52:21 -05:00
Daniel.Cao	e864fcf9a8	feat: add support for RAK Wismesh Tag hardware platform (#6853) ... * add new platform rak_wismeshtag * Remove RTC and Ethernet definitions from variant.h * Remove unused EINK and Ethernet definitions from variant.h and platformio.ini * Add WISMESH_TAG hardware model definition in architecture.h and update build flags in platformio.ini * Remove unused build flags and dependencies --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: daniel <daniel.cao@rakwireless.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-07-14 16:29:42 +02:00
Chloe Bethel	1be4fc5ae9	GPS for STM32WL (#7297) ... * Enable GPS for Wio-E5 variant on Serial2 * Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it. * Don't try to send ATAK packets if ATAK is disabled, +4k flash	2025-07-14 05:12:26 -05:00
Andrew Yong	b49e59b904	xiao_ble README.md updates (#7283) ... * docs(xiao_ble): Simplify building and flashing instructions - **Update Bootloader** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice - **PlatformIO Environment Preparation** - deleted this section, as Meshtastic now builds-in a compatible SoftDevice - **Build Meshtastic** - simplified it greatly by referring to Meshtastic documentation - **Flash the firmware to the Xiao BLE** - simplified it greatly as Meshtastic now builds firmware.uf2; added some observations for a succesful flash Light cleanup of Markdown and renumbering of sections. Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Replace some HTML with Markdown, cleanup Markdown Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Update SX126X_TXEN definition location Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Fresher information about E22 modules Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Instructions for E22...M33S modules Also re-order the Build section to come after the Wiring section since the build instructions require special attention if the wiring/modules differ from the variant's expected pins/module. Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Rename all XIAO BLE to XIAO nRF52840 Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): Remove note about Linux since shell script is gone Signed-off-by: Andrew Yong <me@ndoo.sg> * docs(xiao_ble): trunk fmt and fix links Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-07-13 06:17:50 -05:00
Andrew Yong	0133c5dc9e	feat: New variant esp32c3_super_mini (#7133) ... https://www.espboards.dev/esp32/esp32-c3-super-mini/ DIY build by @AntonKartajaya on Meshtastic Discord and a PCB version WIP by https://github.com/NomDeTom. - I2C - I2C_SDA: 1 - I2C_SCL: 0 - OLED: SSD1306 - GPS - GPS_RX_PIN: 20 - GPS_TX_PIN: 21 - Button - BUTTON_PIN: 9 - SPI - SCK: 10 - MISO: 6 - MOSI: 7 - CS: 8 - LoRa: SX1262 - LORA_RESET: 5 - LORA_DIO1: 3 - LORA_RXEN: 2 - LORA_BUSY: 4 Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-07-13 06:12:24 -05:00