* Add missed include
* Another Warning fix
* Add another HAS_SCREEN
* Namespace fixes
* Removed depricated destination types and re-factored destination screen
* Get rid of Arduino Strings
* Clean up after Copilot
* SixthLine Def, Screen Rename
Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment
* Consistency is hard - fixed "Sixth"
* System Frame Updates
Adjusted line construction to ensure we fit maximum content per screen.
* Fix up notifications
* Add a couple more ifdef HAS_SCREEN lines
* Add screen->isOverlayBannerShowing()
* Don't forget the invert!
* Adjust Nodelist Center Divider
Adjust Nodelist Center Divider
* Fix variable casting
* Fix entryText variable as empty before update to fix validation
* Altitude is int32_t
* Update PowerTelemetry to have correct data type
* Fix cppcheck warnings (#6945)
* Fix cppcheck warnings
* Adjust logic in Power.cpp for power sensor
---------
Co-authored-by: Jason P <applewiz@mac.com>
* More pixel wrangling so things line up NodeList edition
* Adjust NodeList alignments and plumb some background padding for a possible title fix
* Better alignment for banner notifications
* Move title into drawCommonHeader; initial screen tested
* Fonts make spacing items difficult
* Improved beeping booping and other buzzer based feedback (#6947)
* Improved beeping booping and other buzzer based feedback
* audible button feedback (#6949)
* Refactor
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Sandpapered the corners of the notification popup
* Finalize drawCommonHeader migration
* Update Title of Favorite Node Screens
* Update node metric alignment on LoRa screen
* Update the border for popups to separate it from background
* Update PaxcounterModule.cpp with CommonHeader
* Update WiFi screen with CommonHeader and related data reflow
* It was not, in fact, pointing up
* Fix build on wismeshtap
* T-deck trackball debounce
* Fix uptime on Device Focused page to actually detail
* Update Sys screen for new uptime, add label to Freq/Chan on LoRa
* Don't display DOP any longer, make Uptime consistent
* Revert Uptime change on Favorites, Apply to Device Focused
* Label the satelite number to avoid confusion
* Boop boop boop boop
* Correct GPS positioning and string consistency across strings for GPS
* Fix GPS text alignment
* Enable canned messages by default
* Don't wake screen on new nodes
* Cannedmessage list emote support added
* Fn+e emote picker for freetext screen
* Actually block CannedInput actions while display is shown
* Add selection menu to bannerOverlay
* Off by one
* Move to unified text layouts and spacing
* Still my Fav without an "e"
* Fully remove EVENT_NODEDB_UPDATED
* Simply LoRa screen
* Make some char pointers const to fix compilation on native targets
* Update drawCompassNorth to include radius
* Fix warning
* button thread cleanup
* Pull OneButton handling from PowerFSM and add MUI switch (#6973)
* Trunk
* Onebutton Menu Support
* Add temporary clock icon
* Add gps location to fsi
* Banner message state reset
* Cast to char to satisfy compiler
* Better fast handling of input during banner
* Fix warning
* Derp
* oops
* Update ref
* Wire buzzer_mode
* remove legacy string->print()
* Only init screen if one found
* Unsigned Char
* More buttonThread cleaning
* screen.cpp button handling cleanup
* The Great Event Rename of 2025
* Fix the Radiomaster
* Missed trackball type change
* Remove unused function
* Make ButtonThread an InputBroker
* Coffee hadn't kicked in yet
* Add clock icon for Navigation Bar
* Restore clock screen definition code - whoops
* ExternalNotifications now observe inputBroker
* Clock rework (#6992)
* Move Clock bits into ClockRenderer space
* Rework clock into all device navigation
* T-Watch Actually Builds Different
* Compile fix
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add AM/PM to Digital Clock
* Flip Seconds and AM/PM on Clock Display
* Tik-tok pixels are hard
* Fix builds on Thinknode M1
* Check for GPS and don't crash
* Don't endif til the end
* Rework the OneButton thread to be much less of a mess. (#6997)
* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily
* Update src/input/ButtonThread.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix GPS toggle
* Send the shutdown event, not just the kbchar
* Honor the back button in a notificaiton popup
* Draw the right size box for popup with options
* Try to un-break all the things
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* 24-hour Clock Should have leading zero, but not 12-hour
* Fixup some compile errors
* Add intRoutine to ButtonThread init, to get more responsive user button back
* Add Timezone picker
* Fix Warning
* Optionally set the initial selection for the chooser popup
* Make back buttons work in canned messages
* Drop the wrapper classes
* LonPressTime now configurable
* Clock Frame can not longer be blank; just add valid time
* Back buttons everywhere!
* Key Verification confirm banner
* Make Elecrow M* top button a back button
* Add settings saves
* EInk responsiveness fixes
* Linux Input Fixes
* Add Native Trackball/Joystick support, and move UserButton to Input
* No Flight Stick Mode
* Send input event
* Add Channel Utilization to Device Focused frame
* Don't shift screens when we draw new ones
* Add showOverlayBanner arguments to no-op
* trunk
* Default Native trackball to NC
* Fix crash in simulator mode
* Add longLong button press
* Get the args right
* Adjust Bluetooth Pairing Screen to account for bottom navigation.
* Trackball everywhere, and unPhone buttons
* Remap visionmaster secondary button to TB_UP
* Kill ScanAndSelect
* trunk
* No longer need the canned messages input filter
* All Canned All the time
* Fix stm32 compile error regarding inputBroker
* Unify tft lineheights (#7033)
* Create variable line heights based upon SCREEN_HEIGHT
* Refactor textPositions into method -> getTextPositions
* Update SharedUIDisplay.h
---------
Co-authored-by: Jason P <applewiz@mac.com>
* Adjust top distance for larger displays
* Adjust icon sizes for larger displays
* Fix Paxcounter compile errors after code updates
* Pixel wrangling to make larger screens fit better
* Alert frame has precedence over banner -- for now
* Unify on ALT_BUTTON
* Align AM/PM to the digit, not the segment on larger displays
* Move some global pin defines into configuration.h
* Scaffolding for BMM150 9-axis gyro
* Alt button behavior
* Don't add the blank GPS frames without HAS_GPS
* EVENT_NODEDB_UPDATED has been retired
* Clean out LOG_WARN messages from debugging
* Add dismiss message function
* Minor buttonThread cleanup
* Add BMM150 support
* Clean up last warning from dev
* Simplify bmm150 init return logic
* Add option to reply to messages
* Add minimal menu upon selecting home screen
* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp
* Properly dismiss message
* T-Deck Trackball press is not user button
* Add select on favorite frame to launch cannedMessage DM
* Minor wording change
* Less capital letters
* Fix empty message check, time isn't reliable
* drop dead code
* Make UIRenderer a static class instead of namespace
* Fix the select on favorite
* Check if message is empty early and then 'return'
* Add kb_found, and show the option to launch freetype if appropriate
* Ignore impossible touchscreen touches
* Auto scroll fix
* Move linebreak after "from" for banners to maximize screen usage.
* Center "No messages to show" on Message frame
* Start consolidating buzzer behavior
* Fixed signed / unsigned warning
* Cast second parameter of max() to make some targets happy
* Cast kbchar to (char) to make arduino string happy
* Shorten the notice of "No messages"
* Add buzzer mode chooser
* Add regionPicker to Lora icon
* Reduce line spacing and reorder Position screen to resolve overlapping issues
* Update message titles, fix GPS icons, add Back options
* Leftover boops
* Remove chirp
* Make the region selection dismissable when a region is already set
* Add read-aloud functionality on messages w/ esp8266sam
* "Last Heard" is a better label
* tweak the beep
* 5 options
* properly tear down freetext upon cancel
* de-convelute canned messages just a bit
* Correct height of Mail icon in navigation bar
* Remove unused warning
* Consolidate time methods into TimeFormatters
* Oops
* Change LoRa Picker Cancel to Back
* Tweak selection characters on Banner
* Message render not scrolling on 5th line
* More fixes for message scrolling
* Remove the safety next on text overflow - we found that root cause
* Add pin definitions to fix compilation for obscure target
* Don't let the touchscreen send unitialized kbchar values
* Make virtual KB just a bit quicker
* No more double tap, swipe!
* Left is left, and Right is right
* Update horizontal lightning bolt design
* Move from solid to dashed separator for Message Frame
* Single emote feature fix
* Manually sort overlapping elements for now
* Freetext and clearer choices
* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)
* Remove BaseUI branding
* Capitalization is fun
* Revert Meshtastic Boot Frame Changes
* Add ANZ_433 LoRa region to picker
* Update settings.json
---------
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 )
* oops - mean't to mark the _dbg variant as an 'extra' board.
* powermon wip
* Make serial port on wio-sdk-wm1110 board work
By disabling the (inaccessible) adafruit USB
* Instrument (radiolib only for now) lora for powermon
per https://github.com/meshtastic/firmware/issues/4136
* powermon gps support
https://github.com/meshtastic/firmware/issues/4136
* Add CPU deep and light sleep powermon states
https://github.com/meshtastic/firmware/issues/4136
* Change the board/swversion bootstring so it is a new "structured" log msg.
* powermon wip
* add example script for getting esp S3 debugging working
Not yet used but I didn't want these nasty tricks to get lost yet.
* Add PowerMon reporting for screen and bluetooth pwr.
* make power.powermon_enables config setting work.
* update to latest protobufs
* fix bogus shellcheck warning
* make powermon optional (but default enabled because tiny and no runtime impact)
* tell vscode, if formatting, use whatever our trunk formatter wants
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)
Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs. I guess I'll start letting that happen with
my future commits ;-).
* add PowerStress module
* nrf52 arduino is built upon freertos, so let platformio debug it
* don't accidentally try to Segger ICE if we are using another ICE
* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.
* remove NoopPrint - it is no longer needed
* when talking to API clients via serial, don't turn off log msgs instead encapsuate them
* fix the build - would loop forever if there were no files to send
* don't use Segger code if not talking to a Segger debugger
* when encapsulating logs, make sure the strings always has nul terminators
* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.
* Important to not print debug messages while writing to the toPhone scratch buffer
* don't include newlines if encapsulating log records as protobufs
* update to latest protobufs (needed for powermon goo)
* PowerStress WIP
* for #4154 and #4136 add concept of dependent gpios...
Which is currently only tested with the LED but eventually
will be used for shared GPIO/screen power rail enable
and LED forcing (which is a sanity check in the power stress
testing)
* fix linter warning
* Transformer is a better name for the LED input > operation > output classes
* PMW led changes to work on esp32-s3
* power stress improvements
* allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types
This allows 'lossless' log reading. If client has requested INDICATE
(rather than NOTIFY) each log record emitted via log() will have to fetched
by the client device before the meshtastic node can continue.
* Fix serious problem with nrf52 BLE logging.
When doing notifies of LogRecords it is important to use the
binary write routines - writing using the 'string' write won't work.
Because protobufs can contain \0 nuls inside of them which if being
parsed as a string will cause only a portion of the protobuf to be sent.
I noticed this because some log messages were not getting through.
* fix gpio transformer stuff to work correctly with LED_INVERTED
Thanks @todd-herbert for noticing this and the great stack trace.
The root cause was that I had accidentially shadowed outPin in a subclass
with an unneeded override. It would break on any board that had inverted
LED power.
fixes
https://github.com/meshtastic/firmware/pull/4230#pullrequestreview-2217389099
* Support driving multiple output gpios from one input.
While investigating https://github.com/meshtastic/firmware/pull/4230#pullrequestreview-2217389099
I noticed in variant.h that there are now apparently newer TBEAMs than mine
that have _both_ a GPIO based power LED and the PMU based LED. Add a splitter
so that we can drive two output GPIOs from one logical signal.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
While working on #4378 I noticed a funny problem: the blinking system
LED was on during deep-sleep. Initially I thought it was some weird
sleep hw config thing but it turns out it was easier but more pervasive.
We had two different preprocessor symbols which both meant approximately the same
thing LED_INVERTED and LED_STATE_ON (though their polarity was opposite).
Some variant files were setting one, others were setting the other, and others were
setting both. heh.
In the case of the board I was testing (seeed tracker wio 1100) it was only setting one
and the default behavior for the other (for all boards) was incorrect. So I did a grep
and it seems like LED_STATE_ON was used more often, so I kept that one and removed
LED_INVERTED everywhere.
* T-Watch WIP
* Updates
* Temp
* Update screen spi bus and and backlight en
* Peripherals progress
* Fixes
* Fixes
* Updates
* DRV scaffolding
* Fixed touch-screen driver selection. WIP on DRV haptic feedback
* DRV2605 pmu channel
* Trunk
* Fixes and defaults
* Dropped an s
* Move PMU and turn off screen that way
* Add t-deck and t-watch-s3 to CI and cleanup
* More cleanup
