5463 Commits

Author	SHA1	Message	Date
github-actions[bot]	0561f2ca4b	[create-pull-request] automated change (#7082) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-06-19 18:57:18 -05:00
Andrew Yong	58743021c8	XIAO BLE cleanup (supporting changes to seeed_xiao_nrf52840_kit too) (#7024) ... * chore(seeed_xiao_nrf52840_kit): Use build flag for L76K GNSS, rename variant.h ifdef Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Support multiple SX126x pinouts via build flags Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Pin D0 as user button if pin is unused Signed-off-by: Andrew Yong <me@ndoo.sg> * feat: EBYTE E22 and NiceRF gain and SX1262 max power defines Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(xiao_ble): Move variant to DIY and extend from seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Pin D6, D7 as I2C SDA, SCL if pins are unused Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-19 18:51:33 -05:00
Justin E. Mann	2fb46ce5d5	Add rak12035 VB Soil Monitor Tested & Working (#6741) ... * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * Update to 1.0.4 release of RAK12035_SoilMoisture * cleanup * cool * . * .. * little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500 looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500. improvements could be made around the configuration of the monitor. next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity. * . comments about current limitations and TODOs * trunk update * trying to autoformat.. * fix formatting attempt 2 * .. * ... * ... * . * some corrections and local build success * correction in temp code * grr formatting * cleanup after a few experiments * remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos. * update some values in varient for rak wistap * working out trunk formatting.. * wip . corrections to other build variants * . * protobuffs? * protobufs? * Update protobufs ref * Protobufs ref * Trunk * Update RAK12035Sensor.cpp * Fmt * comment changes * dumb mistakes... resolved, actually built and tested.. all good.. * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * . proto submod * proto * proto * merge master * mabe a fix for GPS pin conflict, waiting on a new gps module to try * merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035 * . * . --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-19 18:51:03 -05:00
Marek	8be76a56c7	PacketHistory - option to track entries' aging to log (#7067) ... * PacketHistory debloat RAM allocations * Removed FLOOD_EXPIRE_TIME option. We have static buffer now. * Remove mx_ prefix from recentPackets * Remember no less than 100 packet not to make reflood hell * Cleanup * PacketHistory max no less than 100 * no less than 100 means max of 100 or a given value of course. * Care to not do duplicate entries. Cleanups. * Packet History - option to log aging of entries * Update comments for PACKET_HISTORY_TRACE_AGING and VERBOSE_PACKET_HISTORY definitions --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-19 18:48:35 -05:00
Jeremiah K	56e67cb434	Fix position exchange throttling issue (#7079) ... * Fix position exchange throttling race condition Separate tracking of position broadcasts vs replies to fix exchange position functionality. Previously, allocReply() would refuse to send position replies if any position packet (broadcast or reply) was sent within the last 3 minutes. This caused the exchange position feature to fail when a device had recently sent a position broadcast. Changes: - Add lastSentReply member to track position reply timestamps separately - Update allocReply() to only throttle based on previous replies, not broadcasts - This allows position exchange to work even after recent position broadcasts The fix maintains the 3-minute throttling for replies to prevent spam while allowing legitimate position exchange functionality to work properly. * Remove unused lastSentToMesh variable Variable was no longer used after separating reply throttling logic.	2025-06-19 18:20:20 -05:00
Matt Smith	e9d5e36738	Replace blocking delay for wifi reconnect with non-blocking to keep button/display interactivity (#6983) ... * Update WiFiAPClient.cpp to replace blocking delay() with non-blocking * Update WiFiAPClient.cpp - fix extra endif * Update WiFiAPClient.cpp remove duplicate section * Update WiFiAPClient.cpp * Update trunk_annotate_pr.yml * Update trunk_annotate_pr.yml * Update trunk_check.yml * Update trunk_check.yml * Update trunk_format_pr.yml * Update trunk_annotate_pr.yml * Attempted to address comments, and fix my other mess. Thanks for your patience. * Revert "Update trunk_annotate_pr.yml" This reverts commit 7db4ff6444. * Last mess cleanups (hopefully) * Undid trunk.yaml changes * Trunk format --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-19 18:18:55 -05:00
Jonathan Bennett	f71fdef3fd	Update HostMetrics.cpp - don't try to print the user string (#7081) ... * Update HostMetrics.cpp - don't try to print the user string * Make Trunk Happy	2025-06-19 17:05:22 -05:00
Jonathan Bennett	5e92145324	Ensure incoming hostMetrics userstring is null terminated (#7068) ... * Ensure incoming hostMetrics userstring is null terminated * Only null terminate user_string when has_user_string is true	2025-06-18 16:41:43 -05:00
Marek Veselý	20991d8b53	Add recognition for SHT40 with serial number starting with 0xc8d (#7061) ... * Add recognition for SHT40 with serial number starting with 0xc8d * fix a dumb typo :/	2025-06-18 06:19:52 -05:00
Jonathan Bennett	3ab9005b2f	Make sure host_metrics user_string is null terminated	2025-06-17 11:11:36 -05:00
Marek	aabc5b7cf2	PacketHistory debloat RAM allocations (#7034) ... * PacketHistory debloat RAM allocations * Removed FLOOD_EXPIRE_TIME option. We have static buffer now. * Remove mx_ prefix from recentPackets * Remember no less than 100 packet not to make reflood hell * Cleanup * PacketHistory max no less than 100 * no less than 100 means max of 100 or a given value of course. * Care to not do duplicate entries. Cleanups. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-17 07:18:59 -05:00
Nivek-domo	1a6bb97f16	Fix RCWL9620Sensor for rak11310 support (#6617) ... * Update RCWL9620Sensor.cpp test on rak11310, work very wel now * Update RCWL9620Sensor.cpp * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-16 06:54:55 -05:00
todd-herbert	465fe18a89	Dismiss ExternalNotification nagging on InkHUD button press (#7056) ... * Expose ExternalNotification::isNagging * Dismiss external notification on button press	2025-06-16 06:09:55 -05:00
Andy Shinn	f1dd623ce9	allow overriding INA3221 channels (#7035) ... Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-06-15 07:39:49 -05:00
Ben Meadors	ac52edd11a	Add the ability to share ignored contacts (for blacklisting problematic nodes) (#7044)	2025-06-15 07:34:03 -05:00
github-actions[bot]	66d5dde956	[create-pull-request] automated change (#7043) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-06-15 06:45:00 -05:00
Jonathan Bennett	e623c70bd0	More clear key warning messages.	2025-06-14 19:35:57 -05:00
Jonathan Bennett	1557219bad	More low-entropy keys, and don't issue a false warning when changing … (#7041) ... * More low-entropy keys, and don't issue a false warning when changing node name * CopyPasta Wasn't Tasty * When the phone sets the publickey size to 0, regenerate right away	2025-06-14 17:09:22 -05:00
Csrutil	5d0bf03b01	add support for GAT562 Mesh Trial Tracker (#6984) ... * add support for GAT562 Mesh Trial Tracker * Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER * Added RAK4630 for led pin 2 (blue) * Added RAK4630 for led pin 2 (blue) comment * don't touch src/mesh/NodeDB.cpp * set fixed baudrate for gat562_mesh_trial_tracker * adjust the order of the HW_VENDOR defines --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-13 17:27:48 +10:00
Jonathan Bennett	8ff99437cb	Don't include the blank hash	2025-06-12 22:56:40 -05:00
todd-herbert	ba93097bb7	Add InkHUD driver for WeAct Studio 1.54" display module (#7000) ... * Strip redundant code from E-Ink driver * Begin polling for E-Ink update completion sooner In some cases, we might be waiting longer than we need to. * E-Ink driver for WeAct 1.54" display Currently identical to the popular GDEY0154D67 model. Kept separate now in case the drivers need to diverge in future. * Put back code which sets the number of gate lines	2025-06-12 19:59:28 -05:00
todd-herbert	de098cca4c	E-Ink driver for WEAct 2.13" BW (#7001)	2025-06-12 19:58:38 -05:00
Christian Crank	8faa04afdb	Validate short and long names so whitespace or empty names cannot be used (#6993) ... * Say issue #6867 about adding validation for long_name and short_name. Firmware should expect at least 1 non-whitespace character for both long_name and short_name. added the USERPREFS_CONFIG_DEVICE_ROLE example to userPrefs.jsonc * Validation for user long_name and short_name implemented. No longer can use whitespace characters. Return BAD_REQUEST error responses when validation fails and warning logs when validation rejects invalid names. * Improve whitespace validation for user names with ctype.h, ensure logging works * Add whitespace validation to ham mode to prevent validation bypass and to match python cli command * punctuation change --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-12 19:58:15 -05:00
Chloe Bethel	4e6418b635	Don't use assert() with side effects in a couple more places (#7009) ... * Don't use assert for Lock * Don't use assert for MQTT messages * Split assert in getMacAddr to always run the function --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-12 19:55:35 -05:00
Jonathan Bennett	a1a5503fe9	Another known key	2025-06-12 15:18:26 -05:00
Jonathan Bennett	3b94981e56	Key erase (#7018) ... * Wipe keys if low entropy * Client Notification Payload variant * Don't call service before it's created * Lucky Number 14 * Catch for low-entropy keys even before region is set	2025-06-12 12:13:39 -05:00
github-actions[bot]	5f0c8863fd	[create-pull-request] automated change (#7019) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-11 20:18:47 -05:00
Jonathan Bennett	e5f6804421	Add boolean to only warn a user of a duplicated key once per boot	2025-06-10 13:28:36 -05:00
github-actions[bot]	693b11db1d	[create-pull-request] automated change (#7007) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-06-10 06:47:41 -05:00
Jonathan Bennett	4bf2dd04ae	Warn users about low entropy keys (#7003) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-10 06:33:13 -05:00
Andreas 'count' Kotes	c6c2a4d4dd	Improve support for Heltec Wireless Bridge (#6647) ... * Use BLE_LED where present for CONNECTED/DISCONNECTED * Use WIFI_LED where present for WiFi started/stopped (as AP) or connected/disconnected (as Station) * improve support for Heltec Wireless Bridge * satisfy 'trunk fmt'	2025-06-10 13:54:07 +10:00
Clément Hampaï	1eacdd0629	[Variant] nomadstar meteor pro (#6742) ... * Initial support for NomadStar Meteor Pro * Cleaned up Platformio variant comments * Removed RTC & ETH deps. * Removed RGB NCP5623 deps, Enabled AmbientLight by default * Added HWID mapping * Updated Armduino-Semihosting lib dep with archived version. * Fixed trunk linting in AmbientLightingThread.h and hydra variant	2025-06-10 07:48:52 +10:00
HarukiToreda	3dec521f75	T-watch screen misalignment fix (#6996) ... * T-watch screen misalignment fix * Trunk fix	2025-06-09 05:27:52 -05:00
Christian Crank	b8970d66a1	Addition of Device Role inside of userPrefs.jsonc (#6972) ... * addition of device.role via userprefs. USERPREFS_CONFIG_DEVICE_ROLE now usable, ROUTER*, LOST_AND_FOUND, and REPEATER disabled. * Removing added IS_ONE_OF macro definition since meshUtils.h exists - thanks Ben! * Fix clang-format issues in NodeDB.cpp utilizing Trunk	2025-06-08 16:51:37 +10:00
github-actions[bot]	91579c4650	[create-pull-request] automated change (#6980) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-06-07 06:55:25 -05:00
Andrew Yong	79b710a108	fix: Respect LED_STATE_ON for power and user LED (#6976) ... Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-07 06:44:54 -05:00
todd-herbert	ba296db701	Add InkHUD driver for WeAct Studio 2.9" display module (#6963) ... * Driver for WeAct Studio 2.9" ePaper module * Clarify that flex connector marking is not a unique id --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-06 17:35:47 +12:00
Andrew Yong	070deb290f	seeed_xiao_nrf52840_kit improvements (#6930) ... * feat: seeed_xiao_nrf52840_kit improvements - LEDs: - Change RGB LED to be active low as it is common anode - Remove re-definition of LED_PIN - Use red LED to indicate flash writes - Use blue LED as user LED (External Notification module) - GPIO: Re-word unused BUTTON_PIN comment - Wire: Set I2C pins to match XIAO nRF52840 Sense's LSM6DS3TR IMU - Battery: - Use charge LED to detect charging state - Move voltage divider boilerplate out of src/main.cpp and into initVariant() - Fix dependencies for above in related XIAO BLE DIY variants Build tested variants: - seeed_xiao_nrf52840_kit - xiao_ble - seeed-xiao-nrf52840-wio-sx1262 Flashed to and tested on hardware: - seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(seeed_xiao_nrf52840_kit): Re-order generic GPIO definitions Signed-off-by: Andrew Yong <me@ndoo.sg> * chore: Use ADC_CTRL for XIAO nRF52840 Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-05 06:45:43 -05:00
Jonathan Bennett	55b2bbf937	Generate keys when Lora Region is set (#6951) ... * Generate keys when Lora Region changes * Nest the ifs * Even more entropy * Namespacing	2025-06-04 12:16:37 -05:00
Jonathan Bennett	5cd74f4b53	Don't give LOG_INFO a null	2025-06-01 21:03:38 -05:00
ArgoNavi	f9d4fdbb52	Update TSL2591Sensor.cpp (#6921) ... Lower gain and timing to avoid saturation in bright light	2025-05-30 06:00:20 -05:00
Ben Meadors	7a7166d575	Revert "Add a new screen for heltec_wireless_paper. (#6894)" (#6918) ... This reverts commit ba53543354.	2025-05-29 10:17:20 -05:00
Quency-D	ba53543354	Add a new screen for heltec_wireless_paper. (#6894) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:10:25 -05:00
dmarman	cb9429e83e	Added full support for LTR390UV readings of UV and Lux (#6872) ... * Added full support for LTR390UV readings of UV and Lux * Trunk formatting * Added full support for LTR390UV readings of UV and Lux * Trunk formatting * fix library check and unnecessary bit resolution change * fixed log info messages and removed unused dependency * Hopefully fixes git mess * fix variable scope and getMetrics returns * set metrics flags bavk to false in case something wrong happens while reading LTR390UV mode --------- Co-authored-by: Domingo <domingo@waxman.local> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:09:33 -05:00
dylanli	c0c2ec195f	add support for seeed wio tracker L1 (#6907) ... * add support for seeed wio tracker l1 * add support in nrf52 arch * fix ADC problem and comments incorrect * fix gps wakeup pin * fix gps pin	2025-05-29 06:33:22 -05:00
todd-herbert	5195815df0	Parse own short name in LogoApplet (#6913)	2025-05-29 06:21:09 -05:00
Ben Meadors	42a80d8aed	Coerce user.id to always be derive from the nodenum (#6906) ... * Coerce user.id to always be derive from the nodenum * Additionally null it out on send * Revert "Additionally null it out on send" This reverts commit 22a2d68723.	2025-05-28 11:30:59 -05:00
github-actions[bot]	da69d88790	[create-pull-request] automated change (#6909) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-28 06:20:51 -05:00
Thomas Göttgens	96c18d9908	Add LINK32 (Lilygo) Board with Light+Environment sensors (#6899) ... * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Update to real HWID and trunk fmt	2025-05-27 18:11:32 -05:00
GUVWAF	8908805894	Don't cancel sending ReTx for relayer if we're ROUTER(_LATE)/REPEATER (#6904) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-27 18:10:14 -05:00
github-actions[bot]	158c88ddef	[create-pull-request] automated change (#6905) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2025-05-27 15:41:35 -05:00
todd-herbert	f223b8a55d	Add missing parsing of UTF-8 chars (#6889)	2025-05-25 13:12:52 -05:00
Ben Meadors	75a49d3486	Add heap metrics to Local stats (#6887)	2025-05-25 11:08:56 -05:00
Michael Cullen	7d95b487ef	Add PCT2075 Temperature Sensor (#6829) ... This is an I2C temperature sensor. It is intended to be a drop-in compatible sensor for the LM75, however it is more accurate. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 07:29:02 -05:00
Ben Meadors	2e72850d99	Fix is_unmessagable plumbing (#6886)	2025-05-25 07:24:28 -05:00
github-actions[bot]	c47bdd11f9	[create-pull-request] automated change (#6885) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-25 06:56:21 -05:00
Andrew Yong	e29588d2e2	feat(RadioInterface): Tx power gain calculation rework (#6796) ... - Rename REGULATORY_GAIN_LORA to TX_GAIN_LORA - Move gain-based Tx power clamping from RadioInterface::applyModemConfig() to RadioInterface::limitPower() - User-configured Tx power now matches the Tx power out of the device connector - Re-order [LoRa Chip]Interface.cpp limitPower() to take place before the final Tx power clamping so we clamp based on the pre-PA Tx power rather than user-configured Tx power Tested on XIAO BLE variant. Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 06:26:31 -05:00
Chiho Sin	9b69c2a9af	graphics: Add GDEY0213B74 E-Ink display driver (#6879) ... Implement the GDEY0213B74 driver with configuration methods for scanning, waveform, update sequence, and polling for refresh completion. This driver supports both fast and full update types for the 2.13 inch E-Ink display. Signed-off-by: ChihoSin chihosin@icloud.com Signed-off-by: ChihoSin chihosin@icloud.com	2025-05-25 06:08:41 -05:00
Ben Meadors	beba1b4882	Added map report precision bounds (#6862) ... * Added map report precision bounds * Log warning * Precision range should be 12-15 * Missed commit * Update tests * That method was renamed * Removed now-defunct test call * Remove defunct test	2025-05-22 20:33:46 -05:00
todd-herbert	ba1ef45024	InkHUD Extended ASCII (#6768) ... * Custom AdafruitGFX fonts with extended ASCII encodings * AppletFont handles re-encoding of UTF-8 text * Manual parsing of text which may contain non-ASCII chars * Display emoji reactions, even when unprintable Important to indicate to users that a message has been received, even if meaning is unclear. * Superstitious shrink_to_fit I don't think these help, but they're not hurting! * Use Windows-1252 fonts by default * Spelling * Tidy up nicheGraphics.h * Documentation * Fix inverted logic Slipped in during a last minute renaming while tidying up to push..	2025-05-22 18:16:53 -05:00
Ben Meadors	7cd50d7044	If a contact is add from a QR, it's "verified" manually (#6858) ... * If a contact is add from a QR, it's "verified" manually * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-22 07:40:36 -05:00
Jonathan Bennett	41c1b29d70	Add basic handling for is_manually_validated (#6856)	2025-05-20 21:29:29 -05:00
Ben Meadors	6041357cbb	Increase the debt ceiling	2025-05-20 20:31:01 -05:00
github-actions[bot]	cf3f35d566	[create-pull-request] automated change (#6857) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-20 19:51:03 -05:00
Jonathan Bennett	e0f878872f	Hostmetrics user string (#6850)	2025-05-20 13:04:05 -05:00
HarukiToreda	16994c8725	Fix for ICM-20948 not initializing (#6827) ... * Fix for ICM-20948 not initializing * trunk fix	2025-05-19 06:49:38 -05:00
Jonathan Bennett	61e4eb12e6	Use the _init_zero macro correctly for HostMetrics (#6837)	2025-05-17 14:02:39 -05:00
github-actions[bot]	5b312ab917	[create-pull-request] automated change (#6836) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2025-05-17 12:29:18 -05:00
github-actions[bot]	a50a94150a	[create-pull-request] automated change (#6834) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2025-05-17 10:44:02 -05:00
Jonathan Bennett	066609a718	Remove incomplete compass boot calibration (#6825) ... The made it in from testing unintentionally.	2025-05-16 12:29:08 +10:00
Jonathan Bennett	1ef4caea05	Host metrics (#6817) ... * Add std::string exec() function to PortduinoGlue for future work * MVP for HostMetrics module. * Fix compilation for other targets * Remove extra debug calls * Big numbers don't do well as INTs. * Add HostMetrics to config.yaml	2025-05-15 09:23:37 -05:00
Austin	7d8f9c7f6d	Stop the madness! Run as a user (not root) (#6718) ... * Stop the madness! Run as a user (not root) * Trigger fsdir migration for < 2.6.9 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-15 06:40:46 -05:00
Tom Fifield	6bba17d463	Add suppport for Quectel L80 (#6803) ... * Add suppport for Quectel L80 Another PMTK family chip, requires only a modification to the probe code. * Update support for L80 based on testing.	2025-05-15 19:26:41 +10:00
github-actions[bot]	ed6de5095e	[create-pull-request] automated change (#6815) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-14 17:54:21 -05:00
Ben Meadors	7cffd9ba70	Added new map report opt-in for compliance and limit map report (and default) to one hour (#6813) ... * Added new map report opt-in for compliance and limit map report (and default) to one hour * Trunk	2025-05-14 15:31:28 -05:00
Ben Meadors	fc64bea698	Unmessagable implementation and defaults (#6811) ... * Unmessagable implementation and defaults * Router and router late are unmessagable by default * Update src/modules/AdminModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 15:28:09 -05:00
github-actions[bot]	a51a6b8c47	[create-pull-request] automated change (#6812) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-14 14:41:37 -05:00
github-actions[bot]	bc313da064	[create-pull-request] automated change (#6810) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-14 13:48:14 -05:00
Austin	f16402dec1	MQTT userprefs (#6802)	2025-05-14 13:39:46 -05:00
todd-herbert	feafd2bc0c	Protect T-Echo's touch button against phantom presses in OLED UI (#6735) ... * Guard T-Echo touch button during LoRa TX * Guard for T-Echo only --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-14 06:33:51 -05:00
Ben Meadors	94af3bd1ab	Formatting	2025-05-14 06:31:18 -05:00
Richard Zhang	d9ad2322e8	Fixes BUG #6243 Heltec Tracker (#6781) ... * fix wireless tracker screen issues * fix SHTC3 BUG * Remove the 32K crystal oscillator option for the Wireless Paper and Vision Master series. * Correct spelling errors * Update src/graphics/Screen.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 06:29:05 -05:00
Ben Meadors	0a8bd1e4be	Add contact admin message (for QR code) (#6806)	2025-05-14 05:33:51 -05:00
Thomas Göttgens	cc66f7c79b	Crowpanel 4.3, 5.0, 7.0 support (#6611) ... * SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-05-13 14:15:52 +02:00
github-actions[bot]	e1417cff2e	[create-pull-request] automated change (#6804) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-13 06:59:26 -05:00
Ben Meadors	b9fcd9da23	Add some no-nonsense coercion for self-reporting node values (#6793) ... * Add some no-nonsense coercion for self-reporting node values * Update src/mesh/PhoneAPI.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-11 18:08:29 -05:00
Ben Meadors	2a06b058fd	Only send nodes on want_config of 69421 (#6792)	2025-05-11 15:18:53 -05:00
Tom	62e1974d09	Add clarifying note about AHT20 also being included with AHT10 library (#6787) ... * Update AHT10.h Add clarifying note about AHT20 also being included * Update AHT10.cpp Add clarifying note about AHT20 also being included	2025-05-11 17:17:37 +08:00
Ben Meadors	981ecfdb61	Add client notification before role based power saving (sleep) (#6759) ... * Add client notification before role based power saving (sleep) * Unsigned	2025-05-07 21:20:32 -05:00
Jonathan Bennett	3a6fc668d8	20948 compass support (#6707) ... * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Switch to Meshtastic ICM-20948 lib for Portduino support * Use 20948 for compass direction * Compass is more than just RAK4631 * Cleanup for 20948 compass * use Meshtastic branch of 20948 lib * Check for HAS_SCREEN for showing calibration screen * No accelerometerThread on STM32	2025-05-07 18:38:42 -05:00
Ben Meadors	6f256c06f6	Fix warning	2025-05-07 09:26:10 -05:00
Austin	62421a83fd	Fix EVENT_MODE on mqttless targets (#6750)	2025-05-06 13:12:25 -04:00
github-actions[bot]	d75c91a760	[create-pull-request] automated change (#6732) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-04 08:39:59 -05:00
Austin	152b8b1b02	Revert "router: on linux add a mutex around the queue (#6709)" (#6726) ... This reverts commit 987623567a.	2025-05-02 13:53:25 -04:00
todd-herbert	10693c4569	Lock SPI bus while in use by InkHUD (#6719) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-02 06:20:56 -05:00
Ferdia McKeogh	947191a797	Add PA1010D GPS support (#6691)	2025-05-02 10:11:09 +08:00
Jorropo	987623567a	router: on linux add a mutex around the queue (#6709) ... UDP reception happens on an other thread, avoid data races and potential data corruption issues.	2025-05-01 06:32:20 -05:00
Manuel	a8ab6e82e6	MUI framebuffer support (#6703) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 20:50:30 -05:00
todd-herbert	5c005aaed5	Restore InkHUD to defaults on factory reset (#6637) ... * Erase InkHUD settings on factory reset * Documentation * Captialn't Lower case m. Also move the include statement to .cpp, because it doesn't really need to be in the .h	2025-05-01 12:28:05 +12:00
Jonathan Bennett	845088e45b	Add 100 msecond delay in tft_task_handler when deviceScreen is null (#6695) ... * Add 100 msecond delay in tft_task_handler when deviceScreen is null, to fix 100% usage bug * move portduino tft task creation into tftSetup * remove superfluous check * update platform-native commit --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-30 06:17:24 -05:00