967 Commits

Author	SHA1	Message	Date
Chloe Bethel	0bd4cefad3	Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797) ... * Show ExternalNotification as excluded if it is * Enable ExternalNotification, SerialModule and RangeTest on STM32WL * Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin * Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1) * Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.	2025-09-02 07:09:15 -05:00
Ben Meadors	4e03df5ea7	Fix freetext hang (#7781) ... * Fixed freetext hangs by adding canned modules back to self-sourced packets and transition to SENDING_ACTIVE state * Update meshmodule handling	2025-08-29 12:09:22 -05:00
Tom Fifield	b0e8321514	Only send Neighbours if we have some to send. (#7493) ... * Only send Neighbours if we have some to send. The original intent of NeighborInfo was that when a NeighbourInfo was sent all of the nodes that saw it would reply with NeighbourInfo. So, NeighbourInfo was sent even if there were no hop-zero nodes in the NodeDB. Since 2023, when this was implemented, our understanding of running city-wide meshes has improved substantially. We have taken steps to reduce the impact of NeighborInfo over LoRa. This change aligns with those ideas: we will now only send NeighborInfo if we have some neighbors to contribute. The impact of this change is that a node must first see another directly connected node in another packet type before NeighborInfo is sent. This means that a node with no neighbors is no longer able to trigger other nodes to broadcast NeighborInfo. It will, however, receive the regular periodic broadcast of NeighborInfo, and will be able to send NeighborInfo if it has at least 1 neighbor. * Include all the things * AvOid memleak	2025-08-28 18:45:46 -05:00
Ben Meadors	834c3c5cc2	Add this back in	2025-08-27 16:24:57 -05:00
Ben Meadors	0903ed8232	Mesh solar integrate (#7764) ... * Added HELTEC MeshSolar board. (#7499) * Added HELTEC MeshSolar board. * Set emergency shutdown pin as high impedance * Set emergency shutdown pin as high impedance Set emergency shutdown pin as high impedance * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update I2C SCL pin definition in variant.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Updates --------- Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-27 06:02:54 -05:00
Ben Meadors	3dd384dd53	Null check	2025-08-26 19:45:26 -05:00
Manuel	3f5c30e3b3	T-Lora Pager (#7613) ... * initial commit * preset rotary1 encoder * define TAB+ESC * haptic feedback * allow switch off haptic feedback * enable audio amplifier * include PR4684 * fix for tft target * add ES8311 audio codec * fix KB scan duplicate * display workaround to avoid debris * fix debris on display * keyboard backlight * enable screen options * fsm based bounce-free rotary encoder implementation * use fsm RotaryEncoder only for T-Lora Pager * change inputbroker default config to allow using rotary wheel for screens AND menues --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 09:35:25 -05:00
Jonathan Bennett	915f882e1f	Pkc fix (#7722)	2025-08-24 10:13:18 -05:00
Ben Meadors	8b42bf7a95	Don't reboot when setting lora config with portduino sim radio (#7716)	2025-08-23 05:47:51 -05:00
Ben Meadors	1daf5aad1f	Revert "Add on-screen keyboard implementation on Trackball device. (#7625)" (#7704) ... This reverts commit fe3f14a63e.	2025-08-21 06:29:23 -05:00
Wilson	fe3f14a63e	Add on-screen keyboard implementation on Trackball device. (#7625) ... * Add on-screen keyboard implementation on Wio Tracker L1. * Update On-Screen Keyboard to new layout. * The on-screen keyboard dynamically adjusts the key size based on the screen. * Improve input box display on small screens. * Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens. * Optimize the text alignment of numeric keys on ssd1306. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-21 18:01:31 +08:00
Thomas Göttgens	9feb1d378e	Support for T-Echo Lite, credits to @Szetya for doing all the heavy lifting! (#7636) ... * Support for T-Echo Lite, credts to @Szetya for doing all the heavy lifting! * move define to ini file	2025-08-17 13:37:12 +02:00
Ben Meadors	c8694f9f2d	Fix Tracerouter warnings (#7637) ... * Static cast to avoid signed comparison * Another one	2025-08-15 07:03:14 -05:00
Ford Jones	1877a2c531	Prompt user to select destination upon launch of canned message module (#7624) ... Co-authored-by: Jason P <applewiz@mac.com>	2025-08-15 05:31:11 -05:00
Jonathan Bennett	ddd149945a	More spoof remediation (#7612) ... * More spoof remediation * Fix signed comparison error * Only fire self-bound messages into the routing module * Update src/mesh/MeshModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * String const --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-08-12 16:08:03 -05:00
Ben Meadors	db238ef524	Log when this happened	2025-08-11 19:49:35 -05:00
Jonathan Bennett	f2b935f48f	Stop the bleeding with malicious NodeDB overwrites (#7596)	2025-08-11 15:52:28 -05:00
Jonathan Bennett	691327b2db	Initial support for the ThinkNode M5 (#7502) ... * Initial support for the ThinkNode M5 * Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Cleanup variant.h for Elecrow Thinknode M5 * Properly detect battery voltage * Turn backlight off when screen sleeps --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-08-07 06:28:15 -05:00
oscgonfer	a23c58c10a	Avoid acquiring lock twice (#7555) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-06 06:38:36 -05:00
Jonathan Bennett	27c6b24e3a	Rather than mysteriously rebooting, regenerate the keys and infrom the user. (#7558)	2025-08-05 19:53:25 -05:00
mrab	384436e937	fix: ina226 was not calibrated during init (#7547) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-05 06:34:52 -05:00
Jacob Powers	3b6eefa8bb	feat: event mode - limit smart position updates to at most every 5m (#7505) ... * feat: event mode - limit smart position updates to at most every 5m * fix: convert 600 to 600000ms for 5min threshold * fix: correct 5min threshold to 300000ms --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-31 21:45:34 -05:00
HarukiToreda	5107531425	Remember destination fix (#7427) ... * T-watch screen misalignment fix * Trunk fix * Rember Last Receipient Node or channel When a new freetext or preset message is sent and a destination is selected, the next message would forget the previously selected destination and would need to be selected again. With this fix it will remember the last destination selected until changed again. * Fix for reply function to remember last messaged * trunk check --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-31 07:36:03 -05:00
Ben Meadors	88655ffc44	Move BLE toggle menu option and add confirmation for canned messages in L1 (#7516) ... * Move bluetooth to system menu and add confirmation for canned messages * Cruft * Handle else * Warn * Fixed screen reset	2025-07-31 07:34:41 -05:00
Chloe Bethel	b5a8e8f51b	DEBUG_MUTE correctness (#7492) ... * treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE * stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-29 08:51:38 +10:00
mikecarper	aa3b14ce72	bugfix Add rssi and snr to the store and forward code. (#7462) ... * Update StoreForwardModule.cpp * Update StoreForwardModule.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-27 20:03:01 -05:00
Ben Meadors	28aeb0f09e	Validate Serial config console override modes (#7470) ... * Validate serial config console override modes * Update src/modules/SerialModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Disable * Guard serial module * Guards --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-07-26 19:55:54 -05:00
Tom Fifield	df8b629c2c	Clear position on GPS deactivation, unless using fixed position (#7464) ... * Clear position on GPS deactivation, unless using fixed position As reported by @dreimal8 , and confirmed by @tuxmobil , when using and then subsequently disabling GPS the last position retrieved from the GPS was stored and continued to be broadcast. This change introduces a check to see if we are transitioning from GPS Enabled to GPS Disabled or Not Present. If we are, and fixed position is not in use, then we clear the local position. This will prevent inaccurate and undesired position broadcasts for those who disable their GPS. Fixes https://github.com/meshtastic/firmware/issues/7228 * Update triple click to also clear position --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-26 08:09:26 -05:00
Ben Meadors	a506dc6b65	Fix MQTT config bugs (#7446) ... * Fix mqtt config bugs * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add client notification * Verbiage * Update src/mqtt/MQTT.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mqtt/MQTT.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mqtt/MQTT.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mqtt/MQTT.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove test that is no longer true * This test no longer exists * Fix client notification crap * Suppress false positive * Revert "Suppress false positive" This reverts commit bead96eaee. * Try macro exclusion * Derp * Fix --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Jason P <applewiz@mac.com>	2025-07-26 05:38:24 -05:00
Wilson	7a4a915312	Add Trace Route on BaseUI (#7386) ... * Add TraceRoute function to menus and modules to support node path tracing * Adjust text spacing and line wrapping logic in trace route result result. * Add HAS_SCREEN for TraceRouteModule drawFrame. --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-24 17:23:45 -05:00
Jonathan Bennett	82ddf4732a	Deprecate disable_triple_click config (#7425)	2025-07-23 05:57:17 -05:00
Jonathan Bennett	fff12979a2	Set canned_message.enabled to true when setting defaults (#7414) ... * Set canned_message.enabled to true when setting defaults * Re-split canned messages on update	2025-07-21 19:31:07 -05:00
whywilson	29449a71d4	When outputting RTTTL ringtones, you can still hear a periodic buzzing sound. This problem is fixed in this commit.	2025-07-21 14:44:41 -05:00
Jonathan Bennett	36b94cf823	Unify the shutdown proceedure (#7393) ... * Unify the shutdown proceedure * Don't double save nodeDB on shutdown * Re-tool button shutdown to better correspond to tones * Beep then save --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-20 18:53:40 -05:00
Jonathan Bennett	91049d0db3	Misc cppcheck fixes (#7370)	2025-07-20 06:19:45 -05:00
Jason P	71b6508ad3	BaseUI Updates (#7358) ... * Calculate the length of the right string and use it * Improve readability of Version Number * Prevent negative message IDs and proactively favorite DM'd nodes * Patch up Remove Favorite functionality * Fix warnings for TFT_MESH_* and hasSupportBrightness * Fix warning around casting variables * Correct Favorite Node Behavior to rebuild favorite nodes when updated. * Resolve bool kb_found issue not working for second discovery keyboards --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-07-16 19:44:23 -05:00
Jonathan Bennett	c3b2b474c6	Drop NodeInfo packets if the is_licensed bit doesn't match owner (#7361)	2025-07-16 16:05:34 -05:00
Chloe Bethel	1be4fc5ae9	GPS for STM32WL (#7297) ... * Enable GPS for Wio-E5 variant on Serial2 * Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it. * Don't try to send ATAK packets if ATAK is disabled, +4k flash	2025-07-14 05:12:26 -05:00
TSAO	2ecbf704d0	Improve OLED UI Responsiveness and Force Redraws for Canned message module (#7324) ... * No delay between UI frame rendering for OLED * force redraw the display --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com>	2025-07-13 08:28:05 -05:00
Austin	86be2ac12f	userPrefs: Set default ringtone nag time (#7314)	2025-07-12 16:26:25 -05:00
Jonathan Bennett	cb47325f08	Seesaw Rotary (#7310) ... * Initial add of Adafruit seesaw encoder * Fully wire up seesaw * Trunk * Add #include configuration.h back to unbreak logging * Tryfix the dumb compilation error --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-12 12:36:44 -05:00
Ben Meadors	9798a91e7b	Delete ringtone.proto file for factory reset (#7303)	2025-07-11 08:22:50 -05:00
Austin	e9a551ae90	Load ringtone from userPrefs (#7298) ... * Load ringtone from userPrefs * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-07-11 08:09:46 -05:00
Jonathan Bennett	4bab148e3b	Make the shouldWake function always available, and remove the bool (#7300)	2025-07-10 22:51:43 -05:00
Jason P	be75f11156	Update Screen Wake Default Behavior (#7282) ... * feat(display): enable screen wake on received messages * feat(menu): add Screen Wakeup option in system menu * feat(ui): update wake on message configuration and refactor save logic * feat(TextMessageModule): conditionally trigger screen wake on received message * Refactoring system menu options for notification and screen. * Fix MUI options in the system menu. * Build out Reboot/Shutdown Menu and consolidate options within it * Trunk fixes * Protobuf ref * Revert generated files * Update plumbing for screen_wakeup_menu * Begin work on crafting a method to stop screen wake for received messages * SharedUIDisplay.cpp doesn't need ExternalNotificationModule.h * Stop screen wake if External Notification is enabled * Removing extra log lines * Add role and battery state checks for not waking screen. Menu updates to resolve some Back options not being linked * Resolve some additional merge conflict related issues * Shouldn't throttle the power menu * Finalize renames of some menus * Flip Flop MUI Menu to avoid accidental clicks * NULL check for powerStatus * Remove "Wakeup" eNum * Update src/graphics/Screen.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * CoPilot was close this should fix the builds --------- Co-authored-by: whywilson <m.tools@qq.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-07-10 19:49:15 -05:00
Jonathan Bennett	6030bf50e0	Unbreak the macro	2025-07-10 11:40:02 -05:00
Jonathan Bennett	5f5698ccc0	Explicitly include meshUtils.h	2025-07-10 10:29:33 -05:00
Jonathan Bennett	74c735d5fb	Gate screen code behind IF_SCREEN()	2025-07-10 10:20:44 -05:00
Jonathan Bennett	107dec22bd	Remove bogus validation check	2025-07-10 10:12:02 -05:00
Jonathan Bennett	0795b21c2b	Key verification flow on BaseUI (#7240)	2025-07-10 09:45:36 -05:00