mirror of
https://github.com/meshtastic/firmware.git
synced 2025-09-10 21:19:07 +00:00
0dda175d97
11 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jonathan Bennett
|
473ef1bc03
|
Step one of Linux Sensor support (#6673)
* First addition of __has_include for sensor support * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Make TelemetrySensor::setup() a pure virtual finction * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Enable HAS_SENSOR for Portduino * Move back to Adafruit BusIO after patch |
||
|
nebman
|
80fc0f2bda
|
Detect charging status by measuring current flow with configured INA battery sensor (#5271)
Some checks are pending
CI / setup (stm32) (push) Waiting to run
CI / check (push) Blocked by required conditions
CI / build-esp32 (push) Blocked by required conditions
CI / build-esp32-s3 (push) Blocked by required conditions
CI / build-esp32-c3 (push) Blocked by required conditions
CI / build-esp32-c6 (push) Blocked by required conditions
CI / build-nrf52 (push) Blocked by required conditions
CI / build-rpi2040 (push) Blocked by required conditions
CI / build-stm32 (push) Blocked by required conditions
CI / package-raspbian (push) Waiting to run
CI / package-raspbian-armv7l (push) Waiting to run
CI / package-native (push) Waiting to run
CI / build-docker (push) Waiting to run
CI / after-checks (push) Blocked by required conditions
CI / gather-artifacts (esp32) (push) Blocked by required conditions
CI / gather-artifacts (esp32c3) (push) Blocked by required conditions
CI / gather-artifacts (esp32c6) (push) Blocked by required conditions
CI / gather-artifacts (esp32s3) (push) Blocked by required conditions
CI / gather-artifacts (nrf52840) (push) Blocked by required conditions
CI / gather-artifacts (rp2040) (push) Blocked by required conditions
CI / gather-artifacts (stm32) (push) Blocked by required conditions
CI / release-artifacts (push) Blocked by required conditions
CI / release-firmware (esp32) (push) Blocked by required conditions
CI / release-firmware (esp32c3) (push) Blocked by required conditions
CI / release-firmware (esp32c6) (push) Blocked by required conditions
CI / release-firmware (esp32s3) (push) Blocked by required conditions
CI / release-firmware (nrf52840) (push) Blocked by required conditions
CI / release-firmware (rp2040) (push) Blocked by required conditions
CI / release-firmware (stm32) (push) Blocked by required conditions
Flawfinder Scan / Flawfinder (push) Waiting to run
* INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * INA219 charging detection minimal implementation: if there is a configured INA219 sensor for battery monitoring we can take the current flow across the shunt resistor to know if we are charging the battery - negative milliamps indicate charging * Update Power.cpp added comments and 2 extra defines to disable and swap detection direction * Update Power.cpp fix disabled case * move getCurrentMa() to new CurrentSensor class * add INA3221 charging detection * RP2040: Update core; add mDNS support (#5355) * Update arduino-pico core * RP2040: Add mDNS support * SimpleMDNS `begin` now returns a bool * Add `-g` option to `debug_build_flags` to link files for gdb * RAK11310 needs old platform as well * Change defines to specific architecture * Core version 4.2.1 is out * Add sudo to apt-get commands for Raspbian Build (#5364) Without sudo, inadequate permissions to runs the commands meant the build was failing. * Typo fix in build_raspbian.yml (#5365) s/sudp/sudo :(:(:( * Rework some things * Trunk * Separate littlefs bundle * version tags * Diag * Add littlefswebui * Bug fixed in ExternalNotificationModule (#5375) While `nagging` setExternalState wasn't written to Buzzer & Vibra so output was never toggled. Possible fix for #5348 * Cleanup static files from bad Web UI bundle on 2.5.13 release (#5376) * Cleanup static files from bad Web UI bundle on 2.5.13 release * Check existence first * Esp32 is the only one we care about * Move some actions to after `startTransmit()` (#5383) To minimize the time between channel scan and actual transmit * [create-pull-request] automated change (#5380) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Allows all 3 PKI keys to be added to userPrefs.h (#4969) and a tool. (#5368) * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * more userPrefs.h Added PKI Admin keys to userPrefs.h * Update userPrefs.h Allows all 3 PKI keys to be added to userPrefs.h (#4969) * Update NodeDB.cpp Trunk * Update userPrefs.h Changed wording * Create base64_to_hex.py A little tool for converting base64 PKI Keys to decoded byte that userPrefs.h can understand. * [create-pull-request] automated change (#5388) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * add smiley emoji (#5391) * add smiley emoji * clang-formatted * Anable trace route function on wismeshtap platform (#5389) * fix 'symbal' typo (#5395) * [create-pull-request] automated change (#5399) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * /api/v1/fromradio: add OPTIONS handler for CORS. (#5386) This avoids hitting the 404 Not Found handler, which breaks connection keep-alive, so this change fixes a big performance regression for Web Client in Chrome: https://github.com/meshtastic/firmware/issues/5385 Tested on Heltec V3. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Make heart emoji usable (#5403) * Create a specific hw_model for WisMesh Tap (#5400) * Create a specific hw_model for WisMesh Tap * Trunk * HAS_ETHERNET * Remove it altogether * Don't need these either * Fix RTC time injection and consolidate position logic (#5396) * Fix RTC time injection and consolidate position logic * Comment out unused var warning * Backerds * Update arduino-pico core to fix sporadic hangs (#5406) * Update platform-raspberrypi also (#5407) * Update arduino-pico core to fix sporadic hangs * Update platform-raspberrypi also * --web added to device-install(.sh/.bat) (#5405) * Add --web * Update device-install.bat Forgot a "-" a few places. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * add GPS in indicator board (#5411) * Fixed NMEA sentence issue in CalTopo as well as bug with no printing all of the nodes (#5412) * --web littlefswebui-* typo fix (#5416) * Add --web * Update device-install.bat Forgot a "-" a few places. * Typo fix. * Typo fix --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> * Temporarily disable MDNS when MQTT is enabled (#5418) Leads to a panic * Check for OkToMqtt flag presence before uplinking to MQTT (#5413) * Check for oktomqtt flag presence before uplinking to MQTT * Move to mqtt->onSend * Temetry can respond to want-response for LocalStats variant (#5414) * Seems like the last DIY board that's not "extra" (#5420) * Cherry pick tdeck fixes (#5422) * Try-fix (workaround) T-Deck audio crash * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * dreamcatcher: assign GPIO44 to audio mclk --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> * add canned message and keyboard in indicator board (#5410) * add canned message and keyboard in indicator board * Added virtual keyboard macro and enabled for Indicator * Cleanup macros by applying USE_VIRTUAL_KEYBOARD and DISPLAY_CLOCK_FRAME --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update build-native.sh (#5415) * Update build-native.sh Device-install.sh and device-update.sh are not used on native platform, skip copying to release directory after build and copy native-install.sh and native-run.sh instead. * Update build-native.sh Skip native-run.sh copy * Cleans up visibility in GPS.h (#5426) Signed-off-by: Christopher Hoover <ch@murgatroid.com> * Fix admin key loading from userPrefs.h (#5417) * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. * Remove log spam when reading INA voltage sensor. * Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots. * Removed newlines from log. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> * try to detect dfrobot station to tell it apart from an ublox gps. (#5393) * Remove BMA-423 and STK8X by default (#5429) * Remove BMA-423 by default * STK * Wrong macro * Helps if you include the file * [create-pull-request] automated change (#5431) Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com> * Support for the ClimateGuard RadSens Geiger-Muller tube (#5425) * fixes https://github.com/meshtastic/firmware/issues/5434 (#5435) * update libpax * fix interval init * Fix memory leaks by adding missing `free()` calls before early returns in `MQTT::onReceive` (#5439) This fix addresses memory leaks in the `MQTT::onReceive` function by ensuring that dynamically allocated resources (`e.channel_id`, `e.gateway_id` and `e.packet`) are properly freed before each early return. Previously, these resources were only freed at the end of the function, leaving them unhandled in certain exit paths. Adding the missing `free()` calls prevents memory leaks and ensures proper resource cleanup in all scenarios. * Removing 1.0 legacy boards from releases and completely removing Heltec wireless capsule from support (#5436) Co-authored-by: Tom Fifield <tom@tomfifield.net> * A second round of cleanup on GPS.h. (#5433) * Move yet more stuff out of GPS.h and into file scope. * Protect code macros from eating semicolons. * Remove unused (and unimplemented) getDOPString. * clang-format with project style file on affected files. Signed-off-by: Christopher Hoover <ch@murgatroid.com> * enable MQTT with TLS on RPi picow (#5442) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Don't powersave on Wifi (#5443) * Don't go into light sleep with wifi enabled * Move * Trunk * Revert "Seems like the last DIY board that's not "extra" (#5420)" (#5446) This reverts commit |
||
|
Thomas Göttgens
|
05e4a639a1
|
remove newline from logging statements. (#5022)
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben Meadors
|
e61bd84116
|
Send local stats telemetry to phone every 15 minutes (#4475)
* Send local stats telemetry to phone every 10 minutes * Add debug log and bump to 15 minutes * Tronk * Explicit has_ optional |
||
|
Warren Guy
|
974fc31856
|
INA3221 sensor: use for bus voltage & environment metrics (#4215)
* use INA3221 for bus voltage; fixes for telemetry variants - add to sensors available for environment telemetry (to report voltage/current) - add vars to define channels to use for battery voltage (for getBusVoltage) and environment metrics (default to CH1 for both) - write to the correct fields on the measurement struct depending on the measurement variant, and DRY up the sensor measurement collection code a bit - this might be suitable for a common implementation for the INA* sensors in a future PR... * formatting * derp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Warren Guy
|
23ac6b6514
|
fix INA3221 sensor (#4168)
- pass wire to begin() - remove redundant setAddr() (already set in header) |
||
|
Thomas Göttgens
|
827dcfca4a | trunk fmt | ||
|
Oliver Seiler
|
077ca5919a | MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR refinements | ||
|
Oliver Seiler
|
be0e882be1 | exclude sensors when MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR set | ||
|
Ric In New Mexico
|
9d4af1146e
|
INA3221 bugfixes & refinement (#2944)
Reorganized and refactored some INA3221 code Added comments Added missing shunt resistor value (100mΩ) Added INA3221 Channel 1 to getINAVoltage() for device battery monitoring modified: src/Power.cpp modified: src/modules/Telemetry/PowerTelemetry.cpp modified: src/modules/Telemetry/Sensor/INA3221Sensor.cpp modified: src/modules/Telemetry/Sensor/INA3221Sensor.h modified: src/power.h |
||
|
Ric In New Mexico
|
f57020412e
|
INA3221 / Power Telemetry Payload Variant Implementation (#2916)
* INA3221 / Power Telemetry Variant Implementation modified: platformio.ini modified: src/configuration.h modified: src/detect/ScanI2C.h modified: src/detect/ScanI2CTwoWire.cpp modified: src/main.cpp modified: src/modules/Modules.cpp new file: src/modules/Telemetry/PowerTelemetry.cpp new file: src/modules/Telemetry/PowerTelemetry.h new file: src/modules/Telemetry/Sensor/INA3221Sensor.cpp new file: src/modules/Telemetry/Sensor/INA3221Sensor.h modified: src/mqtt/MQTT.cpp * ifdef for portduino / linux native modified: src/modules/Telemetry/PowerTelemetry.cpp * try #2 modified: src/modules/Modules.cpp modified: src/modules/Telemetry/PowerTelemetry.cpp deleted: variants/xiao_ble/1.0.0/libraries/SPI/SPI.cpp * try #3 modified: src/modules/Modules.cpp * try #4 modified: src/modules/Telemetry/PowerTelemetry.cpp * try #5? modified: src/modules/Telemetry/PowerTelemetry.cpp * try #6 modified: src/modules/Telemetry/PowerTelemetry.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |