5314 Commits

Author	SHA1	Message	Date
Jonathan Bennett	845088e45b	Add 100 msecond delay in tft_task_handler when deviceScreen is null (#6695) ... * Add 100 msecond delay in tft_task_handler when deviceScreen is null, to fix 100% usage bug * move portduino tft task creation into tftSetup * remove superfluous check * update platform-native commit --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-30 06:17:24 -05:00
Ben Meadors	e0b1fdb5e8	Rate limit waypoints and alerts and increase to allow every 10 seconds instead of 5 (#6699) ... * Rate limit waypoints and alerts and increase to allow every 10 seconds instead of 5. * Update src/mesh/PhoneAPI.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Doot --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-04-30 06:08:10 -05:00
Jorropo	a7ef9e9c08	udp-multicast: remove the thread from the multicast thread API (#6685) ... * udp-multicast: remove the thread from the multicast thread API The whole API is parallel & asynchronous we don't need to start a thread ourself, the implementation probably does when we call start listening already. * Take copilot advice and call it a handler --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 05:52:42 -05:00
Colin	72eae42b81	PMSA003I: add support for driving SET pin low while not actively taking a telemetry reading (#6569) ... * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * RAK4631: add PMSA003I_ENABLE_PIN define * fix indentation --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-29 06:31:01 -05:00
Jonathan Bennett	473ef1bc03	Step one of Linux Sensor support (#6673) ... * First addition of __has_include for sensor support * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Make TelemetrySensor::setup() a pure virtual finction * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Enable HAS_SENSOR for Portduino * Move back to Adafruit BusIO after patch	2025-04-28 18:35:13 -05:00
GUVWAF	b1e35cd8b3	Fix preamble detected IRQ flag (#6653)	2025-04-22 14:21:29 -05:00
todd-herbert	70ced735d9	Correct a typing error in InkHUD display driver (#6651) ... * Fix LCMEN2R13EFC1 LUT A typing error when the driver was initially created. * Spelling..	2025-04-22 06:25:53 -05:00
Austin	8812eadd44	Revert "Add IP Address Frame (#6615)" (#6639) ... This reverts commit 5d48d2c0a7.	2025-04-20 09:49:21 -05:00
Ben Meadors	48dc0e014c	Revert "Lib Update (#6510)" (#6640) ... This reverts commit e2f6600cb9.	2025-04-20 09:48:07 -05:00
Nivek-domo	5d48d2c0a7	Add IP Address Frame (#6615) ... * Update Screen.cpp add ip on screen if has ethernet pcb like w5500 spi * Run Trunk Format and Translate Comments FR->EN --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-04-20 20:06:39 +10:00
Nivek-domo	2b57ffafd7	Rak13800 Ethernet works on rak11310 too ... we can use rak13800 on rak11310 too	2025-04-20 18:51:01 +10:00
todd-herbert	74b3dc34e4	Fix crash when clearing NRF52 BLE bonds (#6609) ... * Fix crash before clearing BLE bonds * Prevent clients re-pairing BLE during factory reset Clients seem able to re-pair BLE after clearing bonds during factory reset, even after advertising disabled. This seems to primarily occur on Android devices, which seem to more actively maintain the BLE connection. As a workaround, `NRF52Bluetooth::shutdown` swaps the BLE pairing callback to one which actively rejects new connections. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-17 17:11:42 -05:00
Thomas Göttgens	e2f6600cb9	Lib Update (#6510) ... * Lib Update Draft because PIN display doesn't work yet. * pin entry still no worky * Fix for missing PIN code issue (#6574) --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Alexander Begoon <alex@begoonlab.tech>	2025-04-17 15:58:28 -05:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
github-actions[bot]	c177c6d655	[create-pull-request] automated change (#6610) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2025-04-17 05:33:42 -05:00
Benjamin Kyd	a36f21b29a	Fix compiler error in PowerFSM when WiFi is excluded (#6603)	2025-04-17 11:36:19 +02:00
dylanli	d74359abf0	add support for Seeed solar panel (#6597) ... * add seeed_solar_node * fix RF_SW problem * fix IIC problem * Update Button redefination * Add on-board flash pin defination * fix missing a ',' * update seeed sorlar panel defination * fix word spell * fix upstream change * fix upstream change * fix upstream change * fix formate * Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption * fix led defination conflict * Delete lib/device-ui directory * Restore protobufs submodule --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-04-17 16:11:17 +10:00
Benjamin Kyd	5fd64d4114	Fix uninitialised memory read (adminModule) (#6605)	2025-04-16 14:42:08 -05:00
Aaron.Lee	e5cd0d613c	Make startup screen show the short ID (#6591) ... * Update the short ID show on the boot up screen function	2025-04-16 11:20:12 +02:00
Benjamin Kyd	64c8bde04a	Update platformio.ini to exclude unused modules from t1000-e (#6584) ... * Update platformio.ini to exclude unused modules * Add No EXT GPIO flag and also correct some exclusions in main * CANNEDMSG != CANNEDMESSAGES * Remove NO_EXT_GPIO	2025-04-16 10:12:23 +02:00
github-actions[bot]	4477031971	[create-pull-request] automated change (#6599)	2025-04-16 09:46:06 +02:00
todd-herbert	cf5c8de92e	Fix spurious button presses on some T-Echos (#6590) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-15 20:33:44 -05:00
Tom Fifield	98411d408a	Trunk fixes for heltec mesh pocket. (#6588) ... https://github.com/meshtastic/firmware/pull/6533 was merged without running trunk. This patch fixes the newly introduced trunk errors.	2025-04-15 16:37:09 -05:00
Ben Meadors	040a34fca8	Switch to actually maintained thingsboard pubsubclient (#5204) ... * Switch to actually maintained thingsboard pubsubclient * .0 * TBPubSubClient * SetBufferSize is split into Send and Receive. * Update TBPubSubClient to 2.11 * Update platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Re-add setBufferSize fix --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Austin <vidplace7@gmail.com>	2025-04-15 10:50:24 -05:00
github-actions[bot]	4e30023a4b	[create-pull-request] automated change (#6589) ... Co-authored-by: fifieldt <1287116+fifieldt@users.noreply.github.com>	2025-04-15 06:41:33 -05:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
Tavis	e7ce910c3b	Add generic thread module (#5484) ... * compiling, untested * use INCLUDE not EXLUDE for option to include module * protobuf update * working genericthread module Update protobufs * use EXCLUDE style instead of INCLUDE * Update Modules.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-11 19:38:44 +02:00
todd-herbert	06ce6f3e8a	fix: remove redundant GPS code targeting Heltec T114 (#6497)	2025-04-10 09:48:40 +10:00
todd-herbert	536b6d87c6	InkHUD support for LilyGo T3S3 E-Paper (#6503) ... * Purge an incomplete E-Ink driver * Use the deep-sleep mode of SSD16XX E-Ink displays * TwoButton doesn't need to store pin mode * Fix false positive button presses after light sleep * E-Ink driver for DEPG0213BNS800 * InkHUD support for LilyGo T3S3 E-paper --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 10:41:51 -05:00
GUVWAF	69f938ea98	Send UDP packet even if it's encrypted (#6524) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 06:13:49 -05:00
Ikko Eltociear Ashimine	1b1d4625aa	chore: update ubx.h (#6522) ... usefull -> useful	2025-04-08 14:04:33 -05:00
Thomas Göttgens	c94dd1e331	Minor adjustment of blink codes and 'unstick' the M2 button. (#6521)	2025-04-08 10:46:39 -05:00
Thomas Göttgens	a084073cc1	inkhud doesn't have a button thread (#6513)	2025-04-07 08:35:51 -05:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
github-actions[bot]	860e8eca5a	[create-pull-request] automated change (#6511) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2025-04-07 11:51:05 +02:00
Chris LaFlash	56eb0c08b2	Add support for Quectel-L96, a MT3333 module (#6498)	2025-04-06 11:49:01 +08:00
Nasimovy	1b33189fe6	remove duplicate HAS_LP5562 introduced by #6422 (#6494)	2025-04-04 08:35:15 -05:00
todd-herbert	25237a15ff	feat: menu entry to send adhoc-ping (#6492)	2025-04-04 05:53:54 -05:00
Ben Meadors	0110275494	Revert "Try-fix ESP32 wifi disconnects (#6363)" (#6493) ... This reverts commit a902776e57.	2025-04-04 04:59:31 -05:00
github-actions[bot]	4dfba50304	[create-pull-request] automated change (#6490) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-04-03 20:23:44 -05:00
Nasimovy	7494106170	TCA8418 initial config + basic 3x4 keypad config (#6422) ... * TCA8418 with base config for 3x4 keypad * replaced k with uppercase K * change detection method * reflect changes #6381 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-03 14:18:18 -05:00
rcarteraz	1017f6af35	remove very long slow (#6486)	2025-04-03 09:07:43 -05:00
Thomas Göttgens	594cb0cc1e	reinstate M1 Backlight (#6484)	2025-04-02 19:15:12 -05:00
Austin	ef18a9b5b5	meshtasticd: Set available.d dir in yaml (#6481)	2025-04-02 06:55:14 -05:00
Clément Hampaï	f6ed10f329	Added initial support for Texas Instruments LP5562 (#6381) ... * Added initial support for Texas Instrument LP5562 * Added proper support for Ambient Lighting * Code merge for all RBG_LED enabled devices * Fixed forgotten log_info & added firstRGBLED()	2025-04-01 22:39:40 +02:00
Benjamin Faershtein	644849126c	Fixes #6315 (#6475) ... * Fixed Canned Messages send to non broadcast * Small fix * Fix formatting for singular canned message * Trunk fmt --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-01 12:50:10 -05:00
Manuel	ea4ce8d827	MUI unPhone-tft: fix defaults (#6477)	2025-04-01 08:53:15 -05:00
todd-herbert	128c347c64	fix: T-Echo frontlight on at boot when using OLED UI (#6474)	2025-04-01 05:26:46 -05:00
Austin	2c01fad798	meshtasticd: Add FrequencyLabs MeshAdv-Mini Hat (#6458)	2025-03-31 07:31:54 -05:00
Ben Meadors	a5efbfccd7	Disable bluetooth config on rp2040, portduino (for now), and stm32 (#6465) ... * Disable bluetooth config on rp2040, portduino (for now), and stm32 * Add comments and exclude C6	2025-03-31 06:32:54 -05:00