1011 Commits

Author	SHA1	Message	Date
Szetya	1b97cf57ad	Correcting GPS PINs (#8087) ... https://github.com/meshtastic/firmware/issues/8084 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-04 05:44:47 -05:00
Austin	0c2283e19e	GAT562: Use PRIVATE_HW (fix build) (#8198)	2025-10-03 16:48:21 -05:00
Ben Meadors	775595cb37	Merge pull request #8160 from Quency-D/dev-heltec-tracker-v2 ... add heltec tracker v2 board.	2025-10-03 08:21:15 -05:00
Ben Meadors	e954591ca5	Merge branch 'develop' into fix/tlora-pager-rotary-amplifier	2025-10-02 14:40:37 -05:00
Ben Meadors	0860fee209	Merge branch 'develop' into dev-heltec-tracker-v2	2025-10-02 06:10:00 -05:00
Ben Meadors	878ac3ec84	Update variants/esp32s3/heltec_wireless_tracker_v2/variant.h ... Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-10-02 06:09:52 -05:00
Ben Meadors	af83670376	Merge pull request #8179 from meshtastic/develop ... Develop -> master	2025-10-01 15:30:57 -05:00
rcarteraz	17afdb9ccf	no more t-rex	2025-10-01 13:32:44 -05:00
Jonathan Bennett	ad44940732	Put the GPIO in the right state for wake from sleep	2025-10-01 13:32:44 -05:00
Jonathan Bennett	8b466b1db3	T-rex comment cleanup	2025-10-01 13:32:44 -05:00
Jonathan Bennett	f9937967fa	Add HardwareModel and correct directories	2025-10-01 13:32:44 -05:00
Jonathan Bennett	4fd568f384	Initial support for T-Rex	2025-10-01 13:32:44 -05:00
Quency-D	500e7920ae	delete SX126X_MAX_POWER=11	2025-09-30 14:06:46 +08:00
Tom Fifield	0f6131d2c8	Use common power amp definition for Heltec v4 and Heltec Tracker v2	2025-09-30 08:30:18 +10:00
Quency-D	8d323a1cf1	add heltec tracker v2 board.	2025-09-30 08:20:48 +10:00
Tom Fifield	a3e6f16378	Introduce non-linear TX_GAIN_LORA (#8107) ... * Introduce non-linear TX_GAIN_LORA Previously, our TX_GAIN_LORA setting was a single number, intended to represent the signal gain going through a power amp (plus or minus antenna, attenuator, and other parts of the RF chain). It turns out the relationship between the input power (i.e. from an SX1262) and total output power is often non-linear. While we fudged a 1dBm difference here and there with existing chips, the Heltec v4 has a 5dBm difference in gain depending on which end of the input power (and frequency) you are at. To allow people to run their Heltec v4 at max power when legal, and future proof our code, this patch introduced an optional array-based TX_GAIN_LORA. Define NUM_PA_POINTS and set TX_GAIN_LORA to gain values for a given input power in 1dBm increments, and all will work. For linear systems, just continue to define TX_GAIN_LORA as a number. Fixes https://github.com/meshtastic/firmware/issues/8070 * Remove temporary power limit on heltec v4 * Add function RadioLibInterface::checkOutputPower * Ensure SX126x reaches minimum supported power. * Keep it simple, instead.	2025-09-30 08:20:39 +10:00
WillyJL	47a82bdb98	Fix duplicated lines from merge (#8104)	2025-09-24 16:36:14 -05:00
Ben Meadors	371313080b	Merge branch 'master' into develop	2025-09-24 06:18:13 -05:00
Ben Meadors	db55d8a59d	Trunk	2025-09-24 06:16:51 -05:00
Quency-D	949f881ae8	Add three expansion screens for heltec mesh solar. (#7995) ... * Add three expansion screens for heltec mesh solar. * delete whitespace Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * delete whitespace Update variants/nrf52840/heltec_mesh_solar/platformio.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-09-24 06:16:51 -05:00
Quency-D	c33c368315	Add three expansion screens for heltec mesh solar. (#7995) ... * Add three expansion screens for heltec mesh solar. * delete whitespace Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * delete whitespace Update variants/nrf52840/heltec_mesh_solar/platformio.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-09-24 06:14:24 -05:00
Ben Meadors	8e04f9f631	Merge branch 'master' into develop	2025-09-24 06:03:14 -05:00
Ben Meadors	8e608e8186	Heltec V4 is 16mb	2025-09-23 06:04:47 -05:00
WillyJL	da4bc0f97c	Merge remote-tracking branch 'upstream/develop' into fix/tlora-pager-rotary-amplifier	2025-09-21 21:12:06 +02:00
Quency-D	cea9e1238b	Add heltec_v4 board. (#7845) ... * add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-09-21 07:13:28 -05:00
Quency-D	11eb4a5b90	Add heltec_v4 board. (#7845) ... * add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-09-21 07:03:44 -05:00
Tom	d1fd102952	Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036) ... * Update platformio.ini * Remove some more extraneous lines	2025-09-21 06:28:28 -05:00
Tom	5701755608	Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036) ... * Update platformio.ini * Remove some more extraneous lines	2025-09-21 06:27:39 -05:00
WillyJL	bfb03b422a	Merge remote-tracking branch 'upstream/develop' into fix/tlora-pager-rotary-amplifier	2025-09-20 02:36:57 +02:00
Jonathan Bennett	cc579dd0bd	Portduino config refactor (#7796) ... * Start portduino_config refactor * refactor GPIOs to new portduino_config * More portduino_config work * More conversion to portduino_config * Finish portduino_config transition * trunk * yaml output work * Simplify the GPIO config * Trunk	2025-09-19 08:24:35 -05:00
Michael	2bafac242e	Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753) ... * Added compatibility between nodes on different Presets through `Mesh via UDP` * Optimize multicast handling and channel mapping - FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression. - Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets to the local default channel via isDefaultChannel() - UdpMulticastHandler: set transport_mechanism only after successful decode * trunk fmt * Move setting transport mechanism. --------- Co-authored-by: GUVWAF <thijs@havinga.eu>	2025-09-18 20:37:05 -05:00
Ben Meadors	b13d023d58	Merge branch 'master' into develop	2025-09-18 19:50:16 -05:00
WillyJL	9345bdcb22	T-Lora Pager: Support LR1121 and SX1280 models (#7956) ... * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs	2025-09-18 19:49:28 -05:00
Ben Meadors	8f0e17a653	Merge branch 'master' into develop	2025-09-18 19:18:53 -05:00
Thomas Göttgens	71d84404c6	add WIP for Unit C6L (#7433) ... * add WIP for Unit C6L * adapt to new config structure * Add c6l BLE and screen support (#7991) * Minor c6l fix * Move out of PRIVATE_HW --------- Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <Xaositek@users.noreply.github.com> Co-authored-by: Markus <Links2004@users.noreply.github.com>	2025-09-17 22:40:55 +02:00
Michael	b9d53d667e	Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753) ... * Added compatibility between nodes on different Presets through `Mesh via UDP` * Optimize multicast handling and channel mapping - FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression. - Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets to the local default channel via isDefaultChannel() - UdpMulticastHandler: set transport_mechanism only after successful decode * trunk fmt * Move setting transport mechanism. --------- Co-authored-by: GUVWAF <thijs@havinga.eu>	2025-09-15 19:29:47 -05:00
WillyJL	3d86c99c25	T-Lora Pager: Interrupt based rotary encoder	2025-09-14 18:48:58 +02:00
Ben Meadors	09de0e3edb	Merge branch 'master' into develop	2025-09-14 08:15:25 -05:00
Ben Meadors	9211b1bb4b	Static memory pool allocation (#7966) ... * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev>	2025-09-13 07:01:07 -05:00
Ben Meadors	51acd92a37	Trunk	2025-09-13 06:51:18 -05:00
WillyJL	6d2093650a	T-Lora Pager: Support LR1121 and SX1280 models (#7956) ... * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs	2025-09-13 06:50:53 -05:00
WillyJL	566c2c3fdf	T-Lora Pager: Support LR1121 and SX1280 models (#7956) ... * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs	2025-09-13 06:50:02 -05:00
Tom Fifield	abc0eb196a	Fix build error in rak_wismesh_tap_v2 (#7905) ... In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices.	2025-09-10 16:28:49 -05:00
Ben Meadors	ca4b98f2b1	Merge branch 'master' into develop	2025-09-09 08:42:29 -05:00
Ben Meadors	d1d16fc25f	Make phone queues use a static pointer queue (#7919) ... * Make phone queues use a static pointer queue * Static init * Compile time constants now * Instead, lets just use the normal pointerqueue for linux native builds and static for IoT platforms * Add missing method * Missing methods * Update variant.h	2025-09-09 08:21:46 -05:00
Ben Meadors	1643249db7	Revert "Remove board_level from Meshtiny. (#7933)" (#7935) ... This reverts commit 2191fe465c.	2025-09-09 05:48:05 -05:00
Wilson	2191fe465c	Remove board_level from Meshtiny. (#7933)	2025-09-09 14:20:24 +08:00
Ben Meadors	569a911455	Merge pull request #7915 from meshtastic/master ... Master backmerge	2025-09-08 05:58:00 -05:00
Manuel	39ff880506	reorganize 8MB partition for MUI devices (#7860) ... * reorganize 8MB partition for MUI devices * update device-install scripts to MUI 8MB partition scheme	2025-09-08 05:56:47 -05:00
Tom Fifield	c5b95f5a4b	Disable web server on Picomputer (#7907) ... Meshtastic no longer fits on the flash of the Picomputer. Since this is a handheld, portable device, it's unlikely that people are connecting to it via the webserver. So, disable the webserver and it fits again: ``` Checking size .pio/build/picomputer-s3-tft/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [=== ] 32.4% (used 106056 bytes from 327680 bytes) Flash: [==========] 99.1% (used 3313913 bytes from 3342336 bytes) ``` Fixes: https://github.com/meshtastic/firmware/issues/7906	2025-09-08 05:56:19 -05:00