* End wire if we find no i2c devices
* Set tx-power to 0 on nrf bluetooth shutdown
* Change polling interval of PowerFSM to 100ms instead of 10ms
* Guard 3v3
* Pico W: Initial WiFi support: connects, but freezes after a while
* Update arduino-pico core to fix hang with Wi-Fi
* Add `picow` to workflow since it's different from `pico` now
* Each pin individually
* Correction
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add configuration via /etc/meshtastic/config.yaml
* Move example config, support more locations
* Fix config check
* Use access() to check for config file presence
* Throw an error and exit on radio init fail
* Adds error check for reading Bluetooth MAC
* Settle on meshtasticd, add install script
* Shell fixes
* Fine. I'll put it back and then disable you
* Get wrekt, shellchekt
* Firat attempt at adding raspbian CI build
* Tickle the workflow
* Beatings will continue til morale improves
* Permissions are overrated
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Use UINT32_MAX to indicate no configured GPS
* Refactor GPS to not probe if pins not defined
* Minor cleanups related to rework
* Use Named Constructor to clean up code
* Actually disable the GPS thread
* Don't actually disable the GPS thread
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* T-Watch WIP
* Updates
* Temp
* Update screen spi bus and and backlight en
* Peripherals progress
* Fixes
* Fixes
* Updates
* DRV scaffolding
* Fixed touch-screen driver selection. WIP on DRV haptic feedback
* DRV2605 pmu channel
* Trunk
* Fixes and defaults
* Dropped an s
* Move PMU and turn off screen that way
* Add t-deck and t-watch-s3 to CI and cleanup
* More cleanup
* add hwid for auto-detection
* fix: heltec-wireless-tracker USB serial
* T-Deck support
* trunk fmt
* set FRAMERATE to 1
* fix some defines
* trunk fmt
* corrected vendor link
* WIP
* Comment
* WIP
* TFT_CTRL
* Update platformio.ini
update to current latest version available
* Update EInkDisplay2.cpp
Is the e-ink Display a DEPG0213BN ?
* Logging
* trunk fmt
---------
Co-authored-by: Mark Trevor Birss <markbirss@gmail.com>
* Make input_source case insensitive
* Implement reboot for RP2040
* Remove EXT_NOTFIFY_OUT as it conflicts with I2C and module is not supported
* RP2040 has screen, button and wire
* Add default I2C pins also for Pico W
* Initial support for MonteOps's fixed hardware platform
* Update platformio env config + cleanup
* Fix platformio build
* Fix platformio build
* Fix wrong definition logic for NCP5623
* Fix another wrong definition logic for NCP5623, it's not board feature
* Fix wrong definition logic for NCP5623 in External Notification code, it's not board feature
* We need for CI magic here
* Another fix related to NCP5623
* Fix cosmetic issue with redifined variable
* Fix typo
* Cleanup and update defs for HW1
* Fix OEM RAK4631
* Fix AQ sensor reading
* Fix AQ sensor reading (better variant)
* Fix build for other nRF52 devices
* Replace HAS_EINK_RAK to RAK_4631
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* Wio-e5 / STM32WL wip
* Stubbing some FS stuff out
* LittleFS compiles. Can't check with actual device.
* make cppcheck happy again
* Guard against accelerometer thread
* Missed a spot
* Upload via ST-LINK
* Derive MAC address from UID
* upload port
* Trunk it
* Guard it
* Maybe fix the cache error on startup.
* Latest RadioLib ref to fix SubGHZ
* revert nasty Sub-GHz Hack
* Boots and radio inits with RadioLib 6.0, LittleFS doesn't seem to work
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
This function causes the new arduino-esp32 core to revert to the pseudorandom behavior specified in Arduino.
Calls to random() automatically use esp_random() if randomSeed or useRealRandomGenerator(false) aren't called.
Tentative fix for #2357
* Yank mqtt service envelope queue
* trybuildfix mqtt system
* removed too much
* no excessive heap debugging on release builds
* send QueueStatus messages
The QueueStatus message is sent as a response to the attempt to queue
an outgoing MeshPacket and contains statuses of the last queue
attempt, TX Queue space and capacity and MeshPacket.id that was
queued.
When TX Queue changes status from completely full to at least
a single slot free a QueueStatus message is also sent to notify
that user can queue more messages.
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
* WIP: update protobufs
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
* update protobufs
* regen protos
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Sacha Weatherstone <sachaw100@hotmail.com>
