Ben Meadors
209fb585b0
Default to what G2 comes with
2023-11-30 20:49:00 -06:00
S5NC
fb89482129
Set default LoRa SPI pins individually on ESP32 architecture ( #2971 )
...
* Each pin individually
* Correction
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2023-11-30 06:39:46 -06:00
Thomas Göttgens
8e742f2f80
Update portduino.ini
2023-11-30 11:53:47 +01:00
Thomas Göttgens
238cf8cdeb
fix portduino
2023-11-30 11:53:47 +01:00
Thomas Göttgens
5df7f07f95
unpin radiolib
2023-11-30 11:53:47 +01:00
Thomas Göttgens
6fa026a78b
fix radiolib API for 6.3.0 release
2023-11-30 10:59:01 +01:00
Jonathan Bennett
39743832ad
Revert Portduino RadioLib to 6.1.0
2023-11-29 20:19:10 -06:00
Jonathan Bennett
bd2675caf1
Temporarily Pin RadioLib to 6.2.0
2023-11-29 20:19:10 -06:00
Jonathan Bennett
c489c251ab
Pull in Portduino changes for Raspberry Pi support
2023-11-29 20:19:10 -06:00
Jonathan Bennett
14d03a2bda
Initial implementation of I2C
2023-11-29 20:19:10 -06:00
Jonathan Bennett
423b8ad603
Adds real GPS support to Raspberry Pi arch
2023-11-29 20:19:10 -06:00
Jonathan Bennett
ce8342d3e5
Drop Pi HAL
2023-11-29 20:19:10 -06:00
Jonathan Bennett
57227c0f85
Add gpiochip setting
2023-11-29 20:19:10 -06:00
Jonathan Bennett
1ca2923658
Fix missed #if defined() logic
2023-11-29 20:19:10 -06:00
Jonathan Bennett
d10b1e1d00
Add better error reporting for RF95 init failure
2023-11-29 20:19:10 -06:00
Jonathan Bennett
d3e64350d9
Remove RADIOLIB_SPI_PARANOID compile option, as it does nothing
2023-11-29 20:19:10 -06:00
Jonathan Bennett
102efd4954
Move to portduino GPIO, adding user button support
2023-11-29 20:19:10 -06:00
S5NC
18cf8ca4fa
Generalise SPI pin names ( #2970 )
...
* Generalise SPI pin names
* CS not NSS
* trunk fmt
* Update variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2023-11-29 15:51:05 -06:00
Ben Meadors
c7f6071f70
Enable IO2 toggling on RAK if the coast is clear ( #2968 )
...
* Enable IO2 toggling on RAK if the coast is clear
* Guard against monteops target which doesn't use 3V3 pin
* Also check for en_gpio = 0 to avoid re-setting the value
2023-11-28 20:40:51 -06:00
Thomas Göttgens
c7e3485dd7
Revert "same change for STM32WL - also update trunk"
...
This reverts commit f9fdb0f98d
2023-11-26 14:49:11 +01:00
Thomas Göttgens
603e564db3
same change for STM32WL - also update trunk
2023-11-26 14:49:11 +01:00
Thomas Göttgens
ac318a9850
Swapped out crypto engine for one that also works with AES-256
2023-11-26 14:49:11 +01:00
Ben Meadors
1feb74f525
Add number of sats to default position flags ( #2962 )
2023-11-25 19:34:30 -06:00
Thomas Göttgens
d6fc1c314f
WIP: Add battery level for Nimble
2023-11-25 16:03:39 +01:00
Thomas Göttgens
b3852322ef
Add config example for Elecrow Hat
...
NFC
2023-11-24 14:40:20 +01:00
HookdomPonix
cbb8eb65ba
Add USB detection to RAK4631 based boards. ( #2956 )
...
* Add support for the rak10701 board, no touch
* Moved tftblack fillin and changed teh src flags
* Added rak10701 to platformio.ini
* Add USB detection to RAK4631 units.
* Eliminate spurious symbol in comment field.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2023-11-22 10:30:55 -06:00
Jonathan Bennett
4712b1ca65
Add manual run option to package_raspbian.yml ( #2954 )
2023-11-22 07:17:48 -06:00
Ric In New Mexico
57542ce9e6
Retain device nodeinfo during reset-nodedb ( #2951 )
...
* INA3221 bugfixes & refinement
Reorganized and refactored some INA3221 code
Added comments
Added missing shunt resistor value (100mΩ)
Added INA3221 Channel 1 to getINAVoltage() for device battery monitoring
modified: src/Power.cpp
modified: src/modules/Telemetry/PowerTelemetry.cpp
modified: src/modules/Telemetry/Sensor/INA3221Sensor.cpp
modified: src/modules/Telemetry/Sensor/INA3221Sensor.h
modified: src/power.h
* reset-nodedb retain device nodeinfo
modified: src/mesh/NodeDB.cpp
* reset-nodedb #2
modified: src/mesh/NodeDB.cpp
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
2023-11-20 06:33:14 -06:00
Jonathan Bennett
1b20a82b55
Update package_raspbian.yml
...
Trunk
2023-11-19 20:28:37 -06:00
Jonathan Bennett
195706e0e5
Update package_raspbian.yml to pull correct code for PR runs
2023-11-19 20:19:43 -06:00
Jonathan Bennett
c1f5878648
Add Raspbian to firmware zip
2023-11-19 17:11:54 -06:00
Jonathan Bennett
7380f3b170
Trunk fmt fix whitespace
2023-11-19 16:53:00 -06:00
Jonathan Bennett
a9d846c1b3
make package_raspbian.yml a reusable workflow
2023-11-19 16:45:06 -06:00
Jonathan Bennett
cfb09ee115
add .deb to release
2023-11-19 16:41:47 -06:00
Jonathan Bennett
8f0ce606db
Update package_raspbian.yml upload .deb as artifact
2023-11-19 16:07:08 -06:00
Jonathan Bennett
d04ff29c2a
Update package_raspbian.yml use ubuntu-latest
2023-11-19 15:56:41 -06:00
Jonathan Bennett
8e92754b59
Update package_raspbian.yml
2023-11-19 15:48:43 -06:00
Jonathan Bennett
dad824c0e9
Update package_raspbian.yml -- add checkout step
2023-11-19 15:16:11 -06:00
Jonathan Bennett
31d7c6826d
Update package_raspbian.yml
...
Properly run build_raspbian as a step
2023-11-19 15:03:46 -06:00
Jonathan Bennett
d33521ee86
Add package-raspbian workflow
2023-11-19 14:53:49 -06:00
Jonathan Bennett
5ad12fed60
Chill out, yamllint
2023-11-19 14:53:49 -06:00
Jonathan Bennett
4af90eeb39
Revamp yaml config for Raspbian
2023-11-19 14:53:49 -06:00
Jonathan Bennett
08297bb0b7
Copy and Paste output file location for workflow
2023-11-18 15:36:41 -06:00
Jonathan Bennett
16ef40b21f
Add even moar workflow debugging
2023-11-18 15:16:36 -06:00
Jonathan Bennett
7ef4abb974
Add debugging output to main workflow
2023-11-18 14:56:40 -06:00
Jonathan Bennett
297267d037
Try harder to find Raspbian binary
2023-11-18 13:26:05 -06:00
Jonathan Bennett
f8e766ebc7
Include Raspbian in release zip
2023-11-18 12:05:51 -06:00
Jonathan Bennett
7bd2b07024
Disable radiolib debug
2023-11-18 12:05:51 -06:00
Jonathan Bennett
b6ddbd0087
More CI work for Raspbian ( #2949 )
...
* More CI work for Raspbian
* Workaround quirks of Arm64/debian runners
2023-11-18 11:04:21 -06:00
Jonathan Bennett
dc8903ec42
Add Raspbian to Main CI ( #2948 )
2023-11-18 08:55:19 -06:00
