925 Commits

Author	SHA1	Message	Date
Jonathan Bennett	4feaec651f	Unify the native display config between legacy display and MUI (#6838) ... * Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-21 06:36:04 -05:00
Andrew Yong	82b7cb5dd0	fix(xiao_ble): Typo preventing SX1262 init (SX126X_CS gets stuck) (#7094) ... Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-21 06:17:46 -05:00
Andrew Yong	58743021c8	XIAO BLE cleanup (supporting changes to seeed_xiao_nrf52840_kit too) (#7024) ... * chore(seeed_xiao_nrf52840_kit): Use build flag for L76K GNSS, rename variant.h ifdef Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Support multiple SX126x pinouts via build flags Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Pin D0 as user button if pin is unused Signed-off-by: Andrew Yong <me@ndoo.sg> * feat: EBYTE E22 and NiceRF gain and SX1262 max power defines Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(xiao_ble): Move variant to DIY and extend from seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Pin D6, D7 as I2C SDA, SCL if pins are unused Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-19 18:51:33 -05:00
Justin E. Mann	2fb46ce5d5	Add rak12035 VB Soil Monitor Tested & Working (#6741) ... * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * Update to 1.0.4 release of RAK12035_SoilMoisture * cleanup * cool * . * .. * little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500 looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500. improvements could be made around the configuration of the monitor. next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity. * . comments about current limitations and TODOs * trunk update * trying to autoformat.. * fix formatting attempt 2 * .. * ... * ... * . * some corrections and local build success * correction in temp code * grr formatting * cleanup after a few experiments * remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos. * update some values in varient for rak wistap * working out trunk formatting.. * wip . corrections to other build variants * . * protobuffs? * protobufs? * Update protobufs ref * Protobufs ref * Trunk * Update RAK12035Sensor.cpp * Fmt * comment changes * dumb mistakes... resolved, actually built and tested.. all good.. * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * . proto submod * proto * proto * merge master * mabe a fix for GPS pin conflict, waiting on a new gps module to try * merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035 * . * . --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-19 18:51:03 -05:00
Hannes Fuchs	2c206febab	Fix nugget s3 lora variant issues (#7070) ... * Fix serial communication for nugget s3 lora Without setting `ARDUINO_USB_CDC_ON_BOOT=1` the serial interface on the nugget s3 lora board does not work. * Fix nugget s3 lora variant definitions	2025-06-19 18:48:22 -05:00
dylanliacc	afcd97c154	trunk fmt	2025-06-16 16:16:14 -05:00
Dylanliacc	cbdd7eae70	fix IIC port	2025-06-16 16:15:59 -05:00
Taha	bd0e25f3f5	Fix Critical Error #3 for LilyGo T-Echo (#6791) ... * Fix Critical Error #3 * clang format	2025-06-16 13:32:28 +10:00
Jonathan Bennett	8a8a7cdefc	cppcheck-supress to ignore intentional error	2025-06-15 16:37:19 -05:00
Andy Shinn	f1dd623ce9	allow overriding INA3221 channels (#7035) ... Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-06-15 07:39:49 -05:00
todd-herbert	425f384b1f	InkHUD DIY builds for ProMicro & Heltec T114 (#7039) ... * DIY InkHUD variants (ProMicro & T114) * Fix file encoding > We’ve detected the file encoding as ISO-8859-1. When you commit changes we will transcode it to UTF-8. * Update comment justifying trunk suppression	2025-06-15 09:39:46 +10:00
Ben Meadors	cc0fbfbd21	Fixed breaking of inkhud / tft suffix convention	2025-06-13 06:59:05 -05:00
Csrutil	5d0bf03b01	add support for GAT562 Mesh Trial Tracker (#6984) ... * add support for GAT562 Mesh Trial Tracker * Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER * Added RAK4630 for led pin 2 (blue) * Added RAK4630 for led pin 2 (blue) comment * don't touch src/mesh/NodeDB.cpp * set fixed baudrate for gat562_mesh_trial_tracker * adjust the order of the HW_VENDOR defines --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-13 17:27:48 +10:00
Tom Fifield	8557bd031d	Remove GPS Baudrate locking for Seeed Xiao NRF52840 Kit (#7016) ... The Seeed Xiao NRF52840 Kit's default GPS is an L76K which operates at 9600 baud, so when this variant was defined that baud rate was specified. However, this is a development board and it is expected that users can attach their own devices. This includes GPS, which may operate at a different baud rate. The current fixed baud rate prevents this, so this patch removes that setting. This will revert to the regular automatic probe method. This will sucessfully detect the L76K as before (probably the same as before since 9600 baud is the first baud rate checked), but also allow other GPSes at other baud rates to be detected. Fixes https://github.com/meshtastic/firmware/issues/7012 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-12 19:56:40 -05:00
Ben Meadors	60ec05e536	elecrow-adv-35-tft	2025-06-11 10:54:08 -05:00
Ben Meadors	730cd388d6	Fix pio	2025-06-11 08:49:20 -05:00
Ben Meadors	6549b0477c	Missed a spot	2025-06-11 06:10:34 -05:00
Ben Meadors	8304cae010	Fix issue with CI not picking up elecrow panels due to confusing env	2025-06-11 06:09:25 -05:00
Andreas 'count' Kotes	c6c2a4d4dd	Improve support for Heltec Wireless Bridge (#6647) ... * Use BLE_LED where present for CONNECTED/DISCONNECTED * Use WIFI_LED where present for WiFi started/stopped (as AP) or connected/disconnected (as Station) * improve support for Heltec Wireless Bridge * satisfy 'trunk fmt'	2025-06-10 13:54:07 +10:00
Clément Hampaï	1eacdd0629	[Variant] nomadstar meteor pro (#6742) ... * Initial support for NomadStar Meteor Pro * Cleaned up Platformio variant comments * Removed RTC & ETH deps. * Removed RGB NCP5623 deps, Enabled AmbientLight by default * Added HWID mapping * Updated Armduino-Semihosting lib dep with archived version. * Fixed trunk linting in AmbientLightingThread.h and hydra variant	2025-06-10 07:48:52 +10:00
Manuel	7924ef87b5	enable custom driver (#6988) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-09 05:41:41 -05:00
Tom	15d2ae17f8	Add note to hydra to note that the button pin has no pull-up (#6979) ... Add note to hydra to note that the button pin has no pull-up. Use an external resistor or remove the `#define`.	2025-06-07 06:55:58 -05:00
Andrew Yong	070deb290f	seeed_xiao_nrf52840_kit improvements (#6930) ... * feat: seeed_xiao_nrf52840_kit improvements - LEDs: - Change RGB LED to be active low as it is common anode - Remove re-definition of LED_PIN - Use red LED to indicate flash writes - Use blue LED as user LED (External Notification module) - GPIO: Re-word unused BUTTON_PIN comment - Wire: Set I2C pins to match XIAO nRF52840 Sense's LSM6DS3TR IMU - Battery: - Use charge LED to detect charging state - Move voltage divider boilerplate out of src/main.cpp and into initVariant() - Fix dependencies for above in related XIAO BLE DIY variants Build tested variants: - seeed_xiao_nrf52840_kit - xiao_ble - seeed-xiao-nrf52840-wio-sx1262 Flashed to and tested on hardware: - seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(seeed_xiao_nrf52840_kit): Re-order generic GPIO definitions Signed-off-by: Andrew Yong <me@ndoo.sg> * chore: Use ADC_CTRL for XIAO nRF52840 Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-05 06:45:43 -05:00
Ben Meadors	7a7166d575	Revert "Add a new screen for heltec_wireless_paper. (#6894)" (#6918) ... This reverts commit ba53543354.	2025-05-29 10:17:20 -05:00
Quency-D	ba53543354	Add a new screen for heltec_wireless_paper. (#6894) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:10:25 -05:00
Ben Meadors	7849a3d291	Trunk	2025-05-29 06:35:18 -05:00
dylanli	c0c2ec195f	add support for seeed wio tracker L1 (#6907) ... * add support for seeed wio tracker l1 * add support in nrf52 arch * fix ADC problem and comments incorrect * fix gps wakeup pin * fix gps pin	2025-05-29 06:33:22 -05:00
Thomas Göttgens	96c18d9908	Add LINK32 (Lilygo) Board with Light+Environment sensors (#6899) ... * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Update to real HWID and trunk fmt	2025-05-27 18:11:32 -05:00
Andrew Yong	e29588d2e2	feat(RadioInterface): Tx power gain calculation rework (#6796) ... - Rename REGULATORY_GAIN_LORA to TX_GAIN_LORA - Move gain-based Tx power clamping from RadioInterface::applyModemConfig() to RadioInterface::limitPower() - User-configured Tx power now matches the Tx power out of the device connector - Re-order [LoRa Chip]Interface.cpp limitPower() to take place before the final Tx power clamping so we clamp based on the pre-PA Tx power rather than user-configured Tx power Tested on XIAO BLE variant. Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 06:26:31 -05:00
dylanli	c01db98819	update seeed solar node led pin (#6871)	2025-05-23 08:04:17 -05:00
todd-herbert	ba1ef45024	InkHUD Extended ASCII (#6768) ... * Custom AdafruitGFX fonts with extended ASCII encodings * AppletFont handles re-encoding of UTF-8 text * Manual parsing of text which may contain non-ASCII chars * Display emoji reactions, even when unprintable Important to indicate to users that a message has been received, even if meaning is unclear. * Superstitious shrink_to_fit I don't think these help, but they're not hurting! * Use Windows-1252 fonts by default * Spelling * Tidy up nicheGraphics.h * Documentation * Fix inverted logic Slipped in during a last minute renaming while tidying up to push..	2025-05-22 18:16:53 -05:00
rcarteraz	b1955c34aa	Update Seeed Solar Node (#6763) ... * Update Seeed Solar Node * Update Seeed Solar Node * updates * updates * updates --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-14 06:32:24 -05:00
Richard Zhang	d9ad2322e8	Fixes BUG #6243 Heltec Tracker (#6781) ... * fix wireless tracker screen issues * fix SHTC3 BUG * Remove the 32K crystal oscillator option for the Wireless Paper and Vision Master series. * Correct spelling errors * Update src/graphics/Screen.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 06:29:05 -05:00
Thomas Göttgens	cc66f7c79b	Crowpanel 4.3, 5.0, 7.0 support (#6611) ... * SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-05-13 14:15:52 +02:00
Tom	ca9bf6b31a	Update XIAO_NRF_KIT RXEN Pin definition (#6717) ... The XIAO NRF kit comes with a hat which has a slightly different pinout than the one supplied with the XIAO S3. At the last update, the RXEN pin was not moved with the rest.	2025-05-07 21:20:15 -05:00
Austin	2d6181fca0	update bosch bsec2 (#6727) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-05 06:03:36 -05:00
Manuel	a8ab6e82e6	MUI framebuffer support (#6703) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 20:50:30 -05:00
Colin	72eae42b81	PMSA003I: add support for driving SET pin low while not actively taking a telemetry reading (#6569) ... * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * RAK4631: add PMSA003I_ENABLE_PIN define * fix indentation --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-29 06:31:01 -05:00
todd-herbert	89df9d7686	Fix WiPhone variant.h (#6664)	2025-04-24 20:40:48 -05:00
Manuel	24e9539d40	remove buzzer (#6652)	2025-04-22 06:25:07 -05:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
dylanli	d74359abf0	add support for Seeed solar panel (#6597) ... * add seeed_solar_node * fix RF_SW problem * fix IIC problem * Update Button redefination * Add on-board flash pin defination * fix missing a ',' * update seeed sorlar panel defination * fix word spell * fix upstream change * fix upstream change * fix upstream change * fix formate * Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption * fix led defination conflict * Delete lib/device-ui directory * Restore protobufs submodule --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-04-17 16:11:17 +10:00
Niklas	e0dafc3618	fix: set upload_speed for tlora_v1 (#6601)	2025-04-16 06:15:16 -05:00
Benjamin Kyd	64c8bde04a	Update platformio.ini to exclude unused modules from t1000-e (#6584) ... * Update platformio.ini to exclude unused modules * Add No EXT GPIO flag and also correct some exclusions in main * CANNEDMSG != CANNEDMESSAGES * Remove NO_EXT_GPIO	2025-04-16 10:12:23 +02:00
Niklas	1138f74e2c	fix: set upload_speed for tlora_v1_3 & tlora_v2_1_16 (#6595)	2025-04-15 20:39:13 -05:00
todd-herbert	cf5c8de92e	Fix spurious button presses on some T-Echos (#6590) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-15 20:33:44 -05:00
Tom Fifield	98411d408a	Trunk fixes for heltec mesh pocket. (#6588) ... https://github.com/meshtastic/firmware/pull/6533 was merged without running trunk. This patch fixes the newly introduced trunk errors.	2025-04-15 16:37:09 -05:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
Kevin Jahaziel Leon Morales	7079f538ed	feat: Add Electronic Cats variant for Catsniffer (#6483) ... * feat: Add Electronic Cats variant for catsniffer * fix: Trunk fmt * fix: Variant error	2025-04-11 13:26:30 +02:00
Ken Piper	baa05aacf5	fix: Correct underlying cause of T-Watch not functioning when set to a 16MB filesystem (#6563) ... * Fix maximum flash size in T-Watch S3 board definition * Revert "Fix: T-Watch-S3 has 8MB Flash (#6407)" This reverts commit 769f0623be.	2025-04-11 13:04:37 +02:00
todd-herbert	536b6d87c6	InkHUD support for LilyGo T3S3 E-Paper (#6503) ... * Purge an incomplete E-Ink driver * Use the deep-sleep mode of SSD16XX E-Ink displays * TwoButton doesn't need to store pin mode * Fix false positive button presses after light sleep * E-Ink driver for DEPG0213BNS800 * InkHUD support for LilyGo T3S3 E-paper --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 10:41:51 -05:00
Andrik45719	5256ae90dc	DIY v1/v1_1 add TCXO_OPTIONAL make it so that the firmware can try both TCXO and XTAL (#6534) ... * EBYTE_E22 TCXO_OPTIONAL * EBYTE_E22 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 10:40:38 -05:00
Thomas Göttgens	fc3d9f2a15	fix power pin definition	2025-04-09 14:55:23 +02:00
Mark Trevor Birss	e2933bcb5b	Update platformio.ini (#6512)	2025-04-07 07:04:31 -05:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
Nasimovy	2125c03974	Fix for PSRAM detection on ESP32-S3R8 and t-beam (#6504) ... * remove duplicate HAS_LP5562 introduced by #6422 * T190 PSRAM fix * all the boards with a ESP32-S3R8 * T-beam V1.1 PSRAM	2025-04-06 20:27:46 -05:00
Manuel	ea4ce8d827	MUI unPhone-tft: fix defaults (#6477)	2025-04-01 08:53:15 -05:00
todd-herbert	ae88759059	draft an InkHUD variant for Elecrow Thinknode M1 (#6473) ... Only an initial guess. No hardware here yet for testing. Button assignments are largely placeholder. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-31 19:08:23 -05:00
todd-herbert	886bffe8f3	fix: honor user button customization (#6400) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-31 06:03:44 -05:00
todd-herbert	bd2d2981c9	Add InkHUD driver for WeAct Studio 4.2" display module (#6384) ... * chore: todo.txt * chore: InkHUD documentation Word salad for maintainers * refactor: don't init system applets using onActivate System applets cannot be deactivated, so we will avoid using onActivate / onDeactivate methods entirely. * chore: update the example applets * fix: SSD16XX reset pulse Allow time for controller IC to wake. Aligns with manufacturer's suggestions. T-Echo button timing adjusted to prevent bouncing as a result(?) of slightly faster refreshes. * fix: allow timeout if display update fails Result is not graceful, but avoids total display lockup requiring power cycle. Typical cause of failure is poor wiring / power supply. * fix: improve display health on shutdown Two extra full refreshes, masquerading as a "shutting down" screen. One is drawn white-on-black, to really shake the pixels up. * feat: driver for display HINK_E042A87 As of Feb. 2025, these panels are used for "WeActStudio 4.2in B&W" display modules. * fix: inkhud rotation should default to 0 * Revert "chore: todo.txt" This reverts commit bea7df44a7. * fix: more generous timeout for display updates Previously this was tied to the expected duration of the update, but this didn't account for any delay if our polling thread got held up by an unrelated firmware task. * fix: don't use the full shutdown screen during reboot * fix: cooldown period during the display shutdown display sequence Observed to prevent border pixels from being locked in place with some residual charge?	2025-03-31 09:17:24 +02:00
Andrew Yong	95523a9659	Fix: Update xiao_ble E22-900M30S regulatory gain to 7 dB (#6466) ... Allow 3 dBm increase in power from previous value of 10 dB gain, based on actual measurements from https://github.com/S5NC/EBYTE_ESP32-S3/blob/main/E22-900M30S%20power%20output%20testing.txt Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-03-30 19:21:47 -05:00
Thomas Göttgens	ea9485657e	Speed up builds by referencing github zips for shallow checkouts (#6441) ... * Speed up builds by referencing github zips for shallow checkouts * sadly the zips don't include submodules OR submodule metadata	2025-03-29 06:19:05 -05:00
Thomas Göttgens	6c7c0770f9	add ThinkNode M2 Support (#6354) ... * [WIP] Base firmware pending support for 2nd button * Update button behaviour. Still WIP * [WIP] Base firmware pending support for 2nd button * Update button behaviour. Still WIP * change env to lowercase Co-authored-by: rcarteraz <robert.l.carter2@gmail.com> * yea - well - what else is new? * fix secondary button behavior and update trunk --------- Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-28 19:55:00 -05:00
Thomas Göttgens	4a12b4eb32	add Thinknode-M1 (#6435) ... * ThinkNode M1 * Update Epaper Driver * Your day isn't complete unless trunk has complained about your formatting at least once.	2025-03-28 21:22:17 +01:00
Manuel	a2387c79ee	fix: SenseCAP Indicator sporadic touch crash (#6432) ... * fix indicator touch crash * replace wrong .ini * delete wrong .ini	2025-03-28 10:18:47 -05:00
Austin	769f0623be	Fix: T-Watch-S3 has 8MB Flash (#6407)	2025-03-27 07:46:16 -05:00
Mark Trevor Birss	6c17694b64	CrowPanel e-Ink Updates for 4.2 and 2.9 inch (#6401) ... * Update platformio.ini * Update EInkDisplay2.cpp * Update EInkDisplay2.h	2025-03-27 11:06:41 +02:00
nledevil	53a7afff41	Adding Variants for Hackerboxes ESP32C3 OLED kit and the ESP32 IO Kit (#6319)	2025-03-25 22:57:06 +01:00
Manuel	e9d8a3d7f9	MUI: increase stack, cache and drawbuffer (#6389) ... * increase stack, cache and drawbuffer * bump device-ui lib * T-Deck map: switch to full redraw	2025-03-24 19:30:17 -05:00
Thomas Göttgens	0951fdd49b	Add support for Heltec HRI-3621 industrial sensor hub (#6366)	2025-03-21 16:12:49 +01:00
Thomas Göttgens	848a3ed6a1	implement littlefs for stm32 (#5987) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Daniel Peter Chokola <dan.chokola@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-03-21 16:12:27 +01:00
Austin	46235f6f8b	RP2xx0: Add UDP Multicast support (#6327)	2025-03-20 08:49:28 -05:00
Austin	6673cb9292	Increase MAX_NUM_NODES on high-flash ESP32_S3 (#6311)	2025-03-18 20:19:51 -05:00
Thomas Göttgens	2d565c2921	trunk'd	2025-03-16 16:18:12 +01:00
dylanli	64b9cfe199	update seeed-xiao-nrf52840-kit board defination (#6318) ... - Due to the lack of pins, we have temporarily removed the button. There are some technical solutions that can solve this problem, and we are currently exploring and researching them	2025-03-16 16:04:24 +01:00
Thomas Göttgens	1640fb105d	new device: Lilygo T-Eth-Elite (#6321)	2025-03-15 14:15:35 +01:00
Thomas Göttgens	79233fe99d	mainline tlora v3 (#6322)	2025-03-15 11:30:58 +01:00
Mark Trevor Birss	e9effb9fff	Update platformio.ini (#6286)	2025-03-11 15:45:20 +02:00
Mark Trevor Birss	cb6dfb66d2	Update ME25LS01/MS24SF1 comment out upload port (#6285) ... * Update platformio.ini * Update platformio.ini * Update platformio.ini	2025-03-11 14:56:12 +02:00
Manuel	7c3eddebc2	device-ui: exFat support (#6279)	2025-03-10 16:42:29 -05:00
Austin	16a0dce83c	Ebyte E77 (STM32) DevKit support (#6255)	2025-03-07 17:37:54 -06:00
Mark Trevor Birss	60e46cd765	Update platformio.ini (#6245)	2025-03-07 14:21:06 +08:00
Mark Trevor Birss	f6a9e7d741	Add initial support for CrowPanel ESP32 5.79” E-paper HMI (#6233)	2025-03-06 11:28:43 +01:00
todd-herbert	e6a98b1d6b	InkHUD refactoring (#6216) ... * chore: todo.txt * chore: comments * fix: no fast refresh on VME290 Reverts a line of code which was accidentally committed * refactor: god class Divide the behavior from the old WindowManager class into several subclasses which each have a clear role. * refactor: cppcheck medium warnings Enough to pass github CI for now * refactor: updateType selection * refactor: don't use a setter for the shared AppletFonts * fix: update prioritization forceUpdate calls weren't being prioritized * refactor: remove unhelpful logging getTimeString is used for parsing our own time, but also the timestamps of messages. The "one time only" log printing will likely fire in unhelpful situations. * fix: " " * refactor: get rid of types.h file for enums * Keep that sneaky todo file out of commits	2025-03-06 11:25:41 +01:00
Ben Meadors	6c8058e1d8	Update SEEED_XIAO_NRF52840_KIT (#6239)	2025-03-06 09:44:22 +08:00
dylanli	445efe9e21	Add support for seeed_xiao_nrf52840_kit (#6231) ... * add support for seeed_xiao_nrf52840_kit * Update platformio.ini remove board level define	2025-03-05 16:22:25 -06:00
Austin	b96b027926	Consume device-ui as a pio library (#6193)	2025-03-05 16:19:59 -06:00
Mictronics	f0f2cd0e0e	RAK11310 Fix build with latest Arduino framework (#6227)	2025-03-04 21:39:10 +01:00
Matt Andreko	fdbadc992c	Enable GPS functionality for RAK4631_eth_gw variant (#6229)	2025-03-04 21:27:57 +01:00
Thomas Göttgens	6715662281	don't build the niche* stuff for non-inkHUD builds. (#6217)	2025-03-03 09:10:47 -06:00
Mictronics	b6562e175f	RAK11310 support for RAK12002 RTC added. (#6210)	2025-03-03 11:08:02 +01:00
Mictronics	43a6e711da	RAK11310: Update to last building platform package and possibly fix for #5361 (#6202)	2025-03-02 13:15:30 +01:00
Ben Meadors	5c8f1fb46b	Enable external (UART) GPS support on WM1110 tracker dev board (#6189)	2025-03-01 08:27:43 -06:00
Ben Meadors	99d3e5eb70	2.6 changes (#5806) ... * 2.6 protos * [create-pull-request] automated change (#5789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Hello world support for UDP broadcasts over the LAN on ESP32 (#5779) * UDP local area network meshing on ESP32 * Logs * Comment * Update UdpMulticastThread.h * Changes * Only use router->send * Make NodeDatabase (and file) independent of DeviceState (#5813) * Make NodeDatabase (and file) independent of DeviceState * 70 * Remove logging statement no longer needed * Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772) * File system persistence fixes * [create-pull-request] automated change (#6000) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update ref * Back to 80 * [create-pull-request] automated change (#6002) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * 2.6 <- Next hop router (#6005) * Initial version of NextHopRouter * Set original hop limit in header flags * Short-circuit to FloodingRouter for broadcasts * If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter * Set last byte to 0xFF if it ended at 0x00 As per an idea of @S5NC * Also update next-hop based on received DM for us * temp * Add 1 retransmission for intermediate hops when using NextHopRouter * Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback * Update protos, store multiple relayers * Remove next-hop update logic from NeighborInfoModule * Fix retransmissions * Improve ACKs for repeated packets and responses * Stop retransmission even if there's not relay node * Revert perhapsRebroadcast() * Remove relayer if we cancel a transmission * Better checking for fallback to flooding * Fix newlines in traceroute print logs * Stop retransmission for original packet * Use relayID * Also when want_ack is set, we should try to retransmit * Fix cppcheck error * Fix 'router' not in scope error * Fix another cppcheck error * Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK Also check for broadcast in `getNextHop()` * Formatting and correct NUM_RETRANSMISSIONS * Update protos * Start retransmissions in NextHopRouter if ReliableRouter didn't do it * Handle repeated/fallback to flooding packets properly First check if it's not still in the TxQueue * Guard against clients setting `next_hop`/`relay_node` * Don't cancel relay if we were the assigned next-hop * Replies (e.g. tapback emoji) are also a valid confirmation of receipt --------- Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> * fix "native" compiler errors/warnings NodeDB.h * fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259) * lib update: light theme * fix merge issue * lib update: home buttons + button try-fix * lib update: icon color fix * lib update: fix instability/crash on notification * update lib: timezone * timezone label * lib update: fix set owner * fix spiLock in RadioLibInterface * add picomputer tft build * picomputer build * fix compiler error std::find() * fix merge * lib update: theme runtime config * lib update: packet logger + T-Deck Plus * lib update: mesh detector * lib update: fix brightness & trackball crash * try-fix less paranoia * sensecap indicator updates * lib update: indicator fix * lib update: statistic & some fixes * lib-update: other T-Deck touch driver * use custom touch driver for Indicator * lower tft task prio * prepare LVGL ST7789 driver * lib update: try-fix audio * Drop received packets from self * Additional decoded packet ignores * Honor flip & color for Heltec T114 and T190 (#4786) * Honor TFT_MESH color if defined for Heltec T114 or T190 * Temporary: point lib_deps at fork of Heltec's ST7789 library For demo only, until ST7789 is merged * Update lib_deps; tidy preprocessor logic * Download debian files after firmware zip * set title for protobufs bump PR (#4792) * set title for version bump PR (#4791) * Enable Dependabot * chore: trunk fmt * fix dependabot syntax (#4795) * fix dependabot syntax * Update dependabot.yml * Update dependabot.yml * Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797) * Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800) * Actions: Semgrep Images have moved from returntocorp to semgrep (#4774) https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved! Official Docker images for Semgrep now available at semgrep/semgrep." Patch updates our CI workflow for these images. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Bump meshtestic from `31ee3d9` to `37245b3` (#4799) Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`. - [Commits](31ee3d90c8...37245b3d61) --- updated-dependencies: - dependency-name: meshtestic dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * [create-pull-request] automated change (#4789) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798) Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4. - [Release notes](https://github.com/pnpm/action-setup/releases) - [Commits](https://github.com/pnpm/action-setup/compare/v2...v4) --- updated-dependencies: - dependency-name: pnpm/action-setup dependency-type: direct:production update-type: version-update:semver-major ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Raspberry Pico2 - needs protos * Re-order doDeepSleep (#4802) Make sure PMU sleep takes place before I2C ends * [create-pull-request] automated change * heltec-wireless-bridge requires Proto PR first * feat: trigger class update when protobufs are changed * meshtastic/ is a test suite; protobufs/ contains protobufs; * Update platform-native to pick up portduino crash fix (#4807) * Hopefully extract and commit to meshtastic.github.io * CI fixes * [Board] DIY "t-energy-s3_e22" (#4782) * New variant "t-energy-s3_e22" - Lilygo T-Energy-S3 - NanoVHF "Mesh-v1.06-TTGO-T18" board - Ebyte E22 Series * add board_level = extra * Update variant.h --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> * Consolidate variant build steps (#4806) * poc: consolidate variant build steps * use build-variant action * only checkout once and clean up after run * Revert "Consolidate variant build steps (#4806)" (#4816) This reverts commit 9f8d86cb25. * Make Ublox code more readable (#4727) * Simplify Ublox code Ublox comes in a myriad of versions and settings. Presently our configuration code does a lot of branching based on versions being or not being present. This patch adds version detection earlier in the piece and branches on the set gnssModel instead to create separate setup methods for Ublox 6, Ublox 7/8/9, and Ublox10. Additionally, adds a macro to make the code much shorter and more readable. * Make trunk happy * Make trunk happy --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Consider the LoRa header when checking packet length * Minor fix (#4666) * Minor fixes It turns out setting a map value with the index notation causes an lookup that can be avoided with emplace. Apply this to one line in the StoreForward module. Fix also Cppcheck-determined highly minor performance increase by passing gpiochipname as a const reference :) The amount of cycles used on this laptop while learning about these callouts from cppcheck is unlikely to ever be more than the cycles saved by the fixes ;) * Update PortduinoGlue.cpp * Revert "Update classes on protobufs update" (#4824) * Revert "Update classes on protobufs update" * remove quotes to fix trunk. --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Implement optional second I2C bus for NRF52840 Enabled at compile-time if WIRE_INFERFACES_COUNT defined as 2 * Add I2C bus to Heltec T114 header pins SDA: P0.13 SCL: P0.16 Uses bus 1, leaving bus 0 routed to the unpopulated footprint for the RTC (general future-proofing) * Tidier macros * Swap SDA and SCL SDA=P0.16, SCL=P0.13 * Refactor and consolidate time window logic (#4826) * Refactor and consolidate windowing logic * Trunk * Fixes * More * Fix braces and remove unused now variables. There was a brace in src/mesh/RadioLibInterface.cpp that was breaking compile on some architectures. Additionally, there were some brace errors in src/modules/Telemetry/AirQualityTelemetry.cpp src/modules/Telemetry/EnvironmentTelemetry.cpp src/mesh/wifi/WiFiAPClient.cpp Move throttle include in WifiAPClient.cpp to top. Add Default.h to sleep.cpp rest of files just remove unused now variables. * Remove a couple more meows --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * Rename message length headers and set payload max to 255 (#4827) * Rename message length headers and set payload max to 255 * Add MESHTASTIC_PKC_OVERHEAD * compare to MESHTASTIC_HEADER_LENGTH --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> * Check for null before printing debug (#4835) * fix merge * try-fix crash * lib update: fix neighbors * fix GPIO0 mode after I2S audio * lib update: audio fix * lib update: fixes and improvements * extra * added ILI9342 (from master) * device-ui persistency * review update * fix request, add handled * fix merge issue * fix merge issue * remove newline * remove newlines from debug log * playing with locks; but needs more testing * diy mesh-tab initial files * board definition for mesh-tab (not yet used) * use DISPLAY_SET_RESOLUTION to avoid hw dependency in code * no telemetry for Indicator * 16MB partition for Indicator * 8MB partition for Indicator * stability: add SPI lock before saving via littleFS * dummy for config transfer (#5154) * update indicator (due to compile and linker errors) * remove faulty partition line * fix missing include * update indicator board * update mesh-tab ILI9143 TFT * fix naming * mesh-tab targets * try: disable duplicate locks * fix nodeDB erase loop when free mem returns invalid value (0, -1). * upgrade toolchain for nrf52 to gcc 9.3.1 * try-fix (workaround) T-Deck audio crash * update mesh-tab tft configs * set T-Deck audio to unused 48 (mem mclk) * swap mclk to gpio 21 * update meshtab voltage divider * update mesh-tab ini * Fixed the issue that indicator device uploads via rp2040 serial port in some cases. * Fixed the issue that the touch I2C address definition was not effective. * Fixed the issue that the wifi configuration saved to RAM did not take effect. * rotation fix; added ST7789 3.2" display * dreamcatcher: assign GPIO44 to audio mclk * mesh-tab touch updates * add mesh-tab powersave as default * fix DIO1 wakeup * mesh-tab: enable alert message menu * Streamline board definitions for first tech preview. (#5390) * Streamline board definitions for first tech preview. TBD: Indicator Support * add point-of-checkin * use board/unphone.json --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> * fix native targets * add RadioLib debugging options for (T-Deck) * fix T-Deck build * fix native tft targets for rpi * remove wrong debug defines * t-deck-tft button is handled in device-ui * disable default lightsleep for indicator * Windows Support - Trunk and Platformio (#5397) * Add support for GPG * Add usb device support * Add trunk.io to devcontainer * Trunk things * trunk fmt * formatting * fix trivy/DS002, checkov/CKV_DOCKER_3 * hide docker extension popup * fix trivy/DS026, checkov/CKV_DOCKER_2 * fix radioLib warnings for T-Deck target * wake screen with button only * use custom touch driver * define wake button for unphone * use board definition for mesh-tab * mesh-tab rotation upside-down * update platform native * use MESH_TAB hardware model definition * radioLib update (fix crash/assert) * reference seeed indicator fix commit arduino-esp32 * Remove unneeded file change :) * disable serial module and tcp socket api for standalone devices (#5591) * disable serial module and tcp socket api for standalone devices * just disable webserver, leave wifi available * disable socket api * mesh-tab: lower I2C touch frequency * log error when packet queue is full * add more locking for shared SPI devices (#5595) * add more locking for shared SPI devices * call initSPI before the lock is used * remove old one * don't double lock * Add missing unlock * More missing unlocks * Add locks to SafeFile, remove from `readcb`, introduce some LockGuards * fix lock in setupSDCard() * pull radiolib trunk with SPI-CS fixes * change ContentHandler to Constructor type locks, where applicable --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> * T-Deck: revert back to lovyanGFX touch driver * T-Deck: increase allocated PSRAM by 50% * mesh-tab: streamline target definitions * update RadioLib 7.1.2 * mesh-tab: fix touch rotation 4.0 inch display * Mesh-Tab platformio: 4.0inch: increase SPI frequency to max * mesh-tab: fix rotation for 3.5 IPS capacitive display * mesh-tab: fix rotation for 3.2 IPS capacitive display * restructure device-ui library into sub-directories * preparations for generic DisplayDriverFactory * T-Deck: increase LVGL memory size * update lib * trunk fmt --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> * Version this * Update platformio.ini (#6006) * tested higher speed and it works * Un-extra * Add -tft environments to the ci matrix * Exclude unphone tft for now. Something is wonky * fixed Indicator touch issue (causing IO expander issues), added more RAM * update lib * fixed Indicator touch issue (causing IO expander issues), added more RAM (#6013) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * update device-ui lib * Fix T-Deck SD card detection (#6023) * increase T-Deck PSRAM to avoid too early out-of-memory when messages fill up the storage * fix SDCard for T-Deck; allow SPI frequency config * meshtasticd: Add X11 480x480 preset (#6020) * Littlefs per device * 2.6 update * [create-pull-request] automated change (#6037) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * InkHUD UI for E-Ink (#6034) * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * InkHUD: initial commit (WIP) Publicly discloses the current work in progress. Not ready for use. * feat: battery icon * chore: implement meshtastic/firmware #5454 Clean up some inline functions * feat: menu & settings for "jump to applet" * Remove the beforeRender pattern It hugely complicates things. If we can achieve acceptable performance without it, so much the better. * Remove previous Map Applet Needs re-implementation to work without the beforeRender pattern * refactor: reimplement map applet Doesn't require own position Doesn't require the beforeRender pattern to precalculate; now all-at-once in render Lays groundwork for fixed-size map with custom background image * feat: autoshow Allow user to select which applets (if any) should be automatically brought to foreground when they have new data to display * refactor: tidy-up applet constructors misc. jobs including: - consistent naming - move initializer-list-only constructors to header - give derived applets unique identifiers for MeshModule and OSThread logging * hotfix: autoshow always uses FAST update In future, it *will* often use FAST, but this will be controlled by a WindowManager component which has not yet been written. Hotfixed, in case anybody is attempting to use this development version on their deployed devices. * refactor: bringToForeground no longer requests FAST update In situations where an applet has moved to foreground because of user input, requestUpdate can be manually called, to upgrade to FAST refresh. More permanent solution for #23e1dfc * refactor: extract string storage from ThreadedMessageApplet Separates the code responsible for storing the limited message history, which was previously part of the ThreadedMessageApplet. We're now also using this code to store the "most recent message". Previously, this was stored in the `InkHUD::settings` struct, which was much less space-efficient. We're also now storing the latest DM, laying the foundation for an applet to display only DMs, which will complement the threaded message applet. * fix: text wrapping Attempts to fix a disparity between `Applet::printWrapped` and `Applet::getWrappedTextHeight`, which would occasionally cause a ThreadedMessageApplet message to render "too short", overlapping other text. * fix: purge old constructor This one slipped through the last commit.. * feat: DM Applet Useful in combination with the ThreadedMessageApplets, which don't show DMs * fix: applets shouldn't handle events while deactivated Only one or two applets were actually doing this, but I'm making a habit of having all applets return early from their event handling methods (as good practice), even if those methods are disabled elsewhere (e.g. not observing observable, return false from wantPacket) * refactor: allow requesting update without requesting autoshow Some applets may want to redraw, if they are displayed, but not feel the information is worth being brought to foreground for. Example: ActiveNodesApplet, when purging old nodes from list. * feat: custom "Recently Active" duration Allows users to tailor how long nodes will appear in the "Recents" applets, to suit the activity level of their mesh. * refactor: rename some applets * fix: autoshow * fix: getWrappedTextHeight Remove the "simulate" option from printWrapped; too hard to keep inline with genuine printing (because of AdafruitGFX Fonts' xAdvance, mabye?). Instead of simulating, we printWrapped as normal, and discard pixel output by setting crop. Both methods are similarly inefficient, apparently. * fix: text wrapping in ThreadedMessageApplet Wrong arguments were passed to Applet::printWrapped * feat: notifications for text messages Only shown if current applet does not already display the same info. Autoshow takes priority over notifications, if both would be used to display the same info. * feat: optimize FAST vs FULL updates New UpdateMediator class counts the number of each update type, and suggets which one to use, if the code doesn't already have an explicit prefence. Also performs "maintenance refreshes" unprovoked if display is not given an opportunity to before a FULL refresh through organic use. * chore: update todo list * fix: rare lock-up of buttons * refactor: backlight Replaces the initial proof-of-concept frontlight code for T-Echo Presses less than 5 seconds momentarily illuminate the display Presses longer than 5 seconds latch the light, requiring another tap to disable If user has previously removed the T-Echo's capacitive touch button (some DIY projects), the light is controlled by the on-screen menu. This fallback is used by all T-Echo devices, until a press of the capacitive touch button is detected. * feat: change tile with aux button Applied to VM-E290. Working as is, but a refactor of WindowManager::render is expected shortly, which will also tidy code from this push. * fix: specify out-of-the-box tile assignments Prevents placeholder applet showing on initial boot, for devices which use a mult-tile layout by default (VM-E290) * fix: verify settings version when loading * fix: wrong settings version * refactor: remove unimplemented argument from requestUpdate Specified whether or not to update "async", however the implementation was slightly broken, Applet::requestUpdate is only handled next time WindowManager::runOnce is called. This didn't allow code to actually await an update, which was misleading. * refactor: renaming Applet::render becomes Applet::onRender. Tile::displayedApplet becomes Tile::assignedApplet. New onRender method name allows us to move some of the pre and post render code from WindowManager into new Applet::render method, which will call onRender for us. * refactor: rendering Bit of a tidy-up. No intended change in behavior. * fix: optimize refresh times Shorter wait between retrying update if display was previously busy. Set anticipated update durations closer to observed values. No signifacant performance increase, but does decrease the amount of polling required. * feat: blocking update for E-Ink Option to wait for display update to complete before proceeding. Important when shutting down the device. * refactor: allow system applets to lock rendering Temporarily prevents other applets from rendering. * feat: boot and shutdown screens * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: Bluetooth pairing screen * fix: InkHUD defaults not honored * fix: random Bluetooth pin for NicheGraphics UIs * chore: button interrupts tested * fix: emoji reactions show as blank messages * fix: autoshow and notification triggered by outgoing message * feat: save InkHUD data before reboot Implemented with a new Observable. Previously, config and a few recent messages were saved on shutdown. These were lost if the device rebooted, for example when firmware settings were changed by a client. Now, the InkHUD config and recent messages saved on reboot, the same as during an intentional shutdown. * feat: imperial distances Controlled by the config.display.units setting * fix: hide features which are not yet implemented * refactor: faster rendering Previously, only tiles which requested update were re-rendered. Affected tiles had their region blanked before render, pixel by pixel. Benchmarking revealed that it is significantly faster to memset the framebuffer and redraw all tiles. * refactor: tile ownership Tiles and Applets now maintain a reciprocal link, which is enforced by asserts. Less confusing than the old situation, where an applet and a tile may disagree on their relationship. Empty tiles are now identified by a nullptr *Applet, instead of by having the placeholderApplet assigned. * fix: notifications and battery when menu open Do render notifications in front of menu; don't render battery icon in front of menu. * fix: simpler defaults Don't expose new users to multiplexed applets straight away: make them enable the feature for themselves. * fix: Inputs::TwoButton interrupts, when only one button in use * fix: ensure display update is complete when ESP32 enters light sleep Many panels power down automatically, but some require active intervention from us. If light sleep (ESP32) occurs during a display update, these panels could potentially remain powered on, applying voltage the pixels for an extended period of time, and potentially damaging the display. * fix: honor per-variant user tile limit Set as the default value for InkHUD::settings.userTiles.maxCount in nicheGraphics.h * feat: initial InkHUD support for Wireless Paper v1.1 and VM-E213 * refactor: Heard and Recents Applets Tidier code, significant speed boost. Possibly no noticable change in responsiveness, but rendering now spends much less time blocking execution, which is important for correction functioning of the other firmware components. * refactor: use a common pio base config Easier to make any future PlatformIO config changes * feat: tips Show information that we think the user might find helpful. Some info shown first boot only. Other info shown when / if relevant. * fix: text wrapping for '\n' Previously, the newline was honored, but the adojining word was not printed. * Decouple ButtonThread from sleep.cpp Reorganize sleep observables. Don't call ButtonThread methods inside doLightSleep. Instead, handle in class with new lightsleep Observables. * feat: BluetoothStatus Adds a meshtastic::Status object which exposes the state of the Bluetooth connection. Intends to allow decoupling of UI code. * feat: observable for reboot * refactor: Heltec VM-E290 installDefaultConfig * fix: random Bluetooth pin for NicheGraphics UIs * update device-ui: fix touch/crash issue while light sleep * Collect inkhud * fix: InkHUD shouldn't nag about timezone (#6040) * Guard eink drivers w/ MESHTASTIC_INCLUDE_NICHE_GRAPHICS * Case sensitive perhaps? * More case-sensitivity instances * Moar * RTC * Yet another case issue! * Sigh... * MUI: BT programming mode (#6046) * allow BT connection with disabled MUI * Update device-ui --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * MUI: fix nag timeout, disable BT programming mode for native (#6052) * allow BT connection with disabled MUI * Update device-ui * MUI: fix nag timeout default and remove programming mode for native --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * remove debuglog leftover * Wireless Paper: remove stray board_level = extra (#6060) Makes sure the InkHUD version gets build into the release zip * Fixed persistence stragglers from NodeDB / Device State divorce (#6059) * Increase `MAX_THREADS` for InkHUD variants with WiFi (#6064) * Licensed usage compliance (#6047) * Prevent psk and legacy admin channel on licensed mode * Move it * Consolidate warning strings * More holes * Device UI submodule bump * Prevent licensed users from rebroadcasting unlicensed traffic (#6068) * Prevent licensed users from rebroadcasting unlicensed traffic * Added method and enum to make user license status more clear * MUI: move UI initialization out of main.cpp and adding lightsleep observer + mutex (#6078) * added device-ui to lightSleep observers for handling graceful sleep; refactoring main.cpp * bump lib version * Update device-ui * unPhone TFT: include into build, enable SD card, increase PSRAM (#6082) * unPhone-tft: include into build, enable SD card, increase assigned PSRAM * lib update * Backup / migrate pub private keys when upgrading to new files in 2.6 (#6096) * Save a backup of pub/private keys before factory reset * Fix licensed mode warning * Unlock spi on else file doesn't exist * Update device-ui * Update protos and device-ui * [create-pull-request] automated change (#6129) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Proto * [create-pull-request] automated change (#6131) * Proto update for backup * [create-pull-request] automated change (#6133) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Update protobufs * Space * [create-pull-request] automated change (#6144) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Protos * [create-pull-request] automated change (#6152) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Updeet * device-ui lib update * fix channel OK button * device-lib update: fix settings panel -> no scrolling * device-ui lib: last minute update * defined(SENSECAP_INDICATOR) * MUI hot-fix pub/priv keys * MUI hot-fix username dialog * MUI: BT programming mode button * Update protobufs --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Jason Murray <15822260+scruplelesswizard@users.noreply.github.com> Co-authored-by: Jason Murray <jason@chaosaffe.io> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: virgil <virgil.wang.cj@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Kalle Lilja <15094562+ThatKalle@users.noreply.github.com> Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-01 06:18:33 -06:00
Austin	4e575872da	junk in the Trunk (#6149)	2025-02-25 16:41:45 +08:00
GUVWAF	cfcd9cc210	Revert "Rak4631 remove spi1 (#6042)" (#6121) ... This reverts commit 9b46cb4ef0.	2025-02-22 08:03:05 -06:00
Tom Fifield	ec0eafedab	Move variant-specific lines back to variant (#6044) ... Last release a change introduced different branching functions in gps.cpp based on the model of a device. This makes the code less readable and introduces the potential for bugs. This patch creates a new variable, GPS_PROBETRIES that can be set in variant.h of devices that will control how many times we will probe for GPS presence. It sets up the T1000-E to use this variable and cleans the code in gps.c	2025-02-20 07:48:37 -06:00
Mictronics	9930bba3f5	Add Pico2W variant including Wifi support. (#6062)	2025-02-20 10:56:34 +01:00
Austin	f1dc1b309a	PIO: Cleanup dependency naming (#6090)	2025-02-19 18:14:54 -06:00
Sebastian Muszynski	bb73555209	Expose INA219 measurement as battery voltage for Seeed Xiao ESP32S3 (#6070) ... * Expose INA219 measurement as battery voltage for Seeed Xiao ESP32S3 * Define BATTERY_PIN and don't block a random GPIO	2025-02-19 06:36:59 -06:00