875 Commits

Author	SHA1	Message	Date
Jonathan Bennett	4feaec651f	Unify the native display config between legacy display and MUI (#6838) ... * Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-21 06:36:04 -05:00
Andrew Yong	82b7cb5dd0	fix(xiao_ble): Typo preventing SX1262 init (SX126X_CS gets stuck) (#7094) ... Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-21 06:17:46 -05:00
Andrew Yong	58743021c8	XIAO BLE cleanup (supporting changes to seeed_xiao_nrf52840_kit too) (#7024) ... * chore(seeed_xiao_nrf52840_kit): Use build flag for L76K GNSS, rename variant.h ifdef Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Support multiple SX126x pinouts via build flags Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Pin D0 as user button if pin is unused Signed-off-by: Andrew Yong <me@ndoo.sg> * feat: EBYTE E22 and NiceRF gain and SX1262 max power defines Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(xiao_ble): Move variant to DIY and extend from seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Pin D6, D7 as I2C SDA, SCL if pins are unused Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-19 18:51:33 -05:00
Justin E. Mann	2fb46ce5d5	Add rak12035 VB Soil Monitor Tested & Working (#6741) ... * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * Update to 1.0.4 release of RAK12035_SoilMoisture * cleanup * cool * . * .. * little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500 looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500. improvements could be made around the configuration of the monitor. next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity. * . comments about current limitations and TODOs * trunk update * trying to autoformat.. * fix formatting attempt 2 * .. * ... * ... * . * some corrections and local build success * correction in temp code * grr formatting * cleanup after a few experiments * remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos. * update some values in varient for rak wistap * working out trunk formatting.. * wip . corrections to other build variants * . * protobuffs? * protobufs? * Update protobufs ref * Protobufs ref * Trunk * Update RAK12035Sensor.cpp * Fmt * comment changes * dumb mistakes... resolved, actually built and tested.. all good.. * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * . proto submod * proto * proto * merge master * mabe a fix for GPS pin conflict, waiting on a new gps module to try * merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035 * . * . --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-19 18:51:03 -05:00
Hannes Fuchs	2c206febab	Fix nugget s3 lora variant issues (#7070) ... * Fix serial communication for nugget s3 lora Without setting `ARDUINO_USB_CDC_ON_BOOT=1` the serial interface on the nugget s3 lora board does not work. * Fix nugget s3 lora variant definitions	2025-06-19 18:48:22 -05:00
dylanliacc	afcd97c154	trunk fmt	2025-06-16 16:16:14 -05:00
Dylanliacc	cbdd7eae70	fix IIC port	2025-06-16 16:15:59 -05:00
Taha	bd0e25f3f5	Fix Critical Error #3 for LilyGo T-Echo (#6791) ... * Fix Critical Error #3 * clang format	2025-06-16 13:32:28 +10:00
Jonathan Bennett	8a8a7cdefc	cppcheck-supress to ignore intentional error	2025-06-15 16:37:19 -05:00
Andy Shinn	f1dd623ce9	allow overriding INA3221 channels (#7035) ... Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-06-15 07:39:49 -05:00
todd-herbert	425f384b1f	InkHUD DIY builds for ProMicro & Heltec T114 (#7039) ... * DIY InkHUD variants (ProMicro & T114) * Fix file encoding > We’ve detected the file encoding as ISO-8859-1. When you commit changes we will transcode it to UTF-8. * Update comment justifying trunk suppression	2025-06-15 09:39:46 +10:00
Ben Meadors	cc0fbfbd21	Fixed breaking of inkhud / tft suffix convention	2025-06-13 06:59:05 -05:00
Csrutil	5d0bf03b01	add support for GAT562 Mesh Trial Tracker (#6984) ... * add support for GAT562 Mesh Trial Tracker * Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER * Added RAK4630 for led pin 2 (blue) * Added RAK4630 for led pin 2 (blue) comment * don't touch src/mesh/NodeDB.cpp * set fixed baudrate for gat562_mesh_trial_tracker * adjust the order of the HW_VENDOR defines --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-13 17:27:48 +10:00
Tom Fifield	8557bd031d	Remove GPS Baudrate locking for Seeed Xiao NRF52840 Kit (#7016) ... The Seeed Xiao NRF52840 Kit's default GPS is an L76K which operates at 9600 baud, so when this variant was defined that baud rate was specified. However, this is a development board and it is expected that users can attach their own devices. This includes GPS, which may operate at a different baud rate. The current fixed baud rate prevents this, so this patch removes that setting. This will revert to the regular automatic probe method. This will sucessfully detect the L76K as before (probably the same as before since 9600 baud is the first baud rate checked), but also allow other GPSes at other baud rates to be detected. Fixes https://github.com/meshtastic/firmware/issues/7012 Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-12 19:56:40 -05:00
Ben Meadors	60ec05e536	elecrow-adv-35-tft	2025-06-11 10:54:08 -05:00
Ben Meadors	730cd388d6	Fix pio	2025-06-11 08:49:20 -05:00
Ben Meadors	6549b0477c	Missed a spot	2025-06-11 06:10:34 -05:00
Ben Meadors	8304cae010	Fix issue with CI not picking up elecrow panels due to confusing env	2025-06-11 06:09:25 -05:00
Andreas 'count' Kotes	c6c2a4d4dd	Improve support for Heltec Wireless Bridge (#6647) ... * Use BLE_LED where present for CONNECTED/DISCONNECTED * Use WIFI_LED where present for WiFi started/stopped (as AP) or connected/disconnected (as Station) * improve support for Heltec Wireless Bridge * satisfy 'trunk fmt'	2025-06-10 13:54:07 +10:00
Clément Hampaï	1eacdd0629	[Variant] nomadstar meteor pro (#6742) ... * Initial support for NomadStar Meteor Pro * Cleaned up Platformio variant comments * Removed RTC & ETH deps. * Removed RGB NCP5623 deps, Enabled AmbientLight by default * Added HWID mapping * Updated Armduino-Semihosting lib dep with archived version. * Fixed trunk linting in AmbientLightingThread.h and hydra variant	2025-06-10 07:48:52 +10:00
Manuel	7924ef87b5	enable custom driver (#6988) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-09 05:41:41 -05:00
Tom	15d2ae17f8	Add note to hydra to note that the button pin has no pull-up (#6979) ... Add note to hydra to note that the button pin has no pull-up. Use an external resistor or remove the `#define`.	2025-06-07 06:55:58 -05:00
Andrew Yong	070deb290f	seeed_xiao_nrf52840_kit improvements (#6930) ... * feat: seeed_xiao_nrf52840_kit improvements - LEDs: - Change RGB LED to be active low as it is common anode - Remove re-definition of LED_PIN - Use red LED to indicate flash writes - Use blue LED as user LED (External Notification module) - GPIO: Re-word unused BUTTON_PIN comment - Wire: Set I2C pins to match XIAO nRF52840 Sense's LSM6DS3TR IMU - Battery: - Use charge LED to detect charging state - Move voltage divider boilerplate out of src/main.cpp and into initVariant() - Fix dependencies for above in related XIAO BLE DIY variants Build tested variants: - seeed_xiao_nrf52840_kit - xiao_ble - seeed-xiao-nrf52840-wio-sx1262 Flashed to and tested on hardware: - seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(seeed_xiao_nrf52840_kit): Re-order generic GPIO definitions Signed-off-by: Andrew Yong <me@ndoo.sg> * chore: Use ADC_CTRL for XIAO nRF52840 Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-05 06:45:43 -05:00
Ben Meadors	7a7166d575	Revert "Add a new screen for heltec_wireless_paper. (#6894)" (#6918) ... This reverts commit ba53543354.	2025-05-29 10:17:20 -05:00
Quency-D	ba53543354	Add a new screen for heltec_wireless_paper. (#6894) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:10:25 -05:00
Ben Meadors	7849a3d291	Trunk	2025-05-29 06:35:18 -05:00
dylanli	c0c2ec195f	add support for seeed wio tracker L1 (#6907) ... * add support for seeed wio tracker l1 * add support in nrf52 arch * fix ADC problem and comments incorrect * fix gps wakeup pin * fix gps pin	2025-05-29 06:33:22 -05:00
Thomas Göttgens	96c18d9908	Add LINK32 (Lilygo) Board with Light+Environment sensors (#6899) ... * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Update to real HWID and trunk fmt	2025-05-27 18:11:32 -05:00
Andrew Yong	e29588d2e2	feat(RadioInterface): Tx power gain calculation rework (#6796) ... - Rename REGULATORY_GAIN_LORA to TX_GAIN_LORA - Move gain-based Tx power clamping from RadioInterface::applyModemConfig() to RadioInterface::limitPower() - User-configured Tx power now matches the Tx power out of the device connector - Re-order [LoRa Chip]Interface.cpp limitPower() to take place before the final Tx power clamping so we clamp based on the pre-PA Tx power rather than user-configured Tx power Tested on XIAO BLE variant. Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 06:26:31 -05:00
dylanli	c01db98819	update seeed solar node led pin (#6871)	2025-05-23 08:04:17 -05:00
todd-herbert	ba1ef45024	InkHUD Extended ASCII (#6768) ... * Custom AdafruitGFX fonts with extended ASCII encodings * AppletFont handles re-encoding of UTF-8 text * Manual parsing of text which may contain non-ASCII chars * Display emoji reactions, even when unprintable Important to indicate to users that a message has been received, even if meaning is unclear. * Superstitious shrink_to_fit I don't think these help, but they're not hurting! * Use Windows-1252 fonts by default * Spelling * Tidy up nicheGraphics.h * Documentation * Fix inverted logic Slipped in during a last minute renaming while tidying up to push..	2025-05-22 18:16:53 -05:00
rcarteraz	b1955c34aa	Update Seeed Solar Node (#6763) ... * Update Seeed Solar Node * Update Seeed Solar Node * updates * updates * updates --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-14 06:32:24 -05:00
Richard Zhang	d9ad2322e8	Fixes BUG #6243 Heltec Tracker (#6781) ... * fix wireless tracker screen issues * fix SHTC3 BUG * Remove the 32K crystal oscillator option for the Wireless Paper and Vision Master series. * Correct spelling errors * Update src/graphics/Screen.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 06:29:05 -05:00
Thomas Göttgens	cc66f7c79b	Crowpanel 4.3, 5.0, 7.0 support (#6611) ... * SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-05-13 14:15:52 +02:00
Tom	ca9bf6b31a	Update XIAO_NRF_KIT RXEN Pin definition (#6717) ... The XIAO NRF kit comes with a hat which has a slightly different pinout than the one supplied with the XIAO S3. At the last update, the RXEN pin was not moved with the rest.	2025-05-07 21:20:15 -05:00
Austin	2d6181fca0	update bosch bsec2 (#6727) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-05 06:03:36 -05:00
Manuel	a8ab6e82e6	MUI framebuffer support (#6703) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 20:50:30 -05:00
Colin	72eae42b81	PMSA003I: add support for driving SET pin low while not actively taking a telemetry reading (#6569) ... * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * RAK4631: add PMSA003I_ENABLE_PIN define * fix indentation --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-29 06:31:01 -05:00
todd-herbert	89df9d7686	Fix WiPhone variant.h (#6664)	2025-04-24 20:40:48 -05:00
Manuel	24e9539d40	remove buzzer (#6652)	2025-04-22 06:25:07 -05:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
dylanli	d74359abf0	add support for Seeed solar panel (#6597) ... * add seeed_solar_node * fix RF_SW problem * fix IIC problem * Update Button redefination * Add on-board flash pin defination * fix missing a ',' * update seeed sorlar panel defination * fix word spell * fix upstream change * fix upstream change * fix upstream change * fix formate * Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption * fix led defination conflict * Delete lib/device-ui directory * Restore protobufs submodule --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-04-17 16:11:17 +10:00
Niklas	e0dafc3618	fix: set upload_speed for tlora_v1 (#6601)	2025-04-16 06:15:16 -05:00
Benjamin Kyd	64c8bde04a	Update platformio.ini to exclude unused modules from t1000-e (#6584) ... * Update platformio.ini to exclude unused modules * Add No EXT GPIO flag and also correct some exclusions in main * CANNEDMSG != CANNEDMESSAGES * Remove NO_EXT_GPIO	2025-04-16 10:12:23 +02:00
Niklas	1138f74e2c	fix: set upload_speed for tlora_v1_3 & tlora_v2_1_16 (#6595)	2025-04-15 20:39:13 -05:00
todd-herbert	cf5c8de92e	Fix spurious button presses on some T-Echos (#6590) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-15 20:33:44 -05:00
Tom Fifield	98411d408a	Trunk fixes for heltec mesh pocket. (#6588) ... https://github.com/meshtastic/firmware/pull/6533 was merged without running trunk. This patch fixes the newly introduced trunk errors.	2025-04-15 16:37:09 -05:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
Kevin Jahaziel Leon Morales	7079f538ed	feat: Add Electronic Cats variant for Catsniffer (#6483) ... * feat: Add Electronic Cats variant for catsniffer * fix: Trunk fmt * fix: Variant error	2025-04-11 13:26:30 +02:00
Ken Piper	baa05aacf5	fix: Correct underlying cause of T-Watch not functioning when set to a 16MB filesystem (#6563) ... * Fix maximum flash size in T-Watch S3 board definition * Revert "Fix: T-Watch-S3 has 8MB Flash (#6407)" This reverts commit 769f0623be.	2025-04-11 13:04:37 +02:00