Ben Meadors
568434d0fa
Use preset wiring ( #1845 )
...
* When we init default, set use_preset to true
* Only use modem_preset when we use_preset
* When we init default, set use_preset to true (#1843 ) (#1844 )
2022-10-22 18:51:22 -05:00
Thomas Göttgens
e65d9e8ccd
Add support for SX1281 on 2.4 GHz ( #1809 )
...
* Add support for SX1281 on 2.4 GHz
* only allow wide BW settings when the right chip is detected
* portduino cannot use this chip yet as it uses an old modified version of radiolib
* missed a spot
* Attempt to supress false positive
* Attempt to supress false positive
* Trying casing from the cpp-check manual
* Trying casing from the cpp-check manual
* Inline suppr should be default but...
* Maybe casting it will make the damn thing shut up
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2022-10-17 08:33:41 -05:00
Thomas Göttgens
984f0ca12c
check allowed range for lora.channel_num
2022-10-10 12:28:31 +02:00
Thomas Göttgens
0f7a126828
fix compiler warning
2022-10-04 09:11:24 +02:00
Sacha Weatherstone
4df81008bc
Merge branch 'master' into channel_num
2022-10-03 10:32:56 +10:00
GUVWAF
067bde321b
Remove old SimRadio from RadioInterface
2022-10-01 11:57:27 +02:00
andrekir
8f84d7089c
move channel_num to loraConfig
2022-09-30 17:33:43 -03:00
Ben Meadors
397030b5a6
GPS intervals ( #1693 )
...
* GPS intervals
* Backwards logic
* Oops
2022-09-12 18:07:21 -05:00
Ben Meadors
18f37981bb
Spelling and fixing defaults
2022-09-12 07:55:17 -05:00
Thomas Göttgens
f7b12f0695
Adapt to new protobufs - TODO: factory_reset rewire
2022-09-09 12:51:41 +02:00
Thomas Göttgens
43733ce150
Fix formula to consider Bandwidth in kHz
2022-07-21 10:07:08 +02:00
Jm Casler
62aa740c93
Updated channel selection formula
2022-07-19 07:36:55 -07:00
Shiv Kokroo
d179f02519
Removed comment about frequency hopping
...
Removed comment about frequency hopping due to lack of universal hardware support
2022-07-15 16:37:53 +02:00
Shiv Kokroo
67a7056025
Change page number to section for reference document
2022-07-15 16:37:01 +02:00
Shiv Kokroo
930b023d10
Allow up to 500mW transmission power for EU868 region
...
The European Union regulations clearly state that the power limit for this frequency range is 500 mW, or 27 dBm. goTenna Mesh uses the same frequency range and power limit too.
It also states that we can use interference avoidance and spectrum access techniques to avoid a duty cycle.
It might be worthwhile in the future to implement frequency hopping to avoid duty cycling.
(Please refer to page 69 in the following document)
https://ec.europa.eu/growth/tools-databases/tris/index.cfm/ro/search/?trisaction=search.detail&year=2021&num=528&dLang=EN
2022-07-15 16:06:41 +02:00
Ben Meadors
1efcd5e125
Merge branch 'master' into master
2022-07-02 14:44:40 -05:00
Ben Meadors
4a08f86f96
Oops ( #1545 )
2022-07-02 09:25:01 -05:00
Ben Meadors
3f0ff45232
Node db cleanup and debug prints ( #1543 )
...
* Node db cleanup and debug prints
* File name cleanup
2022-07-02 09:09:41 -05:00
Jm Casler
d81b043f1d
Add ability to adjust frequency by config.lora.frequency_offset
2022-06-25 22:43:13 -07:00
Jm Casler
90baf9d8a0
Fix typo in the modem presets
2022-06-21 19:23:07 -07:00
Thomas Göttgens
4a6cad6e46
Set TX Power to some meaningful value
2022-06-13 23:00:50 +02:00
GUVWAF
a1b07ed6aa
Introduce contention window (CW) ( #1500 )
...
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2022-06-13 08:21:18 -05:00
Jm Casler
94f7e7037d
Merge branch 'compression' into new-compression
2022-05-23 21:18:45 -07:00
Thomas Göttgens
53e9f4df46
Segemented config works for me (TM)
...
Small GPS Fix that cropped up while testing included.
2022-05-21 22:38:33 +02:00
Sacha Weatherstone
8b42b78033
Merge branch 'master' into master
2022-05-08 00:23:18 +10:00
GUVWAF
a7f4263db4
Optimize retransmission timer
...
Based on airtime of packet + transmit, processing and CAD delays
2022-05-07 15:43:35 +02:00
Sacha Weatherstone
6b0ce6b729
Finish config transition
2022-05-07 20:31:21 +10:00
Sacha Weatherstone
ea86f76393
Move LoRa config out of primary channel
2022-05-07 13:34:06 +10:00
Jm Casler
4785367915
Temp work on compression
2022-04-25 08:02:51 -07:00
Jm Casler
e905f15a0f
Added new roles
2022-03-29 22:02:21 -07:00
Jm Casler
3816a2fbe0
Add weighted tx delay for flooding router
2022-03-14 17:47:01 -07:00
Jm Casler
6d4d2bb6fa
Merge branch 'router' of https://github.com/mc-hamster/Meshtastic-device into router
2022-02-28 17:47:11 -08:00
Jm Casler
32ef354c22
Add rssi to printPacket
2022-02-28 17:47:09 -08:00
puzzled-pancake
91b0fcb257
Added comments on ANZ added 1w limit
...
Added comments
https://iotalliance.org.nz/wp-content/uploads/sites/4/2019/05/IoT-Spectrum-in-NZ-Briefing-Paper.pdf
https://www.iot.org.au/wp/wp-content/uploads/2016/12/IoTSpectrumFactSheet.pdf
As noted 1w limit on both
2022-02-28 10:39:48 +13:00
puzzled-pancake
9b44d2e999
Update RadioInterface.cpp
2022-02-27 18:12:27 +13:00
puzzled-pancake
f9bcddafef
Update RadioInterface.cpp
2022-02-27 17:30:11 +13:00
puzzled-pancake
a25beff241
Update RadioInterface.cpp
2022-02-27 17:29:25 +13:00
puzzled-pancake
f2a31cc678
Update RadioInterface.cpp
...
Add NZ 866
2022-02-27 17:01:25 +13:00
Jm Casler
3a621ef262
Fix bug in frequency formulas
2022-02-15 18:48:54 -08:00
Jm Casler
57bbd912b1
Fix typo in default channel (Thanks Andre!)
2022-02-15 07:36:28 -08:00
Jm Casler
1de086819c
Remove myNodeInfo.num_bands. It's not used by android.
2022-02-14 19:45:26 -08:00
Jm Casler
96b5537217
New bands, new band plans and new channel configurations
2022-02-14 19:32:31 -08:00
Jm Casler
f01952bd0d
Create new default channel configurations. #965
...
Create new default channel configurations. #965
2021-12-06 15:03:35 -08:00
Solanaceae
d5e4ceebcc
Small fix for using 62.5Khz bandwidth setting.
2021-11-01 02:31:53 -07:00
Vladislav Osmanov
bd9bf585d3
save channel & freq before outputting them for debugging
...
The frequency could be overridden in `RadioInterface::getFreq()` for some modules.
2021-09-15 12:09:11 +03:00
Vladislav Osmanov
cb42440963
fix module frequency overriding
...
The `RadioInterface::freq` member was encapsulated with the `RadioInterface::getFreq()` function,
which could be overridden in child classes for some LoRa-modules.
2021-09-13 22:13:51 +03:00
Kevin Hester
17a1262382
pull in new epaper lib (which required importing configuration.h everywhere
...
for dumb reasons)
2021-06-27 10:56:28 -07:00
Kevin Hester
a845406a19
cleanup packet encrypt/descrypt
2021-04-05 09:24:00 +08:00
Kevin Hester
c798c0032c
add frequency_offset
2021-04-02 09:14:12 +08:00
Kevin Hester
b68397a911
fix simradio init to work more like real radios
2021-03-30 23:39:51 +08:00
