We have two perhapsSetRTC functions, which are called to set the time.
The one with 3 parameters had a helpful check to reject an invalid time,
by comparing the time from the source against when the firmware was compiled.
The one with 2 parameters, which is called from the GPS lookForTime did not.
As a result, certain GPS with bad time handling could set a time that was
in the past.
This patch adds the same epoch check code to the other perhapsSetRTC method.
Fixes https://github.com/meshtastic/firmware/issues/7364
* Calculate the length of the right string and use it
* Improve readability of Version Number
* Prevent negative message IDs and proactively favorite DM'd nodes
* Patch up Remove Favorite functionality
* Fix warnings for TFT_MESH_* and hasSupportBrightness
* Fix warning around casting variables
* Correct Favorite Node Behavior to rebuild favorite nodes when updated.
* Resolve bool kb_found issue not working for second discovery keyboards
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Clock updates and some TDeck corrections
* TDeck Brightness Works in TFT Builds
* Remove HAS_TFT from enabling Brightness, disable Brightness for TDeck
* Add default textMessage frame actions and adjust SharedUIDisplay
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* add new platform rak_wismeshtag
* Remove RTC and Ethernet definitions from variant.h
* Remove unused EINK and Ethernet definitions from variant.h and platformio.ini
* Add WISMESH_TAG hardware model definition in architecture.h and update build flags in platformio.ini
* Remove unused build flags and dependencies
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: daniel <daniel.cao@rakwireless.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
The screen of the heltec wireless tracker uses the same power source as the GPS. If the GPS turns off the power during the screen shutdown period and then turns on the power, the screen will not function properly. So initialize the screen every time it starts.
* Enable GPS for Wio-E5 variant on Serial2
* Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it.
* Don't try to send ATAK packets if ATAK is disabled, +4k flash
* No delay between UI frame rendering for OLED
* force redraw the display
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
* feat(display): enable screen wake on received messages
* feat(menu): add Screen Wakeup option in system menu
* feat(ui): update wake on message configuration and refactor save logic
* feat(TextMessageModule): conditionally trigger screen wake on received message
* Refactoring system menu options for notification and screen.
* Fix MUI options in the system menu.
* Build out Reboot/Shutdown Menu and consolidate options within it
* Trunk fixes
* Protobuf ref
* Revert generated files
* Update plumbing for screen_wakeup_menu
* Begin work on crafting a method to stop screen wake for received messages
* SharedUIDisplay.cpp doesn't need ExternalNotificationModule.h
* Stop screen wake if External Notification is enabled
* Removing extra log lines
* Add role and battery state checks for not waking screen. Menu updates to resolve some Back options not being linked
* Resolve some additional merge conflict related issues
* Shouldn't throttle the power menu
* Finalize renames of some menus
* Flip Flop MUI Menu to avoid accidental clicks
* NULL check for powerStatus
* Remove "Wakeup" eNum
* Update src/graphics/Screen.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* CoPilot was close this should fix the builds
---------
Co-authored-by: whywilson <m.tools@qq.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Tests to identify display model
* (InkHUD) SSD1682 controller IC
Has a few quirks, gets its own base class
* (InkHUD) E0213A367 Display
For Heltec Wireless Paper V1.1.1, V1.2
For Heltec VM-E213 V1.1
* (InkHUD) Select display model at boot
* (BaseUI) Wrapper to combine multiple GxEPD2 drivers
Workaround for issue of GxEPD2_BW objects not having a shared base class. Allows us to select a driver at runtime.
https://github.com/meshtastic/firmware/issues/6851#issuecomment-2905353447
* (BaseUI) Select E-Ink model at boot
* (InkHUD) SSD1682 deep sleep
* (InkHUD) No deep sleep for SSD1682
* (InkHUD) Fully no-op deep sleep for SSD1682
As reported by @KZ1R , Kazakhstan has frequencies in use for Lora devices that are not covered by our existing band selections.
This adds
* KZ_433 433.075 - 434.775 MHz <10 mW EIRP, Low Powered Devices (LPD)
* KZ_863 863 - 868 MHz <25 mW EIRP, 500kHz channels allowed, must not be used at airfields
Legal ref provided in https://github.com/meshtastic/firmware/issues/7204 and verified.
https://www.gov.kz/memleket/entities/mdai/press/article/details/6128
Order of the Ministry of Investments and Development of the Republic of Kazakhstan No. 34 dated January 21, 2015.
Published on 01 July 2024 19:03 Updated on 01 July 2024
Fixes https://github.com/meshtastic/firmware/issues/7204
