6030 Commits

Author	SHA1	Message	Date
Clive Blackledge	659e5598f4	Added more logging around packet history, to show where memory is allocated.	2025-10-20 08:26:20 +11:00
Clive Blackledge	66110877e0	Adding PacketRecord to PSRAM as well as part of this change.	2025-10-20 08:26:20 +11:00
Clive Blackledge	05c05accb8	Reduced phone rx backlog to 100 due to slowness of bluetooth	2025-10-20 08:26:20 +11:00
Clive Blackledge	01a848ccaf	Update when and how memory is allocated.	2025-10-20 08:26:20 +11:00
Clive Blackledge	131c949320	Value updates to find the optimum size for memory available.	2025-10-20 08:26:20 +11:00
Clive Blackledge	2e4f1a0216	Add moar stored messages when oflfine as well. Also using psram.	2025-10-20 08:26:20 +11:00
Clive Blackledge	344263de86	Update to include heltec lora32 v4 nodes with 2MB psram	2025-10-20 08:26:20 +11:00
Clive Blackledge	1d896f1bba	Renaming node to coldNode to avoid shadowing.	2025-10-20 08:26:20 +11:00
Clive Blackledge	19d59a116d	Updating to 800 if psram_size is >4MB.	2025-10-20 08:26:20 +11:00
Clive Blackledge	954788a5d5	Initial commit of additional nodes for ESP32S3 chips.	2025-10-20 08:26:20 +11:00
Chloe Bethel	b5aa16bade	Add a banner on startup when DEBUG_MUTE is enabled (#8402)	2025-10-20 08:23:12 +11:00
github-actions[bot]	ffb168be00	Update protobufs (#8398) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-10-19 05:53:06 -05:00
Ben Meadors	27dc3be14a	Merge branch 'develop'	2025-10-19 05:49:50 -05:00
Mike Robbins	f2a63faddd	Fix NimbleBluetooth reliability and performance (#8385) ... * Initial work to get NimbleBluetooth working reliably, and cross-task mutexes cleaned up * Pre-fill toPhoneQueue when safe (during config/nodeinfo): runOnceToPhoneCanPreloadNextPacket * Handle 0-byte responses breaking clients during initial config phases * requestLowerPowerConnection * PhoneAPI: onConfigStart and onConfigComplete callbacks for subclasses * NimbleBluetooth: switch to high-throughput BLE mode during config, then lower-power BLE mode for steady-state * Add some documentation to NimbleBluetooth.cpp * make cppcheck happier * Allow runOnceHandleToPhoneQueue to tell runOnce to shouldBreakAndRetryLater, so we don't busy-loop forever in runOnce * Gating some logging behind DEBUG_NIMBLE_ON_READ_TIMING ifdef again; bump retry count * Add check for connected state in NimBLE onRead() --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-19 05:32:58 -05:00
github-actions[bot]	e1c259ae32	Update protobufs (#8396) ... Co-authored-by: fifieldt <1287116+fifieldt@users.noreply.github.com>	2025-10-18 18:21:24 -05:00
HarukiToreda	b4dea63f44	Gatting off BaseUI code from screenless devices and InkHUD (#8384)	2025-10-19 09:00:35 +11:00
HarukiToreda	30022c9377	Fixe battery voltage to show missing decimals (#8386)	2025-10-19 09:00:14 +11:00
Tom Fifield	0283e0658b	Master --> develop (#8394) ... * Update exempt labels for stale bot workflow Adds triaged and backlog to the list of exempt labels. * Update meshtastic/web to v2.6.7 (#8381) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update DFRobot_RTU to v1.0.6 (#8387) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update mcr.microsoft.com/devcontainers/cpp Docker tag to v2 (#8375) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * manual merge stale bot config (#8392) * Board support: RAK3401+RAK13302 1-watt (#8140) * Add RAK3401 variant files * Add SPI configuration for RAK3401 and RAK13302 variants * Refactor SPI pin configuration and clean up variant definitions for RAK3401 * Add TX_GAIN_LORA for RAK13302 Power Amp * Fix merge --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> --------- Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: Daniel.Cao <144674500+DanielCao0@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>	2025-10-19 08:54:56 +11:00
Daniel.Cao	af8407aca9	Board support: RAK3401+RAK13302 1-watt (#8140) ... * Add RAK3401 variant files * Add SPI configuration for RAK3401 and RAK13302 variants * Refactor SPI pin configuration and clean up variant definitions for RAK3401 * Add TX_GAIN_LORA for RAK13302 Power Amp * Fix merge --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>	2025-10-19 08:53:39 +11:00
Jonathan Bennett	5953b4704e	Force CannedMessages to another node to be a PKI DM (#8373)	2025-10-16 14:01:04 -05:00
Ben Meadors	a34c584028	Merge branch 'master' into develop	2025-10-16 06:08:54 -05:00
Ben Meadors	865b46ceef	Ignore MQTT Client Proxy messages while not in sendpackets state (#8358)	2025-10-16 06:07:38 -05:00
Jonathan Bennett	4e0a4cc45f	Log the lora frequency error when receiving a packet. (#8343)	2025-10-15 06:34:28 -05:00
Clive Blackledge	a6df18e60a	Guarding PhoneAPI node-info staging with mutex to prevent BLE future foot-gun (#8354) ... * Eliminating foot-gun and placing Phone NodeInfo into a mutex * Swapping over to concurrency::Lock from mutex	2025-10-15 06:08:06 -05:00
Erayd	9a8aeb25ab	Add a general-purpose packet cache (#8341) ... * Add general-purpose packet cache This commit adds a caching system that will save packet data in a much more compact form than the regular MeshPacket protobuf. It cannot be worked with directly to the same degree (although the packet header is available), but consumes *much* less memory, and as a result can be used to temporarily store large numbers of packets. Cached packets can be retrieved either by their (from, id) tuple, or by their hash. This cache is a pre-requisite for the upcoming packet replay feature. * Remove debug initialiser Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Fix ordering Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add missing size assignment Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add comments for hash & bucket macros * Make it clear that this field stores a map of the original data --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-14 19:22:45 -05:00
Ben Meadors	dbb439f121	Merge pull request #8337 from meshtastic/develop ... Develop to master merge	2025-10-13 20:51:52 -05:00
Ben Meadors	5814f3e7d2	Revert "Fix Station G2 Lora Power Settings (#8273)" (#8332) ... This reverts commit 05edcc5d6c.	2025-10-13 17:17:32 -05:00
Markus	a71b47b5bb	rework sensor instantiation to saves memory by removing the static allocation (#8054) ... * rework I2C sensor init the goal is to only instantiate sensors that are pressend to save memory. side effacts: - easyer sensor integration (less C&P code) - nodeTelemetrySensorsMap can be removed when all devices are migrated * add missing ifdef * refactor a bunch of more sensors RAM -816 Flash -916 * fix build for t1000 * refactor more sensors RAM -192 Flash -60 * improve error handling Flash -112 * fix build * fix build * fix IndicatorSensor * fix tracker-t1000-e build not sure what magic is used but it works * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/DFRobotGravitySensor.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Fix --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-10-13 11:09:33 -05:00
Steven Wu	9df5aa8c70	Fix can not detect battery status while using INA226 (#8330) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-13 08:15:21 -05:00
Tom Fifield	130833b5be	Fix erroneous limiting of power in Ham Mode (#8322) ... Ham Mode ignores region regulatory limits, so regardless of whether we set a single TX_GAIN_LORA or an array with a non-linear PA, we shouldn't limit the power. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-13 07:50:57 -05:00
Dirk Mueller	fe6509a0f2	Avoid exceeding allocated buffers when doing MQTT proxying (#8320) ... the topic length could be longer than 65 characters. similarly for the payload. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-13 06:57:21 -05:00
Clive Blackledge	fcaa168d2d	Ble reconnect prefetch bug fix, plus some speed enhancements (#8324) ... * Fixing bluetooth reconnects and adding performance * Added comments	2025-10-13 06:32:05 -05:00
l0g-lab	7537d28419	Nodelist: choice of long or short name (#7926) ... * update to use long names for pager * remove duplicate * add menu item * fix after conflict * menu name change. use sanitizeString * fix formatting issue. should pass trunk now. * remove auto-generated protobufs * remove log, add tdeck, improvements. --------- Co-authored-by: l0g-lab <l0g-lab@users.noreply.github.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-12 08:25:15 -05:00
Ben Meadors	5d71776527	Merge pull request #8317 from meshtastic/master ... Master backmerge	2025-10-12 07:41:04 -05:00
Ben Meadors	661e596dbb	Fix muted channel compile errors after protobuf move (#8316)	2025-10-12 07:39:23 -05:00
Ben Meadors	a6732682de	Opt in to telemetry going forward (#8059)	2025-10-12 06:30:17 -05:00
Jason P	f0126d44e2	More BaseUI Frame Visibility Toggles (#8252) ... * Add Power and Environmental Telemetry Hide/Show * Allow Power and Telemetry Frames even if module disabled --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-12 06:28:23 -05:00
Clive Blackledge	fb08e17c39	Increase bluetooth 5.0 PHY speed and MTU on esp32_s3 (#8261) ... * Increase Bluetooth speed to 2MB, increase MTU * Adding esp32c6 * trunk fmt..	2025-10-12 05:35:00 -05:00
Tom Fifield	11aff46af1	Remove T1000E GPS startup delay sequence (#8236) ... 8 months ago, when this was added to the code, the GPS probe code was still a little flaky. Particularly after #6114 and #6116 were added, reliability improved for all devices as we were sending fewer calls on the bus. Today, the T1000E is the only Meshtastic device that regularly takes 2, 3, or 4 attempts to be detected via the probe code. Removing these lines, on my T1000E, results in the AG3335 being detected immediately. Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-12 05:34:34 -05:00
github-actions[bot]	cb11e6b720	Update protobufs (#8305) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-10-12 05:34:00 -05:00
Jonathan Bennett	8bf32dc042	Attach an interrupt to EXT_PWR_DETECT if present, and force a screen redraw on a power change.	2025-10-11 11:31:42 -05:00
Ben Meadors	73cadce581	Fix BLE stateful issues (#8287)	2025-10-11 11:31:42 -05:00
Tom Fifield	30d6962e79	Fix Station G2 Lora Power Settings (#8273) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Fix Station G2 Lora Power Settings In #8107 we introduced the ability to specify gain values for non-linear power amplifiers. This patch adds appropriate values for the Station G2, based on the table at https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test Fixes https://github.com/meshtastic/firmware/issues/7239 --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-11 11:31:42 -05:00
Ben Meadors	f99747180e	NimBLE speedup (#8281) ... * Remove status polling code in NimBLE * Goober --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-11 11:31:42 -05:00
Andrew Yong	64bfe73c06	fix: Move #include "variant.h" to top of file (fixes #8276) (#8278) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * fix: Move `#include "variant.h"` to top of file (fixes #8276) The original line being further down the file causes any #ifdef/defined() checks for definitions in variant.h to silently skip. This was noticed when `USE_GC1109_PA` in Heltec v4 and Heltec Wireless Tracker failed to correct program TX_GAIN_LORA, but will also affect any variant.h-dependent configurations in this file, if they would have been defined above where the `#include` previously was. --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-11 11:31:42 -05:00
Austin	cafb007ec4	mDNS: Advertise pio_env (for OTA scripts) (#8298)	2025-10-11 10:30:47 -05:00
Jonathan Bennett	e5a2ce54e7	Attach an interrupt to EXT_PWR_DETECT if present, and force a screen redraw on a power change.	2025-10-09 19:07:20 -05:00
Ben Meadors	45f15b8fe6	Fix BLE stateful issues (#8287)	2025-10-09 12:44:00 -05:00
Tom Fifield	05edcc5d6c	Fix Station G2 Lora Power Settings (#8273) ... * Force coverage tests to run in simulation mode * Revert "Force coverage tests to run in simulation mode" This reverts commit e4ec719e6f. * Fix Station G2 Lora Power Settings In #8107 we introduced the ability to specify gain values for non-linear power amplifiers. This patch adds appropriate values for the Station G2, based on the table at https://wiki.uniteng.com/en/meshtastic/station-g2#summary-for-lora-power-amplifier-conduction-test Fixes https://github.com/meshtastic/firmware/issues/7239 --------- Co-authored-by: Austin Lane <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-10-08 16:03:26 -05:00
Ben Meadors	828e11cc48	NimBLE speedup (#8281) ... * Remove status polling code in NimBLE * Goober --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-10-08 14:16:57 -05:00