pohui_pohui/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-02-04 03:39:56 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
1,237 Commits 26 Branches 279 Tags 192 MiB
6a475d8288
Commit Graph

103 Commits

Author SHA1 Message Date
geeksville
6a475d8288 WIP 2020-09-04 17:23:17 -07:00
geeksville
c629b94333 portduino WIP 2020-09-04 15:03:22 -07:00
geeksville
af046e7dbd bug #322 - ttgo lora32 deep sleep 
oh - I think I found the problem (probably)!  we were isolating gpio12 (which isn't used on other boards) to save power during sleep.  gpio12 is the button for this board. @thomslik would you mind pulling this commit and seeing if it works better?
 2020-08-26 14:00:10 -07:00
geeksville
ca75dcd64d Add support for SX1262 based TBEAMs, see below for more details. 
We probe dynamically for the SX1262 or RF95 based radios on TBEAM1.0
boards now.  If either is present it will be used.
 2020-08-20 15:42:36 -07:00
geeksville
3c09c3e520 show NRF52840 debug output via the USB CDC-ACM device 2020-08-17 11:50:50 -07:00
geeksville
1c3eff0ee5 turn on fix #279 for tbeam0.7 and ttgo lora32-1.6 battery levels 2020-08-13 19:55:57 -07:00
geeksville
6a402b13fa Add battery sensing (mostly) for TBEAM0.7 
However, disabled until someone with suitable hardware can test and report
back.

@slavino and @tschundler would you be willing to try it with your boards?

You'll need to uncomment the following line in configuration.h

// #define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 2020-08-12 17:03:36 -07:00
geeksville
859642d2e4 Merge remote-tracking branch 'root/master' into post1 
# Conflicts:
#	src/configuration.h
 2020-07-17 12:06:57 -07:00
geeksville
f919eb6a64 Install a hardfault handler on NRF52 2020-07-15 13:29:09 -07:00
Marlon Spangenberg
44749470a4 fix #272 add support for tlora-v2-1-1.6 2020-07-14 16:16:49 +02:00
geeksville
e12c057c31 RAK815 lora works 2020-07-10 14:37:01 -07:00
geeksville
6fbf6b2986 RAK815 WIP - use 115200 for serial to USB on this board, best it can do 2020-07-10 13:24:00 -07:00
geeksville
feb9992d7d on rak815 use serial port for console 2020-07-10 13:11:29 -07:00
geeksville
fb4ac82d45 fix rf95 renaming 2020-07-10 12:47:10 -07:00
geeksville
b00a936f41 WIP RAK815 support 2020-07-10 11:02:29 -07:00
geeksville
80b14c0a6f add support for adafruit feather nrf52832 - which is close to a RAK815 2020-07-09 21:27:34 -07:00
geeksville
ed589727d6 Update NRF52 build to work again 2020-07-09 19:57:55 -07:00
Slavomir Hustaty
439cdfbb32
Update configuration.h 
https://github.com/meshtastic/Meshtastic-device/issues/243#issuecomment-653361142
 2020-07-03 07:41:22 +02:00
Slavomir Hustaty
da12b93f82
Update configuration.h 
https://user-images.githubusercontent.com/1584034/86362734-08525e00-bc76-11ea-8a34-8579d1fa2965.jpg

related to issue https://github.com/meshtastic/Meshtastic-device/issues/243
 2020-07-02 16:54:24 +02:00
geeksville
9baaa13897 Add optional external GPS for TTGO Lora V2 
per this request: https://meshtastic.discourse.group/t/gps-pin-assignments-for-custom-boards/501/9?u=geeksville
 2020-06-25 09:45:21 -07:00
Marlon Spangenberg
68e57dd3a7
added ttgo-lora32-v1 gps pins again :D 
Sry I messed up as I closed #213, so here are the pin definitions again.
 2020-06-24 12:15:50 +02:00
Professr
cfcaf28ace Switched user button to OneButton, added alt button GPIO for #162 2020-06-22 11:09:26 -07:00
geeksville
a47524b762 cubecell wip 2020-06-16 17:13:26 -07:00
geeksville
92e5a15399 Merge branch 'master' into cubecell 2020-06-15 12:42:01 -07:00
Kevin Hester
d65f2ede81
Merge branch 'master' into sh1106-support 2020-06-15 12:26:12 -07:00
Zombodotcom
1c6092c430 Fixed GPS pin Definitions 2020-06-15 11:38:15 -06:00
Marcel van der Boom
37c598833c Add support for SH1106 controller 
The SH1106 is almost indistinguisable from a SSD1306.

- the nr of columns in the sh1106 is 132 vs 128
- use the proper includes/library functions when in use
 2020-06-14 10:28:23 +02:00
geeksville
8ccd59a7d8 Fix #115: wake from light sleep if a character arrives on the serial port 
Note - we do this not by using the uart wake feature, but by the lower
power GPIO edge feature.  Recommend sending "Z" 0x5A - because that has
many edges.  Send the character 4 times to make sure the device is awake
 2020-06-10 15:36:38 -07:00
geeksville
1c63a70673 cubecell WIP 2020-06-05 17:30:09 -07:00
geeksville
925e46da8c make serial console work on nrf52 2020-05-21 21:17:53 -07:00
geeksville
a0b43b9a95 Send "unset" for hwver and swver if they were unset 2020-05-12 17:57:51 -07:00
geeksville
8b911aba7f Cleanup build for NRF52 targets 2020-05-10 12:33:17 -07:00
geeksville
814c126e67 ugly WIP on switching to RadioLib, still need to set freq etc... 2020-04-29 14:54:03 -07:00
geeksville
cceecf5f8e New serial protobuf transport approximately works and is backward 
compatiable with the text debug output.
 2020-04-27 09:36:39 -07:00
geeksville
15cb599cd1 move nrf52 stuff to correct directory name 2020-04-27 07:39:50 -07:00
geeksville
ca03110932 Update ESP32 build to work with latest NRF52 changes 2020-04-24 14:55:51 -07:00
geeksville
4f7e85c1a4 cleanup serial instanciation on boards where we might not use it 2020-04-24 08:05:56 -07:00
geeksville
3c9c01189d old RF95 driver probably works on NRF52 now 2020-04-23 18:47:27 -07:00
geeksville
2fdb75efdf make GPS 'work' on nrf52 2020-04-23 16:20:07 -07:00
geeksville
f0f6c4950b on NRF52 use the Segger debug console for debug logging 2020-04-23 13:27:16 -07:00
geeksville
bd77d47215 change serial baud rate to 921600 2020-04-22 14:58:35 -07:00
geeksville
2419ebb04e 0.4.3 Fix #92: omg - for the last couple of weeks the official builds were 
all using US frequencies.  This build fixes this (and makes the build
system cleaner in general).

If you are building your own builds in the IDE you'll need to start
setting an environment variable called COUNTRY to your two letter
country code (or leave unset to get US frequencies).  See new comment
in platformio.ini.
 2020-04-19 08:33:59 -07:00
geeksville
0a6af936ed Get build (kinda, not really) running on a NRF52 
Lots of NO_ESP32 to remove later...
 2020-04-14 20:22:27 -07:00
Kevin Hester
04ad8bb533
Merge branch 'master' into cleanupblue 2020-04-10 21:11:46 -07:00
geeksville
93a06906cb begin splitting up source files, so we can have a tree of sources... 
unique to each architecture.  For now, we have "esp32" and "bare"

esp32 is the old esp stuff

bare is an target suitable for emulation that doesn't require any
particular hardware to run (no bluetooth, no i2c devices, no spi devices)
 2020-04-10 12:15:35 -07:00
BeardyWalrus
3754950a0e
pinouts are swapped for TTGO-Lora32 V1 and V2 boards. 
discovered by eriktheV-king in discourse
 2020-04-09 20:44:15 -04:00
geeksville
da74803ffb begin cleanup on radio abstraction, details below: 
* to allow changing to new mesh transport
* to allow a different chipset for the radio
* to allow testing on hardware with a SimRadio
* new "bare" build env for a devboard with virtually no hardware
* make buttons optional
 2020-03-31 21:56:35 -07:00
geeksville
ea250d9cd3 add initial guess at TBEAM 0.7 hardware support 2020-03-28 15:31:22 -07:00
geeksville
be468a2183 add reasonable guesses for TTGO LORA V1 and V2 boards - thanks @sensorsiot 
for the pinouts
 2020-03-28 14:45:33 -07:00
geeksville
cf2aa37635 clean up configuration.h and add support for ttgo-lora-v1 boards 2020-03-27 16:55:19 -07:00