Will always rebroadcast packets, but will do so after all other modes.
Intended for router nodes that are there to provide additional coverage
in areas not already covered by other routers, or to bridge around
problematic terrain, but should not be given priority over other routers
in order to avoid unnecessaraily consuming hops.
By default, this role will rebroadcast during the normal client window.
However, if another node is overheard rebroadcasting the packet, then it
will be moved to a second window *after* the normal client one, with the
same timing behaviour.
* Very hacky first attempt at usermod ech341
* Fixes and debug printfs
* Move to library version of libpinedio-usb
* Add spidev: ch341 option in meshtasticd config.yaml
* Only check settingsStrings on native
* Use new CH341 code
* Bump ch341 lib
* Cleanup USBHal
* Add ch341 config.d files
* Remove ch341quirk
* Bump to most recent spi-userspace driver
* Add handling for ch341 serial, pid, and vid
* Minor fixes from pio check
* Trunk
* Add include for musl compliance
* Point to upstream libch341
* Remove assert in mesh-pb-constants.cpp
* Add raw packet output to portduino trace logging.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* * Adding the -Wcast-align compilation flag for
the rp2040.
* * Some rework to use a struct to access radio data
* Buffer will not be accessed by arithmetic pointer anymore
* * Remplace arithmetic pointer to avoid Warning
* * Avoid 2 little artitmetic pointer
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor and consolidate windowing logic
* Trunk
* Fixes
* More
* Fix braces and remove unused now variables.
There was a brace in src/mesh/RadioLibInterface.cpp that was breaking
compile on some architectures.
Additionally, there were some brace errors in
src/modules/Telemetry/AirQualityTelemetry.cpp
src/modules/Telemetry/EnvironmentTelemetry.cpp
src/mesh/wifi/WiFiAPClient.cpp
Move throttle include in WifiAPClient.cpp to top.
Add Default.h to sleep.cpp
rest of files just remove unused now variables.
* Remove a couple more meows
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Turn off vscode cmake prompt - we don't use cmake on meshtastic
* Add rak4631_dap variant for debugging with NanoDAP debug probe device.
* The rak device can also run freertos (which is underneath nrf52 arduino)
* Add semihosting support for nrf52840 devices
Initial platformio.ini file only supports rak4630
Default to non TCP for the semihosting log output for now...
Fixes https://github.com/meshtastic/firmware/issues/4135
* powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 )
* oops - mean't to mark the _dbg variant as an 'extra' board.
* powermon wip
* Make serial port on wio-sdk-wm1110 board work
By disabling the (inaccessible) adafruit USB
* Instrument (radiolib only for now) lora for powermon
per https://github.com/meshtastic/firmware/issues/4136
* powermon gps support
https://github.com/meshtastic/firmware/issues/4136
* Add CPU deep and light sleep powermon states
https://github.com/meshtastic/firmware/issues/4136
* Change the board/swversion bootstring so it is a new "structured" log msg.
* powermon wip
* add example script for getting esp S3 debugging working
Not yet used but I didn't want these nasty tricks to get lost yet.
* Add PowerMon reporting for screen and bluetooth pwr.
* make power.powermon_enables config setting work.
* update to latest protobufs
* fix bogus shellcheck warning
* make powermon optional (but default enabled because tiny and no runtime impact)
* tell vscode, if formatting, use whatever our trunk formatter wants
without this flag if the user has set some other formatter (clang)
in their user level settings, it will be looking in the wrong directory
for the clang options (we want the options in .trunk/clang)
Note: formatOnSave is true in master, which means a bunch of our older
files are non compliant and if you edit them it will generate lots of
formatting related diffs. I guess I'll start letting that happen with
my future commits ;-).
* add PowerStress module
* nrf52 arduino is built upon freertos, so let platformio debug it
* don't accidentally try to Segger ICE if we are using another ICE
* clean up RedirectablePrint::log so it doesn't have three very different implementations inline.
* remove NoopPrint - it is no longer needed
* when talking to API clients via serial, don't turn off log msgs instead encapsuate them
* fix the build - would loop forever if there were no files to send
* don't use Segger code if not talking to a Segger debugger
* when encapsulating logs, make sure the strings always has nul terminators
* nrf52 soft device will watchdog if you use ICE while BT on...
so have debugger disable bluetooth.
* Important to not print debug messages while writing to the toPhone scratch buffer
* don't include newlines if encapsulating log records as protobufs
* update to latest protobufs (needed for powermon goo)
* PowerStress WIP
* fix linter warning
This seems to fix the ch341 quirk where large packets fail to send. As it can be problematic for other radios, we gate it behind "ch341_quirk" in the config.
* Set `hop_start` in header to determine how many hops each packet traveled
* Set hopLimit of response according to hops used by request
* Identify neighbors based on `hopStart` and `hopLimit`
* NeighborInfo: get all packets and assume a default broadcast interval
* Add fail-safe in case node in between is running modified firmware
* Add `viaMQTT` and `hopsAway` to NodeInfo
* Replace `HOP_RELIABLE` with hopStart for repeated packet
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Mark packets received via MQTT and add option to ignore them
* Don't send packets received via MQTT back into MQTT
Generate implicit ACK for packets we as an MQTT gateway sent
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* POC. Board definition JSON upcoming. Generic for now
* side-effect: RP2040 is building again.
* WIP Pico Targets
* current state of affairs
* ahem
* POC. Board definition JSON upcoming. Generic for now
* side-effect: RP2040 is building again.
* WIP Pico Targets
* current state of affairs
* ahem
* fmt
* update toolkit and fmt
* Add built in LED pin
* Use arduino pins
* init SPI bus on right pins.
* Use SPI1 and control chip select manually
* Use macro define for SPI selection. This needs to be defined in the ini file since portduino needs it inside the framework source
* Remove manual CS; works when not using setCS()
* Remove whoopsie debug line
* we are not ARDUINO_AVR_NANO_EVERY any more
* fix rp2040 compilation
* fix RadioLibHAL
* Use new arduino-pico core
* Use cortex-m0plus for BSEC2 library
* Forgot RAK11310 target for BSEC2 library
* That branch was merged
* RAK11310 is working too
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* When channel is active, first try receiving that packet
Afterwards we'll try transmitting again
* Remove setStandby in startSend
Already done in isChannelActive()
* Set LORA_DIO1 as RadioLib GPIO for SX127x
* LORA_DIO1 for Heltec v1, overlaps with GPS_TX
Set to RADIOLIB_NC for now
* If receive was not successful, startReceive doesn't trigger the interrupt
So we have to go back to transmitting anyway
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Yank mqtt service envelope queue
* trybuildfix mqtt system
* removed too much
* no excessive heap debugging on release builds
* send QueueStatus messages
The QueueStatus message is sent as a response to the attempt to queue
an outgoing MeshPacket and contains statuses of the last queue
attempt, TX Queue space and capacity and MeshPacket.id that was
queued.
When TX Queue changes status from completely full to at least
a single slot free a QueueStatus message is also sent to notify
that user can queue more messages.
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
* WIP: update protobufs
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
* update protobufs
* regen protos
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Sacha Weatherstone <sachaw100@hotmail.com>
