537 Commits

Author	SHA1	Message	Date
Jonathan Bennett	81828c6244	Don't set non-existent pin on e290 (#7213) ... * Don't set non-existent pin on e290 * Don't twiddle imaginary pins on the e213, either	2025-07-03 14:52:55 +10:00
Jonathan Bennett	549250b91a	Good bot -- make array large enough to handle all the possible options	2025-07-02 22:39:29 -05:00
Jonathan Bennett	a6be2e46ed	2.7 fixes w2 (#7148) ... * Initial work on splitting notification renderer into components for reuse * More progress * Fix notification popup * more fix, less crash * Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar * Small changes for EInk to not crowd elements * Change System frame menu over to better match actions; added color picker for T114 * Fix build errors and add T190 for testing * Logic gates are hard sometimes * Screen Color Picker changes, defined Yellow as a Color. * Additional colors and tuning * Abandon std::sort in NodeDB, and associated fixes (#7175) * Generate short name for nodes that don't have user yet * Add reboot menu * Sort fixes * noop sort option to avoid infinite loop * Refactor Overlay Banner * Continuing work on Color Picker * Add BaseUI menus to add and remove Favorited Nodes * Create TFT_MESH_OVERRIDE for variants.h and defined colors * Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot. * T114 defaults to White, Yellow is now bright Yellow * Revert "T114 defaults to White, Yellow is now bright Yellow" This reverts commit 8d05e17f11. * Only show OEM text if not OLED * Adjust OEM logo to maximize visible area * Start plumbing in Color Picker changes * Finished plumbing * Fix warning * Revert "Fix warning" This reverts commit 2e8aecd52d. * Fix display not fully redrawing * T-Deck should get color too * Emote Revamp * Update emotes.cpp * Poo Emote fix * Trunk fix * Add secret test menu and number picker * Missed bits * Save colors between reboots * Save Clock Face election to protobuf * Make reboot first, then settings * Add padding for single line pop-ups * Compass saving and faster menus * Resolve build issue with Excluding GPS * Resolve issue with memory bars on EInk * Add brightness settings for supported screen (#7182) * Add brightness menu. * add loop destination selection. * Bring back color (and sanity) to the menus! * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Wilson <m.tools@qq.com>	2025-07-02 20:50:49 -05:00
todd-herbert	1f85e2a02a	Additional larger font for InkHUD UI (#7201) ... * Add 12pt fonts * Add fontMedium In addition to fontSmall and fontLarge * Set fonts in nicheGraphics.h * Change all uses of fontLarge to fontMedium fontLarge was previously set at 9pt. fontLarge is now 12pt, fontMedium is 9pt. (NB: fonts may be customized per-variant) * Use fontLarge with "All Messages" and "DMs" applets * Documentation	2025-07-02 19:18:34 -05:00
Razurac	e505ec847e	Added option to invert screen on InkHUD (#7075) ... * Added option to invert screen on InkHUD * Rewrite to make use of existing config.display.displaymode --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-02 06:06:02 -05:00
Mictronics	17f8303e01	Fix build when MESHTASTIC_EXCLUDE_GPS is defined (#7154) ... * Fix LED pinout for T-Echo board marked v1.0, date 2021-6-28 * Merge PR #420 * Fixed double and missing Default class. * Use correct format specifier and fixed typo. * Removed duplicate code. * Fix error: #if with no expression * Fix warning: extra tokens at end of #endif directive. * Fix antenna switching logic. Complementary-pin control logic is required on the rp2040-lora board. * Fix deprecated macros. * Set RP2040 in dormant mode when deep sleep is triggered. * Fix array out of bounds read. * Admin key count needs to be set otherwise the key will be zero loaded after reset. * Don't reset the admin key size when loading defaults. Preserve an existing key in config if possible. * Remove log spam when reading INA voltage sensor. * Remove static declaration for admin keys from userPrefs.h. Load hard coded admin keys in case config file has empty slots. * Removed newlines from log. * Fix issue #5665. * Fix build for Pico2 RP2350 platform. * Enable Wifi client on Pico2W. * Use correct processor on Pico2. * Fix deprecated warning. * Update platform and framework for RP2350. * Added Pico2W variant including Wifi support. * Fix typo in used variant. * Remove obsolete define. * Fix for native Linux build. * Simplify RP2350 platform tag reference. Co-authored-by: Austin <vidplace7@gmail.com> * Cast user prefs strings. * Update to last successfully building platform package. * Define I2C GPIOs to ensure usage of both ports. Possibly fixes #5361 * RAK11310 support for RAK12002 RTC added. * Update platform and framework packages to 4.4.3. * Use RP2040 base platform and framework package. Use RAK11300 board definition in arduino-pico framework. * Use RAK11300 board definition in arduino-pico framework. * Fix build when MESHTASTIC_EXCLUDE_GPS is defined. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-07-02 05:59:43 -05:00
todd-herbert	13013a272f	Limited emoji support for InkHUD (#7176) ... * Cram a few emoji into AdafruitGFX fonts Values which would normally be assigned to unprintable control characters * Another sneaky string which may contain UTF-8 chars * Document emoji --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-07-01 20:18:14 -05:00
Jason P	29e7a71c97	2.7 Miscellaneous Fixes - Week 1 (#7102) ... * Update Favorite Node Message Options to unify against other screens * Rebuild Horizontal Battery, Resolve overlap concerns * Update positioning on Message frame and fix drawCommonHeader overlay * Beginnings of creating isHighResolution bool * Fixup determineResolution() * Implement isHighResolution in place of SCREEN_WIDTH > 128 checks * Line Spacing bound to isHighResolution * Analog Clock for all * Add AM/PM to Analog Clock if isHighResolution and not TWatch * Simple Menu Queue, and add time menu * Fix prompt string for 12/24 hour picker * More menu banners into functions * Fix Action Menu on Home frame * Correct pop-up calculation size and continue to leverage isHighResolution * Move menu bits to MenuHandler * Plumb in the digital/analog picker * Correct Clock Face Picker title * Clock picker fixes * Migrate the rest of the menus to MenuHandler.* * Add compass menu and needle point option * Minor fix for compass point menu * Correct Home menu into typical format * Fix emoji bounce, overlap, and missing commonHeader * Sanitize long_names and removed unused variables * Slightly better sanitizeString variation * Resolved apostrophe being shown as upside down question mark * Gotta keep height and width in expected order * Remove Second Hand for Analog Clock on EInk displays * Fix Clock menu option decision tree * Improvements to Eink Navigation * Pause Banner for Eink moved to bottom * Updated working for 12-/24-hour menu and Added US/Arizona to timezone picker * Add Adhoc Ping and resolve error with std::string sanitized * Hide quick toggle as option is available within Action Menu, commented out for the moment * Remove old battery icon and option, use drawCommonHeader throughout, re-add battery to Clock frames * fix misc build warnings. NFC * Update Analog Clock on EInk to show more digits * Establish Action Menu on all node list screens, add NodeDB reset (with confirmation) option * Add Toggle Backlight for EInk Displays * Suppress action screen Full refresh for Eink * Adjust drawBluetoothConnectedIcon on TWatch * Maintain clock frame when switching between Clock Faces * Move modules beyond the clock in navigation * addressed the conflicts, and changed target branch to 2.7-MiscFixes-Week1 * cleanup, cheers * Add AM/PM to low resolution clock also * Small adjustments to AM/PM replacement across various devices * Resolve dangling pointer issues with sanitize code * Update comments for Screen.cpp related to module load change * Trunk runs * Update message caching to correct aged timestamp * Menu wording adjustments * Time Format wording * Use all the rows on EInk since with autohide the navigation bar * Finalize Time Format picker word change * Retired drawFunctionOverlay code No longer being used * Actually honor the points-north setting * Trunk * Compressed action list * Update no-op showOverlayBanner function * trunk * Correct T_Watch_S3 specific line * Autosized Action menu per screen * Finalize Autosized Action menu per screen * Unify Message Titles * Reorder Timezones to match expectations * Adjust text location for pop-ups * Revert "Actually honor the points-north setting" This reverts commit 20988aa4fa. * Make NodeDB sort its internal vector when lastheard is updated. Don't sort in NodeListRenderer * Update src/graphics/draw/NodeListRenderer.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Pass by reference -- Thanks Copilot! * Throttle sorting just a touch * Check more carefully for own node * Eliminate some now-unneeded sorting * Move function after include * Putting Modules back to position 0 and some trunk checks found * Add Scrollbar for Action menus * Second attempt to move modules down the navigation bar * Continue effort of moving modules in the navigation * Canned Messages tweak * Replicate Function + Space through the Menu System * Move init button parameters into config struct (#7145) * Remove bundling of web-ui from ESP32 devices (#7143) * Fixed triple click GPS toggle bungle * Move init button parameters into config struct * Reapply "Actually honor the points-north setting" This reverts commit 42c1967e7b. * Actually do compass pointings correctly * Tweak to node bearings * Menu wording tweaks * Get the compass_north_top logic right * Don't jump frames after setting Compass * Get rid of the extra bearingTo functions * Don't blink Mail on EInk Clock Screens * Actually set lat and long * Calibrate * Convert Radians to Degrees * More degree vs radians fixes * De-duplicate draw arrow function * Don't advertise compass calibration without an accell thread. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: csrutil <keming.cao@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-26 22:11:20 -05:00
dylanli	eeb52a1221	support seeed_wio_tracker_L1_eink (#7125) ... * initial commit of eink version * fit for ssd1682 initial test run hud * update to solve mirroring problem * change eink screen ic to ssd1680 * remove HINK_E0213A367 * trunk fmt * fix wrong type * fix some fmt	2025-06-26 06:30:45 -05:00
todd-herbert	ecfaf3a095	Canned Messages via InkHUD menu (#7096) ... * Allow observers to respond to AdminMessage requests Ground work for CannedMessage getters and setters * Enable CannedMessage config in apps for InkHUD devices * Migrate the InkHUD::Events AdminModule observer Use the new AdminModule_ObserverData struct * Bare-bones NicheGraphics util to access canned messages Handles loading and parsing. Handle admin messages for setting and getting. * Send canned messages via on-screen menu * Change ThreadedMessageApplet from Observer to Module API Allows us to intercept locally generated packets ('loopbackOK = true'), to handle outgoing canned messages. * Fix: crash getting empty canned message string via Client API * Move file into Utils subdir * Move an include statement from .cpp to .h * Limit strncpy size of dest, not source Wasn't critical in ths specific case, but definitely a mistake.	2025-06-25 06:04:18 -05:00
Jonathan Bennett	0108ad7992	Don't write the config unless the setting changed	2025-06-21 23:19:41 -05:00
Jonathan Bennett	4feaec651f	Unify the native display config between legacy display and MUI (#6838) ... * Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-21 06:36:04 -05:00
todd-herbert	465fe18a89	Dismiss ExternalNotification nagging on InkHUD button press (#7056) ... * Expose ExternalNotification::isNagging * Dismiss external notification on button press	2025-06-16 06:09:55 -05:00
todd-herbert	ba93097bb7	Add InkHUD driver for WeAct Studio 1.54" display module (#7000) ... * Strip redundant code from E-Ink driver * Begin polling for E-Ink update completion sooner In some cases, we might be waiting longer than we need to. * E-Ink driver for WeAct 1.54" display Currently identical to the popular GDEY0154D67 model. Kept separate now in case the drivers need to diverge in future. * Put back code which sets the number of gate lines	2025-06-12 19:59:28 -05:00
todd-herbert	de098cca4c	E-Ink driver for WEAct 2.13" BW (#7001)	2025-06-12 19:58:38 -05:00
HarukiToreda	3dec521f75	T-watch screen misalignment fix (#6996) ... * T-watch screen misalignment fix * Trunk fix	2025-06-09 05:27:52 -05:00
todd-herbert	ba296db701	Add InkHUD driver for WeAct Studio 2.9" display module (#6963) ... * Driver for WeAct Studio 2.9" ePaper module * Clarify that flex connector marking is not a unique id --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-06 17:35:47 +12:00
Ben Meadors	7a7166d575	Revert "Add a new screen for heltec_wireless_paper. (#6894)" (#6918) ... This reverts commit ba53543354.	2025-05-29 10:17:20 -05:00
Quency-D	ba53543354	Add a new screen for heltec_wireless_paper. (#6894) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:10:25 -05:00
todd-herbert	5195815df0	Parse own short name in LogoApplet (#6913)	2025-05-29 06:21:09 -05:00
todd-herbert	f223b8a55d	Add missing parsing of UTF-8 chars (#6889)	2025-05-25 13:12:52 -05:00
Chiho Sin	9b69c2a9af	graphics: Add GDEY0213B74 E-Ink display driver (#6879) ... Implement the GDEY0213B74 driver with configuration methods for scanning, waveform, update sequence, and polling for refresh completion. This driver supports both fast and full update types for the 2.13 inch E-Ink display. Signed-off-by: ChihoSin chihosin@icloud.com Signed-off-by: ChihoSin chihosin@icloud.com	2025-05-25 06:08:41 -05:00
todd-herbert	ba1ef45024	InkHUD Extended ASCII (#6768) ... * Custom AdafruitGFX fonts with extended ASCII encodings * AppletFont handles re-encoding of UTF-8 text * Manual parsing of text which may contain non-ASCII chars * Display emoji reactions, even when unprintable Important to indicate to users that a message has been received, even if meaning is unclear. * Superstitious shrink_to_fit I don't think these help, but they're not hurting! * Use Windows-1252 fonts by default * Spelling * Tidy up nicheGraphics.h * Documentation * Fix inverted logic Slipped in during a last minute renaming while tidying up to push..	2025-05-22 18:16:53 -05:00
Ben Meadors	94af3bd1ab	Formatting	2025-05-14 06:31:18 -05:00
Richard Zhang	d9ad2322e8	Fixes BUG #6243 Heltec Tracker (#6781) ... * fix wireless tracker screen issues * fix SHTC3 BUG * Remove the 32K crystal oscillator option for the Wireless Paper and Vision Master series. * Correct spelling errors * Update src/graphics/Screen.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 06:29:05 -05:00
Thomas Göttgens	cc66f7c79b	Crowpanel 4.3, 5.0, 7.0 support (#6611) ... * SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-05-13 14:15:52 +02:00
todd-herbert	10693c4569	Lock SPI bus while in use by InkHUD (#6719) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-02 06:20:56 -05:00
Manuel	a8ab6e82e6	MUI framebuffer support (#6703) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 20:50:30 -05:00
todd-herbert	5c005aaed5	Restore InkHUD to defaults on factory reset (#6637) ... * Erase InkHUD settings on factory reset * Documentation * Captialn't Lower case m. Also move the include statement to .cpp, because it doesn't really need to be in the .h	2025-05-01 12:28:05 +12:00
Jonathan Bennett	845088e45b	Add 100 msecond delay in tft_task_handler when deviceScreen is null (#6695) ... * Add 100 msecond delay in tft_task_handler when deviceScreen is null, to fix 100% usage bug * move portduino tft task creation into tftSetup * remove superfluous check * update platform-native commit --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-30 06:17:24 -05:00
todd-herbert	70ced735d9	Correct a typing error in InkHUD display driver (#6651) ... * Fix LCMEN2R13EFC1 LUT A typing error when the driver was initially created. * Spelling..	2025-04-22 06:25:53 -05:00
Austin	8812eadd44	Revert "Add IP Address Frame (#6615)" (#6639) ... This reverts commit 5d48d2c0a7.	2025-04-20 09:49:21 -05:00
Nivek-domo	5d48d2c0a7	Add IP Address Frame (#6615) ... * Update Screen.cpp add ip on screen if has ethernet pcb like w5500 spi * Run Trunk Format and Translate Comments FR->EN --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-04-20 20:06:39 +10:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
Benjamin Kyd	5fd64d4114	Fix uninitialised memory read (adminModule) (#6605)	2025-04-16 14:42:08 -05:00
Aaron.Lee	e5cd0d613c	Make startup screen show the short ID (#6591) ... * Update the short ID show on the boot up screen function	2025-04-16 11:20:12 +02:00
todd-herbert	cf5c8de92e	Fix spurious button presses on some T-Echos (#6590) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-15 20:33:44 -05:00
Tom Fifield	98411d408a	Trunk fixes for heltec mesh pocket. (#6588) ... https://github.com/meshtastic/firmware/pull/6533 was merged without running trunk. This patch fixes the newly introduced trunk errors.	2025-04-15 16:37:09 -05:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
todd-herbert	536b6d87c6	InkHUD support for LilyGo T3S3 E-Paper (#6503) ... * Purge an incomplete E-Ink driver * Use the deep-sleep mode of SSD16XX E-Ink displays * TwoButton doesn't need to store pin mode * Fix false positive button presses after light sleep * E-Ink driver for DEPG0213BNS800 * InkHUD support for LilyGo T3S3 E-paper --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 10:41:51 -05:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
todd-herbert	25237a15ff	feat: menu entry to send adhoc-ping (#6492)	2025-04-04 05:53:54 -05:00
Thomas Göttgens	594cb0cc1e	reinstate M1 Backlight (#6484)	2025-04-02 19:15:12 -05:00
Clément Hampaï	f6ed10f329	Added initial support for Texas Instruments LP5562 (#6381) ... * Added initial support for Texas Instrument LP5562 * Added proper support for Ambient Lighting * Code merge for all RBG_LED enabled devices * Fixed forgotten log_info & added firstRGBLED()	2025-04-01 22:39:40 +02:00
todd-herbert	128c347c64	fix: T-Echo frontlight on at boot when using OLED UI (#6474)	2025-04-01 05:26:46 -05:00
todd-herbert	886bffe8f3	fix: honor user button customization (#6400) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-31 06:03:44 -05:00
todd-herbert	bd2d2981c9	Add InkHUD driver for WeAct Studio 4.2" display module (#6384) ... * chore: todo.txt * chore: InkHUD documentation Word salad for maintainers * refactor: don't init system applets using onActivate System applets cannot be deactivated, so we will avoid using onActivate / onDeactivate methods entirely. * chore: update the example applets * fix: SSD16XX reset pulse Allow time for controller IC to wake. Aligns with manufacturer's suggestions. T-Echo button timing adjusted to prevent bouncing as a result(?) of slightly faster refreshes. * fix: allow timeout if display update fails Result is not graceful, but avoids total display lockup requiring power cycle. Typical cause of failure is poor wiring / power supply. * fix: improve display health on shutdown Two extra full refreshes, masquerading as a "shutting down" screen. One is drawn white-on-black, to really shake the pixels up. * feat: driver for display HINK_E042A87 As of Feb. 2025, these panels are used for "WeActStudio 4.2in B&W" display modules. * fix: inkhud rotation should default to 0 * Revert "chore: todo.txt" This reverts commit bea7df44a7. * fix: more generous timeout for display updates Previously this was tied to the expected duration of the update, but this didn't account for any delay if our polling thread got held up by an unrelated firmware task. * fix: don't use the full shutdown screen during reboot * fix: cooldown period during the display shutdown display sequence Observed to prevent border pixels from being locked in place with some residual charge?	2025-03-31 09:17:24 +02:00
todd-herbert	da26ff5b95	feat: more toggles for InkHUD menu (#6469) ... GPS on/off Wifi off -> Bluetooth on 12 / 24 hour clock	2025-03-31 09:15:54 +02:00
Mark Trevor Birss	b52c355f2f	Update ScreenFonts.h (#6412)	2025-03-30 20:37:08 -05:00
Jason P	d663d44647	Fix Bold and Inverted Displays to actually show Uptime (#6413) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-29 08:21:57 -05:00