* Re-implement PKI from #1509
co-authored-by: edinnen <ethanjdinnen@protonmail.com>
* Set the key lengnth to actually make PKI work.
* Remove unused variable and initialize keys to null
* move printBytes() to meshUtils
* Don't reset PKI key son reboot unless needed.
* Remove double encryption for PKI messages
* Cleanup encrypt logic
* Add the MESHTASTIC_EXCLUDE_PKI option, and set it for minimal builds. Required for STM32 targets for now.
* Use SHA-256 for PKI key hashing, and add MESHTASTIC_EXCLUDE_PKI_KEYGEN for STM32
* Fix a crash when node is null
* Don't send PKI encrypted packets while licensed
* use chIndex 8 for PKI
* Don't be so clever, that you corrupt incoming packets
* Pass on channel 8 for now
* Typo
* Lock keys once non-zero
* We in fact need 2 scratch buffers, to store the encrypted bytes, unencrypted bytes, and decoded protobuf.
* Lighter approach to retaining known key
* Attach the public key to PKI decrypted packets in device memory
* Turn PKI back off for STM32 :(
* Don't just memcp over a protobuf
* Don't PKI encrypt nodeinfo packets
* Add a bit more memory logging around nodeDB
* Use the proper macro to refer to NODENUM_BROADCAST
* Typo fix
* Don't PKI encrypt ROUTING (naks and acks)
* Adds SecurityConfig protobuf
* Add admin messages over PKI
* Disable PKI for the WIO-e5
* Add MINIMUM_SAFE_FREE_HEAP macro and set to safe 1.5k
* Add missed "has_security"
* Add the admin_channel_enabled option
* STM32 again
* add missed configuration.h at the top of files
* Add EXCLUDE_TZ and RTC
* Enable PKI build on STM32 once again
* Attempt 1 at moving PKI to aes-ccm
* Fix buffers for encrypt/decrypt
* Eliminate unused aes variable
* Add debugging lines
* Set hash to 0 for PKI
* Fix debug lines so they don't print pointers.
* logic fix and more debug
* Rather important typo
* Check for short packets before attempting decrypt
* Don't forget to give cryptoEngine the keys!
* Use the right scratch buffer
* Cleanup
* moar cleanups
* Minor hardening
* Remove some in-progress stuff
* Turn PKI back off on STM32
* Return false
* 2.5 protos
* Sync up protos
* Add initial cryptography test vector tests
* re-add MINIMUM_SAFE_FREE_HEAP
* Housekeeping and comment fixes
* Add explanatory comment about weak dh25519 keys
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Event mode: Enforce reliable hop limit
* Event mode: Short circuit wantsLink on MQTT for default broker address
* Just enforce at channels level since everything uses this
* For events never forward packets with excessive hop_limit
* In EVENT_MODE, don't respond with hop_limit set more then the configured max.
* Correct hop_start when correcting hop_limit in event mode.
* Make EVENT_MODE work from userPrefs.h
* Event mode: Disallow Router or Repeater roles
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Macro to trace log all MeshPackets as JSON
* Comment
* Add trace logging to file for native target
* bytes to hex
* Add time_ms
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Make sure to call randomSeed() on esp32
* Randomize the top 22 bits of the Message ID
* Make it clear that we are not calling randomSeed() on purpose
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* New UUID
* New log radio characteristic with LogRecord protobuf
* LogRecord
* Merge derp
* How did you get there
* Trunk
* Fix length
* Remove assert
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Set `hop_start` in header to determine how many hops each packet traveled
* Set hopLimit of response according to hops used by request
* Identify neighbors based on `hopStart` and `hopLimit`
* NeighborInfo: get all packets and assume a default broadcast interval
* Add fail-safe in case node in between is running modified firmware
* Add `viaMQTT` and `hopsAway` to NodeInfo
* Replace `HOP_RELIABLE` with hopStart for repeated packet
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Such that direct message to MQTT node gets published and we get rid of always rebroadcasting when MQTT is enabled
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* fix: allow MQTT `encryption_enabled` with `json_enabled`
* fix: copy decoded MeshPacket and release memory after use
* fix: use `packetPool` allocCopy and release methods
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Mark packets received via MQTT and add option to ignore them
* Don't send packets received via MQTT back into MQTT
Generate implicit ACK for packets we as an MQTT gateway sent
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix compression: encode to bytes after `decoded` is modified
* Change payload size to decompressed length
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* send ourNodeInfo to channel we got a message we heared someone new
* store node-channel into nodeDB
* use channel from nodeDb to send local messages
* update protobufs
* fmt and fix braces
* respect requested channel for local send, only store channel while getting a nodeinfo packet
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Yank mqtt service envelope queue
* trybuildfix mqtt system
* removed too much
* no excessive heap debugging on release builds
* send QueueStatus messages
The QueueStatus message is sent as a response to the attempt to queue
an outgoing MeshPacket and contains statuses of the last queue
attempt, TX Queue space and capacity and MeshPacket.id that was
queued.
When TX Queue changes status from completely full to at least
a single slot free a QueueStatus message is also sent to notify
that user can queue more messages.
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
* WIP: update protobufs
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
* update protobufs
* regen protos
Signed-off-by: Pavel Boldin <pavel.b@techspark.engineering>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Sacha Weatherstone <sachaw100@hotmail.com>
* Rearranging deck chairs, 900M22S working, 30S not
* We do have wire, just not where it's expected
* Put more of the module specific pins in their blocks
* tryfix compile with NO_SCREEN
* Portduino only: don't continue to try rebooting (#1887)
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Support for TLORA 2.1-1.8
* Don't allow arbitrary channel name for admin (#1886)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Experimental DIY nrf52840 feather support (#1884)
* Experimental DIY nrf52840 feather support
* Fix target
* sx1262 wiring
* Remove lib
* Don't consider Response as ACK for FloodingRouter (#1885)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix feather diy (#1892)
* Fix variant
* Fix feather diy target
* [modules][external notifications] allow select channel to listen to
* Fix feather diy pin mapping (#1894)
Thanks to @markbirss
* [create-pull-request] automated change
* Override Screen Autodtect
* Maybe fix crash of this board.
* Fixes reset loop with new espressif32 platform on tlora-v2
Sending a pulse to the OLED_RESET Pin 16 results in a reset loop using recent version of the espressif32 platform.
* Experiment with self hosted action runner
* Fix MQTT on ETH
* revert the tryfix
* Cheating
* Cleanup artifacts older than 1 month
* Update cleanup_artifacts.yml
* Update cleanup_artifacts.yml
* Update cleanup_artifacts.yml
* Delete cleanup_artifacts.yml
* fix: use RF95_IRQ for wakeup source in doLightSleep (#1899)
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update protos
* Update protos
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Mykhailo Lesyk <m@lesyk.org>
Co-authored-by: Mykhailo Lesyk <lesykm@users.noreply.github.com>
Co-authored-by: caveman99 <caveman99@users.noreply.github.com>
Co-authored-by: he-leon <he-leon@users.noreply.github.com>
Co-authored-by: Lars Weber <weber@weber-software.com>
* lay groundwork for a possible future architecture
* switch from feature opt-out to feature opt-in
* lay groundwork for a possible future architecture
* switch from feature opt-out to feature opt-in
* fix USE_RTC in variant.h for rak4631_epaper and t-echo
* ensure Screen.h is not included without configuration.h
Co-authored-by: Peter Lawrence <12226419+majbthrd@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
