* Add on-screen keyboard implementation on Wio Tracker L1.
* Update On-Screen Keyboard to new layout.
* The on-screen keyboard dynamically adjusts the key size based on the screen.
* Improve input box display on small screens.
* Optimize the virtual keyboard layout and cursor movement logic, and adjust the keyboard starting position for small and wide screens.
* Optimize the text alignment of numeric keys on ssd1306.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* More spoof remediation
* Fix signed comparison error
* Only fire self-bound messages into the routing module
* Update src/mesh/MeshModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* String const
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Initial support for the ThinkNode M5
* Update variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
Co-authored-by: Austin <vidplace7@gmail.com>
* Cleanup variant.h for Elecrow Thinknode M5
* Properly detect battery voltage
* Turn backlight off when screen sleeps
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Austin <vidplace7@gmail.com>
* feat: event mode - limit smart position updates to at most every 5m
* fix: convert 600 to 600000ms for 5min threshold
* fix: correct 5min threshold to 300000ms
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* T-watch screen misalignment fix
* Trunk fix
* Rember Last Receipient Node or channel
When a new freetext or preset message is sent and a destination is selected, the next message would forget the previously selected destination and would need to be selected again. With this fix it will remember the last destination selected until changed again.
* Fix for reply function to remember last messaged
* trunk check
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE
* stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Clear position on GPS deactivation, unless using fixed position
As reported by @dreimal8 , and confirmed by @tuxmobil , when using
and then subsequently disabling GPS the last position retrieved from
the GPS was stored and continued to be broadcast.
This change introduces a check to see if we are transitioning from
GPS Enabled to GPS Disabled or Not Present. If we are, and fixed
position is not in use, then we clear the local position.
This will prevent inaccurate and undesired position broadcasts for those
who disable their GPS.
Fixes https://github.com/meshtastic/firmware/issues/7228
* Update triple click to also clear position
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add TraceRoute function to menus and modules to support node path tracing
* Adjust text spacing and line wrapping logic in trace route result result.
* Add HAS_SCREEN for TraceRouteModule drawFrame.
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Unify the shutdown proceedure
* Don't double save nodeDB on shutdown
* Re-tool button shutdown to better correspond to tones
* Beep then save
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Calculate the length of the right string and use it
* Improve readability of Version Number
* Prevent negative message IDs and proactively favorite DM'd nodes
* Patch up Remove Favorite functionality
* Fix warnings for TFT_MESH_* and hasSupportBrightness
* Fix warning around casting variables
* Correct Favorite Node Behavior to rebuild favorite nodes when updated.
* Resolve bool kb_found issue not working for second discovery keyboards
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Enable GPS for Wio-E5 variant on Serial2
* Add ability to override GPS serial port using GPS_SERIAL_PORT, and make RAK2560 use it.
* Don't try to send ATAK packets if ATAK is disabled, +4k flash
* No delay between UI frame rendering for OLED
* force redraw the display
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
* feat(display): enable screen wake on received messages
* feat(menu): add Screen Wakeup option in system menu
* feat(ui): update wake on message configuration and refactor save logic
* feat(TextMessageModule): conditionally trigger screen wake on received message
* Refactoring system menu options for notification and screen.
* Fix MUI options in the system menu.
* Build out Reboot/Shutdown Menu and consolidate options within it
* Trunk fixes
* Protobuf ref
* Revert generated files
* Update plumbing for screen_wakeup_menu
* Begin work on crafting a method to stop screen wake for received messages
* SharedUIDisplay.cpp doesn't need ExternalNotificationModule.h
* Stop screen wake if External Notification is enabled
* Removing extra log lines
* Add role and battery state checks for not waking screen. Menu updates to resolve some Back options not being linked
* Resolve some additional merge conflict related issues
* Shouldn't throttle the power menu
* Finalize renames of some menus
* Flip Flop MUI Menu to avoid accidental clicks
* NULL check for powerStatus
* Remove "Wakeup" eNum
* Update src/graphics/Screen.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* CoPilot was close this should fix the builds
---------
Co-authored-by: whywilson <m.tools@qq.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Initial work on splitting notification renderer into components for reuse
* More progress
* Fix notification popup
* more fix, less crash
* Adjustments for OLED on keeping menus tidy, added Bluetooth Toggle to Home frame. Also widen the frame slightly if you have a scroll bar
* Small changes for EInk to not crowd elements
* Change System frame menu over to better match actions; added color picker for T114
* Fix build errors and add T190 for testing
* Logic gates are hard sometimes
* Screen Color Picker changes, defined Yellow as a Color.
* Additional colors and tuning
* Abandon std::sort in NodeDB, and associated fixes (#7175)
* Generate short name for nodes that don't have user yet
* Add reboot menu
* Sort fixes
* noop sort option to avoid infinite loop
* Refactor Overlay Banner
* Continuing work on Color Picker
* Add BaseUI menus to add and remove Favorited Nodes
* Create TFT_MESH_OVERRIDE for variants.h and defined colors
* Trigger a NodeStatus update at the end of setup() to get fresh data on display at boot.
* T114 defaults to White, Yellow is now bright Yellow
* Revert "T114 defaults to White, Yellow is now bright Yellow"
This reverts commit 8d05e17f11.
* Only show OEM text if not OLED
* Adjust OEM logo to maximize visible area
* Start plumbing in Color Picker changes
* Finished plumbing
* Fix warning
* Revert "Fix warning"
This reverts commit 2e8aecd52d.
* Fix display not fully redrawing
* T-Deck should get color too
* Emote Revamp
* Update emotes.cpp
* Poo Emote fix
* Trunk fix
* Add secret test menu and number picker
* Missed bits
* Save colors between reboots
* Save Clock Face election to protobuf
* Make reboot first, then settings
* Add padding for single line pop-ups
* Compass saving and faster menus
* Resolve build issue with Excluding GPS
* Resolve issue with memory bars on EInk
* Add brightness settings for supported screen (#7182)
* Add brightness menu.
* add loop destination selection.
* Bring back color (and sanity) to the menus!
* Trunk
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Wilson <m.tools@qq.com>
* Update platformio inis for stm32 platform and wio-e5 variant for enabling i2c
* Don't reference timezone functions if MESHTASTIC_EXCLUDE_TZ is defined
* Use custom pow_of_two in RadioInterface instead of floating-point pow()
* First pass: enable sensors for STM32wL
* Fix AirQualityTelemetryModule being created if the PM25AQI header is missing
* Link in power sensor libraries
* more ini tweaks
* Add =1 to EXCLUDE defines, fix indentation.
* Drop HAS_WIRE in ini, it's defined in architecture.h
* Fix build when power sensor libraries are missing
Make MAX sensor integration into Power.cpp optional based on its library header existing.
Also make NullSensor expose a voltage and current sensor, because Power calls directly into these for INA sensors.
This lets us remove all the deps for the STM32WL platform.
* Change default I2C for RAK3172 to be I2C1, not I2C2
* Respect the laws of mathematics (oops)
* Update Favorite Node Message Options to unify against other screens
* Rebuild Horizontal Battery, Resolve overlap concerns
* Update positioning on Message frame and fix drawCommonHeader overlay
* Beginnings of creating isHighResolution bool
* Fixup determineResolution()
* Implement isHighResolution in place of SCREEN_WIDTH > 128 checks
* Line Spacing bound to isHighResolution
* Analog Clock for all
* Add AM/PM to Analog Clock if isHighResolution and not TWatch
* Simple Menu Queue, and add time menu
* Fix prompt string for 12/24 hour picker
* More menu banners into functions
* Fix Action Menu on Home frame
* Correct pop-up calculation size and continue to leverage isHighResolution
* Move menu bits to MenuHandler
* Plumb in the digital/analog picker
* Correct Clock Face Picker title
* Clock picker fixes
* Migrate the rest of the menus to MenuHandler.*
* Add compass menu and needle point option
* Minor fix for compass point menu
* Correct Home menu into typical format
* Fix emoji bounce, overlap, and missing commonHeader
* Sanitize long_names and removed unused variables
* Slightly better sanitizeString variation
* Resolved apostrophe being shown as upside down question mark
* Gotta keep height and width in expected order
* Remove Second Hand for Analog Clock on EInk displays
* Fix Clock menu option decision tree
* Improvements to Eink Navigation
* Pause Banner for Eink moved to bottom
* Updated working for 12-/24-hour menu and Added US/Arizona to timezone picker
* Add Adhoc Ping and resolve error with std::string sanitized
* Hide quick toggle as option is available within Action Menu, commented out for the moment
* Remove old battery icon and option, use drawCommonHeader throughout, re-add battery to Clock frames
* fix misc build warnings. NFC
* Update Analog Clock on EInk to show more digits
* Establish Action Menu on all node list screens, add NodeDB reset (with confirmation) option
* Add Toggle Backlight for EInk Displays
* Suppress action screen Full refresh for Eink
* Adjust drawBluetoothConnectedIcon on TWatch
* Maintain clock frame when switching between Clock Faces
* Move modules beyond the clock in navigation
* addressed the conflicts, and changed target branch to 2.7-MiscFixes-Week1
* cleanup, cheers
* Add AM/PM to low resolution clock also
* Small adjustments to AM/PM replacement across various devices
* Resolve dangling pointer issues with sanitize code
* Update comments for Screen.cpp related to module load change
* Trunk runs
* Update message caching to correct aged timestamp
* Menu wording adjustments
* Time Format wording
* Use all the rows on EInk since with autohide the navigation bar
* Finalize Time Format picker word change
* Retired drawFunctionOverlay code
No longer being used
* Actually honor the points-north setting
* Trunk
* Compressed action list
* Update no-op showOverlayBanner function
* trunk
* Correct T_Watch_S3 specific line
* Autosized Action menu per screen
* Finalize Autosized Action menu per screen
* Unify Message Titles
* Reorder Timezones to match expectations
* Adjust text location for pop-ups
* Revert "Actually honor the points-north setting"
This reverts commit 20988aa4fa.
* Make NodeDB sort its internal vector when lastheard is updated. Don't sort in NodeListRenderer
* Update src/graphics/draw/NodeListRenderer.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Pass by reference -- Thanks Copilot!
* Throttle sorting just a touch
* Check more carefully for own node
* Eliminate some now-unneeded sorting
* Move function after include
* Putting Modules back to position 0 and some trunk checks found
* Add Scrollbar for Action menus
* Second attempt to move modules down the navigation bar
* Continue effort of moving modules in the navigation
* Canned Messages tweak
* Replicate Function + Space through the Menu System
* Move init button parameters into config struct (#7145)
* Remove bundling of web-ui from ESP32 devices (#7143)
* Fixed triple click GPS toggle bungle
* Move init button parameters into config struct
* Reapply "Actually honor the points-north setting"
This reverts commit 42c1967e7b.
* Actually do compass pointings correctly
* Tweak to node bearings
* Menu wording tweaks
* Get the compass_north_top logic right
* Don't jump frames after setting Compass
* Get rid of the extra bearingTo functions
* Don't blink Mail on EInk Clock Screens
* Actually set lat and long
* Calibrate
* Convert Radians to Degrees
* More degree vs radians fixes
* De-duplicate draw arrow function
* Don't advertise compass calibration without an accell thread.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: csrutil <keming.cao@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Allow observers to respond to AdminMessage requests
Ground work for CannedMessage getters and setters
* Enable CannedMessage config in apps for InkHUD devices
* Migrate the InkHUD::Events AdminModule observer
Use the new AdminModule_ObserverData struct
* Bare-bones NicheGraphics util to access canned messages
Handles loading and parsing. Handle admin messages for setting and getting.
* Send canned messages via on-screen menu
* Change ThreadedMessageApplet from Observer to Module API
Allows us to intercept locally generated packets ('loopbackOK = true'), to handle outgoing canned messages.
* Fix: crash getting empty canned message string via Client API
* Move file into Utils subdir
* Move an include statement from .cpp to .h
* Limit strncpy size of dest, not source
Wasn't critical in ths specific case, but definitely a mistake.
