* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* [WIP] Add RAK12035VB Soil Moisture Sensor support
Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.
This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.
Co-Authored-By: @Justin-Mann
* Update to 1.0.4 release of RAK12035_SoilMoisture
* cleanup
* cool
* .
* ..
* little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500
looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500.
improvements could be made around the configuration of the monitor.
next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity.
* . comments about current limitations and TODOs
* trunk update
* trying to autoformat..
* fix formatting attempt 2
* ..
* ...
* ...
* .
* some corrections and local build success
* correction in temp code
* grr formatting
* cleanup after a few experiments
* remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos.
* update some values in varient for rak wistap
* working out trunk formatting..
* wip
. corrections to other build variants
* .
* protobuffs?
* protobufs?
* Update protobufs ref
* Protobufs ref
* Trunk
* Update RAK12035Sensor.cpp
* Fmt
* comment changes
* dumb mistakes... resolved, actually built and tested.. all good..
* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* . proto submod
* proto
* proto
* merge master
* mabe a fix for GPS pin conflict, waiting on a new gps module to try
* merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035
* .
* .
---------
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
platformio/espressif32@6.9.0 --> 6.10.0
lewisxhe/XPowersLib@^0.2.6 --> 0.2.7
platformio/framework-arduinoststm32@~Oct 2024 --> 4.20900.0
zinggjm/GxEPD2@^1.4.9 --> 1.6.2
tool-esptoolpy@^1.40500.0 --> 1.40801.0
Used platformio tool to check, kept to minor version updates,
checked release notes for any breaking changes.
* Refactor EInkDisplay
A lot of variant specific code is merged, with the macros pushed to the respective variant.h files.
"Dynamic Partial" code has been purged, pending a rewrite.
* fix: declare class only if USE_EINK, init all members
* refactor: move macros to platformio.ini
Responds to https://github.com/meshtastic/firmware/pull/3299#issuecomment-1966425926
* fix: EInkDisplay::connect() references old macros
Usage was in a block of variant-specific code, which had been intentionally left untouched.
* fix: remove duplicate macros from variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for the rak10701 board, no touch
* Moved tftblack fillin and changed teh src flags
* Added rak10701 to platformio.ini
* Add USB detection to RAK4631 units.
* Eliminate spurious symbol in comment field.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Initial support for MonteOps's fixed hardware platform
* Update platformio env config + cleanup
* Fix platformio build
* Fix platformio build
* Fix wrong definition logic for NCP5623
* Fix another wrong definition logic for NCP5623, it's not board feature
* Fix wrong definition logic for NCP5623 in External Notification code, it's not board feature
* We need for CI magic here
* Another fix related to NCP5623
* Fix cosmetic issue with redifined variable
* Fix typo
* Cleanup and update defs for HW1
* Fix OEM RAK4631
* Fix AQ sensor reading
* Fix AQ sensor reading (better variant)
* Fix build for other nRF52 devices
* Replace HAS_EINK_RAK to RAK_4631
