24 Commits

Author	SHA1	Message	Date
Thomas Göttgens	50a301899e	start to sort radiolib out. If we have macros, use them! :-) ... Also we need Godmode for the SX1280 for now, hopefully can revert to more sane operation.	2022-11-14 09:49:50 +01:00
Thomas Göttgens	f7b12f0695	Adapt to new protobufs - TODO: factory_reset rewire	2022-09-09 12:51:41 +02:00
Jm Casler	46e13d23d9	Add debug to monitor radio reconfiguration for #1014 -	2022-06-21 21:51:45 -07:00
Ben Meadors	0767c0b0e8	Converted to jgromes/RadioLib upstream and pegged to latest ref (#1472) ... * Converted to jgromes/RadioLib upstream and pegged to latest ref	2022-05-29 19:30:20 -05:00
GUVWAF	6d01f9aa89	Add isChannelActive() function to radio interface	2022-04-20 20:04:44 +02:00
Jm Casler	ac8ba706f0	Add rssi meta data to the rf95 interface	2022-02-28 17:07:31 -08:00
Vladislav Osmanov	cb42440963	fix module frequency overriding ... The `RadioInterface::freq` member was encapsulated with the `RadioInterface::getFreq()` function, which could be overridden in child classes for some LoRa-modules.	2021-09-13 22:13:51 +03:00
Vladislav Osmanov	1a671f2877	override new RadioLib's default current limit value (60 mA) to the previous value of 100mA	2021-09-08 14:30:52 +03:00
Kevin Hester	17a1262382	pull in new epaper lib (which required importing configuration.h everywhere ... for dumb reasons)	2021-06-27 10:56:28 -07:00
Kevin Hester	babc1b3613	include file/lineno in critical error logs	2021-04-29 09:52:15 +08:00
Kevin Hester	5fdcb72d46	cleanup applyModemConfig based on porduino testing, share with sim	2021-03-30 23:34:13 +08:00
Kevin Hester	5ceee50bb5	bug: we've always been setting gpio 0 as an input on rf95 based devices ... found because portduino provides full visibility to all IO operations to the hw simulator.	2021-01-02 11:23:18 +08:00
Kevin Hester	186a52172c	fix #577 don't make invalid radio settings reboot the board ... instead raise a critical fault (note though: this is still not ideal because the radio will be in an undefined state until valid settings are used)	2020-12-27 13:09:20 +08:00
Kevin Hester	7a4b8cde11	keep rf95 max power at 20 dBm so users don't smoke their boards	2020-10-08 10:51:31 +08:00
Kevin Hester	113859e791	increase sx1272 max power ... +#define MAX_POWER 27 // if we use 20 we are limited to 1% duty cycle or hw might overheat. For continuous operation set a limit of 17 +// In theory up to 27 dBm is possible, but the modules installed in most radios can cope with a max of 20. So BIG WARNING +// if you set power to something higher than 17 or 20 you might fry your board.	2020-10-08 09:57:59 +08:00
Kevin Hester	7a5832ab8a	SX1262: fix serious bug with detecting if we have a rx packet in progress ... Could cause hangs on the way into sleep (and enormous power consumption). Instead of checking for rx packet length (which only changes at completion) check if we've received preamble bits but haven't yet received a completed packet interrupt. notes: wait to sleep loop problem radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 Can not send yet, busyRx radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 vs normal run radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 radio wait to sleep, txEmpty=0 Starting low level send (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted) Completed sending (id=0x53fe1dd0 Fr0xe5 To0xff, WantAck0, HopLim3 encrypted)	2020-10-07 13:43:51 +08:00
geeksville	c6d93d1a28	fix #346 limit tx power in japan	2020-09-15 18:54:50 -07:00
geeksville	7d4058f49d	let users set 20 dBm if they wish	2020-09-15 18:00:21 -07:00
geeksville	31fc8fafec	make default power level radio chipset specific	2020-09-15 17:55:33 -07:00
geeksville	98dfecdb79	Add external RF switch management for RF95 (needed for RAK815)	2020-07-13 13:18:32 -07:00
geeksville	e12c057c31	RAK815 lora works	2020-07-10 14:37:01 -07:00
geeksville	79c61cf0e0	limit max power on rf95 to 17 (rather than 20, because 20 can... ... burn up parts if you exceed 1% duty cycle)	2020-05-02 19:52:37 -07:00
geeksville	50213d8323	move packet handling into its own thread	2020-05-01 12:11:04 -07:00
geeksville	71fcdba017	cleanup directory structure	2020-05-01 09:04:00 -07:00