5562 Commits

Author	SHA1	Message	Date
Andrew Yong	58743021c8	XIAO BLE cleanup (supporting changes to seeed_xiao_nrf52840_kit too) (#7024) ... * chore(seeed_xiao_nrf52840_kit): Use build flag for L76K GNSS, rename variant.h ifdef Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Support multiple SX126x pinouts via build flags Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Pin D0 as user button if pin is unused Signed-off-by: Andrew Yong <me@ndoo.sg> * feat: EBYTE E22 and NiceRF gain and SX1262 max power defines Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(xiao_ble): Move variant to DIY and extend from seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(seeed_xiao_nrf52840_kit): Pin D6, D7 as I2C SDA, SCL if pins are unused Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-19 18:51:33 -05:00
Justin E. Mann	2fb46ce5d5	Add rak12035 VB Soil Monitor Tested & Working (#6741) ... * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * [WIP] Add RAK12035VB Soil Moisture Sensor support Introduce the RAK12035 sensor as an environmental telemetry sensor, including necessary calibration checks and default values. Update relevant files to integrate the sensor into the existing telemetry system. This hardware is not just one module, but a couple.. RAK12023 and RAK12035 is the component stack, the RAK12023 does not seem to matter much and allows for multiple RAK12035 devices to be used. Co-Authored-By: @Justin-Mann * Update to 1.0.4 release of RAK12035_SoilMoisture * cleanup * cool * . * .. * little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500 looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500. improvements could be made around the configuration of the monitor. next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity. * . comments about current limitations and TODOs * trunk update * trying to autoformat.. * fix formatting attempt 2 * .. * ... * ... * . * some corrections and local build success * correction in temp code * grr formatting * cleanup after a few experiments * remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos. * update some values in varient for rak wistap * working out trunk formatting.. * wip . corrections to other build variants * . * protobuffs? * protobufs? * Update protobufs ref * Protobufs ref * Trunk * Update RAK12035Sensor.cpp * Fmt * comment changes * dumb mistakes... resolved, actually built and tested.. all good.. * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * . proto submod * proto * proto * merge master * mabe a fix for GPS pin conflict, waiting on a new gps module to try * merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035 * . * . --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-06-19 18:51:03 -05:00
Marek	8be76a56c7	PacketHistory - option to track entries' aging to log (#7067) ... * PacketHistory debloat RAM allocations * Removed FLOOD_EXPIRE_TIME option. We have static buffer now. * Remove mx_ prefix from recentPackets * Remember no less than 100 packet not to make reflood hell * Cleanup * PacketHistory max no less than 100 * no less than 100 means max of 100 or a given value of course. * Care to not do duplicate entries. Cleanups. * Packet History - option to log aging of entries * Update comments for PACKET_HISTORY_TRACE_AGING and VERBOSE_PACKET_HISTORY definitions --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-19 18:48:35 -05:00
Jeremiah K	56e67cb434	Fix position exchange throttling issue (#7079) ... * Fix position exchange throttling race condition Separate tracking of position broadcasts vs replies to fix exchange position functionality. Previously, allocReply() would refuse to send position replies if any position packet (broadcast or reply) was sent within the last 3 minutes. This caused the exchange position feature to fail when a device had recently sent a position broadcast. Changes: - Add lastSentReply member to track position reply timestamps separately - Update allocReply() to only throttle based on previous replies, not broadcasts - This allows position exchange to work even after recent position broadcasts The fix maintains the 3-minute throttling for replies to prevent spam while allowing legitimate position exchange functionality to work properly. * Remove unused lastSentToMesh variable Variable was no longer used after separating reply throttling logic.	2025-06-19 18:20:20 -05:00
Matt Smith	e9d5e36738	Replace blocking delay for wifi reconnect with non-blocking to keep button/display interactivity (#6983) ... * Update WiFiAPClient.cpp to replace blocking delay() with non-blocking * Update WiFiAPClient.cpp - fix extra endif * Update WiFiAPClient.cpp remove duplicate section * Update WiFiAPClient.cpp * Update trunk_annotate_pr.yml * Update trunk_annotate_pr.yml * Update trunk_check.yml * Update trunk_check.yml * Update trunk_format_pr.yml * Update trunk_annotate_pr.yml * Attempted to address comments, and fix my other mess. Thanks for your patience. * Revert "Update trunk_annotate_pr.yml" This reverts commit 7db4ff6444. * Last mess cleanups (hopefully) * Undid trunk.yaml changes * Trunk format --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-19 18:18:55 -05:00
Jonathan Bennett	f71fdef3fd	Update HostMetrics.cpp - don't try to print the user string (#7081) ... * Update HostMetrics.cpp - don't try to print the user string * Make Trunk Happy	2025-06-19 17:05:22 -05:00
Jonathan Bennett	5e92145324	Ensure incoming hostMetrics userstring is null terminated (#7068) ... * Ensure incoming hostMetrics userstring is null terminated * Only null terminate user_string when has_user_string is true	2025-06-18 16:41:43 -05:00
Marek Veselý	20991d8b53	Add recognition for SHT40 with serial number starting with 0xc8d (#7061) ... * Add recognition for SHT40 with serial number starting with 0xc8d * fix a dumb typo :/	2025-06-18 06:19:52 -05:00
Jonathan Bennett	3ab9005b2f	Make sure host_metrics user_string is null terminated	2025-06-17 11:11:36 -05:00
Marek	aabc5b7cf2	PacketHistory debloat RAM allocations (#7034) ... * PacketHistory debloat RAM allocations * Removed FLOOD_EXPIRE_TIME option. We have static buffer now. * Remove mx_ prefix from recentPackets * Remember no less than 100 packet not to make reflood hell * Cleanup * PacketHistory max no less than 100 * no less than 100 means max of 100 or a given value of course. * Care to not do duplicate entries. Cleanups. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-17 07:18:59 -05:00
Nivek-domo	1a6bb97f16	Fix RCWL9620Sensor for rak11310 support (#6617) ... * Update RCWL9620Sensor.cpp test on rak11310, work very wel now * Update RCWL9620Sensor.cpp * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-16 06:54:55 -05:00
todd-herbert	465fe18a89	Dismiss ExternalNotification nagging on InkHUD button press (#7056) ... * Expose ExternalNotification::isNagging * Dismiss external notification on button press	2025-06-16 06:09:55 -05:00
Andy Shinn	f1dd623ce9	allow overriding INA3221 channels (#7035) ... Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>	2025-06-15 07:39:49 -05:00
Ben Meadors	ac52edd11a	Add the ability to share ignored contacts (for blacklisting problematic nodes) (#7044)	2025-06-15 07:34:03 -05:00
github-actions[bot]	66d5dde956	[create-pull-request] automated change (#7043) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-06-15 06:45:00 -05:00
Jonathan Bennett	e623c70bd0	More clear key warning messages.	2025-06-14 19:35:57 -05:00
Jonathan Bennett	1557219bad	More low-entropy keys, and don't issue a false warning when changing … (#7041) ... * More low-entropy keys, and don't issue a false warning when changing node name * CopyPasta Wasn't Tasty * When the phone sets the publickey size to 0, regenerate right away	2025-06-14 17:09:22 -05:00
Csrutil	5d0bf03b01	add support for GAT562 Mesh Trial Tracker (#6984) ... * add support for GAT562 Mesh Trial Tracker * Hardware Model Definition for GAT562_MESH_TRIAL_TRACKER * Added RAK4630 for led pin 2 (blue) * Added RAK4630 for led pin 2 (blue) comment * don't touch src/mesh/NodeDB.cpp * set fixed baudrate for gat562_mesh_trial_tracker * adjust the order of the HW_VENDOR defines --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-06-13 17:27:48 +10:00
Jonathan Bennett	8ff99437cb	Don't include the blank hash	2025-06-12 22:56:40 -05:00
todd-herbert	ba93097bb7	Add InkHUD driver for WeAct Studio 1.54" display module (#7000) ... * Strip redundant code from E-Ink driver * Begin polling for E-Ink update completion sooner In some cases, we might be waiting longer than we need to. * E-Ink driver for WeAct 1.54" display Currently identical to the popular GDEY0154D67 model. Kept separate now in case the drivers need to diverge in future. * Put back code which sets the number of gate lines	2025-06-12 19:59:28 -05:00
todd-herbert	de098cca4c	E-Ink driver for WEAct 2.13" BW (#7001)	2025-06-12 19:58:38 -05:00
Christian Crank	8faa04afdb	Validate short and long names so whitespace or empty names cannot be used (#6993) ... * Say issue #6867 about adding validation for long_name and short_name. Firmware should expect at least 1 non-whitespace character for both long_name and short_name. added the USERPREFS_CONFIG_DEVICE_ROLE example to userPrefs.jsonc * Validation for user long_name and short_name implemented. No longer can use whitespace characters. Return BAD_REQUEST error responses when validation fails and warning logs when validation rejects invalid names. * Improve whitespace validation for user names with ctype.h, ensure logging works * Add whitespace validation to ham mode to prevent validation bypass and to match python cli command * punctuation change --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-12 19:58:15 -05:00
Chloe Bethel	4e6418b635	Don't use assert() with side effects in a couple more places (#7009) ... * Don't use assert for Lock * Don't use assert for MQTT messages * Split assert in getMacAddr to always run the function --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-12 19:55:35 -05:00
Jonathan Bennett	a1a5503fe9	Another known key	2025-06-12 15:18:26 -05:00
Jonathan Bennett	3b94981e56	Key erase (#7018) ... * Wipe keys if low entropy * Client Notification Payload variant * Don't call service before it's created * Lucky Number 14 * Catch for low-entropy keys even before region is set	2025-06-12 12:13:39 -05:00
github-actions[bot]	5f0c8863fd	[create-pull-request] automated change (#7019) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-11 20:18:47 -05:00
Jonathan Bennett	e5f6804421	Add boolean to only warn a user of a duplicated key once per boot	2025-06-10 13:28:36 -05:00
github-actions[bot]	693b11db1d	[create-pull-request] automated change (#7007) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-06-10 06:47:41 -05:00
Jonathan Bennett	4bf2dd04ae	Warn users about low entropy keys (#7003) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-10 06:33:13 -05:00
Andreas 'count' Kotes	c6c2a4d4dd	Improve support for Heltec Wireless Bridge (#6647) ... * Use BLE_LED where present for CONNECTED/DISCONNECTED * Use WIFI_LED where present for WiFi started/stopped (as AP) or connected/disconnected (as Station) * improve support for Heltec Wireless Bridge * satisfy 'trunk fmt'	2025-06-10 13:54:07 +10:00
Clément Hampaï	1eacdd0629	[Variant] nomadstar meteor pro (#6742) ... * Initial support for NomadStar Meteor Pro * Cleaned up Platformio variant comments * Removed RTC & ETH deps. * Removed RGB NCP5623 deps, Enabled AmbientLight by default * Added HWID mapping * Updated Armduino-Semihosting lib dep with archived version. * Fixed trunk linting in AmbientLightingThread.h and hydra variant	2025-06-10 07:48:52 +10:00
HarukiToreda	3dec521f75	T-watch screen misalignment fix (#6996) ... * T-watch screen misalignment fix * Trunk fix	2025-06-09 05:27:52 -05:00
Christian Crank	b8970d66a1	Addition of Device Role inside of userPrefs.jsonc (#6972) ... * addition of device.role via userprefs. USERPREFS_CONFIG_DEVICE_ROLE now usable, ROUTER*, LOST_AND_FOUND, and REPEATER disabled. * Removing added IS_ONE_OF macro definition since meshUtils.h exists - thanks Ben! * Fix clang-format issues in NodeDB.cpp utilizing Trunk	2025-06-08 16:51:37 +10:00
github-actions[bot]	91579c4650	[create-pull-request] automated change (#6980) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-06-07 06:55:25 -05:00
Andrew Yong	79b710a108	fix: Respect LED_STATE_ON for power and user LED (#6976) ... Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-07 06:44:54 -05:00
todd-herbert	ba296db701	Add InkHUD driver for WeAct Studio 2.9" display module (#6963) ... * Driver for WeAct Studio 2.9" ePaper module * Clarify that flex connector marking is not a unique id --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-06-06 17:35:47 +12:00
Andrew Yong	070deb290f	seeed_xiao_nrf52840_kit improvements (#6930) ... * feat: seeed_xiao_nrf52840_kit improvements - LEDs: - Change RGB LED to be active low as it is common anode - Remove re-definition of LED_PIN - Use red LED to indicate flash writes - Use blue LED as user LED (External Notification module) - GPIO: Re-word unused BUTTON_PIN comment - Wire: Set I2C pins to match XIAO nRF52840 Sense's LSM6DS3TR IMU - Battery: - Use charge LED to detect charging state - Move voltage divider boilerplate out of src/main.cpp and into initVariant() - Fix dependencies for above in related XIAO BLE DIY variants Build tested variants: - seeed_xiao_nrf52840_kit - xiao_ble - seeed-xiao-nrf52840-wio-sx1262 Flashed to and tested on hardware: - seeed_xiao_nrf52840_kit Signed-off-by: Andrew Yong <me@ndoo.sg> * chore(seeed_xiao_nrf52840_kit): Re-order generic GPIO definitions Signed-off-by: Andrew Yong <me@ndoo.sg> * chore: Use ADC_CTRL for XIAO nRF52840 Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-06-05 06:45:43 -05:00
Jonathan Bennett	55b2bbf937	Generate keys when Lora Region is set (#6951) ... * Generate keys when Lora Region changes * Nest the ifs * Even more entropy * Namespacing	2025-06-04 12:16:37 -05:00
Jonathan Bennett	5cd74f4b53	Don't give LOG_INFO a null	2025-06-01 21:03:38 -05:00
ArgoNavi	f9d4fdbb52	Update TSL2591Sensor.cpp (#6921) ... Lower gain and timing to avoid saturation in bright light	2025-05-30 06:00:20 -05:00
Ben Meadors	7a7166d575	Revert "Add a new screen for heltec_wireless_paper. (#6894)" (#6918) ... This reverts commit ba53543354.	2025-05-29 10:17:20 -05:00
Quency-D	ba53543354	Add a new screen for heltec_wireless_paper. (#6894) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:10:25 -05:00
dmarman	cb9429e83e	Added full support for LTR390UV readings of UV and Lux (#6872) ... * Added full support for LTR390UV readings of UV and Lux * Trunk formatting * Added full support for LTR390UV readings of UV and Lux * Trunk formatting * fix library check and unnecessary bit resolution change * fixed log info messages and removed unused dependency * Hopefully fixes git mess * fix variable scope and getMetrics returns * set metrics flags bavk to false in case something wrong happens while reading LTR390UV mode --------- Co-authored-by: Domingo <domingo@waxman.local> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-29 09:09:33 -05:00
dylanli	c0c2ec195f	add support for seeed wio tracker L1 (#6907) ... * add support for seeed wio tracker l1 * add support in nrf52 arch * fix ADC problem and comments incorrect * fix gps wakeup pin * fix gps pin	2025-05-29 06:33:22 -05:00
todd-herbert	5195815df0	Parse own short name in LogoApplet (#6913)	2025-05-29 06:21:09 -05:00
Ben Meadors	42a80d8aed	Coerce user.id to always be derive from the nodenum (#6906) ... * Coerce user.id to always be derive from the nodenum * Additionally null it out on send * Revert "Additionally null it out on send" This reverts commit 22a2d68723.	2025-05-28 11:30:59 -05:00
github-actions[bot]	da69d88790	[create-pull-request] automated change (#6909) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-28 06:20:51 -05:00
Thomas Göttgens	96c18d9908	Add LINK32 (Lilygo) Board with Light+Environment sensors (#6899) ... * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Add LINK32 (Lilygo) Board with Light+Environment sensors TODO: replace PRIVATE_HW with actual HWID * Update to real HWID and trunk fmt	2025-05-27 18:11:32 -05:00
GUVWAF	8908805894	Don't cancel sending ReTx for relayer if we're ROUTER(_LATE)/REPEATER (#6904) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-27 18:10:14 -05:00
github-actions[bot]	158c88ddef	[create-pull-request] automated change (#6905) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2025-05-27 15:41:35 -05:00
todd-herbert	f223b8a55d	Add missing parsing of UTF-8 chars (#6889)	2025-05-25 13:12:52 -05:00
Ben Meadors	75a49d3486	Add heap metrics to Local stats (#6887)	2025-05-25 11:08:56 -05:00
Michael Cullen	7d95b487ef	Add PCT2075 Temperature Sensor (#6829) ... This is an I2C temperature sensor. It is intended to be a drop-in compatible sensor for the LM75, however it is more accurate. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 07:29:02 -05:00
Ben Meadors	2e72850d99	Fix is_unmessagable plumbing (#6886)	2025-05-25 07:24:28 -05:00
github-actions[bot]	c47bdd11f9	[create-pull-request] automated change (#6885) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-25 06:56:21 -05:00
Andrew Yong	e29588d2e2	feat(RadioInterface): Tx power gain calculation rework (#6796) ... - Rename REGULATORY_GAIN_LORA to TX_GAIN_LORA - Move gain-based Tx power clamping from RadioInterface::applyModemConfig() to RadioInterface::limitPower() - User-configured Tx power now matches the Tx power out of the device connector - Re-order [LoRa Chip]Interface.cpp limitPower() to take place before the final Tx power clamping so we clamp based on the pre-PA Tx power rather than user-configured Tx power Tested on XIAO BLE variant. Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-25 06:26:31 -05:00
Chiho Sin	9b69c2a9af	graphics: Add GDEY0213B74 E-Ink display driver (#6879) ... Implement the GDEY0213B74 driver with configuration methods for scanning, waveform, update sequence, and polling for refresh completion. This driver supports both fast and full update types for the 2.13 inch E-Ink display. Signed-off-by: ChihoSin chihosin@icloud.com Signed-off-by: ChihoSin chihosin@icloud.com	2025-05-25 06:08:41 -05:00
Ben Meadors	beba1b4882	Added map report precision bounds (#6862) ... * Added map report precision bounds * Log warning * Precision range should be 12-15 * Missed commit * Update tests * That method was renamed * Removed now-defunct test call * Remove defunct test	2025-05-22 20:33:46 -05:00
todd-herbert	ba1ef45024	InkHUD Extended ASCII (#6768) ... * Custom AdafruitGFX fonts with extended ASCII encodings * AppletFont handles re-encoding of UTF-8 text * Manual parsing of text which may contain non-ASCII chars * Display emoji reactions, even when unprintable Important to indicate to users that a message has been received, even if meaning is unclear. * Superstitious shrink_to_fit I don't think these help, but they're not hurting! * Use Windows-1252 fonts by default * Spelling * Tidy up nicheGraphics.h * Documentation * Fix inverted logic Slipped in during a last minute renaming while tidying up to push..	2025-05-22 18:16:53 -05:00
Ben Meadors	7cd50d7044	If a contact is add from a QR, it's "verified" manually (#6858) ... * If a contact is add from a QR, it's "verified" manually * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-22 07:40:36 -05:00
Jonathan Bennett	41c1b29d70	Add basic handling for is_manually_validated (#6856)	2025-05-20 21:29:29 -05:00
Ben Meadors	6041357cbb	Increase the debt ceiling	2025-05-20 20:31:01 -05:00
github-actions[bot]	cf3f35d566	[create-pull-request] automated change (#6857) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-20 19:51:03 -05:00
Jonathan Bennett	e0f878872f	Hostmetrics user string (#6850)	2025-05-20 13:04:05 -05:00
HarukiToreda	16994c8725	Fix for ICM-20948 not initializing (#6827) ... * Fix for ICM-20948 not initializing * trunk fix	2025-05-19 06:49:38 -05:00
Jonathan Bennett	61e4eb12e6	Use the _init_zero macro correctly for HostMetrics (#6837)	2025-05-17 14:02:39 -05:00
github-actions[bot]	5b312ab917	[create-pull-request] automated change (#6836) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2025-05-17 12:29:18 -05:00
github-actions[bot]	a50a94150a	[create-pull-request] automated change (#6834) ... Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com>	2025-05-17 10:44:02 -05:00
Jonathan Bennett	066609a718	Remove incomplete compass boot calibration (#6825) ... The made it in from testing unintentionally.	2025-05-16 12:29:08 +10:00
Jonathan Bennett	1ef4caea05	Host metrics (#6817) ... * Add std::string exec() function to PortduinoGlue for future work * MVP for HostMetrics module. * Fix compilation for other targets * Remove extra debug calls * Big numbers don't do well as INTs. * Add HostMetrics to config.yaml	2025-05-15 09:23:37 -05:00
Austin	7d8f9c7f6d	Stop the madness! Run as a user (not root) (#6718) ... * Stop the madness! Run as a user (not root) * Trigger fsdir migration for < 2.6.9 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-15 06:40:46 -05:00
Tom Fifield	6bba17d463	Add suppport for Quectel L80 (#6803) ... * Add suppport for Quectel L80 Another PMTK family chip, requires only a modification to the probe code. * Update support for L80 based on testing.	2025-05-15 19:26:41 +10:00
github-actions[bot]	ed6de5095e	[create-pull-request] automated change (#6815) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-14 17:54:21 -05:00
Ben Meadors	7cffd9ba70	Added new map report opt-in for compliance and limit map report (and default) to one hour (#6813) ... * Added new map report opt-in for compliance and limit map report (and default) to one hour * Trunk	2025-05-14 15:31:28 -05:00
Ben Meadors	fc64bea698	Unmessagable implementation and defaults (#6811) ... * Unmessagable implementation and defaults * Router and router late are unmessagable by default * Update src/modules/AdminModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 15:28:09 -05:00
github-actions[bot]	a51a6b8c47	[create-pull-request] automated change (#6812) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-14 14:41:37 -05:00
github-actions[bot]	bc313da064	[create-pull-request] automated change (#6810) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-14 13:48:14 -05:00
Austin	f16402dec1	MQTT userprefs (#6802)	2025-05-14 13:39:46 -05:00
todd-herbert	feafd2bc0c	Protect T-Echo's touch button against phantom presses in OLED UI (#6735) ... * Guard T-Echo touch button during LoRa TX * Guard for T-Echo only --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-14 06:33:51 -05:00
Ben Meadors	94af3bd1ab	Formatting	2025-05-14 06:31:18 -05:00
Richard Zhang	d9ad2322e8	Fixes BUG #6243 Heltec Tracker (#6781) ... * fix wireless tracker screen issues * fix SHTC3 BUG * Remove the 32K crystal oscillator option for the Wireless Paper and Vision Master series. * Correct spelling errors * Update src/graphics/Screen.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-14 06:29:05 -05:00
Ben Meadors	0a8bd1e4be	Add contact admin message (for QR code) (#6806)	2025-05-14 05:33:51 -05:00
Thomas Göttgens	cc66f7c79b	Crowpanel 4.3, 5.0, 7.0 support (#6611) ... * SD software SPI control * fix notification crash; * allow wake on touch * don't build non-MUI variants * use pwm buzzer * Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5 * add hardware ID for TFT panels * Add stubs for the bigger panels. WIP! * fix braces * elecrow 4.3, 5.0, 7.0 support * completed implementation 4.3, 5.0, 7.0 variants * NodeDB default config & simplified light sleep macros * trunk fmt * remove flags * removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows) --------- Co-authored-by: mverch67 <manuel.verch@gmx.de> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-05-13 14:15:52 +02:00
github-actions[bot]	e1417cff2e	[create-pull-request] automated change (#6804) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-13 06:59:26 -05:00
Ben Meadors	b9fcd9da23	Add some no-nonsense coercion for self-reporting node values (#6793) ... * Add some no-nonsense coercion for self-reporting node values * Update src/mesh/PhoneAPI.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-05-11 18:08:29 -05:00
Ben Meadors	2a06b058fd	Only send nodes on want_config of 69421 (#6792)	2025-05-11 15:18:53 -05:00
Tom	62e1974d09	Add clarifying note about AHT20 also being included with AHT10 library (#6787) ... * Update AHT10.h Add clarifying note about AHT20 also being included * Update AHT10.cpp Add clarifying note about AHT20 also being included	2025-05-11 17:17:37 +08:00
Ben Meadors	981ecfdb61	Add client notification before role based power saving (sleep) (#6759) ... * Add client notification before role based power saving (sleep) * Unsigned	2025-05-07 21:20:32 -05:00
Jonathan Bennett	3a6fc668d8	20948 compass support (#6707) ... * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Switch to Meshtastic ICM-20948 lib for Portduino support * Use 20948 for compass direction * Compass is more than just RAK4631 * Cleanup for 20948 compass * use Meshtastic branch of 20948 lib * Check for HAS_SCREEN for showing calibration screen * No accelerometerThread on STM32	2025-05-07 18:38:42 -05:00
Ben Meadors	6f256c06f6	Fix warning	2025-05-07 09:26:10 -05:00
Austin	62421a83fd	Fix EVENT_MODE on mqttless targets (#6750)	2025-05-06 13:12:25 -04:00
github-actions[bot]	d75c91a760	[create-pull-request] automated change (#6732) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-05-04 08:39:59 -05:00
Austin	152b8b1b02	Revert "router: on linux add a mutex around the queue (#6709)" (#6726) ... This reverts commit 987623567a.	2025-05-02 13:53:25 -04:00
todd-herbert	10693c4569	Lock SPI bus while in use by InkHUD (#6719) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-05-02 06:20:56 -05:00
Ferdia McKeogh	947191a797	Add PA1010D GPS support (#6691)	2025-05-02 10:11:09 +08:00
Jorropo	987623567a	router: on linux add a mutex around the queue (#6709) ... UDP reception happens on an other thread, avoid data races and potential data corruption issues.	2025-05-01 06:32:20 -05:00
Manuel	a8ab6e82e6	MUI framebuffer support (#6703) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 20:50:30 -05:00
todd-herbert	5c005aaed5	Restore InkHUD to defaults on factory reset (#6637) ... * Erase InkHUD settings on factory reset * Documentation * Captialn't Lower case m. Also move the include statement to .cpp, because it doesn't really need to be in the .h	2025-05-01 12:28:05 +12:00
Jonathan Bennett	845088e45b	Add 100 msecond delay in tft_task_handler when deviceScreen is null (#6695) ... * Add 100 msecond delay in tft_task_handler when deviceScreen is null, to fix 100% usage bug * move portduino tft task creation into tftSetup * remove superfluous check * update platform-native commit --------- Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-30 06:17:24 -05:00
Ben Meadors	e0b1fdb5e8	Rate limit waypoints and alerts and increase to allow every 10 seconds instead of 5 (#6699) ... * Rate limit waypoints and alerts and increase to allow every 10 seconds instead of 5. * Update src/mesh/PhoneAPI.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Doot --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-04-30 06:08:10 -05:00
Jorropo	a7ef9e9c08	udp-multicast: remove the thread from the multicast thread API (#6685) ... * udp-multicast: remove the thread from the multicast thread API The whole API is parallel & asynchronous we don't need to start a thread ourself, the implementation probably does when we call start listening already. * Take copilot advice and call it a handler --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-30 05:52:42 -05:00
Colin	72eae42b81	PMSA003I: add support for driving SET pin low while not actively taking a telemetry reading (#6569) ... * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * support manually shutting off power to the PMSA003I sensor when we aren't doing a telemetry reading * add comment about PMSA003I_WARMUP_MS to AirQualityTelemetry.cpp * fix typos, use arduino gpio defines instead of magic numbers * RAK4631: add PMSA003I_ENABLE_PIN define * fix indentation --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-29 06:31:01 -05:00
Jonathan Bennett	473ef1bc03	Step one of Linux Sensor support (#6673) ... * First addition of __has_include for sensor support * Add __has_include blocks for sensors * Put BMP and BME back in the right sensors * Make TelemetrySensor::setup() a pure virtual finction * Split environmental_base to environmental_extra, to compile the working sensor libs for Native * Remove hard-coded checks for ARCH_PORTDUINO * Un-clobber bmx160 * Move BusIO to environmental_extra due to Armv7 compile error * Move to forked BusIO for the moment * Enable HAS_SENSOR for Portduino * Move back to Adafruit BusIO after patch	2025-04-28 18:35:13 -05:00
GUVWAF	b1e35cd8b3	Fix preamble detected IRQ flag (#6653)	2025-04-22 14:21:29 -05:00
todd-herbert	70ced735d9	Correct a typing error in InkHUD display driver (#6651) ... * Fix LCMEN2R13EFC1 LUT A typing error when the driver was initially created. * Spelling..	2025-04-22 06:25:53 -05:00
Austin	8812eadd44	Revert "Add IP Address Frame (#6615)" (#6639) ... This reverts commit 5d48d2c0a7.	2025-04-20 09:49:21 -05:00
Ben Meadors	48dc0e014c	Revert "Lib Update (#6510)" (#6640) ... This reverts commit e2f6600cb9.	2025-04-20 09:48:07 -05:00
Nivek-domo	5d48d2c0a7	Add IP Address Frame (#6615) ... * Update Screen.cpp add ip on screen if has ethernet pcb like w5500 spi * Run Trunk Format and Translate Comments FR->EN --------- Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-04-20 20:06:39 +10:00
Nivek-domo	2b57ffafd7	Rak13800 Ethernet works on rak11310 too ... we can use rak13800 on rak11310 too	2025-04-20 18:51:01 +10:00
todd-herbert	74b3dc34e4	Fix crash when clearing NRF52 BLE bonds (#6609) ... * Fix crash before clearing BLE bonds * Prevent clients re-pairing BLE during factory reset Clients seem able to re-pair BLE after clearing bonds during factory reset, even after advertising disabled. This seems to primarily occur on Android devices, which seem to more actively maintain the BLE connection. As a workaround, `NRF52Bluetooth::shutdown` swaps the BLE pairing callback to one which actively rejects new connections. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-17 17:11:42 -05:00
Thomas Göttgens	e2f6600cb9	Lib Update (#6510) ... * Lib Update Draft because PIN display doesn't work yet. * pin entry still no worky * Fix for missing PIN code issue (#6574) --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Alexander Begoon <alex@begoonlab.tech>	2025-04-17 15:58:28 -05:00
Thomas Göttgens	ef14967fbf	Crowpanel 2.4,2.8 and 3.5 support (#6355) ... Co-authored-by: mverch67 <manuel.verch@gmx.de>	2025-04-17 16:03:37 +02:00
github-actions[bot]	c177c6d655	[create-pull-request] automated change (#6610) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2025-04-17 05:33:42 -05:00
Benjamin Kyd	a36f21b29a	Fix compiler error in PowerFSM when WiFi is excluded (#6603)	2025-04-17 11:36:19 +02:00
dylanli	d74359abf0	add support for Seeed solar panel (#6597) ... * add seeed_solar_node * fix RF_SW problem * fix IIC problem * Update Button redefination * Add on-board flash pin defination * fix missing a ',' * update seeed sorlar panel defination * fix word spell * fix upstream change * fix upstream change * fix upstream change * fix formate * Restore the FLASH definition that was deleted by mistake and pull down the CS pin to ensure low power consumption * fix led defination conflict * Delete lib/device-ui directory * Restore protobufs submodule --------- Co-authored-by: WayenWeng <jinyuan.weng@seeed.cc>	2025-04-17 16:11:17 +10:00
Benjamin Kyd	5fd64d4114	Fix uninitialised memory read (adminModule) (#6605)	2025-04-16 14:42:08 -05:00
Aaron.Lee	e5cd0d613c	Make startup screen show the short ID (#6591) ... * Update the short ID show on the boot up screen function	2025-04-16 11:20:12 +02:00
Benjamin Kyd	64c8bde04a	Update platformio.ini to exclude unused modules from t1000-e (#6584) ... * Update platformio.ini to exclude unused modules * Add No EXT GPIO flag and also correct some exclusions in main * CANNEDMSG != CANNEDMESSAGES * Remove NO_EXT_GPIO	2025-04-16 10:12:23 +02:00
github-actions[bot]	4477031971	[create-pull-request] automated change (#6599)	2025-04-16 09:46:06 +02:00
todd-herbert	cf5c8de92e	Fix spurious button presses on some T-Echos (#6590) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-15 20:33:44 -05:00
Tom Fifield	98411d408a	Trunk fixes for heltec mesh pocket. (#6588) ... https://github.com/meshtastic/firmware/pull/6533 was merged without running trunk. This patch fixes the newly introduced trunk errors.	2025-04-15 16:37:09 -05:00
Ben Meadors	040a34fca8	Switch to actually maintained thingsboard pubsubclient (#5204) ... * Switch to actually maintained thingsboard pubsubclient * .0 * TBPubSubClient * SetBufferSize is split into Send and Receive. * Update TBPubSubClient to 2.11 * Update platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Re-add setBufferSize fix --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Austin <vidplace7@gmail.com>	2025-04-15 10:50:24 -05:00
github-actions[bot]	4e30023a4b	[create-pull-request] automated change (#6589) ... Co-authored-by: fifieldt <1287116+fifieldt@users.noreply.github.com>	2025-04-15 06:41:33 -05:00
Aaron.Lee	b46aad85cc	Add new hardware: Heltec MeshPocket (#6533) ... * Add Heltec MeshPocket. * MeshPocket source code update * Optimiz code for refresh border during full update. * Update Heltec MeshPocket json file info.	2025-04-15 13:34:30 +10:00
Tavis	e7ce910c3b	Add generic thread module (#5484) ... * compiling, untested * use INCLUDE not EXLUDE for option to include module * protobuf update * working genericthread module Update protobufs * use EXCLUDE style instead of INCLUDE * Update Modules.cpp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-11 19:38:44 +02:00
todd-herbert	06ce6f3e8a	fix: remove redundant GPS code targeting Heltec T114 (#6497)	2025-04-10 09:48:40 +10:00
todd-herbert	536b6d87c6	InkHUD support for LilyGo T3S3 E-Paper (#6503) ... * Purge an incomplete E-Ink driver * Use the deep-sleep mode of SSD16XX E-Ink displays * TwoButton doesn't need to store pin mode * Fix false positive button presses after light sleep * E-Ink driver for DEPG0213BNS800 * InkHUD support for LilyGo T3S3 E-paper --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 10:41:51 -05:00
GUVWAF	69f938ea98	Send UDP packet even if it's encrypted (#6524) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-09 06:13:49 -05:00
Ikko Eltociear Ashimine	1b1d4625aa	chore: update ubx.h (#6522) ... usefull -> useful	2025-04-08 14:04:33 -05:00
Thomas Göttgens	c94dd1e331	Minor adjustment of blink codes and 'unstick' the M2 button. (#6521)	2025-04-08 10:46:39 -05:00
Thomas Göttgens	a084073cc1	inkhud doesn't have a button thread (#6513)	2025-04-07 08:35:51 -05:00
Thomas Göttgens	606abfc116	Fix several features of M1 and M2 (i know what the 7 is now ...) (#6507) ... * Fix several features of M1 and M2 (i know what the 7 is now ...) * 'THe' should be 'The'. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * remove floating definition --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-07 05:46:22 -05:00
github-actions[bot]	860e8eca5a	[create-pull-request] automated change (#6511) ... Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com>	2025-04-07 11:51:05 +02:00
Chris LaFlash	56eb0c08b2	Add support for Quectel-L96, a MT3333 module (#6498)	2025-04-06 11:49:01 +08:00
Nasimovy	1b33189fe6	remove duplicate HAS_LP5562 introduced by #6422 (#6494)	2025-04-04 08:35:15 -05:00
todd-herbert	25237a15ff	feat: menu entry to send adhoc-ping (#6492)	2025-04-04 05:53:54 -05:00
Ben Meadors	0110275494	Revert "Try-fix ESP32 wifi disconnects (#6363)" (#6493) ... This reverts commit a902776e57.	2025-04-04 04:59:31 -05:00
github-actions[bot]	4dfba50304	[create-pull-request] automated change (#6490) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-04-03 20:23:44 -05:00
Nasimovy	7494106170	TCA8418 initial config + basic 3x4 keypad config (#6422) ... * TCA8418 with base config for 3x4 keypad * replaced k with uppercase K * change detection method * reflect changes #6381 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-03 14:18:18 -05:00
rcarteraz	1017f6af35	remove very long slow (#6486)	2025-04-03 09:07:43 -05:00
Thomas Göttgens	594cb0cc1e	reinstate M1 Backlight (#6484)	2025-04-02 19:15:12 -05:00
Austin	ef18a9b5b5	meshtasticd: Set available.d dir in yaml (#6481)	2025-04-02 06:55:14 -05:00
Clément Hampaï	f6ed10f329	Added initial support for Texas Instruments LP5562 (#6381) ... * Added initial support for Texas Instrument LP5562 * Added proper support for Ambient Lighting * Code merge for all RBG_LED enabled devices * Fixed forgotten log_info & added firstRGBLED()	2025-04-01 22:39:40 +02:00
Benjamin Faershtein	644849126c	Fixes #6315 (#6475) ... * Fixed Canned Messages send to non broadcast * Small fix * Fix formatting for singular canned message * Trunk fmt --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-04-01 12:50:10 -05:00
Manuel	ea4ce8d827	MUI unPhone-tft: fix defaults (#6477)	2025-04-01 08:53:15 -05:00
todd-herbert	128c347c64	fix: T-Echo frontlight on at boot when using OLED UI (#6474)	2025-04-01 05:26:46 -05:00
Austin	2c01fad798	meshtasticd: Add FrequencyLabs MeshAdv-Mini Hat (#6458)	2025-03-31 07:31:54 -05:00
Ben Meadors	a5efbfccd7	Disable bluetooth config on rp2040, portduino (for now), and stm32 (#6465) ... * Disable bluetooth config on rp2040, portduino (for now), and stm32 * Add comments and exclude C6	2025-03-31 06:32:54 -05:00
todd-herbert	886bffe8f3	fix: honor user button customization (#6400) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-31 06:03:44 -05:00
Ben Meadors	39408fd3b1	Disable network config for non-eth_gateway nrf52 and non-W RP2040 targets (#6462) ... * Disable network config for non-eth_gateway nrf52 and non-W RP2040 targets * Use HAS_ETHERNET logic	2025-03-31 05:50:53 -05:00
Ben Meadors	72db671e00	Try-fix some import of configuration inconsistencies (#6364)	2025-03-31 09:54:27 +02:00
todd-herbert	bd2d2981c9	Add InkHUD driver for WeAct Studio 4.2" display module (#6384) ... * chore: todo.txt * chore: InkHUD documentation Word salad for maintainers * refactor: don't init system applets using onActivate System applets cannot be deactivated, so we will avoid using onActivate / onDeactivate methods entirely. * chore: update the example applets * fix: SSD16XX reset pulse Allow time for controller IC to wake. Aligns with manufacturer's suggestions. T-Echo button timing adjusted to prevent bouncing as a result(?) of slightly faster refreshes. * fix: allow timeout if display update fails Result is not graceful, but avoids total display lockup requiring power cycle. Typical cause of failure is poor wiring / power supply. * fix: improve display health on shutdown Two extra full refreshes, masquerading as a "shutting down" screen. One is drawn white-on-black, to really shake the pixels up. * feat: driver for display HINK_E042A87 As of Feb. 2025, these panels are used for "WeActStudio 4.2in B&W" display modules. * fix: inkhud rotation should default to 0 * Revert "chore: todo.txt" This reverts commit bea7df44a7. * fix: more generous timeout for display updates Previously this was tied to the expected duration of the update, but this didn't account for any delay if our polling thread got held up by an unrelated firmware task. * fix: don't use the full shutdown screen during reboot * fix: cooldown period during the display shutdown display sequence Observed to prevent border pixels from being locked in place with some residual charge?	2025-03-31 09:17:24 +02:00
todd-herbert	da26ff5b95	feat: more toggles for InkHUD menu (#6469) ... GPS on/off Wifi off -> Bluetooth on 12 / 24 hour clock	2025-03-31 09:15:54 +02:00
Austin	f18f60cd0b	meshtasticd: CH341 / HAT+ Auto Configuration (#6446)	2025-03-30 20:47:15 -05:00
Jason B. Cox	850d21dcb9	Add a static_assert to verify assumption about NodeInfoLite size (#6428) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-30 20:39:01 -05:00
Tavis	e08177ba98	update to handle ws80 as well (#6440) ... Small change to make the string parsing of Name = value less brittle. Adds a function to parse a line without knowing how many spaces are after the = sign. This allows it to also work with the ws80 serial output.	2025-03-30 20:38:24 -05:00
Mark Trevor Birss	b52c355f2f	Update ScreenFonts.h (#6412)	2025-03-30 20:37:08 -05:00
github-actions[bot]	e79d4492e8	[create-pull-request] automated change (#6468) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-03-30 20:33:22 -05:00
github-actions[bot]	32d91ed859	[create-pull-request] automated change (#6464) ... Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>	2025-03-30 14:35:51 -05:00
Ben Meadors	8a4a0cc932	Remove unused lfs_dir_tell function	2025-03-29 14:32:56 -05:00
Ben Meadors	cbcdc3ed00	fix STM32 build (#6455) ... Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-03-29 14:30:59 -05:00
Jason P	d663d44647	Fix Bold and Inverted Displays to actually show Uptime (#6413) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-29 08:21:57 -05:00
Thomas Göttgens	3148e7277d	Fix a couple of warnings (#6445) ... * Fix a couple of warnings * fix build error --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-29 08:14:24 -05:00
Thomas Göttgens	7df327664e	add missing C8H10N4O2	2025-03-29 14:13:01 +01:00
Ben Meadors	a902776e57	Try-fix ESP32 wifi disconnects (#6363) ... Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>	2025-03-29 07:18:03 -05:00
Thomas Göttgens	0491c890d7	recognize M1	2025-03-29 08:26:30 +01:00
Thomas Göttgens	6c7c0770f9	add ThinkNode M2 Support (#6354) ... * [WIP] Base firmware pending support for 2nd button * Update button behaviour. Still WIP * [WIP] Base firmware pending support for 2nd button * Update button behaviour. Still WIP * change env to lowercase Co-authored-by: rcarteraz <robert.l.carter2@gmail.com> * yea - well - what else is new? * fix secondary button behavior and update trunk --------- Co-authored-by: rcarteraz <robert.l.carter2@gmail.com>	2025-03-28 19:55:00 -05:00
Austin	02237f5ac6	Portduino: Return CH341 Product Strng (#6436)	2025-03-28 15:59:42 -05:00
Thomas Göttgens	4a12b4eb32	add Thinknode-M1 (#6435) ... * ThinkNode M1 * Update Epaper Driver * Your day isn't complete unless trunk has complained about your formatting at least once.	2025-03-28 21:22:17 +01:00
Marco Veneziano	d7504921fb	Add missing board definition for MESHLINK (#6404) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-28 06:45:04 -05:00
Austin	4e1030ef9c	Fix USERPREFS_EVENT_MODE compile error (#6408)	2025-03-28 06:31:24 -05:00
Ben Meadors	4590ef2e7b	Revert "TCA8418 initial config + basic 3x4 keypad config (#6320)" (#6410) ... This reverts commit 13101c1bab.	2025-03-27 08:31:57 -05:00
Mark Trevor Birss	6c17694b64	CrowPanel e-Ink Updates for 4.2 and 2.9 inch (#6401) ... * Update platformio.ini * Update EInkDisplay2.cpp * Update EInkDisplay2.h	2025-03-27 11:06:41 +02:00
Thomas Göttgens	640e731ad2	Remove button fix for further investigation	2025-03-26 15:18:21 +01:00
Thomas Göttgens	ba81a8ad87	Fix default pin assignment	2025-03-26 15:02:53 +01:00
Jorropo	6429eca5e4	udp-multicast: do not listen for incoming udp multicast packets if disabled (#6397) ... Currently the config flag only control if packets are sent, not received. As we discussed in VC this is not what was intended.	2025-03-26 18:10:56 +11:00
Nasimovy	13101c1bab	TCA8418 initial config + basic 3x4 keypad config (#6320) ... * add TCA8418 to configuration.h added the TCA8418 * add TCA8418 to ScanI2C.cpp add TCA8418 * add TCA8418KB to ScanI2C.h add TCA8418KB * add TCA8418KB ScanI2CTwoWire.cpp add TCA8418KB * Create TCA8418Keyboard.cpp Create TCA8418Keyboard.cpp * Create TCA8418Keyboard.h Create TCA8418Keyboard.h * add TCA8418 to kbI2cBase.cpp add TCA8418 * add TCA8418 to kbI2cBase.h add TCA8418 * add TCA8418KB to main.cpp add TCA8418KB * add TCA8418KB to cardKbI2cImpl.cpp add TCA8418KB * Update TCA8418 kbI2cBase.cpp * enable debug TCA8418 * Nokia 5130 config * Update TCA8418Keyboard.h old version in initial commit * Update ScanI2CTwoWire.cpp * add tap_interval and backlight_on to constructor * Create TCA8418-layouts.cpp TCA8418-layout 3x4 should work Nokia 5130 needs editing. * put layouts in different file + adjusted code for variable matrix sizes * rename TCA8418-layouts.cpp to TCA8418Layouts.cpp + add endif * Update TCA8418Keyboard.cpp name change layouts * forgot a \ * Create TCA8418Layouts.h * Update TCA8418Keyboard.cpp * add include forgot include * Update TCA8418Keyboard.cpp * Update TCA8418Keyboard.h * Update TCA8418Layouts.h * revert to keyboard layout in main TCA8418Keyboard.cpp * fixed the address * changed ordering of constructor * reflect changes #6371 * edit config.h * bug fix fast pressing multiple buttons + clean up scanI2CTwoWire.cpp * trunked --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net>	2025-03-26 13:29:18 +11:00
Austin	33f2b7144f	Default to UDP enabled if it's available (#6394)	2025-03-25 11:39:19 -05:00
Austin	0ddb507055	userPrefs: Add WiFi SSID/PW, and UDP multicast configs (#6387)	2025-03-24 19:38:47 -05:00
Jorropo	3afe84c4f4	linux-native: allow multiple processes to all bind to the same multicast 2tuple (#6391) ... * cleanup UdpMulticastThread.h preprocessor rules a tiny bit * bump platform-native to allow for multiple multicast listeners on the same machine --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-24 19:30:47 -05:00
Manuel	e9d8a3d7f9	MUI: increase stack, cache and drawbuffer (#6389) ... * increase stack, cache and drawbuffer * bump device-ui lib * T-Deck map: switch to full redraw	2025-03-24 19:30:17 -05:00
Chloe Bethel	e722a97987	Don't use assert() in MeshService to guard queueing packets (#6388)	2025-03-24 23:26:59 +01:00
Andrew Yong	daa4186d65	[esp32] Define BUTTON_PIN (-1) by default, fixes #6213 (#6371) ... Signed-off-by: Andrew Yong <me@ndoo.sg>	2025-03-23 16:32:55 +01:00
dfsx1	cf7f0f9d08	Fix NodeInfo exploit overwriting publicKey in NodeDB (#6372) ... Co-authored-by: dfsx1 <dfsx1@users.noreply.github.com>	2025-03-23 05:49:06 -05:00
Tom Fifield	1e4a0134e6	Remove unnecessary null pointer check (#6370) ... Further pointed out by @elfring, this patch removes one more unnecessary null pointer check. https://github.com/meshtastic/firmware/issues/6170#issuecomment-2744002798	2025-03-21 19:55:11 -05:00
Thomas Göttgens	0951fdd49b	Add support for Heltec HRI-3621 industrial sensor hub (#6366)	2025-03-21 16:12:49 +01:00
Thomas Göttgens	848a3ed6a1	implement littlefs for stm32 (#5987) ... Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Daniel Peter Chokola <dan.chokola@gmail.com> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com>	2025-03-21 16:12:27 +01:00
github-actions[bot]	fd7a1f2ccb	[create-pull-request] automated change (#6365)	2025-03-21 14:28:23 +01:00
Tom Fifield	5acaf8f897	Enable range test on Linux Native (#6356) ... The Range Test Module was defined-out by architecture. No reason it shouldn't work, so add PORTDUINO to the list of architectures that compile this module. Tested on Ubuntu. Enables without crashing, will send packets on the set time. However, for now the CSV file download does not appear to work. Partially fixes https://github.com/meshtastic/firmware/issues/5618	2025-03-21 05:59:20 -05:00
Tom Fifield	cff93adb5e	[WIP] LS20031 setup support (#5737) ... LS20031 is a MTK3339-based chip. Therefore, it should share some heritage with other MTK3333 or MTK3339 chips. Re-use the L76B commands for setup.	2025-03-21 05:58:52 -05:00
Tom Fifield	ae27aaaf43	Remove unnecessary null pointer checks (#6358) ... As reported by @elfring, we had several points in our code where it was unnecessary to check pointers were non-null before deleting them. Fixes https://github.com/meshtastic/firmware/issues/6170	2025-03-21 05:54:42 -05:00
Mike	31c0e8fa2c	Support WiFi OTA (#6352) ... * Support WiFi OTA * Fix trunk warnings * Make getVersion() check for project name too --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-20 13:39:33 -05:00
raulperdomo	0d95b1afcc	Added bounds checking to memcpy and use memory-safe strlcpy (#6351) ... * Added bounds checking to memcpy and use memory-safe strlcpy for reading serial data in processWXSerial() function. * Fixed linting with trunk	2025-03-20 10:40:13 -05:00
Austin	46235f6f8b	RP2xx0: Add UDP Multicast support (#6327)	2025-03-20 08:49:28 -05:00
Jorropo	d1068fd1e4	Add UDP multicast support on linux. (#6342) ... * Add UDP multicast support on linux. Closes #6326 We tested it an it works. This is really hacky to say the least. * Add libuv to Linux packaging * Trunkadunk * Correct ref * Add libuv1-dev to setup-native --------- Co-authored-by: vidplace7 <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-20 08:47:39 -05:00
Jorropo	f41afb14b1	raise the multicast UDP TTL limit (#6343) ... Since 96ba94843b we don't spray packets to all machines on the network. So we can allow ourself to raise the TTL limit, this allows users who run L3 IGMP Routing infrastructure to pass meshtastic frames over UDP. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-20 05:41:29 -05:00
Austin	6673cb9292	Increase MAX_NUM_NODES on high-flash ESP32_S3 (#6311)	2025-03-18 20:19:51 -05:00
Ben Meadors	9cc13e628a	Stubbed out backup / restore methods for now and fixed bug	2025-03-17 19:24:47 -05:00
Jorropo	af8b64e84e	pass pointer to UDP multicast packet to protobuf decoder (#6333) ... The packet.readBytes API is not available on all targets: - RP2040 & RP2340 - yet to be written portduino API Instead pass the data buffer as-is. It also removes a memcpy which do not need to exists. I've tested it successfully on a tbeam. Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-03-16 19:36:33 -05:00
Jorropo	96ba94843b	Send UDP packets to multicast address rather than broadcast address (#6331) ... A smart router or switch is able to snoop the multicast address to only send the packets to nodes listening on the multicast address. Before all machines reachable on the L2 layer would receive the packet.	2025-03-16 19:36:02 -05:00