55 Commits

Author	SHA1	Message	Date
Smol Fish	ed91ab4dad	Merge 858161c1ed into 799cf0e8b3	2025-10-24 22:06:28 +08:00
Jonathan Bennett	464663b496	GPS_POWER_TOGGLE no longer has a function, so purge (#8312)	2025-10-12 05:33:34 -05:00
Ben Meadors	775595cb37	Merge pull request #8160 from Quency-D/dev-heltec-tracker-v2 ... add heltec tracker v2 board.	2025-10-03 08:21:15 -05:00
Ben Meadors	e954591ca5	Merge branch 'develop' into fix/tlora-pager-rotary-amplifier	2025-10-02 14:40:37 -05:00
Ben Meadors	878ac3ec84	Update variants/esp32s3/heltec_wireless_tracker_v2/variant.h ... Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-10-02 06:09:52 -05:00
Quency-D	500e7920ae	delete SX126X_MAX_POWER=11	2025-09-30 14:06:46 +08:00
Tom Fifield	0f6131d2c8	Use common power amp definition for Heltec v4 and Heltec Tracker v2	2025-09-30 08:30:18 +10:00
Quency-D	8d323a1cf1	add heltec tracker v2 board.	2025-09-30 08:20:48 +10:00
Tom Fifield	a3e6f16378	Introduce non-linear TX_GAIN_LORA (#8107) ... * Introduce non-linear TX_GAIN_LORA Previously, our TX_GAIN_LORA setting was a single number, intended to represent the signal gain going through a power amp (plus or minus antenna, attenuator, and other parts of the RF chain). It turns out the relationship between the input power (i.e. from an SX1262) and total output power is often non-linear. While we fudged a 1dBm difference here and there with existing chips, the Heltec v4 has a 5dBm difference in gain depending on which end of the input power (and frequency) you are at. To allow people to run their Heltec v4 at max power when legal, and future proof our code, this patch introduced an optional array-based TX_GAIN_LORA. Define NUM_PA_POINTS and set TX_GAIN_LORA to gain values for a given input power in 1dBm increments, and all will work. For linear systems, just continue to define TX_GAIN_LORA as a number. Fixes https://github.com/meshtastic/firmware/issues/8070 * Remove temporary power limit on heltec v4 * Add function RadioLibInterface::checkOutputPower * Ensure SX126x reaches minimum supported power. * Keep it simple, instead.	2025-09-30 08:20:39 +10:00
Smol Fish	4389391bff	Merge branch 'develop' into develop	2025-09-25 08:38:01 +08:00
Ben Meadors	8e04f9f631	Merge branch 'master' into develop	2025-09-24 06:03:14 -05:00
Ben Meadors	8e608e8186	Heltec V4 is 16mb	2025-09-23 06:04:47 -05:00
MATBckh22	30943653c5	Merge branch 'develop' of https://github.com/meshtastic/firmware into develop	2025-09-23 08:06:10 +08:00
MATBckh22	b602bca6f2	Roll Pitch Yaw	2025-09-22 11:06:19 +08:00
WillyJL	da4bc0f97c	Merge remote-tracking branch 'upstream/develop' into fix/tlora-pager-rotary-amplifier	2025-09-21 21:12:06 +02:00
Quency-D	cea9e1238b	Add heltec_v4 board. (#7845) ... * add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-09-21 07:13:28 -05:00
Quency-D	11eb4a5b90	Add heltec_v4 board. (#7845) ... * add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>	2025-09-21 07:03:44 -05:00
MATBckh22	8b87e4c3ac	Added working accelerometer and gyroscope for QMI8658	2025-09-20 22:59:30 +08:00
WillyJL	bfb03b422a	Merge remote-tracking branch 'upstream/develop' into fix/tlora-pager-rotary-amplifier	2025-09-20 02:36:57 +02:00
Michael	2bafac242e	Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753) ... * Added compatibility between nodes on different Presets through `Mesh via UDP` * Optimize multicast handling and channel mapping - FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression. - Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets to the local default channel via isDefaultChannel() - UdpMulticastHandler: set transport_mechanism only after successful decode * trunk fmt * Move setting transport mechanism. --------- Co-authored-by: GUVWAF <thijs@havinga.eu>	2025-09-18 20:37:05 -05:00
Ben Meadors	b13d023d58	Merge branch 'master' into develop	2025-09-18 19:50:16 -05:00
WillyJL	9345bdcb22	T-Lora Pager: Support LR1121 and SX1280 models (#7956) ... * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs	2025-09-18 19:49:28 -05:00
Michael	b9d53d667e	Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753) ... * Added compatibility between nodes on different Presets through `Mesh via UDP` * Optimize multicast handling and channel mapping - FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression. - Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets to the local default channel via isDefaultChannel() - UdpMulticastHandler: set transport_mechanism only after successful decode * trunk fmt * Move setting transport mechanism. --------- Co-authored-by: GUVWAF <thijs@havinga.eu>	2025-09-15 19:29:47 -05:00
WillyJL	3d86c99c25	T-Lora Pager: Interrupt based rotary encoder	2025-09-14 18:48:58 +02:00
Ben Meadors	09de0e3edb	Merge branch 'master' into develop	2025-09-14 08:15:25 -05:00
Ben Meadors	9211b1bb4b	Static memory pool allocation (#7966) ... * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev>	2025-09-13 07:01:07 -05:00
Ben Meadors	51acd92a37	Trunk	2025-09-13 06:51:18 -05:00
WillyJL	6d2093650a	T-Lora Pager: Support LR1121 and SX1280 models (#7956) ... * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs	2025-09-13 06:50:53 -05:00
WillyJL	566c2c3fdf	T-Lora Pager: Support LR1121 and SX1280 models (#7956) ... * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs	2025-09-13 06:50:02 -05:00
Tom Fifield	abc0eb196a	Fix build error in rak_wismesh_tap_v2 (#7905) ... In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices.	2025-09-10 16:28:49 -05:00
Ben Meadors	569a911455	Merge pull request #7915 from meshtastic/master ... Master backmerge	2025-09-08 05:58:00 -05:00
Manuel	39ff880506	reorganize 8MB partition for MUI devices (#7860) ... * reorganize 8MB partition for MUI devices * update device-install scripts to MUI 8MB partition scheme	2025-09-08 05:56:47 -05:00
Tom Fifield	c5b95f5a4b	Disable web server on Picomputer (#7907) ... Meshtastic no longer fits on the flash of the Picomputer. Since this is a handheld, portable device, it's unlikely that people are connecting to it via the webserver. So, disable the webserver and it fits again: ``` Checking size .pio/build/picomputer-s3-tft/firmware.elf Advanced Memory Usage is available via "PlatformIO Home > Project Inspect" RAM: [=== ] 32.4% (used 106056 bytes from 327680 bytes) Flash: [==========] 99.1% (used 3313913 bytes from 3342336 bytes) ``` Fixes: https://github.com/meshtastic/firmware/issues/7906	2025-09-08 05:56:19 -05:00
Tom Fifield	15f4aebcd5	Fix build error in rak_wismesh_tap_v2 (#7905) ... In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices.	2025-09-08 05:54:08 -05:00
Tom Fifield	227d0fa7dc	Merge pull request #7862 from meshtastic/master ... Backmerge from Master into develop	2025-09-08 11:23:22 +10:00
GUVWAF	a25bfd264c	Only stop retransmissions when receiving implicit ACK over LoRa (#7872) ... * Only stop retransmissions when receiving implicit ACK over LoRa * trunk fmt	2025-09-05 12:00:23 -05:00
GUVWAF	4d6fe936ae	Only stop retransmissions when receiving implicit ACK over LoRa (#7872) ... * Only stop retransmissions when receiving implicit ACK over LoRa * trunk fmt	2025-09-05 11:01:25 -05:00
Manuel	ec9f3fa6ea	T-Lora Pager: fix keyboard and improve rotary wheel haptic (#7869) ... * update RotaryEncoder: use interrupts * increase rotary encoder processing interval * remove disabling peripherals during LS	2025-09-05 07:42:51 -05:00
Daniel.Cao	e4c7fca716	Add RAK WisMesh Tap V2 (ESP32S3) Hardware Variant (#7741) ... * Add initial variant and platformio configuration for RAK WISMESHTAP V2 * Add initial variant and platformio configuration for rak wismesh tap v2 * Remove unnecessary Meshtastic build flags from rak_wismesh_tap_v2 configuration * Enable LGFX button support in rak_wismesh_tap_v2 configuration * Revert "Enable LGFX button support in rak_wismesh_tap_v2 configuration" This reverts commit 2bd2c1a03b. --------- Co-authored-by: Daniel.Cao <daniel.cao@rakwireless.com>	2025-09-04 06:38:31 -05:00
Daniel.Cao	5850a7cd6b	Add RAK WisMesh Tap V2 (ESP32S3) Hardware Variant (#7741) ... * Add initial variant and platformio configuration for RAK WISMESHTAP V2 * Add initial variant and platformio configuration for rak wismesh tap v2 * Remove unnecessary Meshtastic build flags from rak_wismesh_tap_v2 configuration * Enable LGFX button support in rak_wismesh_tap_v2 configuration * Revert "Enable LGFX button support in rak_wismesh_tap_v2 configuration" This reverts commit 2bd2c1a03b. --------- Co-authored-by: Daniel.Cao <daniel.cao@rakwireless.com>	2025-09-03 06:20:19 -05:00
Ben Meadors	8685436cbb	Merge pull request #7773 from meshtastic/master ... Backmerge	2025-08-27 20:53:55 -05:00
Ben Meadors	25a19b49ad	This one is not working yet	2025-08-27 15:18:26 -05:00
Ben Meadors	a4d96bebfb	Drop for now	2025-08-27 14:35:29 -05:00
Ben Meadors	26c38ffc8e	Remove debug logging	2025-08-27 11:55:27 -05:00
Manuel	596cd7e0b6	enable device telemetry (#7757)	2025-08-26 13:39:43 -05:00
Manuel	3f5c30e3b3	T-Lora Pager (#7613) ... * initial commit * preset rotary1 encoder * define TAB+ESC * haptic feedback * allow switch off haptic feedback * enable audio amplifier * include PR4684 * fix for tft target * add ES8311 audio codec * fix KB scan duplicate * display workaround to avoid debris * fix debris on display * keyboard backlight * enable screen options * fsm based bounce-free rotary encoder implementation * use fsm RotaryEncoder only for T-Lora Pager * change inputbroker default config to allow using rotary wheel for screens AND menues --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-26 09:35:25 -05:00
m1nl	5aa486d6c2	set HAS_32768HZ for Heltec V3 board	2025-08-25 19:56:15 +02:00
m1nl	ba26d03b1b	standarize values of HAS_32768HZ capability flag	2025-08-25 19:44:13 +02:00
Lewis He	5136c8ba24	The T-Deck-Pro 4G version sets the modem to be disabled by default. (#7715) ... Co-authored-by: Ben Meadors <benmmeadors@gmail.com>	2025-08-23 06:46:59 -05:00
Jonathan Bennett	4a241deb96	Thinknode button and backlight fixes (#7641) ... * Thinknode button and backlight fixes * Save backlight value between reboots	2025-08-15 14:41:21 -05:00