* Fix Heltec Tracker Screen issues
Fix Heltec Tracker Screen issues like wrong offsets, display size and screen not shutting down.
Divides board into two different envs for 1.0 and 1.1 version PCB
* Helteck wireless tracker default version V1_1
* rename heltec tracker 1.1 - trunk fmt
rename varian of heltec tracker 1.1 to "heltec tracker" to be retro-compatible.
Trunk formatting.
* Heltec Tracker increase Screen update to 3Hz
Heltec Tracker increase Screen update to 3Hz from 1Hz
* Pico W: Initial WiFi support: connects, but freezes after a while
* Update arduino-pico core to fix hang with Wi-Fi
* Add `picow` to workflow since it's different from `pico` now
* Refactor GPS to not probe if pins not defined
* Use Named Constructor to clean up code
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
* Cleanup and remove dead code
* Rename GPS_PIN_WAKE to GPS_PIN_STANDBY
* Actually put GPS to sleep between fixes
* add GPS_POWER_TOGGLE for heltec-tracker and t-deck
* Change GPS_THREAD_INTERVAL to 200 ms
* More dead code, compiler warnings, and add returns
* Add Number of sats to log output
* Add pgs enable and triple-click config
* Track average GPS fix time to judge low-power time
* Feed PositionModule on GPS fix
* Don't turn off the 3v3_s line on RAK4631
when the rotary is present.
* Add GPS power standbyOnly option
* Delay setting time currentQuality
to avoid strange log message.
* Typos, comments, and remove unused variable
* Short-circuit the setAwake logic on GPS disable
* heltec-tracker 0.3 GPS power saving
* set en_gpio to defined state
* Fix fixed_position logic with GPS disabled
* Don't process GPS serial when not isAwake
* Add quirk for Heltec Tracker GPS powersave
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
* Use UINT32_MAX to indicate no configured GPS
* Refactor GPS to not probe if pins not defined
* Minor cleanups related to rework
* Use Named Constructor to clean up code
* Actually disable the GPS thread
* Don't actually disable the GPS thread
* Move doGPSPowerSave to GPS class
* Make sure to set GPS awake on triple-click
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* First attempt at lazy config of GPS
* More GPS rework
Break GPS init into smaller, interruptable steps
Move more GPS commands into ubx.h
Combine Setup functions
* Move the rest of UBX messages to ubs.h
* T-Watch WIP
* Updates
* Temp
* Update screen spi bus and and backlight en
* Peripherals progress
* Fixes
* Fixes
* Updates
* DRV scaffolding
* Fixed touch-screen driver selection. WIP on DRV haptic feedback
* DRV2605 pmu channel
* Trunk
* Fixes and defaults
* Dropped an s
* Move PMU and turn off screen that way
* Add t-deck and t-watch-s3 to CI and cleanup
* More cleanup
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
* Fix LOG_DEBUG messages when no DEBUG_PORT.
- fix wrong debug print
- change shutdown logic for t-beam if PMU is detected
- wait for 10 seconds instead of 5 for shutdown and resurrect screen brightness adjust for @karamo
* Rearranging deck chairs, 900M22S working, 30S not
* We do have wire, just not where it's expected
* Put more of the module specific pins in their blocks
* tryfix compile with NO_SCREEN
* Portduino only: don't continue to try rebooting (#1887)
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
* Support for TLORA 2.1-1.8
* Don't allow arbitrary channel name for admin (#1886)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Experimental DIY nrf52840 feather support (#1884)
* Experimental DIY nrf52840 feather support
* Fix target
* sx1262 wiring
* Remove lib
* Don't consider Response as ACK for FloodingRouter (#1885)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix feather diy (#1892)
* Fix variant
* Fix feather diy target
* [modules][external notifications] allow select channel to listen to
* Fix feather diy pin mapping (#1894)
Thanks to @markbirss
* [create-pull-request] automated change
* Override Screen Autodtect
* Maybe fix crash of this board.
* Fixes reset loop with new espressif32 platform on tlora-v2
Sending a pulse to the OLED_RESET Pin 16 results in a reset loop using recent version of the espressif32 platform.
* Experiment with self hosted action runner
* Fix MQTT on ETH
* revert the tryfix
* Cheating
* Cleanup artifacts older than 1 month
* Update cleanup_artifacts.yml
* Update cleanup_artifacts.yml
* Update cleanup_artifacts.yml
* Delete cleanup_artifacts.yml
* fix: use RF95_IRQ for wakeup source in doLightSleep (#1899)
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update protos
* Update protos
Co-authored-by: code8buster <communismisgreat@national.shitposting.agency>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
Co-authored-by: Mykhailo Lesyk <m@lesyk.org>
Co-authored-by: Mykhailo Lesyk <lesykm@users.noreply.github.com>
Co-authored-by: caveman99 <caveman99@users.noreply.github.com>
Co-authored-by: he-leon <he-leon@users.noreply.github.com>
Co-authored-by: Lars Weber <weber@weber-software.com>
