[create-pull-request] automated change

* add nugget and nibble boards for 38c3

* mark those boards extra for now

Dockerfile

@@ -14,7 +14,7 @@ USER root
 # trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
 RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \
                            ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \
-                           libulfius-dev liborcania-dev libssl-dev pkg-config && \
+                           libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \
     apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware
 
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware
@@ -37,7 +37,7 @@ ENV TZ=Etc/UTC
 
 # trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
 # trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain
-RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \
+RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \
     apt-get clean && rm -rf /var/lib/apt/lists/*
 
 RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh
@@ -51,4 +51,4 @@ VOLUME /home/mesh/data
 
 CMD [ "sh",  "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ]
 
-HEALTHCHECK NONE
+HEALTHCHECK NONE

arch/portduino/portduino.ini

@@ -34,7 +34,9 @@ build_flags =
   -Isrc/platform/portduino
   -DRADIOLIB_EEPROM_UNSUPPORTED
   -DPORTDUINO_LINUX_HARDWARE
+  -lpthread
   -lstdc++fs
   -lbluetooth
   -lgpiod
-  -lyaml-cpp
+  -lyaml-cpp
+  -std=c++17

boards/esp32-s3-zero.json

@@ -0,0 +1,41 @@
+{
+  "build": {
+    "arduino": {
+      "partitions": "default.csv",
+      "memory_type": "qio_qspi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DBOARD_HAS_PSRAM"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "psram_type": "qio",
+    "hwids": [["0x303A", "0x1001"]],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": ["wifi", "bluetooth"],
+  "debug": {
+    "default_tool": "esp-builtin",
+    "onboard_tools": ["esp-builtin"],
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "platforms": ["espressif32"],
+  "name": "Espressif ESP32-S3-FH4R2 (4 MB QD, 2MB PSRAM)",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html",
+  "vendor": "Espressif"
+}

src/mqtt/MQTT.cpp

@@ -231,6 +231,23 @@ bool isPrivateIpAddress(const IPAddress &ip)
     }
     return false;
 }
+
+// Separate a <host>[:<port>] string. Returns a pair containing the parsed host and port. If the port is
+// not present in the input string, or is invalid, the value of the `port` argument will be returned.
+std::pair<String, uint16_t> parseHostAndPort(String server, uint16_t port = 0)
+{
+    const int delimIndex = server.indexOf(':');
+    if (delimIndex > 0) {
+        const long parsedPort = server.substring(delimIndex + 1, server.length()).toInt();
+        if (parsedPort < 1 || parsedPort > UINT16_MAX) {
+            LOG_WARN("Invalid MQTT port %d: %s", parsedPort, server.c_str());
+        } else {
+            port = parsedPort;
+        }
+        server[delimIndex] = 0;
+    }
+    return std::make_pair(std::move(server), port);
+}
 } // namespace
 
 void MQTT::mqttCallback(char *topic, byte *payload, unsigned int length)
@@ -308,7 +325,8 @@ MQTT::MQTT() : concurrency::OSThread("mqtt"), mqttQueue(MAX_MQTT_QUEUE)
         }
 
         IPAddress ip;
-        isMqttServerAddressPrivate = ip.fromString(moduleConfig.mqtt.address) && isPrivateIpAddress(ip);
+        isMqttServerAddressPrivate =
+            ip.fromString(parseHostAndPort(moduleConfig.mqtt.address).first.c_str()) && isPrivateIpAddress(ip);
 
 #if HAS_NETWORKING
         if (!moduleConfig.mqtt.proxy_to_client_enabled)
@@ -424,14 +442,9 @@ void MQTT::reconnect()
         pubSub.setClient(mqttClient);
 #endif
 
-        String server = String(serverAddr);
+        std::pair<String, uint16_t> hostAndPort = parseHostAndPort(serverAddr, serverPort);
-        int delimIndex = server.indexOf(':');
+        serverAddr = hostAndPort.first.c_str();
-        if (delimIndex > 0) {
+        serverPort = hostAndPort.second;
-            String port = server.substring(delimIndex + 1, server.length());
-            server[delimIndex] = 0;
-            serverPort = port.toInt();
-            serverAddr = server.c_str();
-        }
         pubSub.setServer(serverAddr, serverPort);
         pubSub.setBufferSize(512);
 

src/platform/rp2xx0/architecture.h

@@ -33,4 +33,6 @@
 #define HW_VENDOR meshtastic_HardwareModel_RP2040_LORA
 #elif defined(RP2040_FEATHER_RFM95)
 #define HW_VENDOR meshtastic_HardwareModel_RP2040_FEATHER_RFM95
+#elif defined(PRIVATE_HW)
+#define HW_VENDOR meshtastic_HardwareModel_PRIVATE_HW
 #endif

variants/nibble_esp32/platformio.ini

@@ -0,0 +1,6 @@
+[env:nibble-esp32]
+extends = esp32s3_base
+board = esp32-s3-zero
+board_level = extra
+build_flags = 
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/nibble_esp32

variants/nibble_esp32/variant.h

@@ -0,0 +1,18 @@
+#define I2C_SDA 11 // I2C pins for this board
+#define I2C_SCL 10
+
+#define LED_PIN 1 // If defined we will blink this LED
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 7
+#define LORA_MOSI 8
+#define LORA_CS 9
+#define LORA_DIO0 5 // a No connect on the SX1262 module
+#define LORA_RESET 4
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC

variants/nibble_rp2040/platformio.ini

@@ -0,0 +1,17 @@
+[env:nibble-rp2040]
+extends = rp2040_base
+board = rpipico
+board_level = extra
+upload_protocol = picotool
+
+# add our variants files to the include and src paths
+build_flags = ${rp2040_base.build_flags} 
+  -DPRIVATE_HW
+  -Ivariants/nibble_rp2040
+  -DDEBUG_RP2040_PORT=Serial
+  -DHW_SPI1_DEVICE
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
+lib_deps =
+  ${rp2040_base.lib_deps}
+debug_build_flags = ${rp2040_base.build_flags}, -g
+debug_tool = cmsis-dap ; for e.g. Picotool

variants/nibble_rp2040/variant.h

@@ -0,0 +1,18 @@
+#define ARDUINO_ARCH_AVR
+
+#define BUTTON_PIN -1 // Pin 17 used for antenna switching via DIO4
+
+#define LED_PIN 1
+
+#define HAS_CPU_SHUTDOWN 1
+
+#define USE_RFM95
+#define LORA_SCK 10
+#define LORA_MISO 12
+#define LORA_MOSI 11
+#define LORA_CS 13
+
+#define LORA_DIO0 14
+#define LORA_RESET 15
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC

variants/nugget_s2_lora/platformio.ini

@@ -0,0 +1,6 @@
+[env:nugget-s2-lora]
+extends = esp32s2_base
+board = lolin_s2_mini
+board_level = extra
+build_flags = 
+  ${esp32s2_base.build_flags} -D PRIVATE_HW -I variants/nugget_s2_lora

variants/nugget_s2_lora/variant.h

@@ -0,0 +1,23 @@
+#define I2C_SDA 34 // I2C pins for this board
+#define I2C_SCL 36
+
+#define LED_PIN 15 // If defined we will blink this LED
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 3                     // How many neopixels are connected
+#define NEOPIXEL_DATA 12                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 8
+#define LORA_MOSI 10
+#define LORA_CS 13
+#define LORA_DIO0 16
+#define LORA_RESET 5
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC

variants/nugget_s3_lora/platformio.ini

@@ -0,0 +1,6 @@
+[env:nugget-s3-lora]
+extends = esp32s3_base
+board = lolin_s3_mini
+board_level = extra
+build_flags = 
+  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/nugget_s3_lora

variants/nugget_s3_lora/variant.h

@@ -0,0 +1,23 @@
+#define I2C_SDA 34 // I2C pins for this board
+#define I2C_SCL 38
+
+#define LED_PIN 15 // If defined we will blink this LED
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 3                     // How many neopixels are connected
+#define NEOPIXEL_DATA 10                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 7
+#define LORA_MOSI 8
+#define LORA_CS 9
+#define LORA_DIO0 16 // a No connect on the SX1262 module
+#define LORA_RESET 4
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC

variants/portduino-buildroot/platformio.ini

@@ -3,7 +3,6 @@ extends = portduino_base
 ; Optional libraries should be appended to `PLATFORMIO_BUILD_FLAGS`
 ; environment variable in the buildroot environment.
 build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino-buildroot
-  -std=c++17
 board = buildroot
 lib_deps = ${portduino_base.lib_deps}
-build_src_filter = ${portduino_base.build_src_filter}
+build_src_filter = ${portduino_base.build_src_filter}

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 5
-build = 17
+build = 18