Merge 03dc730f03 into 0952007805

* Show ExternalNotification as excluded if it is

* Enable ExternalNotification, SerialModule and RangeTest on STM32WL

* Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin

* Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1)

* Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.

boards/wiscore_rak3172.json

@@ -5,7 +5,7 @@
     },
     "core": "stm32",
     "cpu": "cortex-m4",
-    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_GENERIC_WLE5CCUX",
+    "extra_flags": "-DSTM32WLxx -DSTM32WLE5xx -DARDUINO_RAK3172_MODULE",
     "f_cpu": "48000000L",
     "mcu": "stm32wle5ccu",
     "variant": "STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U",

src/DisplayFormatters.cpp

@@ -1,7 +1,14 @@
 #include "DisplayFormatters.h"
 
-const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName)
+const char *DisplayFormatters::getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
+                                                         bool usePreset)
 {
+
+    // If use_preset is false, always return "Custom"
+    if (!usePreset) {
+        return "Custom";
+    }
+
     switch (preset) {
     case meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO:
         return useShortName ? "ShortT" : "ShortTurbo";

src/DisplayFormatters.h

@@ -4,5 +4,6 @@
 class DisplayFormatters
 {
   public:
-    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName);
+    static const char *getModemPresetDisplayName(meshtastic_Config_LoRaConfig_ModemPreset preset, bool useShortName,
+                                                 bool usePreset);
 };

src/gps/GPS.cpp

@@ -843,9 +843,6 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         setPowerPMU(true);                                        // Power (PMU): on
         writePinStandby(false);                                   // Standby (pin): awake (not standby)
         setPowerUBLOX(true);                                      // Standby (UBLOX): awake
-#ifdef GNSS_AIROHA
-        lastFixStartMsec = 0;
-#endif
         break;
 
     case GPS_SOFTSLEEP:
@@ -863,9 +860,7 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep (not awake)
         setPowerUBLOX(false, sleepTime);                            // Standby (UBLOX): asleep, timed
 #ifdef GNSS_AIROHA
-        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+        digitalWrite(PIN_GPS_EN, LOW);
-            digitalWrite(PIN_GPS_EN, LOW);
-        }
 #endif
         break;
 
@@ -877,9 +872,7 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime)
         writePinStandby(true);                                      // Standby (pin): asleep
         setPowerUBLOX(false, 0);                                    // Standby (UBLOX): asleep, indefinitely
 #ifdef GNSS_AIROHA
-        if (config.position.gps_update_interval * 1000 >= GPS_FIX_HOLD_TIME * 2) {
+        digitalWrite(PIN_GPS_EN, LOW);
-            digitalWrite(PIN_GPS_EN, LOW);
-        }
 #endif
         break;
     }
@@ -1062,6 +1055,8 @@ void GPS::down()
         }
         // If update interval long enough (or softsleep unsupported): hardsleep instead
         setPowerState(GPS_HARDSLEEP, sleepTime);
+        // Reset the fix quality to 0, since we're off.
+        fixQual = 0;
     }
 }
 
@@ -1121,11 +1116,19 @@ int32_t GPS::runOnce()
         shouldPublish = true;
     }
 
+    uint8_t prev_fixQual = fixQual;
     bool gotLoc = lookForLocation();
     if (gotLoc && !hasValidLocation) { // declare that we have location ASAP
         LOG_DEBUG("hasValidLocation RISING EDGE");
         hasValidLocation = true;
         shouldPublish = true;
+        // Hold for 20secs after getting a lock to download ephemeris etc
+        fixHoldEnds = millis() + 20000;
+    }
+
+    if (gotLoc && prev_fixQual == 0) { // just got a lock after turning back on.
+        fixHoldEnds = millis() + 20000;
+        shouldPublish = true; // Publish immediately, since next publish is at end of hold
     }
 
     bool tooLong = scheduling.searchedTooLong();
@@ -1134,8 +1137,7 @@ int32_t GPS::runOnce()
 
     // Once we get a location we no longer desperately want an update
     if ((gotLoc && gotTime) || tooLong) {
-
+        if (tooLong && !gotLoc) {
-        if (tooLong) {
             // we didn't get a location during this ack window, therefore declare loss of lock
             if (hasValidLocation) {
                 LOG_DEBUG("hasValidLocation FALLING EDGE");
@@ -1143,9 +1145,15 @@ int32_t GPS::runOnce()
             p = meshtastic_Position_init_default;
             hasValidLocation = false;
         }
-
+        if (millis() > fixHoldEnds) {
-        down();
+            shouldPublish = true; // publish our update at the end of the lock hold
-        shouldPublish = true; // publish our update for this just finished acquisition window
+            publishUpdate();
+            down();
+#ifdef GPS_DEBUG
+        } else {
+            LOG_DEBUG("Holding for GPS data download: %d ms (numSats=%d)", fixHoldEnds - millis(), p.sats_in_view);
+#endif
+        }
     }
 
     // If state has changed do a publish
@@ -1508,24 +1516,6 @@ static int32_t toDegInt(RawDegrees d)
  */
 bool GPS::lookForTime()
 {
-
-#ifdef GNSS_AIROHA
-    uint8_t fix = reader.fixQuality();
-    if (fix >= 1 && fix <= 5) {
-        if (lastFixStartMsec > 0) {
-            if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
-                return false;
-            } else {
-                clearBuffer();
-            }
-        } else {
-            lastFixStartMsec = millis();
-            return false;
-        }
-    } else {
-        return false;
-    }
-#endif
     auto ti = reader.time;
     auto d = reader.date;
     if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed
@@ -1564,25 +1554,6 @@ The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of s
  */
 bool GPS::lookForLocation()
 {
-#ifdef GNSS_AIROHA
-    if ((config.position.gps_update_interval * 1000) >= (GPS_FIX_HOLD_TIME * 2)) {
-        uint8_t fix = reader.fixQuality();
-        if (fix >= 1 && fix <= 5) {
-            if (lastFixStartMsec > 0) {
-                if (Throttle::isWithinTimespanMs(lastFixStartMsec, GPS_FIX_HOLD_TIME)) {
-                    return false;
-                } else {
-                    clearBuffer();
-                }
-            } else {
-                lastFixStartMsec = millis();
-                return false;
-            }
-        } else {
-            return false;
-        }
-    }
-#endif
     // By default, TinyGPS++ does not parse GPGSA lines, which give us
     //   the 2D/3D fixType (see NMEAGPS.h)
     // At a minimum, use the fixQuality indicator in GPGGA (FIXME?)

src/gps/GPS.h

@@ -159,7 +159,7 @@ class GPS : private concurrency::OSThread
     uint8_t fixType = 0;      // fix type from GPGSA
 #endif
 
-    uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0;
+    uint32_t fixHoldEnds = 0;
     uint32_t rx_gpio = 0;
     uint32_t tx_gpio = 0;
 

src/gps/RTC.cpp

@@ -132,6 +132,10 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
     if (tv->tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
+    } else if (tv->tv_sec > (BUILD_EPOCH + FORTY_YEARS)) {
+        LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch, BUILD_EPOCH,
+                 BUILD_EPOCH + FORTY_YEARS);
+        return RTCSetResultInvalidTime;
     }
 #endif
 
@@ -250,6 +254,10 @@ RTCSetResult perhapsSetRTC(RTCQuality q, struct tm &t)
     if (tv.tv_sec < BUILD_EPOCH) {
         LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH);
         return RTCSetResultInvalidTime;
+    } else if (tv.tv_sec > (BUILD_EPOCH + FORTY_YEARS)) {
+        LOG_WARN("Ignore time (%ld) too far in the future (build epoch: %ld, max allowed: %ld)!", printableEpoch, BUILD_EPOCH,
+                 BUILD_EPOCH + FORTY_YEARS);
+        return RTCSetResultInvalidTime;
     }
 #endif
 

src/gps/RTC.h

@@ -55,3 +55,6 @@ time_t gm_mktime(struct tm *tm);
 #define SEC_PER_DAY 86400
 #define SEC_PER_HOUR 3600
 #define SEC_PER_MIN 60
+#ifdef BUILD_EPOCH
+#define FORTY_YEARS (40UL * 365 * SEC_PER_DAY) // probably time to update your firmware
+#endif

src/graphics/draw/DebugRenderer.cpp

@@ -263,12 +263,6 @@ void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t
             display->drawString(x + 1, y, "USB");
     }
 
-    //    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
-
-    //    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
-    //    if (config.display.heading_bold)
-    //        display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
-
     uint32_t currentMillis = millis();
     uint32_t seconds = currentMillis / 1000;
     uint32_t minutes = seconds / 60;
@@ -398,7 +392,7 @@ void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x,
     display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
 
     // === Second Row: Radio Preset ===
-    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
     char regionradiopreset[25];
     const char *region = myRegion ? myRegion->name : NULL;
     if (region != nullptr) {

src/main.cpp

@@ -1531,7 +1531,7 @@ extern meshtastic_DeviceMetadata getDeviceMetadata()
 #if ((!HAS_SCREEN || NO_EXT_GPIO) || MESHTASTIC_EXCLUDE_CANNEDMESSAGES) && !defined(MESHTASTIC_INCLUDE_NICHE_GRAPHICS)
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_CANNEDMSG_CONFIG;
 #endif
-#if NO_EXT_GPIO
+#if NO_EXT_GPIO || MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_EXTNOTIF_CONFIG;
 #endif
 // Only edge case here is if we apply this a device with built in Accelerometer and want to detect interrupts

src/mesh/Channels.cpp

@@ -368,7 +368,7 @@ const char *Channels::getName(size_t chIndex)
         // Per mesh.proto spec, if bandwidth is specified we must ignore modemPreset enum, we assume that in that case
         // the app effed up and forgot to set channelSettings.name
         if (config.lora.use_preset) {
-            channelName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
+            channelName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
         } else {
             channelName = "Custom";
         }
@@ -382,7 +382,8 @@ bool Channels::isDefaultChannel(ChannelIndex chIndex)
     const auto &ch = getByIndex(chIndex);
     if (ch.settings.psk.size == 1 && ch.settings.psk.bytes[0] == 1) {
         const char *name = getName(chIndex);
-        const char *presetName = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
+        const char *presetName =
+            DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset);
         // Check if the name is the default derived from the modem preset
         if (strcmp(name, presetName) == 0)
             return true;

src/mesh/RadioInterface.cpp

@@ -589,7 +589,8 @@ void RadioInterface::applyModemConfig()
 
     // Check if we use the default frequency slot
     RadioInterface::uses_default_frequency_slot =
-        channel_num == hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false)) % numChannels;
+        channel_num ==
+        hash(DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false, config.lora.use_preset)) % numChannels;
 
     // Old frequency selection formula
     // float freq = myRegion->freqStart + ((((myRegion->freqEnd - myRegion->freqStart) / numChannels) / 2) * channel_num);

src/modules/ExternalNotificationModule.cpp

@@ -364,9 +364,10 @@ ExternalNotificationModule::ExternalNotificationModule()
     // moduleConfig.external_notification.alert_message_buzzer = true;
 
     if (moduleConfig.external_notification.enabled) {
+#if !defined(MESHTASTIC_EXCLUDE_INPUTBROKER)
         if (inputBroker) // put our callback in the inputObserver list
             inputObserver.observe(inputBroker);
-
+#endif
         if (nodeDB->loadProto(rtttlConfigFile, meshtastic_RTTTLConfig_size, sizeof(meshtastic_RTTTLConfig),
                               &meshtastic_RTTTLConfig_msg, &rtttlConfig) != LoadFileResult::LOAD_SUCCESS) {
             memset(rtttlConfig.ringtone, 0, sizeof(rtttlConfig.ringtone));

src/modules/Modules.cpp

@@ -88,7 +88,7 @@
 #include "modules/StoreForwardModule.h"
 #endif
 #endif
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
+
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
 #include "modules/ExternalNotificationModule.h"
 #endif
@@ -98,7 +98,6 @@
 #if !defined(CONFIG_IDF_TARGET_ESP32S2) && !MESHTASTIC_EXCLUDE_SERIAL
 #include "modules/SerialModule.h"
 #endif
-#endif
 
 #if !MESHTASTIC_EXCLUDE_DROPZONE
 #include "modules/DropzoneModule.h"
@@ -246,8 +245,8 @@ void setupModules()
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_POWER_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         new PowerTelemetryModule();
 #endif
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32C3)
+    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
 #if !MESHTASTIC_EXCLUDE_SERIAL
         if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
             new SerialModule();
@@ -268,13 +267,11 @@ void setupModules()
         storeForwardModule = new StoreForwardModule();
 #endif
 #endif
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
         externalNotificationModule = new ExternalNotificationModule();
 #endif
 #if !MESHTASTIC_EXCLUDE_RANGETEST && !MESHTASTIC_EXCLUDE_GPS
         new RangeTestModule();
-#endif
 #endif
     } else {
 #if !MESHTASTIC_EXCLUDE_ADMIN

src/modules/RangeTestModule.cpp

@@ -31,7 +31,7 @@ uint32_t packetSequence = 0;
 
 int32_t RangeTestModule::runOnce()
 {
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_PORTDUINO)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_STM32WL) || defined(ARCH_PORTDUINO)
 
     /*
         Uncomment the preferences below if you want to use the module
@@ -130,7 +130,7 @@ void RangeTestModuleRadio::sendPayload(NodeNum dest, bool wantReplies)
 
 ProcessMessage RangeTestModuleRadio::handleReceived(const meshtastic_MeshPacket &mp)
 {
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_PORTDUINO)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_STM32WL) || defined(ARCH_PORTDUINO)
 
     if (moduleConfig.range_test.enabled) {
 

src/modules/SerialModule.cpp

@@ -49,8 +49,8 @@
 #include "meshSolarApp.h"
 #endif
 
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32C3)
+    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
 
 #define RX_BUFFER 256
 #define TIMEOUT 250
@@ -67,7 +67,7 @@ SerialModuleRadio *serialModuleRadio;
     defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE)
 SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial;
-#elif defined(CONFIG_IDF_TARGET_ESP32C6)
+#elif defined(CONFIG_IDF_TARGET_ESP32C6) || defined(RAK3172)
 SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial1;
 #else
@@ -173,7 +173,18 @@ int32_t SerialModule::runOnce()
                 Serial.begin(baud);
                 Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
             }
-
+#elif defined(ARCH_STM32WL)
+#ifndef RAK3172
+            HardwareSerial *serialInstance = &Serial2;
+#else
+            HardwareSerial *serialInstance = &Serial1;
+#endif
+            if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
+                serialInstance->setTx(moduleConfig.serial.txd);
+                serialInstance->setRx(moduleConfig.serial.rxd);
+            }
+            serialInstance->begin(baud);
+            serialInstance->setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
 #elif defined(ARCH_ESP32)
 
             if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
@@ -260,8 +271,13 @@ int32_t SerialModule::runOnce()
                 while (Serial1.available()) {
                     serialPayloadSize = Serial1.readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 #else
-                while (Serial2.available()) {
+#ifndef RAK3172
-                    serialPayloadSize = Serial2.readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
+                HardwareSerial *serialInstance = &Serial2;
+#else
+                HardwareSerial *serialInstance = &Serial1;
+#endif
+                while (serialInstance->available()) {
+                    serialPayloadSize = serialInstance->readBytes(serialBytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 #endif
                     serialModuleRadio->sendPayload();
                 }
@@ -511,7 +527,7 @@ ParsedLine parseLine(const char *line)
 void SerialModule::processWXSerial()
 {
 #if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) &&              \
-    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5)
+    !defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M5) && !defined(ARCH_STM32WL)
     static unsigned int lastAveraged = 0;
     static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
     static double dir_sum_sin = 0;

src/modules/SerialModule.h

@@ -8,8 +8,8 @@
 #include <Arduino.h>
 #include <functional>
 
-#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)) && !defined(CONFIG_IDF_TARGET_ESP32S2) &&               \
+#if (defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_STM32WL)) &&                             \
-    !defined(CONFIG_IDF_TARGET_ESP32C3)
+    !defined(CONFIG_IDF_TARGET_ESP32S2) && !defined(CONFIG_IDF_TARGET_ESP32C3)
 
 class SerialModule : public StreamAPI, private concurrency::OSThread
 {

variants/esp32/m5stack_core/variant.h

@@ -1,14 +1,13 @@
-// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+// Note: The M5Stack Core is now referred to as the M5Stack "Basic"
 
 #define I2C_SDA 21
 #define I2C_SCL 22
 
-// #define BUTTON_PIN 39 // 38, 37
-// #define BUTTON_PIN 0
-#define BUTTON_NEED_PULLUP
 // #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Plugin.
 
 #define BUTTON_PIN 38
+// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
+#define BUTTON_NEED_PULLUP
 
 #define PIN_BUZZER 25
 
@@ -23,8 +22,8 @@
 #define LORA_CS 5
 
 #define USE_RF95
-#define LORA_DIO0 36 // a No connect on the SX1262 module
+#define LORA_DIO0 35 // IRQ
-#define LORA_RESET 26
+#define LORA_RESET 25
 #define LORA_DIO1 RADIOLIB_NC // Not really used
 #define LORA_DIO2 RADIOLIB_NC // Not really used
 

variants/nrf52840/tracker-t1000-e/variant.h

@@ -124,8 +124,7 @@ extern "C" {
 #define GPS_RTC_INT (0 + 15)     // P0.15, normal is LOW, wake by HIGH
 #define GPS_RESETB_OUT (32 + 14) // P1.14, always input pull_up
 
-#define GPS_FIX_HOLD_TIME 15000 // ms
+#define BATTERY_PIN 2 // P0.02/AIN0, BAT_ADC
-#define BATTERY_PIN 2           // P0.02/AIN0, BAT_ADC
 #define BATTERY_IMMUTABLE
 #define ADC_MULTIPLIER (2.0F)
 // P0.04/AIN2 is VCC_ADC, P0.05/AIN3 is CHARGER_DET, P1.03 is CHARGE_STA, P1.04 is CHARGE_DONE

variants/nrf52840/wio-t1000-s/variant.h

@@ -123,7 +123,6 @@ extern "C" {
 #define GPS_RESETB_OUT (32 + 14) // P1.14, awlays input pull_up
 
 // #define GPS_THREAD_INTERVAL 50
-#define GPS_FIX_HOLD_TIME 15000 // ms
 
 #define BATTERY_PIN 2
 // #define ADC_CHANNEL ADC1_GPIO2_CHANNEL
@@ -157,4 +156,4 @@ extern "C" {
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif // _VARIANT_WIO_SDK_WM1110_
+#endif // _VARIANT_WIO_SDK_WM1110_

variants/stm32/rak3172/platformio.ini

@@ -6,6 +6,10 @@ board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
 build_flags =
   ${stm32_base.build_flags}
   -Ivariants/stm32/rak3172
+  -DRAK3172
+  -DENABLE_HWSERIAL1
+  -DPIN_SERIAL1_RX=PB7
+  -DPIN_SERIAL1_TX=PB6
   -DPIN_WIRE_SDA=PA11
   -DPIN_WIRE_SCL=PA12
   -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1