Merge b2e1dbcca8 into bd3cbfc1ad

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

.trunk/trunk.yaml

@@ -9,14 +9,14 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.467
-    - renovate@41.88.0
+    - renovate@41.90.1
     - prettier@3.6.2
     - trufflehog@3.90.5
     - yamllint@1.37.1
     - bandit@1.8.6
     - trivy@0.65.0
     - taplo@0.10.0
-    - ruff@0.12.10
+    - ruff@0.12.11
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,9 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.8" date="2025-08-30">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
+    </release>
     <release version="2.7.7" date="2025-08-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
     </release>

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.8.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -41,4 +41,7 @@ meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
- -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 28 Aug 2025 10:33:25 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Sat, 30 Aug 2025 00:26:04 +0000

src/Power.cpp

@@ -128,6 +128,7 @@ RAK9154Sensor rak9154Sensor;
 #ifdef HAS_PPM
 // note: XPOWERS_CHIP_XXX must be defined in variant.h
 #include <XPowersLib.h>
+XPowersPPM *PPM = NULL;
 #endif
 
 #ifdef HAS_BQ27220
@@ -681,7 +682,7 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
-    }  else if (meshSolarInit()) {
+    } else if (meshSolarInit()) {
         found = true;
     } else if (analogInit()) {
         found = true;
@@ -745,7 +746,11 @@ void Power::shutdown()
 
 #if HAS_SCREEN
     if (screen) {
+#ifdef T_DECK_PRO
+        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
+#endif
     }
 #endif
 #if !defined(ARCH_STM32WL)
@@ -763,7 +768,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, true);
+    doDeepSleep(DELAY_FOREVER, true, true);
 #elif defined(ARCH_PORTDUINO)
     exit(EXIT_SUCCESS);
 #else
@@ -1320,7 +1325,6 @@ bool Power::lipoInit()
 class LipoCharger : public HasBatteryLevel
 {
   private:
-    XPowersPPM *ppm = nullptr;
     BQ27220 *bq = nullptr;
 
   public:
@@ -1329,41 +1333,41 @@ class LipoCharger : public HasBatteryLevel
      */
     bool runOnce()
     {
-        if (ppm == nullptr) {
+        if (PPM == nullptr) {
-            ppm = new XPowersPPM;
+            PPM = new XPowersPPM;
-            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
                 // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // ppm->setSysPowerDownVoltage(3100);
+                // PPM->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
-                // ppm->setInputCurrentLimit(800);
+                // PPM->setInputCurrentLimit(800);
 
                 // Disable current limit pin
-                // ppm->disableCurrentLimitPin();
+                // PPM->disableCurrentLimitPin();
 
                 // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                ppm->setChargeTargetVoltage(4288);
+                PPM->setChargeTargetVoltage(4288);
 
                 // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // ppm->setPrechargeCurr(64);
+                // PPM->setPrechargeCurr(64);
 
                 // The premise is that limit pin is disabled, or it will
                 // only follow the maximum charging current set by limit pin.
                 // Set the charging current , Range:0~5056mA ,step:64mA
-                ppm->setChargerConstantCurr(1024);
+                PPM->setChargerConstantCurr(1024);
 
                 // To obtain voltage data, the ADC must be enabled first
-                ppm->enableMeasure();
+                PPM->enableMeasure();
 
                 // Turn on charging function
                 // If there is no battery connected, do not turn on the charging function
-                ppm->enableCharge();
+                PPM->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
-                delete ppm;
+                delete PPM;
-                ppm = nullptr;
+                PPM = nullptr;
                 return false;
             }
         }
@@ -1404,23 +1408,23 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
+    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
 
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
      */
     virtual bool isCharging() override
     {
-        bool isCharging = ppm->isCharging();
+        bool isCharging = PPM->isCharging();
         if (isCharging) {
             LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
         } else {
-            if (!ppm->isVbusIn()) {
+            if (!PPM->isVbusIn()) {
                 LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
             }
         }
@@ -1453,8 +1457,6 @@ bool Power::lipoChargerInit()
 }
 #endif
 
-
-
 #ifdef HELTEC_MESH_SOLAR
 #include "meshSolarApp.h"
 
@@ -1492,7 +1494,7 @@ class meshSolarBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn();}
+    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
 
     /**
      * return true if the battery is currently charging

src/configuration.h

@@ -26,10 +26,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#ifdef RV3028_RTC
+#if __has_include("Melopero_RV3028.h")
 #include "Melopero_RV3028.h"
 #endif
-#ifdef PCF8563_RTC
+#if __has_include("pcf8563.h")
 #include "pcf8563.h"
 #endif
 

src/gps/RTC.cpp

@@ -55,9 +55,9 @@ RTCSetResult readFromRTC()
 
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
-        timeStartMsec = now;
-        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
+            timeStartMsec = now;
+            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;
@@ -94,9 +94,9 @@ RTCSetResult readFromRTC()
 
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
-        timeStartMsec = now;
-        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
+            timeStartMsec = now;
+            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;

src/main.cpp

@@ -419,7 +419,7 @@ void setup()
     struct timeval tv;
     tv.tv_sec = time(NULL);
     tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityNTP, &tv);
+    perhapsSetRTC(RTCQualityDevice, &tv);
 #endif
 
     powerMonInit();

src/sleep.cpp

@@ -32,6 +32,16 @@ esp_sleep_source_t wakeCause; // the reason we booted this time
 #endif
 #include "Throttle.h"
 
+#ifdef USE_XL9555
+#include "ExtensionIOXL9555.hpp"
+extern ExtensionIOXL9555 io;
+#endif
+
+#ifdef HAS_PPM
+#include <XPowersLib.h>
+extern XPowersPPM *PPM;
+#endif
+
 #ifndef INCLUDE_vTaskSuspend
 #define INCLUDE_vTaskSuspend 0
 #endif
@@ -297,6 +307,14 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
 #endif
 #endif
 
+#ifdef HAS_PPM
+    if (PPM) {
+        LOG_INFO("PMM shutdown");
+        console->flush();
+        PPM->shutdown();
+    }
+#endif
+
 #ifdef HAS_PMU
     if (pmu_found && PMU) {
         // Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
@@ -412,6 +430,16 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     if (pmu_found)
         gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
 #endif
+
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power down XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, LOW);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.digitalWrite(EXPANDS_KB_EN, LOW);
+    io.digitalWrite(EXPANDS_SD_EN, LOW);
+    io.digitalWrite(EXPANDS_GPIO_EN, LOW);
+#endif
+
     auto res = esp_sleep_enable_gpio_wakeup();
     if (res != ESP_OK) {
         LOG_ERROR("esp_sleep_enable_gpio_wakeup result %d", res);
@@ -452,6 +480,14 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
         gpio_wakeup_disable((gpio_num_t)RF95_IRQ);
     }
 #endif
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power up XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+#endif
 
     esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
     notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here

variants/native/portduino/platformio.ini

@@ -3,7 +3,10 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -I variants/native/portduino
   -I /usr/include
 board = cross_platform
-lib_deps = ${portduino_base.lib_deps}
+lib_deps = 
+  ${portduino_base.lib_deps}
+  melopero/Melopero RV3028@^1.1.0
+
 build_src_filter = ${portduino_base.build_src_filter}
 
 [env:native]

variants/native/portduino/variant.h

@@ -4,4 +4,7 @@
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE settingsMap[maxtophone]
-#define MAX_NUM_NODES settingsMap[maxnodes]
+#define MAX_NUM_NODES settingsMap[maxnodes]
+
+// RAK12002 RTC Module
+#define RV3028_RTC (uint8_t)0b1010010

variants/nrf52840/diy/easy-nrf52-promicro_e22/platformio.ini

@@ -0,0 +1,11 @@
+; DIY no custom PCB, easy construction node based on Pro Micro Supermini NRF52840 Development Board + E22 900M30S
+[env:easy-pro_micro_nrf_e22]
+extends = nrf52840_base
+board = promicro-nrf52840
+build_flags = ${nrf52840_base.build_flags}
+  -I variants/nrf52840/diy/easy-nrf52-promicro_e22
+  -D PRIVATE_HW
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants//nrf52840/diy/easy-nrf52-promicro_e22>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+debug_tool = jlink

variants/nrf52840/diy/easy-nrf52-promicro_e22/variant.cpp

@@ -0,0 +1,38 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0
+    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // 3V3 Power Rail
+    pinMode(PIN_3V3_EN, OUTPUT);
+    digitalWrite(PIN_3V3_EN, HIGH);
+}

variants/nrf52840/diy/easy-nrf52-promicro_e22/variant.h

@@ -0,0 +1,192 @@
+/*
+A DIY, easy, no PCB, basic but powerful node based on E22 900M33S and
+Pro Micro compatible NRF52840 dev boards such as the Tenstar Robot
+Supermini or Nice Nano.
+
+Without adding GPS or other peripherals, this node should run about 45
+hours on a 1S 1000 mAh battery.
+
+This node can be constructed by directly soldering the development
+board directly to an EBYTE E22 900m30S.  There will be 7 directly
+soldered pads, 3 header pins, and only 1 wire connection required.
+
+You can power the node via USB or a battery, or you can install a power
+connector on the GND and VCC pads of the E22; a JST PH or XH socket
+should fit.  It may be easiest to install this first if you want it.
+
+Note that the E22-900M33S will output near it's specified power level
+only when supplied with 5-5.5 volts.  If you take advantage of the
+battery charger on the Pro Micro board and power everything from a 1S
+Lithium battery, the E22-900M33S will output a maximum of about 1
+Watt.
+
+Be sure to perform the initial flash of the Meshtastic firmware before
+proceeding with the assembly to protect the E22 and ensure that the
+TXEN pad is not driven when it shouldn't be.
+
+Detailed build instructions can be found here:
+https://github.com/brad112358/easy_E22?tab=readme-ov-file#easy-diy-e22-nrf52840-build-instructions
+
+*/
+
+#ifndef _VARIANT_EASY_PROMICRO_DIY_
+#define _VARIANT_EASY_PROMICRO_DIY_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+// #define USE_LFXO // Board uses 32khz crystal for LF
+#define USE_LFRC // Board uses RC for LF
+
+#define PROMICRO_DIY_TCXO
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+/*
+E22/NRF52 PRO MICRO PIN ASSIGNMENT
+
+| Pin   | Function    |     | Pin      | Function     |
+| ----- | ----------- | --- | -------- | ------------ |
+| Gnd   |             |     | vbat     |              |
+| P0.06 | Serial2 RX  |     | vbat     |              |
+| P0.08 | Serial2 TX  |     | Gnd      |              |
+| Gnd   |             |     | reset    |              |
+| Gnd   | GND         |     | ext_vcc  | *see 0.13    |
+| P0.17 | Free pin    |     | P0.31    | BATTERY_PIN  |
+| P0.20 | Free pin    |     | P0.29    | DI01         |
+| P0.22 | Free pin    |     | P0.02    | BUSY         |
+| P0.24 | Free pin    |     | P1.15    | NRST         |
+| P1.00 | TXEN        |     | P1.13    | MISO         |
+| P0.11 | RXEN        |     | P1.11    | MOSI         |
+| P1.04 | SDA         |     | P0.10    | SCK          |
+| P1.06 | SCL         |     | P0.09    | NSS          |
+|       |             |     |          |              |
+|       | Mid board   |     |          | Internal     |
+| P1.01 | GPS_TX      |     | 0.15     | LED          |
+| P1.02 | GPS_RX      |     | 0.13     | 3V3_EN       |
+| P1.07 | GPS_EN      |     |          |              |
+*/
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// Pin 13 enables 3.3V periphery.
+#define PIN_3V3_EN (0 + 13) // P0.13
+
+// Battery
+#define BATTERY_PIN (0 + 31) // P0.31
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define ADC_RESOLUTION 14
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
+#define VBAT_MV_PER_LSB (0.73242188F)
+// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M))
+#define VBAT_DIVIDER (0.6F)
+// Compensation factor for the VBAT divider
+#define VBAT_DIVIDER_COMP (2.02) // 2 + magic for current drain of input
+// Fixed calculation of milliVolt from compensation value
+#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
+#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
+
+// WIRE IC AND IIC PINS
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (32 + 4) // P1.04
+#define PIN_WIRE_SCL (32 + 6) // P1.06
+
+// LED
+#define PIN_LED1 (0 + 15) // P0.15
+#define LED_BUILTIN PIN_LED1
+// Actually red
+#define LED_BLUE PIN_LED1
+#define LED_STATE_ON 1 // State when LED is lit
+
+// Button
+// #define BUTTON_PIN // no button
+
+// GPS
+#define PIN_GPS_TX (32 + 1) // P1.01
+#define PIN_GPS_RX (32 + 2) // P1.02
+
+#define PIN_GPS_EN (32 + 7) // P1.07
+#define GPS_POWER_TOGGLE
+#define GPS_UBLOX
+// define GPS_DEBUG
+
+// UART interfaces
+#define PIN_SERIAL1_RX PIN_GPS_TX
+#define PIN_SERIAL1_TX PIN_GPS_RX
+
+#define PIN_SERIAL2_RX (0 + 6) // P0.06
+#define PIN_SERIAL2_TX (0 + 8) // P0.08
+
+// Serial interfaces
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (32 + 13) // P1.13
+#define PIN_SPI_MOSI (32 + 11) // P1.11
+#define PIN_SPI_SCK (0 + 10)   // P0.10
+
+#define LORA_MISO PIN_SPI_MISO
+#define LORA_MOSI PIN_SPI_MOSI
+#define LORA_SCK PIN_SPI_SCK
+#define LORA_CS (0 + 9) // P0.09 NSS
+
+// LORA MODULE
+#define USE_SX1262
+
+#define LORA_DIO0 (0 + 2)    // P0.02 BUSY
+#define LORA_DIO1 (0 + 29)   // P0.29 IRQ
+#define LORA_RESET (32 + 15) // P1.15 NRST
+
+// SX126X CONFIG
+#undef TX_GAIN_LORA
+#define TX_GAIN_LORA 22    // 8 for E22 900M30S, 25 for 900M33S, 22 for 3.7V battery powered 900M33S,  0 for 900M22S
+#define SX126X_MAX_POWER 8 // 8 for 900M33S, 22 for 900M30S and 900M22S; defaults to 22 if not defined
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO0
+#define SX126X_RESET LORA_RESET
+#define SX126X_RXEN (0 + 11) // P0.11
+#define SX126X_TXEN (32 + 0) // P1.00
+
+/*
+| Mfr          | Module           | TCXO | RF Switch | Notes                                 |
+| ------------ | ---------------- | ---- | --------- | ------------------------------------- |
+| Ebyte        | E22-900M22S      | Yes  | Ext       |                                       |
+| Ebyte        | E22-900M30S      | Yes  | Ext       |                                       |
+| Ebyte        | E22-900M33S      | Yes  | Ext       | MAX_POWER must be set to 8 for this!  |
+
+On the SX1262, DIO3 sets the voltage for an external TCXO, if one is present. If one is not present, use TCXO_OPTIONAL to try both
+settings.
+*/
+
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -208,7 +208,7 @@ No longer populated on PCB
 #undef AREF_VOLTAGE
 #define AREF_VOLTAGE 3.0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
-#define ADC_MULTIPLIER (4.90F)
+#define ADC_MULTIPLIER (4.99F)
 
 #define HAS_RTC 0
 #ifdef __cplusplus

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 7
+build = 8