Merge db5a627e7c into b5a8e8f51b

* treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE

* stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

src/mesh/Router.cpp

@@ -224,9 +224,10 @@ ErrorCode Router::send(meshtastic_MeshPacket *p)
     if (!config.lora.override_duty_cycle && myRegion->dutyCycle < 100) {
         float hourlyTxPercent = airTime->utilizationTXPercent();
         if (hourlyTxPercent > myRegion->dutyCycle) {
-#ifdef DEBUG_PORT
             uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, myRegion->dutyCycle);
+
             LOG_WARN("Duty cycle limit exceeded. Aborting send for now, you can send again in %d mins", silentMinutes);
+
             meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();
             cn->has_reply_id = true;
             cn->reply_id = p->id;
@@ -234,7 +235,7 @@ ErrorCode Router::send(meshtastic_MeshPacket *p)
             cn->time = getValidTime(RTCQualityFromNet);
             sprintf(cn->message, "Duty cycle limit exceeded. You can send again in %d mins", silentMinutes);
             service->sendClientNotification(cn);
-#endif
+
             meshtastic_Routing_Error err = meshtastic_Routing_Error_DUTY_CYCLE_LIMIT;
             if (isFromUs(p)) { // only send NAK to API, not to the mesh
                 abortSendAndNak(err, p);

src/mesh/wifi/WiFiAPClient.cpp

@@ -235,6 +235,11 @@ bool isWifiAvailable()
 #ifdef USE_WS5500
     } else if (config.network.eth_enabled) {
         return true;
+#endif
+#ifndef ARCH_PORTDUINO
+    } else if (WiFi.status() == WL_CONNECTED) {
+        // it's likely we have wifi now, but user intends to turn it off in config!
+        return true;
 #endif
     } else {
         return false;

src/modules/ReplyModule.cpp

@@ -8,7 +8,7 @@
 meshtastic_MeshPacket *ReplyModule::allocReply()
 {
     assert(currentRequest); // should always be !NULL
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
     auto req = *currentRequest;
     auto &p = req.decoded;
     // The incoming message is in p.payload

src/modules/Telemetry/AirQualityTelemetry.cpp

@@ -121,7 +121,7 @@ int32_t AirQualityTelemetryModule::runOnce()
 bool AirQualityTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Telemetry *t)
 {
     if (t->which_variant == meshtastic_Telemetry_air_quality_metrics_tag) {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
         const char *sender = getSenderShortName(mp);
 
         LOG_INFO("(Received from %s): pm10_standard=%i, pm25_standard=%i, pm100_standard=%i", sender,

src/modules/Telemetry/DeviceTelemetry.cpp

@@ -49,7 +49,7 @@ bool DeviceTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &
         return false;
 
     if (t->which_variant == meshtastic_Telemetry_device_metrics_tag) {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
         const char *sender = getSenderShortName(mp);
 
         LOG_INFO("(Received from %s): air_util_tx=%f, channel_utilization=%f, battery_level=%i, voltage=%f", sender,

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -502,7 +502,7 @@ void EnvironmentTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiSt
 bool EnvironmentTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Telemetry *t)
 {
     if (t->which_variant == meshtastic_Telemetry_environment_metrics_tag) {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
         const char *sender = getSenderShortName(mp);
 
         LOG_INFO("(Received from %s): barometric_pressure=%f, current=%f, gas_resistance=%f, relative_humidity=%f, "

src/modules/Telemetry/HealthTelemetry.cpp

@@ -149,7 +149,7 @@ void HealthTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *
 bool HealthTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Telemetry *t)
 {
     if (t->which_variant == meshtastic_Telemetry_health_metrics_tag) {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
         const char *sender = getSenderShortName(mp);
 
         LOG_INFO("(Received from %s): temperature=%f, heart_bpm=%d, spO2=%d,", sender, t->variant.health_metrics.temperature,

src/modules/Telemetry/HostMetrics.cpp

@@ -27,7 +27,7 @@ bool HostMetricsModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp,
         return false;
 
     if (t->which_variant == meshtastic_Telemetry_host_metrics_tag) {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
         const char *sender = getSenderShortName(mp);
         if (t->variant.host_metrics.has_user_string)
             t->variant.host_metrics.user_string[sizeof(t->variant.host_metrics.user_string) - 1] = '\0';

src/modules/Telemetry/PowerTelemetry.cpp

@@ -168,7 +168,7 @@ void PowerTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *s
 bool PowerTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Telemetry *t)
 {
     if (t->which_variant == meshtastic_Telemetry_power_metrics_tag) {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
         const char *sender = getSenderShortName(mp);
 
         LOG_INFO("(Received from %s): ch1_voltage=%.1f, ch1_current=%.1f, ch2_voltage=%.1f, ch2_current=%.1f, "

src/modules/TextMessageModule.cpp

@@ -9,7 +9,7 @@ TextMessageModule *textMessageModule;
 
 ProcessMessage TextMessageModule::handleReceived(const meshtastic_MeshPacket &mp)
 {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
     auto &p = mp.decoded;
     LOG_INFO("Received text msg from=0x%0x, id=0x%x, msg=%.*s", mp.from, mp.id, p.payload.size, p.payload.bytes);
 #endif

src/modules/TraceRouteModule.cpp

@@ -232,7 +232,7 @@ void TraceRouteModule::appendMyIDandSNR(meshtastic_RouteDiscovery *updated, floa
 
 void TraceRouteModule::printRoute(meshtastic_RouteDiscovery *r, uint32_t origin, uint32_t dest, bool isTowardsDestination)
 {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
     std::string route = "Route traced:\n";
     route += vformat("0x%x --> ", origin);
     for (uint8_t i = 0; i < r->route_count; i++) {

src/modules/WaypointModule.cpp

@@ -16,7 +16,7 @@ WaypointModule *waypointModule;
 
 ProcessMessage WaypointModule::handleReceived(const meshtastic_MeshPacket &mp)
 {
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
     auto &p = mp.decoded;
     LOG_INFO("Received waypoint msg from=0x%0x, id=0x%x, msg=%.*s", mp.from, mp.id, p.payload.size, p.payload.bytes);
 #endif

src/platform/stm32wl/architecture.h

@@ -32,3 +32,8 @@
 #define SX126X_DIO1 1001
 #define SX126X_RESET 1003
 #define SX126X_BUSY 1004
+
+#if !defined(DEBUG_MUTE) && !defined(PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF)
+#error                                                                                                                           \
+    "You MUST enable PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF if debug prints are enabled. printf will print uninitialized garbage instead of floats."
+#endif

src/sleep.cpp

@@ -131,7 +131,7 @@ void initDeepSleep()
       support busted boards, assume button one was pressed wakeButtons = ((uint64_t)1) << buttons.gpios[0];
       */
 
-#ifdef DEBUG_PORT
+#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE)
     // If we booted because our timer ran out or the user pressed reset, send those as fake events
     RESET_REASON hwReason = rtc_get_reset_reason(0);