[WIP] Add RAK12035VB Soil Moisture Sensor support

Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.

This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.

Co-Authored-By: @Justin-Mann

.gitattributes

@@ -1,4 +1,5 @@
 * text=auto eol=lf
 *.{cmd,[cC][mM][dD]} text eol=crlf
 *.{bat,[bB][aA][tT]} text eol=crlf
+*.{ps1,[pP][sS]} text eol=crlf
 *.{sh,[sS][hH]} text eol=lf

.vscode/settings.json

@@ -7,5 +7,8 @@
   "cmake.configureOnOpen": false,
   "[cpp]": {
     "editor.defaultFormatter": "trunk.io"
+  },
+  "[powershell]": {
+    "editor.defaultFormatter": "ms-vscode.powershell"
   }
 }

bin/device-install.bat

@@ -20,7 +20,7 @@ ECHO.
 ECHO Usage: %SCRIPT_NAME% -f filename [-p PORT] [-P python] (--web)
 ECHO.
 ECHO Options:
-ECHO     -f filename      The .bin file to flash.  Custom to your device type and region. (required)
+ECHO     -f filename      The firmware .bin file to flash.  Custom to your device type and region. (required)
 ECHO                      The file must be located in this current directory.
 ECHO     -p PORT          Set the environment variable for ESPTOOL_PORT.
 ECHO                      If not set, ESPTOOL iterates all ports (Dangerous).
@@ -30,7 +30,7 @@ ECHO                      If not supplied the script will try to find esptool in
 ECHO     --web            Enable WebUI. (default: false)
 ECHO.
 ECHO Example: %SCRIPT_NAME% -f firmware-t-deck-tft-2.6.0.0b106d4.bin -p COM11
-ECHO Example: %SCRIPT_NAME% -f littlefs-unphone-2.6.0.0b106d4.bin -p COM11 --web
+ECHO Example: %SCRIPT_NAME% -f firmware-unphone-2.6.0.0b106d4.bin -p COM11 --web
 GOTO eof
 
 :version
@@ -60,16 +60,20 @@ IF "__!FILENAME!__"=="____" (
     CALL :LOG_MESSAGE DEBUG "Missing -f filename input."
     GOTO help
 ) ELSE (
+    CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
     IF NOT "__!FILENAME: =!__"=="__!FILENAME!__" (
         CALL :LOG_MESSAGE ERROR "Filename containing spaces are not supported."
         GOTO help
     )
+    IF "__!FILENAME:firmware-=!__"=="__!FILENAME!__" (
+        CALL :LOG_MESSAGE ERROR "Filename must be a firmware-* file."
+        GOTO help
+    )
     @REM Remove ".\" or "./" file prefix if present.
     SET "FILENAME=!FILENAME:.\=!"
     SET "FILENAME=!FILENAME:./=!"
 )
 
-CALL :LOG_MESSAGE DEBUG "Filename: !FILENAME!"
 CALL :LOG_MESSAGE DEBUG "Checking if !FILENAME! exists..."
 IF NOT EXIST !FILENAME! (
     CALL :LOG_MESSAGE ERROR "File does not exist: !FILENAME!. Terminating."

bin/device-install.sh

@@ -29,7 +29,7 @@ Flash image file to device, but first erasing and writing system information.
     -h               Display this help and exit.
     -p ESPTOOL_PORT  Set the environment variable for ESPTOOL_PORT.  If not set, ESPTOOL iterates all ports (Dangerous).
     -P PYTHON        Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON")
-    -f FILENAME      The .bin file to flash.  Custom to your device type and region.
+    -f FILENAME      The firmware .bin file to flash.  Custom to your device type and region.
     --web            Enable WebUI. (Default: false)
 
 EOF
@@ -73,6 +73,11 @@ done
 	shift
 }
 
+if [[ $FILENAME != firmware-* ]]; then
+  echo "Filename must be a firmware-* file."
+  exit 1
+fi
+
 # Check if FILENAME contains "-tft-" and set target partitionScheme accordingly.
 if [[ ${FILENAME//-tft-/} != "$FILENAME" ]]; then
 	TFT_BUILD=true

bin/device-install_test.ps1

@@ -25,10 +25,10 @@ param()
 function New-EmptyFile() {
     [CmdletBinding()]
     param (
-        [Parameter(Position=0,Mandatory=$true)]
+        [Parameter(Position = 0, Mandatory = $true)]
         # Specifies the file name.
         [string]$FileName,
-        [Parameter(Position=1)]
+        [Parameter(Position = 1)]
         # Specifies the target path. (Get-Location).Path is the default.
         [string]$Directory = (Get-Location).Path
     )
@@ -42,10 +42,10 @@ function New-EmptyFile() {
 function Remove-EmptyFile() {
     [CmdletBinding()]
     param (
-        [Parameter(Position=0,Mandatory=$true)]
+        [Parameter(Position = 0, Mandatory = $true)]
         # Specifies the file name.
         [string]$FileName,
-        [Parameter(Position=1)]
+        [Parameter(Position = 1)]
         # Specifies the target path. (Get-Location).Path is the default.
         [string]$Directory = (Get-Location).Path
     )
@@ -60,14 +60,14 @@ function Remove-EmptyFile() {
 $TestCases = New-Object -TypeName PSObject -Property @{
     # Use this PSObject to define testcases according to this syntax:
     # "testname" = @("firmware-testname","bleota","littlefs-testname","args")
-    "t-deck" = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-2.6.0.0b106d4.bin","")
+    "t-deck"                       = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-2.6.0.0b106d4.bin", "")
-    "t-deck_web" = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-t-deck-2.6.0.0b106d4.bin","--web")
+    "t-deck_web"                   = @("firmware-t-deck-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-t-deck-2.6.0.0b106d4.bin", "--web")
-    "t-deck-tft" = @("firmware-t-deck-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-tft-2.6.0.0b106d4.bin","")
+    "t-deck-tft"                   = @("firmware-t-deck-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-t-deck-tft-2.6.0.0b106d4.bin", "")
-    "heltec-ht62-esp32c3" = @("firmware-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "bleota-c3.bin", "littlefs-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin","")
+    "heltec-ht62-esp32c3"          = @("firmware-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "bleota-c3.bin", "littlefs-heltec-ht62-esp32c3-sx1262-2.6.0.0b106d4.bin", "")
-    "tlora-c6" = @("firmware-tlora-c6-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-tlora-c6-2.6.0.0b106d4.bin","")
+    "tlora-c6"                     = @("firmware-tlora-c6-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-tlora-c6-2.6.0.0b106d4.bin", "")
-    "heltec-v3_web" = @("firmware-heltec-v3-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-heltec-v3-2.6.0.0b106d4.bin","--web")
+    "heltec-v3_web"                = @("firmware-heltec-v3-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefswebui-heltec-v3-2.6.0.0b106d4.bin", "--web")
-    "seeed-sensecap-indicator-tft" = @("firmware-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin","")
+    "seeed-sensecap-indicator-tft" = @("firmware-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "bleota.bin", "littlefs-seeed-sensecap-indicator-tft-2.6.0.0b106d4.bin", "")
-    "picomputer-s3-tft" = @("firmware-picomputer-s3-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-picomputer-s3-tft-2.6.0.0b106d4.bin","")
+    "picomputer-s3-tft"            = @("firmware-picomputer-s3-tft-2.6.0.0b106d4.bin", "bleota-s3.bin", "littlefs-picomputer-s3-tft-2.6.0.0b106d4.bin", "")
 }
 
 foreach ($TestCase in $TestCases.PSObject.Properties) {
@@ -88,9 +88,10 @@ foreach ($TestCase in $TestCases.PSObject.Properties) {
 
     foreach ($Line in $Test) {
         if ($Line -match "Set OTA_OFFSET to" -or `
-            $Line -match "Set SPIFFS_OFFSET to") {
+                $Line -match "Set SPIFFS_OFFSET to") {
             Write-Host -Object "$($Line -replace "^.*?Set","Set")" -ForegroundColor Blue
-        } elseif ($VerbosePreference -eq "Continue") {
+        }
+        elseif ($VerbosePreference -eq "Continue") {
             Write-Host -Object $Line
         }
         if ($Line -match "ERROR") {
@@ -100,7 +101,7 @@ foreach ($TestCase in $TestCases.PSObject.Properties) {
     }
     if ($null -ne $Errors) {
         Write-Host -Object "$Counter ERROR(s) detected!" -ForegroundColor Red
-        if (-not ($VerbosePreference -eq "Continue")) {Write-Host -Object $Errors}
+        if (-not ($VerbosePreference -eq "Continue")) { Write-Host -Object $Errors }
     }
 
     foreach ($File in $Files) {

platformio.ini

@@ -94,7 +94,7 @@ lib_deps =
 
 [device-ui_base]
 lib_deps =
-	https://github.com/meshtastic/device-ui.git#d7b18e98704f988fcda9e5fa7404e677b3d11f8c
+	https://github.com/meshtastic/device-ui.git#74e739ed4532ca10393df9fc89ae5a22f0bab2b1
 
 ; Common libs for environmental measurements in telemetry module
 ; (not included in native / portduino)

src/configuration.h

@@ -186,6 +186,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 #define FT6336U_ADDR 0x48
 
+// -----------------------------------------------------------------------------
+// RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
+// - the default i2c address for this sensor is 0x20, and users are instructed to
+// set 0x21 and 0x22 for the second and third sensor if present.
+// -----------------------------------------------------------------------------
+#define RAK120351_ADDR 0x20
+#define RAK120352_ADDR 0x21
+#define RAK120353_ADDR 0x22
+
 // -----------------------------------------------------------------------------
 // BIAS-T Generator
 // -----------------------------------------------------------------------------

src/detect/ScanI2C.h

@@ -69,6 +69,7 @@ class ScanI2C
         DFROBOT_RAIN,
         DPS310,
         LTR390UV,
+        RAK12035,
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -417,9 +417,21 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                     logFoundDevice("BMA423", (uint8_t)addr.address);
                 }
                 break;
+            case TCA9535_ADDR:
+            case RAK120352_ADDR:
+            case RAK120353_ADDR:
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x02), 1);
+                if (registerValue == addr.address) { // RAK12035 returns its I2C address at 0x02 (eg 0x20)
+                    type = RAK12035;
+                    logFoundDevice("RAK12035", (uint8_t)addr.address);
+                } else {
+                    type = TCA9535;
+                    logFoundDevice("TCA9535", (uint8_t)addr.address);
+                }
+
+                break;
 
                 SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address);
-                SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address);
                 SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address);

src/main.cpp

@@ -643,6 +643,7 @@ void setup()
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::DFROBOT_RAIN, meshtastic_TelemetrySensorType_DFROBOT_RAIN);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::LTR390UV, meshtastic_TelemetrySensorType_LTR390UV);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::DPS310, meshtastic_TelemetrySensorType_DPS310);
+    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::RAK12035, meshtastic_TelemetrySensorType_RAK12035);
 
     i2cScanner.reset();
 #endif
@@ -1225,8 +1226,12 @@ extern meshtastic_DeviceMetadata getDeviceMetadata()
 #if MESHTASTIC_EXCLUDE_AUDIO
     deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_AUDIO_CONFIG;
 #endif
-#if !HAS_SCREEN || NO_EXT_GPIO
+// Option to explicitly include canned messages for edge cases, e.g. niche graphics
-    deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_CANNEDMSG_CONFIG | meshtastic_ExcludedModules_EXTNOTIF_CONFIG;
+#if (!HAS_SCREEN && NO_EXT_GPIO) && !MESHTASTIC_INCLUDE_CANNEDMSG
+    deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_CANNEDMSG_CONFIG;
+#endif
+#if NO_EXT_GPIO
+    deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_EXTNOTIF_CONFIG;
 #endif
 // Only edge case here is if we apply this a device with built in Accelerometer and want to detect interrupts
 // We'll have to macro guard against those targets potentially

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -41,6 +41,9 @@
 #include "Sensor/SHTC3Sensor.h"
 #include "Sensor/TSL2591Sensor.h"
 #include "Sensor/VEML7700Sensor.h"
+#ifdef RAK4630
+#include "Sensor/RAK12035Sensor.h"
+#endif
 
 BMP085Sensor bmp085Sensor;
 BMP280Sensor bmp280Sensor;
@@ -63,6 +66,9 @@ DFRobotGravitySensor dfRobotGravitySensor;
 NAU7802Sensor nau7802Sensor;
 BMP3XXSensor bmp3xxSensor;
 CGRadSensSensor cgRadSens;
+#ifdef RAK4630
+RAK12035Sensor rak12035Sensor;
+#endif
 #endif
 #ifdef T1000X_SENSOR_EN
 #include "Sensor/T1000xSensor.h"
@@ -72,6 +78,7 @@ T1000xSensor t1000xSensor;
 #include "Sensor/IndicatorSensor.h"
 IndicatorSensor indicatorSensor;
 #endif
+
 #define FAILED_STATE_SENSOR_READ_MULTIPLIER 10
 #define DISPLAY_RECEIVEID_MEASUREMENTS_ON_SCREEN true
 
@@ -171,6 +178,11 @@ int32_t EnvironmentTelemetryModule::runOnce()
 
             result = rak9154Sensor.runOnce();
 #endif
+#ifdef RAK4630
+            if (rak12035Sensor.hasSensor()) {
+                result = rak12035Sensor.runOnce();
+            }
+#endif
 #endif
         }
         // it's possible to have this module enabled, only for displaying values on the screen.
@@ -498,6 +510,12 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
     valid = valid && rak9154Sensor.getMetrics(m);
     hasSensor = true;
 #endif
+#ifdef RAK4630
+    if (rak12035Sensor.hasSensor()) {
+        valid = valid && rak12035Sensor.getMetrics(m);
+        hasSensor = true;
+    }
+#endif
 #endif
     return valid && hasSensor;
 }
@@ -552,6 +570,9 @@ bool EnvironmentTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 
         LOG_INFO("Send: radiation=%fµR/h", m.variant.environment_metrics.radiation);
 
+        LOG_INFO("Send: soil_temperature=%f, soil_moisture=%u", m.variant.environment_metrics.soil_temperature,
+                 m.variant.environment_metrics.soil_moisture);
+
         sensor_read_error_count = 0;
 
         meshtastic_MeshPacket *p = allocDataProtobuf(m);
@@ -710,8 +731,15 @@ AdminMessageHandleResult EnvironmentTelemetryModule::handleAdminMessageForModule
         if (result != AdminMessageHandleResult::NOT_HANDLED)
             return result;
     }
+#ifdef RAK4630
+    if (rak12035Sensor.hasSensor()) {
+        result = rak12035Sensor.handleAdminMessage(mp, request, response);
+        if (result != AdminMessageHandleResult::NOT_HANDLED)
+            return result;
+    }
+#endif
 #endif
     return result;
 }
 
-#endif
+#endif

src/modules/Telemetry/Sensor/RAK12035Sensor.cpp

@@ -0,0 +1,118 @@
+#include "configuration.h"
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(RAK4630)
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "RAK12035Sensor.h"
+
+RAK12035Sensor::RAK12035Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_RAK12035, "RAK12035") {}
+
+int32_t RAK12035Sensor::runOnce()
+{
+    LOG_INFO("Init sensor: %s", sensorName);
+    if (!hasSensor()) {
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+
+    sensor.set_sensor_addr(RAK120351_ADDR);
+
+    sensor.begin(nodeTelemetrySensorsMap[sensorType].first);
+    // Get sensor firmware version
+    uint8_t data = 0;
+    sensor.get_sensor_version(&data);
+    LOG_INFO("Sensor Firmware version: %i", data);
+
+    if (data != 0) {
+        LOG_DEBUG("RAK12035Sensor Init Succeed");
+        status = true;
+    } else {
+        LOG_ERROR("RAK12035Sensor Init Failed");
+        status = false;
+    }
+    sensor.sensor_sleep();
+    return initI2CSensor();
+}
+
+void RAK12035Sensor::setup()
+{
+    // Set the calibration values
+    // Reading the saved calibration values from the sensor.
+    uint16_t zero_val = 0;
+    uint16_t hundred_val = 0;
+    uint16_t default_zero_val = 550;
+    uint16_t default_hundred_val = 420;
+    sensor.sensor_on();
+    delay(200);
+    sensor.get_dry_cal(&zero_val);
+    sensor.get_wet_cal(&hundred_val);
+    delay(200);
+    if (zero_val == 0 || zero_val <= hundred_val) {
+        LOG_ERROR("Dry calibration value is %d", zero_val);
+        LOG_ERROR("Wet calibration value is %d", hundred_val);
+        LOG_ERROR("This does not make sense. Youc can recalibrate this sensor using the calibration sketch included here: "
+                  "https://github.com/RAKWireless/RAK12035_SoilMoisture.");
+        LOG_ERROR("For now, setting default calibration value for Dry Calibration: %d", default_zero_val);
+        sensor.set_dry_cal(default_zero_val);
+        sensor.get_dry_cal(&zero_val);
+        LOG_ERROR("Dry calibration reset complete. New value is %d", zero_val);
+    }
+    if (hundred_val == 0 || hundred_val >= zero_val) {
+        LOG_ERROR("Dry calibration value is %d", zero_val);
+        LOG_ERROR("Wet calibration value is %d", hundred_val);
+        LOG_ERROR("This does not make sense. Youc can recalibrate this sensor using the calibration sketch included here: "
+                  "https://github.com/RAKWireless/RAK12035_SoilMoisture.");
+        LOG_ERROR("For now, setting default calibration value for Wet Calibration: %d", default_hundred_val);
+        sensor.set_wet_cal(default_hundred_val);
+        sensor.get_wet_cal(&hundred_val);
+        LOG_ERROR("Wet calibration reset complete. New value is %d", hundred_val);
+    }
+    sensor.sensor_sleep();
+    delay(200);
+    LOG_INFO("Dry calibration value is %d", zero_val);
+    LOG_INFO("Wet calibration value is %d", hundred_val);
+}
+
+bool RAK12035Sensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    measurement->variant.environment_metrics.has_soil_temperature = true;
+    measurement->variant.environment_metrics.has_soil_moisture = true;
+
+    uint8_t moisture = 0;
+    uint16_t temp = 0;
+    bool success = false;
+
+    sensor.sensor_on();
+    delay(200);
+    success = sensor.get_sensor_moisture(&moisture);
+    delay(200);
+    success = sensor.get_sensor_temperature(&temp);
+    delay(200);
+    sensor.sensor_sleep();
+
+    if (success == false) {
+        LOG_ERROR("Failed to read sensor data");
+        return false;
+    }
+    LOG_INFO("Successful read from sensor Temperature: %.2f, Moisture: %ld%", (double)(temp / 10), moisture);
+    measurement->variant.environment_metrics.soil_temperature = (float)(temp / 10);
+    measurement->variant.environment_metrics.soil_moisture = moisture;
+
+    LOG_INFO("Check if the original temperature and moisture (relative_humidity) are being used.. if not just use them for the "
+             "soil monitoring.");
+
+    if (!measurement->variant.environment_metrics.has_temperature) {
+        LOG_INFO("Overwrite the temp metrics (not being set right now and this will allow the soil temp value to be used in the "
+                 "client interface).");
+        measurement->variant.environment_metrics.has_temperature = true;
+        measurement->variant.environment_metrics.temperature = (float)(temp / 10);
+    }
+
+    if (!measurement->variant.environment_metrics.has_relative_humidity) {
+        LOG_INFO("Overwrite the moisture metrics (not being used for air humidity and this will allow the soil humidity to "
+                 "appear in the client interfaces without adjustments).");
+        measurement->variant.environment_metrics.has_relative_humidity = true;
+        measurement->variant.environment_metrics.relative_humidity = (float)moisture;
+    }
+
+    return true;
+}
+#endif

src/modules/Telemetry/Sensor/RAK12035Sensor.h

@@ -0,0 +1,29 @@
+#pragma once
+
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && defined(RAK4630)
+#ifndef _MT_RAK12035VBSENSOR_H
+#define _MT_RAK12035VBSENSOR_H
+#endif
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "RAK12035_SoilMoisture.h"
+#include "TelemetrySensor.h"
+#include <Arduino.h>
+
+class RAK12035Sensor : public TelemetrySensor
+{
+  private:
+    RAK12035 sensor;
+
+  protected:
+    virtual void setup() override;
+
+  public:
+    RAK12035Sensor();
+    virtual int32_t runOnce() override;
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+};
+
+#endif

variants/rak4631/platformio.ini

@@ -20,6 +20,7 @@ lib_deps =
   https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
   https://github.com/RAKWireless/RAK12034-BMX160.git#dcead07ffa267d3c906e9ca4a1330ab989e957e2
+  beegee-tokyo/RAK12035_SoilMoisture@^1.0.3
 
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
@@ -52,4 +53,4 @@ lib_deps =
 upload_protocol = stlink
 ; eventually use platformio/tool-pyocd@^2.3600.0 instad
 ;upload_protocol = custom
-;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
+;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE

variants/rak4631/variant.h

@@ -90,6 +90,8 @@ static const uint8_t A7 = PIN_A7;
 // Other pins
 #define PIN_AREF (2)
 #define PIN_NFC1 (9)
+#define WB_IO5 PIN_NFC1
+#define WB_IO4 (4)
 #define PIN_NFC2 (10)
 
 static const uint8_t AREF = PIN_AREF;
@@ -217,6 +219,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 // enables 3.3V periphery like GPS or IO Module
 // Do not toggle this for GPS power savings
 #define PIN_3V3_EN (34)
+#define WB_IO2 PIN_3V3_EN
 
 // RAK1910 GPS module
 // If using the wisblock GPS module and pluged into Port A on WisBlock base
@@ -270,4 +273,4 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif
+#endif

variants/rak4631_epaper/platformio.ini

@@ -17,6 +17,7 @@ lib_deps =
   melopero/Melopero RV3028@^1.1.0
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
   beegee-tokyo/RAKwireless RAK12034@^1.0.0
+  beegee-tokyo/RAK12035_SoilMoisture@^1.0.3
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink

variants/rak4631_epaper/variant.h

@@ -90,6 +90,8 @@ static const uint8_t A7 = PIN_A7;
 // Other pins
 #define PIN_AREF (2)
 #define PIN_NFC1 (9)
+#define WB_IO5 PIN_NFC1
+#define WB_IO4 (4)
 #define PIN_NFC2 (10)
 
 static const uint8_t AREF = PIN_AREF;
@@ -188,6 +190,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
 
 // enables 3.3V periphery like GPS or IO Module
 #define PIN_3V3_EN (34)
+#define WB_IO2 PIN_3V3_EN
 
 // RAK1910 GPS module
 // If using the wisblock GPS module and pluged into Port A on WisBlock base
@@ -231,4 +234,4 @@ static const uint8_t SCK = PIN_SPI_SCK;
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif
+#endif

variants/rak4631_epaper_onrxtx/platformio.ini

@@ -19,6 +19,7 @@ lib_deps =
   melopero/Melopero RV3028@^1.1.0
   rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
   beegee-tokyo/RAKwireless RAK12034@^1.0.0
+  beegee-tokyo/RAK12035_SoilMoisture@^1.0.3
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink

variants/rak4631_epaper_onrxtx/variant.h

@@ -69,7 +69,9 @@ static const uint8_t A7 = PIN_A7;
 
 // Other pins
 #define PIN_AREF (2)
-// #define PIN_NFC1 (9)
+#define PIN_NFC1 (9)
+#define WB_IO5 PIN_NFC1
+#define WB_IO4 (4)
 // #define PIN_NFC2 (10)
 
 static const uint8_t AREF = PIN_AREF;
@@ -160,6 +162,7 @@ static const uint8_t SCK = PIN_SPI_SCK;
 
 // enables 3.3V periphery like GPS or IO Module
 #define PIN_3V3_EN (34)
+#define WB_IO2 PIN_3V3_EN
 
 // NO GPS
 #undef GPS_RX_PIN
@@ -202,4 +205,4 @@ static const uint8_t SCK = PIN_SPI_SCK;
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif
+#endif

variants/rak4631_eth_gw/variant.h

@@ -90,6 +90,8 @@ static const uint8_t A7 = PIN_A7;
 // Other pins
 #define PIN_AREF (2)
 #define PIN_NFC1 (9)
+#define WB_IO5 PIN_NFC1
+#define WB_IO4 (4)
 #define PIN_NFC2 (10)
 
 static const uint8_t AREF = PIN_AREF;
@@ -217,6 +219,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 // enables 3.3V periphery like GPS or IO Module
 // Do not toggle this for GPS power savings
 #define PIN_3V3_EN (34)
+#define WB_IO2 PIN_3V3_EN
 
 // RAK1910 GPS module
 // If using the wisblock GPS module and pluged into Port A on WisBlock base
@@ -270,4 +273,4 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif
+#endif

variants/rak_wismeshtap/platformio.ini

@@ -23,6 +23,7 @@ lib_deps =
   bodmer/TFT_eSPI
   beegee-tokyo/RAKwireless RAK12034@^1.0.0
   beegee-tokyo/RAK14014-FT6336U @ 1.0.1
+  beegee-tokyo/RAK12035_SoilMoisture@^1.0.3
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink

variants/rak_wismeshtap/variant.h

@@ -90,6 +90,8 @@ static const uint8_t A7 = PIN_A7;
 // Other pins
 #define PIN_AREF (2)
 #define PIN_NFC1 (9)
+#define WB_IO5 PIN_NFC1
+#define WB_IO4 (4)
 #define PIN_NFC2 (10)
 
 static const uint8_t AREF = PIN_AREF;
@@ -311,4 +313,4 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif
+#endif

variants/t-deck/platformio.ini

@@ -39,6 +39,7 @@ build_flags =
   -D INPUTDRIVER_ENCODER_BTN=0
   -D INPUTDRIVER_BUTTON_TYPE=0
   -D MAX_NUM_NODES=250
+  -D HAS_SDCARD
   -D HAS_SCREEN=0
   -D HAS_TFT=1
   -D USE_I2S_BUZZER

variants/t-deck/variant.h

@@ -42,7 +42,7 @@
 #define GPS_TX_PIN 43
 
 // Have SPI interface SD card slot
-#define HAS_SDCARD 1
+// #define HAS_SDCARD // --> needs to be in platform.ini for device-ui
 #define SPI_MOSI (41)
 #define SPI_SCK (40)
 #define SPI_MISO (38)

variants/unphone/platformio.ini

@@ -46,6 +46,7 @@ build_flags =
   -D MAX_THREADS=40
   -D HAS_SCREEN=0
   -D HAS_TFT=1
+  -D HAS_SDCARD
   -D DISPLAY_SET_RESOLUTION
   -D RAM_SIZE=3072
 	-D LV_LVGL_H_INCLUDE_SIMPLE

variants/unphone/variant.h

@@ -48,7 +48,6 @@
 #undef GPS_RX_PIN
 #undef GPS_TX_PIN
 
-#define HAS_SDCARD 1
 #define SD_SPI_FREQUENCY 25000000
 #define SDCARD_CS 43
 

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 6
-build = 0
+build = 1