protobufs

@@ -1 +1 @@
-Subproject commit b4044f8f9f3681d4d20521dbe13ee42c96eae353
+Subproject commit b4e24c3a868f9e5fd782d2e256b05456d578923b

variants/hackerboxes_esp32_io/platformio.ini

@@ -1,12 +0,0 @@
-[env:hackerboxes-esp32-io]
-extends = esp32_base
-board = esp32dev
-board_level = extra
-build_flags = 
-  ${esp32_base.build_flags}
-  -D PRIVATE_HW
-  -I variants/hackerboxes_esp32_io
-monitor_speed = 115200
-upload_protocol = esptool
-;upload_port = /dev/ttyUSB0
-upload_speed = 921600

variants/hackerboxes_esp32_io/variant.h

@@ -1,30 +0,0 @@
-#define BUTTON_PIN 0
-
-// HACKBOX LoRa IO Kit
-// Uses a ESP-32-WROOM and a RA-01SH (SX1262) LoRa Board
-
-#define LED_PIN 2      // LED
-#define LED_STATE_ON 1 // State when LED is lit
-
-#define HAS_SCREEN 0
-#define HAS_GPS 0
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
-
-#define USE_SX1262
-#define LORA_SCK 18
-#define LORA_MISO 19
-#define LORA_MOSI 23
-#define LORA_CS 5
-#define LORA_DIO0 RADIOLIB_NC
-#define LORA_RESET 27
-#define LORA_DIO1 33
-#define LORA_DIO2 RADIOLIB_NC
-#define LORA_BUSY 32
-
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY LORA_BUSY
-#define SX126X_RESET LORA_RESET
-#define SX126X_MAX_POWER 22 // Max power of the RA-01SH is 22db

variants/hackerboxes_esp32c3_oled/platformio.ini

@@ -1,14 +0,0 @@
-[env:hackerboxes-esp32c3-oled]
-extends = esp32c3_base
-board = esp32-c3-devkitm-1
-board_level = extra
-build_flags = 
-  ${esp32_base.build_flags}
-  -D PRIVATE_HW
-  -D ARDUINO_USB_MODE=1
-  -D ARDUINO_USB_CDC_ON_BOOT=1
-  -I variants/hackerboxes_esp32c3_oled
-monitor_speed = 115200
-upload_protocol = esptool
-;upload_port = /dev/ttyUSB0
-upload_speed = 921600

variants/hackerboxes_esp32c3_oled/variant.h

@@ -1,36 +0,0 @@
-#define BUTTON_PIN 9
-
-// Hackerboxes LoRa ESP32-C3 OLED Kit
-// Uses a ESP32-C3 OLED Board and a RA-01SH (SX1262) LoRa Board
-
-#define LED_PIN 8      // LED
-#define LED_STATE_ON 1 // State when LED is lit
-
-#define HAS_SCREEN 0
-#define HAS_GPS 0
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
-
-// #define USE_SSD1306_72_40
-// #define I2C_SDA 5 // I2C pins for this board
-// #define I2C_SCL 6 //
-// #define TFT_WIDTH 72
-// #define TFT_HEIGHT 40
-
-#define USE_SX1262
-#define LORA_SCK 4
-#define LORA_MISO 7
-#define LORA_MOSI 3
-#define LORA_CS 1
-#define LORA_DIO0 RADIOLIB_NC
-#define LORA_RESET 0
-#define LORA_DIO1 20
-#define LORA_DIO2 RADIOLIB_NC
-#define LORA_BUSY 10
-
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_CS LORA_CS
-#define SX126X_DIO1 LORA_DIO1
-#define SX126X_BUSY LORA_BUSY
-#define SX126X_RESET LORA_RESET
-#define SX126X_MAX_POWER 22 // Max power of the RA-01SH is 22db

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 6
-build = 3
+build = 2