Merge branch 'master' into NextHopRouter

* Added support for the LR1121 radio

Added support for the LR1121 radio, tested as functional with an E80-900M2213S from CDEbyte.

* Swap PNG for PDF

* remove PNG

* put TCXO voltage to 1.8, as in example file

It worked at 1.6v, but ¯\_(ツ)_/¯

* Hopefully this will appease Trunk

* Update rf switch pins and Schematic

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

.devcontainer/99-platformio-udev.rules

@@ -0,0 +1,183 @@
+# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#####################################################################################
+#
+# INSTALLATION
+#
+# Please visit > https://docs.platformio.org/en/latest/core/installation/udev-rules.html
+#
+#####################################################################################
+
+#
+# Boards
+#
+
+# CP210X USB UART
+ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea[67][013]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="80a9", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# FT231XS USB UART
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Prolific Technology, Inc. PL2303 Serial Port
+ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# QinHeng Electronics HL-340 USB-Serial adapter
+ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+# QinHeng Electronics CH343 USB-Serial adapter
+ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d3", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+# QinHeng Electronics CH9102 USB-Serial adapter
+ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d4", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Arduino boards
+ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][023]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Arduino SAM-BA
+ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{MTP_NO_PROBE}="1"
+
+# Digistump boards
+ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Maple with DFU
+ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="000[34]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# USBtiny
+ATTRS{idProduct}=="0c9f", ATTRS{idVendor}=="1781", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# USBasp V2.0
+ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Teensy boards
+ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666"
+KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666"
+
+# TI Stellaris Launchpad
+ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TI MSP430 Launchpad
+ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f432", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# GD32V DFU Bootloader
+ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# FireBeetle-ESP32
+ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7522", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Wio Terminal
+ATTRS{idVendor}=="2886", ATTRS{idProduct}=="[08]02d", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Raspberry Pi Pico
+ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="[01]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# AIR32F103
+ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# STM32 virtual COM port
+ATTRS{idVendor}=="0483", ATTRS{idProduct}=="5740", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+#
+# Debuggers
+#
+
+# Black Magic Probe
+SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic GDB Server", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# opendous and estick
+ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Original FT232/FT245/FT2232/FT232H/FT4232
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="60[01][104]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# DISTORTEC JTAG-lock-pick Tiny 2
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TUMPA, TUMPA Lite
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a9[89]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# XDS100v2
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE)
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TI/Luminary Stellaris Evaluation Board FTDI (several)
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd[9a]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# egnite Turtelizer 2
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Section5 ICEbear
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c14[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Amontec JTAGkey and JTAGkey-tiny
+ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TI ICDI
+ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# STLink probes
+ATTRS{idVendor}=="0483", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Hilscher NXHX Boards
+ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Hitex probes
+ATTRS{idVendor}=="0640", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Altera USB Blaster
+ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Amontec JTAGkey-HiSpeed
+ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# SEGGER J-Link
+ATTRS{idVendor}=="1366", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Raisonance RLink
+ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Debug Board for Neo1973
+ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Olimex probes
+ATTRS{idVendor}=="15ba", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# USBprog with OpenOCD firmware
+ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
+ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Marvell Sheevaplug
+ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Keil Software, Inc. ULink
+ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# CMSIS-DAP compatible adapters
+ATTRS{product}=="*CMSIS-DAP*", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Atmel AVR Dragon
+ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2107", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Espressif USB JTAG/serial debug unit
+ATTRS{idVendor}=="303a", ATTRS{idProduct}=="1001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
+
+# Zephyr framework USB CDC-ACM
+ATTRS{idVendor}=="2fe3", ATTRS{idProduct}=="0100", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"

.devcontainer/Dockerfile

@@ -1,6 +1,9 @@
 FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12
 
-# [Optional] Uncomment this section to install additional packages.
+USER root
+
+# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue
+# trunk-ignore(hadolint/DL3008): Use latest version of packages
 RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     && apt-get -y install --no-install-recommends \
     ca-certificates \
@@ -20,6 +23,16 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
     python3-wheel \
     wget \
     zip \
+    usbutils \
+    hwdata \
+    gpg \
+    gnupg2 \
     && apt-get clean && rm -rf /var/lib/apt/lists/*
 
 RUN pipx install platformio==6.1.15
+
+COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules
+
+USER vscode
+
+HEALTHCHECK NONE

.devcontainer/devcontainer.json

@@ -13,13 +13,24 @@
   },
   "customizations": {
     "vscode": {
-      "extensions": ["ms-vscode.cpptools", "platformio.platformio-ide"]
+      "extensions": [
+        "ms-vscode.cpptools",
+        "platformio.platformio-ide",
+        "Trunk.io"
+      ],
+      "unwantedRecommendations": ["ms-azuretools.vscode-docker"],
+      "settings": {
+        "extensions.ignoreRecommendations": true
+      }
     }
   },
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
   "forwardPorts": [4403],
 
+  // Use "--device=" to make a local device available inside the container.
+  // "runArgs": ["--device=/dev/ttyACM0"],
+
   // Run commands to prepare the container for use
   "postCreateCommand": ".devcontainer/setup.sh"
 }

.github/workflows/build_native.yml

@@ -56,17 +56,18 @@ jobs:
         uses: docker/login-action@v3
         continue-on-error: true # FIXME: Failing docker login auth
         with:
+          logout: true
           username: meshtastic
           password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }}
 
       - name: Docker setup
         if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        continue-on-error: true # FIXME: Failing docker login auth
+        continue-on-error: true
         uses: docker/setup-buildx-action@v3
 
       - name: Docker build and push tagged versions
         if: ${{ github.event_name == 'workflow_dispatch' }}
-        continue-on-error: true # FIXME: Failing docker login auth
+        continue-on-error: true
         uses: docker/build-push-action@v6
         with:
           context: .
@@ -76,7 +77,7 @@ jobs:
 
       - name: Docker build and push
         if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }}
-        continue-on-error: true # FIXME: Failing docker login auth
+        continue-on-error: true
         uses: docker/build-push-action@v6
         with:
           context: .

.github/workflows/main_matrix.yml

@@ -37,7 +37,7 @@ jobs:
           else  
             TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick)
           fi
-          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} Head: ${{ github.head_ref }} Ref: ${{ github.ref }} Targets: $TARGETS"
+          echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS"
           echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT
     outputs:
       esp32: ${{ steps.jsonStep.outputs.esp32 }}

.github/workflows/package_amd64.yml

@@ -47,18 +47,18 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/share/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
           mkdir -p .debpkg/etc/meshtasticd/config.d
           mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
           shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/doc/meshtasticd/web/ -r
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
+          gunzip .debpkg/usr/share/meshtasticd/web/ -r
           cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
           cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
@@ -66,6 +66,11 @@ jobs:
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
+          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
+          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
+          chmod +x .debpkg/DEBIAN/preinst
+          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
+          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:

.github/workflows/package_raspbian.yml

@@ -47,18 +47,18 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/share/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
           mkdir -p .debpkg/etc/meshtasticd/config.d
           mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
           shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/doc/meshtasticd/web/ -r
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
+          gunzip .debpkg/usr/share/meshtasticd/web/ -r
           cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
           cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
@@ -66,6 +66,11 @@ jobs:
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
+          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
+          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
+          chmod +x .debpkg/DEBIAN/preinst
+          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
+          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:

.github/workflows/package_raspbian_armv7l.yml

@@ -47,18 +47,18 @@ jobs:
       - name: build .debpkg
         run: |
           mkdir -p .debpkg/DEBIAN
-          mkdir -p .debpkg/usr/share/doc/meshtasticd/web
+          mkdir -p .debpkg/usr/share/meshtasticd/web
           mkdir -p .debpkg/usr/sbin
           mkdir -p .debpkg/etc/meshtasticd
           mkdir -p .debpkg/etc/meshtasticd/config.d
           mkdir -p .debpkg/etc/meshtasticd/available.d
           mkdir -p .debpkg/usr/lib/systemd/system/
-          tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web
+          tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web
           shopt -s dotglob nullglob
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then mv  .debpkg/usr/share/doc/meshtasticd/web/build/* .debpkg/usr/share/doc/meshtasticd/web/; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/doc/meshtasticd/web/build; fi
-          if [ -d .debpkg/usr/share/doc/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/doc/meshtasticd/web/.DS_Store; fi
-          gunzip .debpkg/usr/share/doc/meshtasticd/web/ -r
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv  .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi
+          if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi
+          gunzip .debpkg/usr/share/meshtasticd/web/ -r
           cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd
           cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml
           cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r
@@ -66,6 +66,11 @@ jobs:
           cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service
           echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles
           chmod +x .debpkg/DEBIAN/conffiles
+          # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd
+          echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst
+          chmod +x .debpkg/DEBIAN/preinst
+          echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst
+          chmod +x .debpkg/DEBIAN/postinst
 
       - uses: jiro4989/build-deb-action@v3
         with:

.github/workflows/update_protobufs.yml

@@ -17,9 +17,9 @@ jobs:
 
       - name: Download nanopb
         run: |
-          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9-linux-x86.tar.gz
-          tar xvzf nanopb-0.4.9-linux-x86.tar.gz
-          mv nanopb-0.4.9-linux-x86 nanopb-0.4.9
+          wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9.1-linux-x86.tar.gz
+          tar xvzf nanopb-0.4.9.1-linux-x86.tar.gz
+          mv nanopb-0.4.9.1-linux-x86 nanopb-0.4.9
 
       - name: Re-generate protocol buffers
         run: |

.trunk/trunk.yaml

@@ -4,31 +4,32 @@ cli:
 plugins:
   sources:
     - id: trunk
-      ref: v1.6.4
+      ref: v1.6.6
       uri: https://github.com/trunk-io/plugins
 lint:
   enabled:
-    - trufflehog@3.83.6
+    - prettier@3.4.2
+    - trufflehog@3.86.1
     - yamllint@1.35.1
-    - bandit@1.7.10
-    - checkov@3.2.287
+    - bandit@1.8.0
+    - checkov@3.2.334
     - terrascan@1.19.9
-    - trivy@0.56.2
+    - trivy@0.58.0
     #- trufflehog@3.63.2-rc0
     - taplo@0.9.3
-    - ruff@0.7.3
+    - ruff@0.8.3
     - isort@5.13.2
-    - markdownlint@0.42.0
-    - oxipng@9.1.2
+    - markdownlint@0.43.0
+    - oxipng@9.1.3
     - svgo@3.3.2
     - actionlint@1.7.4
     - flake8@7.1.1
-    - hadolint@2.12.0
+    - hadolint@2.12.1-beta
     - shfmt@3.6.0
     - shellcheck@0.10.0
     - black@24.10.0
     - git-diff-check
-    - gitleaks@8.21.1
+    - gitleaks@8.21.2
     - clang-format@16.0.3
     #- prettier@3.3.3
   ignore:
@@ -39,7 +40,7 @@ runtimes:
   enabled:
     - python@3.10.8
     - go@1.21.0
-    - node@18.12.1
+    - node@18.20.5
 actions:
   disabled:
     - trunk-announce

arch/nrf52/nrf52.ini

@@ -1,10 +1,11 @@
 [nrf52_base]
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
-platform = platformio/nordicnrf52@^10.5.0
+platform = platformio/nordicnrf52@^10.7.0
 extends = arduino_base
 platform_packages =
   ; our custom Git version until they merge our PR
   framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git
+  toolchain-gccarmnoneeabi@~1.90301.0
 
 build_type = debug
 build_flags =

bin/config-dist.yaml

@@ -155,7 +155,7 @@ Logging:
 
 Webserver:
 #  Port: 443 # Port for Webserver & Webservices
-#  RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer
+#  RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer
 
 General:
   MaxNodes: 200

bin/config.d/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml

@@ -0,0 +1,9 @@
+##  https://www.mikroe.com/lr-iot-click
+Lora:
+  Module: lr1110  # OpenWRT ONE mikroBUS with LR-IOT-CLICK
+#  CS: 25
+  IRQ: 10
+  Busy: 12
+#  Reset: 2
+  spidev: spidev2.0
+  DIO3_TCXO_VOLTAGE: 1.6

boards/t-echo.json

@@ -48,6 +48,6 @@
     "require_upload_port": true,
     "wait_for_upload_port": true
   },
-  "url": "FIXME",
-  "vendor": "TTGO"
+  "url": "https://lilygo.cc/products/t-echo-lilygo",
+  "vendor": "LILYGO"
 }

platformio.ini

@@ -16,6 +16,7 @@ default_envs = tbeam
 ;default_envs = tlora-v2
 ;default_envs = tlora-v2-1-1_6
 ;default_envs = tlora-v2-1-1_6-tcxo
+;default_envs = tlora-v3-3-0-tcxo
 ;default_envs = tlora-t3s3-v1
 ;default_envs = t-echo
 ;default_envs = canaryone

protobufs

@@ -1 +1 @@
-Subproject commit 00c9c9932ea50c14cdc44d497d2672a0031641ce
+Subproject commit 2cffaf53e3faf1b6e41a8b8f05312f2f893be413

src/main.cpp

@@ -409,13 +409,13 @@ void setup()
     digitalWrite(AQ_SET_PIN, HIGH);
 #endif
 
-#ifdef T_DECK
+#if defined(T_DECK)
     // enable keyboard
     pinMode(KB_POWERON, OUTPUT);
     digitalWrite(KB_POWERON, HIGH);
     // There needs to be a delay after power on, give LILYGO-KEYBOARD some startup time
     // otherwise keyboard and touch screen will not work
-    delay(800);
+    delay(200);
 #endif
 
     // Currently only the tbeam has a PMU
@@ -577,7 +577,6 @@ void setup()
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::INA3221, meshtastic_TelemetrySensorType_INA3221);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MAX17048, meshtastic_TelemetrySensorType_MAX17048);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MCP9808, meshtastic_TelemetrySensorType_MCP9808);
-    scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MCP9808, meshtastic_TelemetrySensorType_MCP9808);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SHT31, meshtastic_TelemetrySensorType_SHT31);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SHTC3, meshtastic_TelemetrySensorType_SHTC3);
     scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::LPS22HB, meshtastic_TelemetrySensorType_LPS22);

src/mesh/LR11x0Interface.cpp

@@ -48,8 +48,10 @@ template <typename T> bool LR11x0Interface<T>::init()
     digitalWrite(LR11X0_POWER_EN, HIGH);
 #endif
 
+#if ARCH_PORTDUINO
+    float tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
 // FIXME: correct logic to default to not using TCXO if no voltage is specified for LR11x0_DIO3_TCXO_VOLTAGE
-#if !defined(LR11X0_DIO3_TCXO_VOLTAGE)
+#elif !defined(LR11X0_DIO3_TCXO_VOLTAGE)
     float tcxoVoltage =
         0; // "TCXO reference voltage to be set on DIO3. Defaults to 1.6 V, set to 0 to skip." per
            // https://github.com/jgromes/RadioLib/blob/690a050ebb46e6097c5d00c371e961c1caa3b52e/src/modules/LR11x0/LR11x0.h#L471C26-L471C104

src/mesh/NodeDB.cpp

@@ -70,6 +70,78 @@ static unsigned char userprefs_admin_key_1[] = USERPREFS_USE_ADMIN_KEY_1;
 static unsigned char userprefs_admin_key_2[] = USERPREFS_USE_ADMIN_KEY_2;
 #endif
 
+#ifdef HELTEC_MESH_NODE_T114
+
+uint32_t read8(uint8_t bits, uint8_t dummy, uint8_t cs, uint8_t sck, uint8_t mosi, uint8_t dc, uint8_t rst)
+{
+    uint32_t ret = 0;
+    uint8_t SDAPIN = mosi;
+    pinMode(SDAPIN, INPUT_PULLUP);
+    digitalWrite(dc, HIGH);
+    for (int i = 0; i < dummy; i++) { // any dummy clocks
+        digitalWrite(sck, HIGH);
+        delay(1);
+        digitalWrite(sck, LOW);
+        delay(1);
+    }
+    for (int i = 0; i < bits; i++) { // read results
+        ret <<= 1;
+        delay(1);
+        if (digitalRead(SDAPIN))
+            ret |= 1;
+        ;
+        digitalWrite(sck, HIGH);
+        delay(1);
+        digitalWrite(sck, LOW);
+    }
+    return ret;
+}
+
+void write9(uint8_t val, uint8_t dc_val, uint8_t cs, uint8_t sck, uint8_t mosi, uint8_t dc, uint8_t rst)
+{
+    pinMode(mosi, OUTPUT);
+    digitalWrite(dc, dc_val);
+    for (int i = 0; i < 8; i++) { // send command
+        digitalWrite(mosi, (val & 0x80) != 0);
+        delay(1);
+        digitalWrite(sck, HIGH);
+        delay(1);
+        digitalWrite(sck, LOW);
+        val <<= 1;
+    }
+}
+
+uint32_t readwrite8(uint8_t cmd, uint8_t bits, uint8_t dummy, uint8_t cs, uint8_t sck, uint8_t mosi, uint8_t dc, uint8_t rst)
+{
+    digitalWrite(cs, LOW);
+    write9(cmd, 0, cs, sck, mosi, dc, rst);
+    uint32_t ret = read8(bits, dummy, cs, sck, mosi, dc, rst);
+    digitalWrite(cs, HIGH);
+    return ret;
+}
+
+uint32_t get_st7789_id(uint8_t cs, uint8_t sck, uint8_t mosi, uint8_t dc, uint8_t rst)
+{
+    pinMode(cs, OUTPUT);
+    digitalWrite(cs, HIGH);
+    pinMode(cs, OUTPUT);
+    pinMode(sck, OUTPUT);
+    pinMode(mosi, OUTPUT);
+    pinMode(dc, OUTPUT);
+    pinMode(rst, OUTPUT);
+    digitalWrite(rst, LOW); // Hardware Reset
+    delay(10);
+    digitalWrite(rst, HIGH);
+    delay(10);
+
+    uint32_t ID = 0;
+    ID = readwrite8(0x04, 24, 1, cs, sck, mosi, dc, rst);
+    ID = readwrite8(0x04, 24, 1, cs, sck, mosi, dc, rst); // ST7789 needs twice
+    return ID;
+}
+
+#endif
+
 bool meshtastic_DeviceState_callback(pb_istream_t *istream, pb_ostream_t *ostream, const pb_field_iter_t *field)
 {
     if (ostream) {
@@ -489,6 +561,12 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
 #if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) ||       \
     defined(HX8357_CS) || defined(USE_ST7789)
     bool hasScreen = true;
+#ifdef HELTEC_MESH_NODE_T114
+    uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET);
+    if (st7789_id == 0xFFFFFF) {
+        hasScreen = false;
+    }
+#endif
 #elif ARCH_PORTDUINO
     bool hasScreen = false;
     if (settingsMap[displayPanel])
@@ -541,7 +619,7 @@ void NodeDB::initConfigIntervals()
 
     config.display.screen_on_secs = default_screen_on_secs;
 
-#if defined(T_WATCH_S3) || defined(T_DECK) || defined(RAK14014)
+#if defined(T_WATCH_S3) || defined(T_DECK) || defined(MESH_TAB) || defined(RAK14014)
     config.power.is_power_saving = true;
     config.display.screen_on_secs = 30;
     config.power.wait_bluetooth_secs = 30;
@@ -774,12 +852,12 @@ void NodeDB::installDefaultDeviceState()
 #ifdef USERPREFS_CONFIG_OWNER_LONG_NAME
     snprintf(owner.long_name, sizeof(owner.long_name), USERPREFS_CONFIG_OWNER_LONG_NAME);
 #else
-    snprintf(owner.long_name, sizeof(owner.long_name), "Meshtastic %02x%02x", ourMacAddr[4], ourMacAddr[5]);
+    snprintf(owner.long_name, sizeof(owner.long_name), "Meshtastic %04x", getNodeNum() & 0x0ffff);
 #endif
 #ifdef USERPREFS_CONFIG_OWNER_SHORT_NAME
     snprintf(owner.short_name, sizeof(owner.short_name), USERPREFS_CONFIG_OWNER_SHORT_NAME);
 #else
-    snprintf(owner.short_name, sizeof(owner.short_name), "%02x%02x", ourMacAddr[4], ourMacAddr[5]);
+    snprintf(owner.short_name, sizeof(owner.short_name), "%04x", getNodeNum() & 0x0ffff);
 #endif
     snprintf(owner.id, sizeof(owner.id), "!%08x", getNodeNum()); // Default node ID now based on nodenum
     memcpy(owner.macaddr, ourMacAddr, sizeof(owner.macaddr));

src/mesh/SX126xInterface.cpp

@@ -50,9 +50,7 @@ template <typename T> bool SX126xInterface<T>::init()
 #endif
 
 #if ARCH_PORTDUINO
-    float tcxoVoltage = 0;
-    if (settingsMap[dio3_tcxo_voltage])
-        tcxoVoltage = 1.8;
+    float tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000;
     if (settingsMap[sx126x_ant_sw] != RADIOLIB_NC) {
         digitalWrite(settingsMap[sx126x_ant_sw], HIGH);
         pinMode(settingsMap[sx126x_ant_sw], OUTPUT);

src/mesh/generated/meshtastic/admin.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/admin.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/admin.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_ADMIN_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_ADMIN_PB_H_INCLUDED

src/mesh/generated/meshtastic/apponly.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/apponly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/apponly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_APPONLY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_APPONLY_PB_H_INCLUDED

src/mesh/generated/meshtastic/atak.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/atak.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/atak.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_ATAK_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_ATAK_PB_H_INCLUDED

src/mesh/generated/meshtastic/cannedmessages.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/cannedmessages.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/cannedmessages.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CANNEDMESSAGES_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CANNEDMESSAGES_PB_H_INCLUDED

src/mesh/generated/meshtastic/channel.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/channel.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/channel.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CHANNEL_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CHANNEL_PB_H_INCLUDED

src/mesh/generated/meshtastic/clientonly.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/clientonly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/clientonly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CLIENTONLY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CLIENTONLY_PB_H_INCLUDED

src/mesh/generated/meshtastic/config.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/config.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/config.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CONFIG_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CONFIG_PB_H_INCLUDED

src/mesh/generated/meshtastic/connection_status.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/connection_status.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/connection_status.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_CONNECTION_STATUS_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_CONNECTION_STATUS_PB_H_INCLUDED

src/mesh/generated/meshtastic/device_ui.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/device_ui.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/device_ui.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_DEVICE_UI_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_DEVICE_UI_PB_H_INCLUDED

src/mesh/generated/meshtastic/deviceonly.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/deviceonly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/deviceonly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_INCLUDED

src/mesh/generated/meshtastic/localonly.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/localonly.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/localonly.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_INCLUDED

src/mesh/generated/meshtastic/mesh.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/mesh.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/mesh.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_MESH_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_MESH_PB_H_INCLUDED
@@ -220,6 +220,9 @@ typedef enum _meshtastic_HardwareModel {
  the same frame format.
  Runs on linux, see https://github.com/Jorropo/routastic */
     meshtastic_HardwareModel_ROUTASTIC = 85,
+    /* Mesh-Tab, esp32 based
+ https://github.com/valzzu/Mesh-Tab */
+    meshtastic_HardwareModel_MESH_TAB = 86,
     /* ------------------------------------------------------------------------------------------------------------------------------------------
  Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits.
  ------------------------------------------------------------------------------------------------------------------------------------------ */
@@ -414,6 +417,8 @@ typedef enum _meshtastic_MeshPacket_Priority {
     meshtastic_MeshPacket_Priority_RESPONSE = 80,
     /* Higher priority for specific message types (portnums) to distinguish between other reliable packets. */
     meshtastic_MeshPacket_Priority_HIGH = 100,
+    /* Higher priority alert message used for critical alerts which take priority over other reliable packets. */
+    meshtastic_MeshPacket_Priority_ALERT = 110,
     /* Ack/naks are sent with very high priority to ensure that retransmission
  stops as soon as possible */
     meshtastic_MeshPacket_Priority_ACK = 120,

src/mesh/generated/meshtastic/module_config.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/module_config.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/module_config.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_MODULE_CONFIG_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_MODULE_CONFIG_PB_H_INCLUDED

src/mesh/generated/meshtastic/mqtt.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/mqtt.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/mqtt.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_MQTT_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_MQTT_PB_H_INCLUDED

src/mesh/generated/meshtastic/paxcount.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/paxcount.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/paxcount.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_PAXCOUNT_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_PAXCOUNT_PB_H_INCLUDED

src/mesh/generated/meshtastic/portnums.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/portnums.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/portnums.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_PORTNUMS_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_PORTNUMS_PB_H_INCLUDED
@@ -72,6 +72,8 @@ typedef enum _meshtastic_PortNum {
     /* Same as Text Message but originating from Detection Sensor Module.
  NOTE: This portnum traffic is not sent to the public MQTT starting at firmware version 2.2.9 */
     meshtastic_PortNum_DETECTION_SENSOR_APP = 10,
+    /* Same as Text Message but used for critical alerts. */
+    meshtastic_PortNum_ALERT_APP = 11,
     /* Provides a 'ping' service that replies to any packet it receives.
  Also serves as a small example module.
  ENCODING: ASCII Plaintext */

src/mesh/generated/meshtastic/powermon.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/powermon.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/powermon.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_POWERMON_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_POWERMON_PB_H_INCLUDED

src/mesh/generated/meshtastic/remote_hardware.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/remote_hardware.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/remote_hardware.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_REMOTE_HARDWARE_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_REMOTE_HARDWARE_PB_H_INCLUDED

src/mesh/generated/meshtastic/rtttl.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/rtttl.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/rtttl.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_RTTTL_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_RTTTL_PB_H_INCLUDED

src/mesh/generated/meshtastic/storeforward.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/storeforward.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/storeforward.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_STOREFORWARD_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_STOREFORWARD_PB_H_INCLUDED

src/mesh/generated/meshtastic/telemetry.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/telemetry.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/telemetry.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_TELEMETRY_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_TELEMETRY_PB_H_INCLUDED
@@ -79,7 +79,9 @@ typedef enum _meshtastic_TelemetrySensorType {
     /* SCD40/SCD41 CO2, humidity, temperature sensor */
     meshtastic_TelemetrySensorType_SCD4X = 32,
     /* ClimateGuard RadSens, radiation, Geiger-Muller Tube */
-    meshtastic_TelemetrySensorType_RADSENS = 33
+    meshtastic_TelemetrySensorType_RADSENS = 33,
+    /* High accuracy current and voltage */
+    meshtastic_TelemetrySensorType_INA226 = 34
 } meshtastic_TelemetrySensorType;
 
 /* Struct definitions */
@@ -304,8 +306,8 @@ extern "C" {
 
 /* Helper constants for enums */
 #define _meshtastic_TelemetrySensorType_MIN meshtastic_TelemetrySensorType_SENSOR_UNSET
-#define _meshtastic_TelemetrySensorType_MAX meshtastic_TelemetrySensorType_RADSENS
-#define _meshtastic_TelemetrySensorType_ARRAYSIZE ((meshtastic_TelemetrySensorType)(meshtastic_TelemetrySensorType_RADSENS+1))
+#define _meshtastic_TelemetrySensorType_MAX meshtastic_TelemetrySensorType_INA226
+#define _meshtastic_TelemetrySensorType_ARRAYSIZE ((meshtastic_TelemetrySensorType)(meshtastic_TelemetrySensorType_INA226+1))
 
 
 

src/mesh/generated/meshtastic/xmodem.pb.cpp

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb constant definitions */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #include "meshtastic/xmodem.pb.h"
 #if PB_PROTO_HEADER_VERSION != 40

src/mesh/generated/meshtastic/xmodem.pb.h

@@ -1,5 +1,5 @@
 /* Automatically generated nanopb header */
-/* Generated by nanopb-0.4.9 */
+/* Generated by nanopb-0.4.9.1 */
 
 #ifndef PB_MESHTASTIC_MESHTASTIC_XMODEM_PB_H_INCLUDED
 #define PB_MESHTASTIC_MESHTASTIC_XMODEM_PB_H_INCLUDED

src/mesh/http/ContentHandler.cpp

@@ -93,6 +93,7 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer)
     ResourceNode *nodeJsonScanNetworks = new ResourceNode("/json/scanNetworks", "GET", &handleScanNetworks);
     ResourceNode *nodeJsonBlinkLED = new ResourceNode("/json/blink", "POST", &handleBlinkLED);
     ResourceNode *nodeJsonReport = new ResourceNode("/json/report", "GET", &handleReport);
+    ResourceNode *nodeJsonNodes = new ResourceNode("/json/nodes", "GET", &handleNodes);
     ResourceNode *nodeJsonFsBrowseStatic = new ResourceNode("/json/fs/browse/static", "GET", &handleFsBrowseStatic);
     ResourceNode *nodeJsonDelete = new ResourceNode("/json/fs/delete/static", "DELETE", &handleFsDeleteStatic);
 
@@ -112,6 +113,7 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer)
     secureServer->registerNode(nodeJsonFsBrowseStatic);
     secureServer->registerNode(nodeJsonDelete);
     secureServer->registerNode(nodeJsonReport);
+    secureServer->registerNode(nodeJsonNodes);
     //    secureServer->registerNode(nodeUpdateFs);
     //    secureServer->registerNode(nodeDeleteFs);
     secureServer->registerNode(nodeAdmin);
@@ -680,6 +682,78 @@ void handleReport(HTTPRequest *req, HTTPResponse *res)
     delete value;
 }
 
+void handleNodes(HTTPRequest *req, HTTPResponse *res)
+{
+    ResourceParameters *params = req->getParams();
+    std::string content;
+
+    if (!params->getQueryParameter("content", content)) {
+        content = "json";
+    }
+
+    if (content == "json") {
+        res->setHeader("Content-Type", "application/json");
+        res->setHeader("Access-Control-Allow-Origin", "*");
+        res->setHeader("Access-Control-Allow-Methods", "GET");
+    } else {
+        res->setHeader("Content-Type", "text/html");
+        res->println("<pre>");
+    }
+
+    JSONArray nodesArray;
+
+    uint32_t readIndex = 0;
+    const meshtastic_NodeInfoLite *tempNodeInfo = nodeDB->readNextMeshNode(readIndex);
+    while (tempNodeInfo != NULL) {
+        if (tempNodeInfo->has_user) {
+            JSONObject node;
+
+            char id[16];
+            snprintf(id, sizeof(id), "!%08x", tempNodeInfo->num);
+
+            node["id"] = new JSONValue(id);
+            node["snr"] = new JSONValue(tempNodeInfo->snr);
+            node["via_mqtt"] = new JSONValue(BoolToString(tempNodeInfo->via_mqtt));
+            node["last_heard"] = new JSONValue((int)tempNodeInfo->last_heard);
+            node["position"] = new JSONValue();
+
+            if (nodeDB->hasValidPosition(tempNodeInfo)) {
+                JSONObject position;
+                position["latitude"] = new JSONValue((float)tempNodeInfo->position.latitude_i * 1e-7);
+                position["longitude"] = new JSONValue((float)tempNodeInfo->position.longitude_i * 1e-7);
+                position["altitude"] = new JSONValue((int)tempNodeInfo->position.altitude);
+                node["position"] = new JSONValue(position);
+            }
+
+            JSONObject user;
+            node["long_name"] = new JSONValue(tempNodeInfo->user.long_name);
+            node["short_name"] = new JSONValue(tempNodeInfo->user.short_name);
+            char macStr[18];
+            snprintf(macStr, sizeof(macStr), "%02X:%02X:%02X:%02X:%02X:%02X", tempNodeInfo->user.macaddr[0],
+                     tempNodeInfo->user.macaddr[1], tempNodeInfo->user.macaddr[2], tempNodeInfo->user.macaddr[3],
+                     tempNodeInfo->user.macaddr[4], tempNodeInfo->user.macaddr[5]);
+            node["mac_address"] = new JSONValue(macStr);
+            node["hw_model"] = new JSONValue(tempNodeInfo->user.hw_model);
+
+            nodesArray.push_back(new JSONValue(node));
+        }
+        tempNodeInfo = nodeDB->readNextMeshNode(readIndex);
+    }
+
+    // collect data to inner data object
+    JSONObject jsonObjInner;
+    jsonObjInner["nodes"] = new JSONValue(nodesArray);
+
+    // create json output structure
+    JSONObject jsonObjOuter;
+    jsonObjOuter["data"] = new JSONValue(jsonObjInner);
+    jsonObjOuter["status"] = new JSONValue("ok");
+    // serialize and write it to the stream
+    JSONValue *value = new JSONValue(jsonObjOuter);
+    res->print(value->Stringify().c_str());
+    delete value;
+}
+
 /*
     This supports the Apple Captive Network Assistant (CNA) Portal
 */

src/mesh/http/ContentHandler.h

@@ -13,6 +13,7 @@ void handleFsBrowseStatic(HTTPRequest *req, HTTPResponse *res);
 void handleFsDeleteStatic(HTTPRequest *req, HTTPResponse *res);
 void handleBlinkLED(HTTPRequest *req, HTTPResponse *res);
 void handleReport(HTTPRequest *req, HTTPResponse *res);
+void handleNodes(HTTPRequest *req, HTTPResponse *res);
 void handleUpdateFs(HTTPRequest *req, HTTPResponse *res);
 void handleDeleteFsContent(HTTPRequest *req, HTTPResponse *res);
 void handleFs(HTTPRequest *req, HTTPResponse *res);

src/modules/Modules.cpp

@@ -74,7 +74,7 @@
 #include "modules/StoreForwardModule.h"
 #endif
 #endif
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
 #include "modules/ExternalNotificationModule.h"
 #endif
@@ -223,7 +223,7 @@ void setupModules()
         storeForwardModule = new StoreForwardModule();
 #endif
 #endif
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
         externalNotificationModule = new ExternalNotificationModule();
 #endif

src/modules/StoreForwardModule.cpp

@@ -73,11 +73,11 @@ void StoreForwardModule::populatePSRAM()
     LOG_DEBUG("Before PSRAM init: heap %d/%d PSRAM %d/%d", memGet.getFreeHeap(), memGet.getHeapSize(), memGet.getFreePsram(),
               memGet.getPsramSize());
 
-    /* Use a maximum of 2/3 the available PSRAM unless otherwise specified.
+    /* Use a maximum of 3/4 the available PSRAM unless otherwise specified.
         Note: This needs to be done after every thing that would use PSRAM
     */
     uint32_t numberOfPackets =
-        (this->records ? this->records : (((memGet.getFreePsram() / 3) * 2) / sizeof(PacketHistoryStruct)));
+        (this->records ? this->records : (((memGet.getFreePsram() / 4) * 3) / sizeof(PacketHistoryStruct)));
     this->records = numberOfPackets;
 #if defined(ARCH_ESP32)
     this->packetHistory = static_cast<PacketHistoryStruct *>(ps_calloc(numberOfPackets, sizeof(PacketHistoryStruct)));
@@ -198,6 +198,9 @@ void StoreForwardModule::historyAdd(const meshtastic_MeshPacket &mp)
     this->packetHistory[this->packetHistoryTotalCount].to = mp.to;
     this->packetHistory[this->packetHistoryTotalCount].channel = mp.channel;
     this->packetHistory[this->packetHistoryTotalCount].from = getFrom(&mp);
+    this->packetHistory[this->packetHistoryTotalCount].id = mp.id;
+    this->packetHistory[this->packetHistoryTotalCount].reply_id = p.reply_id;
+    this->packetHistory[this->packetHistoryTotalCount].emoji = (bool)p.emoji;
     this->packetHistory[this->packetHistoryTotalCount].payload_size = p.payload.size;
     memcpy(this->packetHistory[this->packetHistoryTotalCount].payload, p.payload.bytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 
@@ -244,8 +247,11 @@ meshtastic_MeshPacket *StoreForwardModule::preparePayload(NodeNum dest, uint32_t
 
                 p->to = local ? this->packetHistory[i].to : dest; // PhoneAPI can handle original `to`
                 p->from = this->packetHistory[i].from;
+                p->id = this->packetHistory[i].id;
                 p->channel = this->packetHistory[i].channel;
+                p->decoded.reply_id = this->packetHistory[i].reply_id;
                 p->rx_time = this->packetHistory[i].time;
+                p->decoded.emoji = (uint32_t)this->packetHistory[i].emoji;
 
                 // Let's assume that if the server received the S&F request that the client is in range.
                 //   TODO: Make this configurable.

src/modules/StoreForwardModule.h

@@ -13,7 +13,10 @@ struct PacketHistoryStruct {
     uint32_t time;
     uint32_t to;
     uint32_t from;
+    uint32_t id;
     uint8_t channel;
+    uint32_t reply_id;
+    bool emoji;
     uint8_t payload[meshtastic_Constants_DATA_PAYLOAD_LEN];
     pb_size_t payload_size;
 };

src/modules/Telemetry/AirQualityTelemetry.cpp

@@ -113,12 +113,18 @@ bool AirQualityTelemetryModule::getAirQualityTelemetry(meshtastic_Telemetry *m)
 
     m->time = getTime();
     m->which_variant = meshtastic_Telemetry_air_quality_metrics_tag;
+    m->variant.air_quality_metrics.has_pm10_standard = true;
     m->variant.air_quality_metrics.pm10_standard = data.pm10_standard;
+    m->variant.air_quality_metrics.has_pm25_standard = true;
     m->variant.air_quality_metrics.pm25_standard = data.pm25_standard;
+    m->variant.air_quality_metrics.has_pm100_standard = true;
     m->variant.air_quality_metrics.pm100_standard = data.pm100_standard;
 
+    m->variant.air_quality_metrics.has_pm10_environmental = true;
     m->variant.air_quality_metrics.pm10_environmental = data.pm10_env;
+    m->variant.air_quality_metrics.has_pm25_environmental = true;
     m->variant.air_quality_metrics.pm25_environmental = data.pm25_env;
+    m->variant.air_quality_metrics.has_pm100_environmental = true;
     m->variant.air_quality_metrics.pm100_environmental = data.pm100_env;
 
     LOG_INFO("Send: PM1.0(Standard)=%i, PM2.5(Standard)=%i, PM10.0(Standard)=%i", m->variant.air_quality_metrics.pm10_standard,

src/platform/portduino/PortduinoGlue.cpp

@@ -87,7 +87,8 @@ void getMacAddr(uint8_t *dmac)
         if (strlen(optionMac) >= 12) {
             MAC_from_string(optionMac, dmac);
         } else {
-            uint32_t hwId = sscanf(optionMac, "%u", &hwId);
+            uint32_t hwId;
+            sscanf(optionMac, "%u", &hwId);
             dmac[0] = 0x80;
             dmac[1] = 0;
             dmac[2] = hwId >> 24;
@@ -365,7 +366,10 @@ bool loadConfig(const char *configPath)
                 settingsMap[use_sx1268] = true;
             }
             settingsMap[dio2_as_rf_switch] = yamlConfig["Lora"]["DIO2_AS_RF_SWITCH"].as<bool>(false);
-            settingsMap[dio3_tcxo_voltage] = yamlConfig["Lora"]["DIO3_TCXO_VOLTAGE"].as<bool>(false);
+            settingsMap[dio3_tcxo_voltage] = yamlConfig["Lora"]["DIO3_TCXO_VOLTAGE"].as<float>(0) * 1000;
+            if (settingsMap[dio3_tcxo_voltage] == 0 && yamlConfig["Lora"]["DIO3_TCXO_VOLTAGE"].as<bool>(false)) {
+                settingsMap[dio3_tcxo_voltage] = 1800; // default millivolts for "true"
+            }
             settingsMap[cs] = yamlConfig["Lora"]["CS"].as<int>(RADIOLIB_NC);
             settingsMap[irq] = yamlConfig["Lora"]["IRQ"].as<int>(RADIOLIB_NC);
             settingsMap[busy] = yamlConfig["Lora"]["Busy"].as<int>(RADIOLIB_NC);

variants/diy/nrf52_promicro_diy_tcxo/rfswitch.h

@@ -0,0 +1,17 @@
+#include "RadioLib.h"
+
+// RF Switch Matrix SubG RFO_HP_LF / RFO_LP_LF / RFI_[NP]_LF0
+// DIO5 -> RFSW0_V1
+// DIO6 -> RFSW1_V2
+// DIO7 -> ANT_CTRL_ON + ESP_IO9/LR_GPS_ANT_DC_EN -> RFI_GPS (Bias-T GPS) (LR11x0 only)
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC,
+                                             RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6  DIO7
+    {LR11x0::MODE_STBY, {LOW, LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW, LOW}},
+    {LR11x0::MODE_TX, {LOW, HIGH, LOW}},   {LR11x0::MODE_TX_HP, {LOW, HIGH, LOW}},
+    {LR11x0::MODE_TX_HF, {LOW, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, HIGH}},
+    {LR11x0::MODE_WIFI, {LOW, LOW, LOW}},  END_OF_MODE_TABLE,
+};

variants/diy/nrf52_promicro_diy_tcxo/variant.h

@@ -122,12 +122,13 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 #define USE_SX1262
 #define USE_RF95
 #define USE_SX1268
+#define USE_LR1121
 
 // RF95 CONFIG
 
-#define LORA_DIO0 (0 + 29) // P0.10 IRQ
+#define LORA_DIO0 (0 + 29) // P0.29 BUSY
 #define LORA_DIO1 (0 + 10) // P0.10 IRQ
-#define LORA_RESET (0 + 9) // P0.09
+#define LORA_RESET (0 + 9) // P0.09 NRST
 
 // RX/TX for RFM95/SX127x
 #define RF95_RXEN (0 + 17)    // P0.17
@@ -143,6 +144,19 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 #define SX126X_RXEN (0 + 17)     // P0.17
 #define SX126X_TXEN RADIOLIB_NC  // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
 
+// LR1121
+#ifdef USE_LR1121
+#define LR1121_IRQ_PIN (0 + 10)      // P0.10 IRQ
+#define LR1121_NRESET_PIN LORA_RESET // P0.09 NRST
+#define LR1121_BUSY_PIN (0 + 29)     // P0.29 BUSY
+#define LR1121_SPI_NSS_PIN LORA_CS   // P1.13
+#define LR1121_SPI_SCK_PIN LORA_SCK
+#define LR1121_SPI_MOSI_PIN LORA_MOSI
+#define LR1121_SPI_MISO_PIN LORA_MISO
+#define LR11X0_DIO3_TCXO_VOLTAGE 1.8
+#define LR11X0_DIO_AS_RF_SWITCH
+#endif
+
 // #define SX126X_MAX_POWER 8 set this if using a high-power board!
 
 /*
@@ -164,6 +178,7 @@ settings.
 | Seeed        | Wio-SX1262       | yes  | Int       | Sooooo cute!                          |
 | AI-Thinker   | RA-02            | No   | Int       | SX1278 **433mhz band only**           |
 | RF Solutions | RFM95            | No   | Int       | Untested                              |
+| Ebyte        | E80-900M2213S    | Yes  | Int       | LR1121 radio                          |
 
 */
 

variants/portduino-buildroot/platformio.ini

@@ -1,11 +1,9 @@
 [env:buildroot]
 extends = portduino_base
-; The pkg-config commands below optionally add link flags.
-; the || : is just a "or run the null command" to avoid returning an error code
+; Optional libraries should be appended to `PLATFORMIO_BUILD_FLAGS`
+; environment variable in the buildroot environment.
 build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino-buildroot
   -std=c++17
-  !pkg-config --libs libulfius --silence-errors || :
-  !pkg-config --libs openssl --silence-errors || :
 board = buildroot
 lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}

variants/rp2040-lora/variant.h

@@ -15,7 +15,7 @@
 // rxd = 9
 
 #define EXT_NOTIFY_OUT 22
-#undef BUTTON_PIN // Pin 17 used for antenna switching via DIO4
+#define BUTTON_PIN -1 // Pin 17 used for antenna switching via DIO4
 
 #define LED_PIN PIN_LED
 

variants/tlora_v2_1_16_tcxo/platformio.ini

@@ -1,5 +1,6 @@
 [env:tlora-v2-1-1_6-tcxo]
 extends = esp32_base
+board_level = extra
 board = ttgo-lora32-v21
 build_flags = 
   ${esp32_base.build_flags}

variants/tlora_v2_1_18/platformio.ini

@@ -1,5 +1,6 @@
 [env:tlora-v2-1-1_8]
 extends = esp32_base
+board_level = extra
 board = ttgo-lora32-v21
 
 build_flags = 

variants/tlora_v3_3_0_tcxo/platformio.ini

@@ -0,0 +1,11 @@
+[env:tlora-v3-3-0-tcxo]
+extends = esp32_base
+board = ttgo-lora32-v21
+board_level = extra
+build_flags = 
+  ${esp32_base.build_flags}
+  -D TLORA_V2_1_16
+  -I variants/tlora_v2_1_16
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D LORA_TCXO_GPIO=12
+  -D BUTTON_PIN=0