.trunk/trunk.yaml

@@ -16,7 +16,7 @@ lint:
     - terrascan@1.19.9
     - trivy@0.60.0
     - taplo@0.9.3
-    - ruff@0.9.10
+    - ruff@0.9.9
     - isort@6.0.1
     - markdownlint@0.44.0
     - oxipng@9.1.4

boards/esp32-s3-pico.json

@@ -7,15 +7,13 @@
     "core": "esp32",
     "extra_flags": [
       "-DARDUINO_ESP32S3_DEV",
+      "-DARDUINO_USB_MODE=1",
       "-DARDUINO_RUNNING_CORE=1",
-      "-DARDUINO_EVENT_RUNNING_CORE=1",
-      "-DARDUINO_USB_CDC_ON_BOOT=1",
-      "-DBOARD_HAS_PSRAM"
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
     ],
     "f_cpu": "240000000L",
     "f_flash": "80000000L",
     "flash_mode": "qio",
-    "psram_type": "qio",
     "hwids": [["0x303A", "0x1001"]],
     "mcu": "esp32s3",
     "variant": "esp32s3"

variants/ME25LS01-4Y10TD/platformio.ini

@@ -12,4 +12,4 @@ lib_deps =
   ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
-;upload_port = /dev/ttyACM1
+upload_port = /dev/ttyACM1

variants/ME25LS01-4Y10TD_e-ink/platformio.ini

@@ -16,4 +16,4 @@ lib_deps =
   zinggjm/GxEPD2@^1.6.2
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
-;upload_port = /dev/ttyACM1
+upload_port = /dev/ttyACM1

variants/MS24SF1/platformio.ini

@@ -12,4 +12,4 @@ lib_deps =
   ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
-;upload_port = /dev/ttyACM1
+upload_port = /dev/ttyACM1