Merge 291643fa3b into bd3cbfc1ad

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

.trunk/trunk.yaml

@@ -9,14 +9,14 @@ plugins:
 lint:
   enabled:
     - checkov@3.2.467
-    - renovate@41.88.0
+    - renovate@41.90.1
     - prettier@3.6.2
     - trufflehog@3.90.5
     - yamllint@1.37.1
     - bandit@1.8.6
     - trivy@0.65.0
     - taplo@0.10.0
-    - ruff@0.12.10
+    - ruff@0.12.11
     - isort@6.0.1
     - markdownlint@0.45.0
     - oxipng@9.1.5

bin/device-install.bat

@@ -100,7 +100,6 @@ IF NOT "!FILENAME:update=!"=="!FILENAME!" (
 )
 
 :skip-filename
-SET "ESPTOOL_BAUD=1200"
 
 CALL :LOG_MESSAGE DEBUG "Determine the correct esptool command to use..."
 IF NOT "__%PYTHON%__"=="____" (
@@ -142,7 +141,7 @@ CALL :LOG_MESSAGE INFO "Using esptool baud: !ESPTOOL_BAUD!."
 
 IF %BPS_RESET% EQU 1 (
     @REM Attempt to change mode via 1200bps Reset.
-    CALL :RUN_ESPTOOL !ESPTOOL_BAUD! --after no_reset read_flash_status
+    CALL :RUN_ESPTOOL 1200 --after no_reset read_flash_status
     GOTO eof
 )
 

bin/org.meshtastic.meshtasticd.metainfo.xml

@@ -87,6 +87,9 @@
   </screenshots>
 
   <releases>
+    <release version="2.7.8" date="2025-08-30">
+      <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.8</url>
+    </release>
     <release version="2.7.7" date="2025-08-28">
       <url type="details">https://github.com/meshtastic/firmware/releases?q=tag%3Av2.7.7</url>
     </release>

debian/changelog

@@ -1,4 +1,4 @@
-meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
+meshtasticd (2.7.8.0) UNRELEASED; urgency=medium
 
   [ Austin Lane ]
   * Initial packaging
@@ -41,4 +41,7 @@ meshtasticd (2.7.7.0) UNRELEASED; urgency=medium
   * GitHub Actions Automatic version bump
   * GitHub Actions Automatic version bump
 
- -- Ubuntu <github-actions[bot]@users.noreply.github.com>  Thu, 28 Aug 2025 10:33:25 +0000
+  [  ]
+  * GitHub Actions Automatic version bump
+
+ --  <github-actions[bot]@users.noreply.github.com>  Sat, 30 Aug 2025 00:26:04 +0000

src/Power.cpp

@@ -128,6 +128,7 @@ RAK9154Sensor rak9154Sensor;
 #ifdef HAS_PPM
 // note: XPOWERS_CHIP_XXX must be defined in variant.h
 #include <XPowersLib.h>
+XPowersPPM *PPM = NULL;
 #endif
 
 #ifdef HAS_BQ27220
@@ -681,7 +682,7 @@ bool Power::setup()
         found = true;
     } else if (lipoChargerInit()) {
         found = true;
-    }  else if (meshSolarInit()) {
+    } else if (meshSolarInit()) {
         found = true;
     } else if (analogInit()) {
         found = true;
@@ -745,7 +746,11 @@ void Power::shutdown()
 
 #if HAS_SCREEN
     if (screen) {
+#ifdef T_DECK_PRO
+        screen->showSimpleBanner("Device is powered off.\nConnect USB to start!", 0); // T-Deck Pro has no power button
+#else
         screen->showSimpleBanner("Shutting Down...", 0); // stays on screen
+#endif
     }
 #endif
 #if !defined(ARCH_STM32WL)
@@ -763,7 +768,7 @@ void Power::shutdown()
 #ifdef PIN_LED3
     ledOff(PIN_LED3);
 #endif
-    doDeepSleep(DELAY_FOREVER, false, true);
+    doDeepSleep(DELAY_FOREVER, true, true);
 #elif defined(ARCH_PORTDUINO)
     exit(EXIT_SUCCESS);
 #else
@@ -1320,7 +1325,6 @@ bool Power::lipoInit()
 class LipoCharger : public HasBatteryLevel
 {
   private:
-    XPowersPPM *ppm = nullptr;
     BQ27220 *bq = nullptr;
 
   public:
@@ -1329,41 +1333,41 @@ class LipoCharger : public HasBatteryLevel
      */
     bool runOnce()
     {
-        if (ppm == nullptr) {
-            ppm = new XPowersPPM;
-            bool result = ppm->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
+        if (PPM == nullptr) {
+            PPM = new XPowersPPM;
+            bool result = PPM->init(Wire, I2C_SDA, I2C_SCL, BQ25896_ADDR);
             if (result) {
                 LOG_INFO("PPM BQ25896 init succeeded");
                 // Set the minimum operating voltage. Below this voltage, the PPM will protect
-                // ppm->setSysPowerDownVoltage(3100);
+                // PPM->setSysPowerDownVoltage(3100);
 
                 // Set input current limit, default is 500mA
-                // ppm->setInputCurrentLimit(800);
+                // PPM->setInputCurrentLimit(800);
 
                 // Disable current limit pin
-                // ppm->disableCurrentLimitPin();
+                // PPM->disableCurrentLimitPin();
 
                 // Set the charging target voltage, Range:3840 ~ 4608mV ,step:16 mV
-                ppm->setChargeTargetVoltage(4288);
+                PPM->setChargeTargetVoltage(4288);
 
                 // Set the precharge current , Range: 64mA ~ 1024mA ,step:64mA
-                // ppm->setPrechargeCurr(64);
+                // PPM->setPrechargeCurr(64);
 
                 // The premise is that limit pin is disabled, or it will
                 // only follow the maximum charging current set by limit pin.
                 // Set the charging current , Range:0~5056mA ,step:64mA
-                ppm->setChargerConstantCurr(1024);
+                PPM->setChargerConstantCurr(1024);
 
                 // To obtain voltage data, the ADC must be enabled first
-                ppm->enableMeasure();
+                PPM->enableMeasure();
 
                 // Turn on charging function
                 // If there is no battery connected, do not turn on the charging function
-                ppm->enableCharge();
+                PPM->enableCharge();
             } else {
                 LOG_WARN("PPM BQ25896 init failed");
-                delete ppm;
-                ppm = nullptr;
+                delete PPM;
+                PPM = nullptr;
                 return false;
             }
         }
@@ -1404,23 +1408,23 @@ class LipoCharger : public HasBatteryLevel
     /**
      * return true if there is a battery installed in this unit
      */
-    virtual bool isBatteryConnect() override { return ppm->getBattVoltage() > 0; }
+    virtual bool isBatteryConnect() override { return PPM->getBattVoltage() > 0; }
 
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return ppm->getVbusVoltage() > 0; }
+    virtual bool isVbusIn() override { return PPM->getVbusVoltage() > 0; }
 
     /**
      * return true if the battery is currently charging
      */
     virtual bool isCharging() override
     {
-        bool isCharging = ppm->isCharging();
+        bool isCharging = PPM->isCharging();
         if (isCharging) {
             LOG_DEBUG("BQ27220 time to full charge: %d min", bq->getTimeToFull());
         } else {
-            if (!ppm->isVbusIn()) {
+            if (!PPM->isVbusIn()) {
                 LOG_DEBUG("BQ27220 time to empty: %d min (%d mAh)", bq->getTimeToEmpty(), bq->getRemainingCapacity());
             }
         }
@@ -1453,8 +1457,6 @@ bool Power::lipoChargerInit()
 }
 #endif
 
-
-
 #ifdef HELTEC_MESH_SOLAR
 #include "meshSolarApp.h"
 
@@ -1492,7 +1494,7 @@ class meshSolarBatteryLevel : public HasBatteryLevel
     /**
      * return true if there is an external power source detected
      */
-    virtual bool isVbusIn() override { return meshSolarIsVbusIn();}
+    virtual bool isVbusIn() override { return meshSolarIsVbusIn(); }
 
     /**
      * return true if the battery is currently charging

src/configuration.h

@@ -26,10 +26,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include <Arduino.h>
 
-#ifdef RV3028_RTC
+#if __has_include("Melopero_RV3028.h")
 #include "Melopero_RV3028.h"
 #endif
-#ifdef PCF8563_RTC
+#if __has_include("pcf8563.h")
 #include "pcf8563.h"
 #endif
 

src/gps/RTC.cpp

@@ -55,9 +55,9 @@ RTCSetResult readFromRTC()
 
         LOG_DEBUG("Read RTC time from RV3028 getTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
-        timeStartMsec = now;
-        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
+            timeStartMsec = now;
+            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;
@@ -94,9 +94,9 @@ RTCSetResult readFromRTC()
 
         LOG_DEBUG("Read RTC time from PCF8563 getDateTime as %02d-%02d-%02d %02d:%02d:%02d (%ld)", t.tm_year + 1900, t.tm_mon + 1,
                   t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec, printableEpoch);
-        timeStartMsec = now;
-        zeroOffsetSecs = tv.tv_sec;
         if (currentQuality == RTCQualityNone) {
+            timeStartMsec = now;
+            zeroOffsetSecs = tv.tv_sec;
             currentQuality = RTCQualityDevice;
         }
         return RTCSetResultSuccess;

src/graphics/TFTDisplay.cpp

@@ -431,6 +431,8 @@ class LGFX : public lgfx::LGFX_Device
 #if HAS_TOUCHSCREEN
 #if defined(T_WATCH_S3) || defined(ELECROW)
     lgfx::Touch_FT5x06 _touch_instance;
+#elif defined(TOUCH_CS)
+    lgfx::Touch_XPT2046 _touch_instance;
 #else
     lgfx::Touch_GT911 _touch_instance;
 #endif
@@ -494,8 +496,17 @@ class LGFX : public lgfx::LGFX_Device
 #endif
             cfg.dummy_read_bits = 1;                      // Number of bits for dummy read before non-pixel data read
             cfg.readable = true;                          // Set to true if data can be read
+#ifndef TFT_INVERSION_OFF
             cfg.invert = true;                            // Set to true if the light/darkness of the panel is reversed
+#else
+            cfg.invert = false;
+#endif
+
+#if !defined(TFT_RGB_ORDER) || (TFT_RGB_ORDER == TFT_BGR)
             cfg.rgb_order = false;                        // Set to true if the panel's red and blue are swapped
+#else
+            cfg.rgb_order = true;
+#endif
             cfg.dlen_16bit =
                 false;             // Set to true for panels that transmit data length in 16-bit units with 16-bit parallel or SPI
             cfg.bus_shared = true; // If the bus is shared with the SD card, set to true (bus control with drawJpgFile etc.)
@@ -522,6 +533,7 @@ class LGFX : public lgfx::LGFX_Device
 #endif
 
 #if HAS_TOUCHSCREEN
+#if !defined(TOUCH_CS)
         // Configure settings for touch screen control.
         {
             auto cfg = _touch_instance.config();
@@ -554,6 +566,30 @@ class LGFX : public lgfx::LGFX_Device
             _touch_instance.config(cfg);
             _panel_instance.setTouch(&_touch_instance);
         }
+#else // if defined(TOUCH_CS)
+        {
+            // Configure settings for touch control.
+            auto touch_cfg = _touch_instance.config();
+
+            touch_cfg.x_min = TFT_TOUCH_X_MIN;
+            touch_cfg.x_max = TFT_TOUCH_X_MAX;
+            touch_cfg.y_min = TFT_TOUCH_Y_MIN;
+            touch_cfg.y_max = TFT_TOUCH_Y_MAX;
+            touch_cfg.pin_int = -1;
+            touch_cfg.bus_shared = true;
+            touch_cfg.offset_rotation = TFT_TOUCH_OFFSET_ROTATION;
+            // SPI configuration
+            touch_cfg.spi_host = ST7789_SPI_HOST;
+            touch_cfg.freq = SPI_TOUCH_FREQUENCY;
+            touch_cfg.pin_sclk = ST7789_SCK;
+            touch_cfg.pin_mosi = ST7789_SDA;
+            touch_cfg.pin_miso = ST7789_MISO;
+            touch_cfg.pin_cs = TOUCH_CS;
+
+            _touch_instance.config(touch_cfg);
+            _panel_instance.setTouch(&_touch_instance);
+        }
+#endif
 #endif
 
         setPanel(&_panel_instance); // Sets the panel to use.

src/main.cpp

@@ -419,7 +419,7 @@ void setup()
     struct timeval tv;
     tv.tv_sec = time(NULL);
     tv.tv_usec = 0;
-    perhapsSetRTC(RTCQualityNTP, &tv);
+    perhapsSetRTC(RTCQualityDevice, &tv);
 #endif
 
     powerMonInit();

src/sleep.cpp

@@ -32,6 +32,16 @@ esp_sleep_source_t wakeCause; // the reason we booted this time
 #endif
 #include "Throttle.h"
 
+#ifdef USE_XL9555
+#include "ExtensionIOXL9555.hpp"
+extern ExtensionIOXL9555 io;
+#endif
+
+#ifdef HAS_PPM
+#include <XPowersLib.h>
+extern XPowersPPM *PPM;
+#endif
+
 #ifndef INCLUDE_vTaskSuspend
 #define INCLUDE_vTaskSuspend 0
 #endif
@@ -297,6 +307,14 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveN
 #endif
 #endif
 
+#ifdef HAS_PPM
+    if (PPM) {
+        LOG_INFO("PMM shutdown");
+        console->flush();
+        PPM->shutdown();
+    }
+#endif
+
 #ifdef HAS_PMU
     if (pmu_found && PMU) {
         // Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
@@ -412,6 +430,16 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     if (pmu_found)
         gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
 #endif
+
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power down XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, LOW);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.digitalWrite(EXPANDS_KB_EN, LOW);
+    io.digitalWrite(EXPANDS_SD_EN, LOW);
+    io.digitalWrite(EXPANDS_GPIO_EN, LOW);
+#endif
+
     auto res = esp_sleep_enable_gpio_wakeup();
     if (res != ESP_OK) {
         LOG_ERROR("esp_sleep_enable_gpio_wakeup result %d", res);
@@ -452,6 +480,14 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
         gpio_wakeup_disable((gpio_num_t)RF95_IRQ);
     }
 #endif
+#ifdef T_LORA_PAGER
+    LOG_DEBUG("power up XL9555 io");
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.digitalWrite(EXPANDS_AMP_EN, HIGH);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+#endif
 
     esp_sleep_wakeup_cause_t cause = esp_sleep_get_wakeup_cause();
     notifyLightSleepEnd.notifyObservers(cause); // Button interrupts are reattached here

variants/native/portduino/platformio.ini

@@ -3,7 +3,10 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -I variants/native/portduino
   -I /usr/include
 board = cross_platform
-lib_deps = ${portduino_base.lib_deps}
+lib_deps = 
+  ${portduino_base.lib_deps}
+  melopero/Melopero RV3028@^1.1.0
+
 build_src_filter = ${portduino_base.build_src_filter}
 
 [env:native]

variants/native/portduino/variant.h

@@ -4,4 +4,7 @@
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE settingsMap[maxtophone]
-#define MAX_NUM_NODES settingsMap[maxnodes]
+#define MAX_NUM_NODES settingsMap[maxnodes]
+
+// RAK12002 RTC Module
+#define RV3028_RTC (uint8_t)0b1010010

variants/nrf52840/heltec_mesh_node_t114/variant.h

@@ -208,7 +208,7 @@ No longer populated on PCB
 #undef AREF_VOLTAGE
 #define AREF_VOLTAGE 3.0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
-#define ADC_MULTIPLIER (4.90F)
+#define ADC_MULTIPLIER (4.99F)
 
 #define HAS_RTC 0
 #ifdef __cplusplus

version.properties

@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 7
-build = 7
+build = 8