// #define LED_PIN 18

// Enable bus for external periherals
#define I2C_SDA 1
#define I2C_SCL 2
#define USE_ST7789

#define ST7789_NSS 39
// #define ST7789_CS 39
#define ST7789_RS 47  // DC
#define ST7789_SDA 48 // MOSI
#define ST7789_SCK 38
#define ST7789_RESET 40
#define ST7789_MISO 4
#define ST7789_BUSY -1
#define VTFT_CTRL 7
// #define TFT_BL 3
#define VTFT_LEDA 17
#define TFT_BACKLIGHT_ON HIGH
// #define TFT_BL 17
// #define TFT_BACKLIGHT_ON HIGH
// #define ST7789_BL 3
#define ST7789_SPI_HOST SPI2_HOST
// #define ST7789_BACKLIGHT_EN 17
#define SPI_FREQUENCY 10000000
#define SPI_READ_FREQUENCY 10000000
#define TFT_HEIGHT 170
#define TFT_WIDTH 320
#define TFT_OFFSET_X 0
#define TFT_OFFSET_Y 0
// #define TFT_OFFSET_ROTATION 0
// #define SCREEN_ROTATE
// #define SCREEN_TRANSITION_FRAMERATE 5
#define BRIGHTNESS_DEFAULT 100 // Medium Low Brightnes


// #define SLEEP_TIME 120


/*
 * SPI interfaces
 */
#define SPI_INTERFACES_COUNT 2

#define PIN_SPI_MISO 10 // MISO      P0.17
#define PIN_SPI_MOSI 11 // MOSI      P0.15
#define PIN_SPI_SCK 9   // SCK       P0.13

// #define VEXT_ENABLE 7 // active low, powers the oled display and the lora antenna boost
#define BUTTON_PIN 0

#define ADC_CTRL 46
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN 6
#define ADC_CHANNEL ADC1_GPIO6_CHANNEL
#define ADC_MULTIPLIER 4.9*1.03                // Voltage divider is roughly 1:1
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // Voltage divider output is quite high

#define USE_SX1262

#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled

#define LORA_SCK 9
#define LORA_MISO 11
#define LORA_MOSI 10
#define LORA_CS 8

#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET

#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8