/* TTGO T-BEAM Tracker for The Things Network Copyright (C) 2018 by Xose Pérez This code requires LMIC library by Matthijs Kooijman https://github.com/matthijskooijman/arduino-lmic This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #pragma once #include #ifdef RV3028_RTC #include "Melopero_RV3028.h" #endif #ifdef PCF8563_RTC #include "pcf8563.h" #endif // ----------------------------------------------------------------------------- // Version // ----------------------------------------------------------------------------- // If app version is not specified we assume we are not being invoked by the build script #ifndef APP_VERSION #error APP_VERSION must be set by the build environment #endif // FIXME: This is still needed by the Bluetooth Stack and needs to be replaced by something better. Remnant of the old versioning system. #ifndef HW_VERSION #define HW_VERSION "1.0" #endif // ----------------------------------------------------------------------------- // Configuration // ----------------------------------------------------------------------------- // If we are using the JTAG port for debugging, some pins must be left free for that (and things like GPS have to be disabled) // we don't support jtag on the ttgo - access to gpio 12 is a PITA #define REQUIRE_RADIO true // If true, we will fail to start if the radio is not found /// Convert a preprocessor name into a quoted string #define xstr(s) str(s) #define str(s) #s /// Convert a preprocessor name into a quoted string and if that string is empty use "unset" #define optstr(s) (xstr(s)[0] ? xstr(s) : "unset") #ifdef PORTDUINO #define NO_ESP32 // Don't use ESP32 libs (mainly bluetooth) #elif defined(NRF52_SERIES) // All of the NRF52 targets are configured using variant.h, so this section shouldn't need to be // board specific // // Standard definitions for NRF52 targets // #define NO_ESP32 // Don't use ESP32 libs (mainly bluetooth) // We bind to the GPS using variant.h instead for this platform (Serial1) #define LED_PIN PIN_LED1 // LED1 on nrf52840-DK // If the variant filed defines as standard button #ifdef PIN_BUTTON1 #define BUTTON_PIN PIN_BUTTON1 #endif #ifdef PIN_BUTTON2 #define BUTTON_PIN_ALT PIN_BUTTON2 #endif #ifdef PIN_BUTTON_TOUCH #define BUTTON_PIN_TOUCH PIN_BUTTON_TOUCH #endif #else // // Standard definitions for ESP32 targets // #define HAS_WIFI #define GPS_SERIAL_NUM 1 #define GPS_RX_PIN 34 #ifdef USE_JTAG #define GPS_TX_PIN -1 #else #define GPS_TX_PIN 12 #endif // ----------------------------------------------------------------------------- // LoRa SPI // ----------------------------------------------------------------------------- // NRF52 boards will define this in variant.h #ifndef RF95_SCK #define RF95_SCK 5 #define RF95_MISO 19 #define RF95_MOSI 27 #define RF95_NSS 18 #endif #endif #ifndef TTGO_T_ECHO #define GPS_UBLOX #endif // // Standard definitions for !ESP32 targets // #ifdef NO_ESP32 // Nop definition for these attributes - not used on NRF52 #define EXT_RAM_ATTR #define IRAM_ATTR #define RTC_DATA_ATTR #endif // ----------------------------------------------------------------------------- // Feature toggles // ----------------------------------------------------------------------------- // Disable use of the NTP library and related features // #define DISABLE_NTP // Disable the welcome screen and allow #define DISABLE_WELCOME_UNSET // ----------------------------------------------------------------------------- // OLED & Input // ----------------------------------------------------------------------------- #define SSD1306_ADDRESS 0x3C #define ST7567_ADDRESS 0x3F // The SH1106 controller is almost, but not quite, the same as SSD1306 // Define this if you know you have that controller or your "SSD1306" misbehaves. //#define USE_SH1106 // Flip the screen upside down by default as it makes more sense on T-BEAM // devices. Comment this out to not rotate screen 180 degrees. #define SCREEN_FLIP_VERTICALLY // Define if screen should be mirrored left to right // #define SCREEN_MIRROR // The m5stack I2C Keyboard (also RAK14004) #define CARDKB_ADDR 0x5F // The older M5 Faces I2C Keyboard #define FACESKB_ADDR 0x88 // ----------------------------------------------------------------------------- // SENSOR // ----------------------------------------------------------------------------- #define BME_ADDR 0x76 #define BME_ADDR_ALTERNATE 0x77 #define MCP9808_ADDR 0x18 #define INA_ADDR 0x40 #define INA_ADDR_ALTERNATE 0x41 // ----------------------------------------------------------------------------- // GPS // ----------------------------------------------------------------------------- #define GPS_BAUDRATE 9600 #ifndef GPS_THREAD_INTERVAL #define GPS_THREAD_INTERVAL 100 #endif #if defined(TBEAM_V10) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_TBEAM #elif defined(TBEAM_V07) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_TBEAM0p7 #elif defined(DIY_V1) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_DIY_V1 #elif defined(RAK_11200) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_RAK11200 #elif defined(ARDUINO_HELTEC_WIFI_LORA_32_V2) #ifdef HELTEC_V2_0 // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_HELTEC_V2_0 #endif #ifdef HELTEC_V2_1 // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_HELTEC_V2_1 #endif #elif defined(ARDUINO_HELTEC_WIFI_LORA_32) #define HW_VENDOR HardwareModel_HELTEC_V1 #elif defined(TLORA_V1) #define HW_VENDOR HardwareModel_TLORA_V1 #elif defined(TLORA_V2) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_TLORA_V2 #elif defined(TLORA_V1_3) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_TLORA_V1_1p3 #elif defined(TLORA_V2_1_16) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_TLORA_V2_1_1p6 #elif defined(GENIEBLOCKS) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_GENIEBLOCKS #elif defined(PRIVATE_HW) // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_PRIVATE_HW #endif #ifdef ARDUINO_NRF52840_PCA10056 // This string must exactly match the case used in release file names or the android updater won't work #define HW_VENDOR HardwareModel_NRF52840DK // This board uses 0 to be mean LED on #undef LED_INVERTED #define LED_INVERTED 1 #elif defined(ARDUINO_NRF52840_PPR) #define HW_VENDOR HardwareModel_PPR #elif defined(RAK4630) #define HW_VENDOR HardwareModel_RAK4631 #elif defined(TTGO_T_ECHO) #define HW_VENDOR HardwareModel_T_ECHO #elif defined(NANO_G1) #define HW_VENDOR HardwareModel_NANO_G1 #elif defined(NORDIC_PCA10059) #define HW_VENDOR HardwareModel_NRF52840_PCA10059 #elif defined(M5STACK) #define HW_VENDOR HardwareModel_M5STACK #elif NRF52_SERIES #define HW_VENDOR HardwareModel_NRF52_UNKNOWN #elif PORTDUINO #define HW_VENDOR HardwareModel_PORTDUINO #endif #include "variant.h" #include "RF95Configuration.h" #include "DebugConfiguration.h"