; Common settings for ESP targes, mixin with extends = esp32_base [esp32_base] extends = arduino_base custom_esp32_kind = esp32 platform = # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32 platformio/espressif32@6.10.0 build_src_filter = ${arduino_base.build_src_filter} - - - - - upload_speed = 921600 debug_init_break = tbreak setup monitor_filters = esp32_exception_decoder board_build.filesystem = littlefs # Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging. # See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h # This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h build_unflags = -fno-lto build_flags = ${arduino_base.build_flags} -flto -Wall -Wextra -Isrc/platform/esp32 -std=c++11 -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL -DAXP_DEBUG_PORT=Serial -DCONFIG_BT_NIMBLE_ENABLED -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2 -DCONFIG_BT_NIMBLE_MAX_CCCDS=20 -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192 -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING -DSERIAL_BUFFER_SIZE=4096 -DLIBPAX_ARDUINO -DLIBPAX_WIFI -DLIBPAX_BLE -DHAS_UDP_MULTICAST=1 ;-DDEBUG_HEAP lib_deps = ${arduino_base.lib_deps} ${networking_base.lib_deps} ${environmental_base.lib_deps} ${radiolib_base.lib_deps} # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master https://github.com/meshtastic/esp32_https_server/archive/896f1771ceb5979987a0b41028bf1b4e7aad419b.zip # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino h2zero/NimBLE-Arduino@^1.4.3 # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib lewisxhe/XPowersLib@^0.2.7 # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto rweather/Crypto@^0.4.0 lib_ignore = segger_rtt ESP32 BLE Arduino ; leave this commented out to avoid breaking Windows ;upload_port = /dev/ttyUSB0 ;monitor_port = /dev/ttyUSB0 ; Please don't delete these lines. JM uses them. ;upload_port = /dev/cu.SLAB_USBtoUART ;monitor_port = /dev/cu.SLAB_USBtoUART ; customize the partition table ; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables board_build.partitions = partition-table.csv