#define EXT_PWR_DETECT 20 #define BUTTON_PIN 17 #define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage #define ADC_CHANNEL ADC1_GPIO7_CHANNEL #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider #define ADC_MULTIPLIER (4.9 * 1.045) #define ADC_CTRL 34 // active HIGH, powers the voltage divider. Only on 1.1 #define ADC_CTRL_ENABLED HIGH #define HAS_NEOPIXEL // Enable the use of neopixels #define NEOPIXEL_COUNT 1 // How many neopixels are connected #define NEOPIXEL_DATA 18 // gpio pin used to send data to the neopixels #define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use #define USE_SX1262 #define LORA_DIO0 RADIOLIB_NC #define LORA_RESET 12 #define LORA_DIO1 14 // SX1262 IRQ #define LORA_DIO2 13 // SX1262 BUSY #define LORA_SCK 9 #define LORA_MISO 11 #define LORA_MOSI 10 #define LORA_CS 8 #define SX126X_CS LORA_CS #define SX126X_DIO1 LORA_DIO1 #define SX126X_BUSY LORA_DIO2 #define SX126X_RESET LORA_RESET #define SX126X_DIO2_AS_RF_SWITCH #define SX126X_DIO3_TCXO_VOLTAGE 1.8 #define I2C_SDA 1 #define I2C_SCL 2 #define HAS_SCREEN 0 #define SENSOR_POWER_CTRL_PIN 33 #define SENSOR_POWER_ON 1 #define PERIPHERAL_WARMUP_MS 100 #define ESP32S3_WAKE_TYPE ESP_EXT1_WAKEUP_ANY_HIGH #define ENVIRONMENTAL_TELEMETRY_MODULE_ENABLE 1