; Meshtastic DIY v1 by Nano VHF Schematic based on ESP32-WROOM-32 (38 pins) devkit & EBYTE E22 SX1262/SX1268 module
[env:meshtastic-diy-v1]
extends = esp32_base
board = esp32doit-devkit-v1
board_check = true
build_flags =
  ${esp32_base.build_flags}
  -D DIY_V1
  -D EBYTE_E22
  -I variants/diy/v1

; Meshtastic DIY v1.1 new schematic based on ESP32-WROOM-32 & SX1262/SX1268 modules
[env:meshtastic-diy-v1_1]
extends = esp32_base
board = esp32doit-devkit-v1
board_level = extra
build_flags =
  ${esp32_base.build_flags}
  -D DIY_V1
  -D EBYTE_E22
  -I variants/diy/v1_1

; Port to Disaster Radio's ESP32-v3 Dev Board
[env:meshtastic-dr-dev]
extends = esp32_base
board = esp32doit-devkit-v1
board_upload.maximum_size = 4194304
board_upload.maximum_ram_size = 532480
build_flags =
  ${esp32_base.build_flags}
  -D DR_DEV
  -D EBYTE_E22
  -I variants/diy/dr-dev

; Hydra - Meshtastic DIY v1 hardware with some specific changes
[env:hydra]
extends = esp32_base
board = esp32doit-devkit-v1
build_flags =
  ${esp32_base.build_flags}
  -D DIY_V1
  -I variants/diy/hydra


; Promicro + E22(0)-xxxMM / RA-01SH modules board variant - DIY - without TCXO
[env:nrf52_promicro_diy_xtal]
extends = nrf52840_base
board = promicro-nrf52840
board_level = extra
build_flags = ${nrf52840_base.build_flags}
  -I variants/diy/nrf52_promicro_diy_xtal
  -D NRF52_PROMICRO_DIY
  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_xtal>
lib_deps = 
  ${nrf52840_base.lib_deps}
debug_tool = jlink


; Promicro + E22(0)-xxxM / HT-RA62 modules board variant - DIY - with TCXO
[env:nrf52_promicro_diy_tcxo]
extends = nrf52840_base
board = promicro-nrf52840
build_flags = ${nrf52840_base.build_flags}
  -I variants/diy/nrf52_promicro_diy_tcxo
  -D NRF52_PROMICRO_DIY
  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_tcxo>
lib_deps = 
  ${nrf52840_base.lib_deps}
debug_tool = jlink

; NanoVHF T-Energy-S3 + E22(0)-xxxM - DIY
[env:t-energy-s3_e22]
extends = esp32s3_base
board = esp32-s3-devkitc-1
board_level = extra
board_upload.flash_size = 16MB ;Specify the FLASH capacity as 16MB
board_build.arduino.memory_type = qio_opi ;Enable internal PSRAM
build_unflags =
  ${esp32s3_base.build_unflags}
  -D ARDUINO_USB_MODE=1
build_flags =
  ${esp32s3_base.build_flags}
  -D EBYTE_ESP32_S3
  -D BOARD_HAS_PSRAM
  -D ARDUINO_USB_MODE=0
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -I variants/diy/t-energy-s3_e22

; esp32-s3 + ra-sh01 lora + 3.2" ILI9143
[env:mesh-tab]
extends = esp32s3_base
board = um_feathers3
board_level = extra
board_upload.flash_size = 16MB
board_build.partitions = default_16MB.csv
upload_protocol = esptool
build_flags = ${esp32s3_base.build_flags}
  -D MESH_TAB
  -D PRIVATE_HW
  -D CONFIG_ARDUHAL_ESP_LOG
  -D CONFIG_ARDUHAL_LOG_COLORS=1
  -D CONFIG_DISABLE_HAL_LOCKS=1 ; "feels" to be a bit more stable without locks
  -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
  -D MESHTASTIC_EXCLUDE_INPUTBROKER=1
  -D MESHTASTIC_EXCLUDE_BLUETOOTH=1
  -D MESHTASTIC_EXCLUDE_WEBSERVER=1
  -D LV_LVGL_H_INCLUDE_SIMPLE
  -D LV_CONF_INCLUDE_SIMPLE
  -D LV_COMP_CONF_INCLUDE_SIMPLE
  -D LV_USE_SYSMON=0
  -D LV_USE_PROFILER=0
  -D LV_USE_PERF_MONITOR=0
  -D LV_USE_MEM_MONITOR=0
  -D LV_USE_LOG=0
  -D LV_BUILD_TEST=0
  -D USE_LOG_DEBUG
  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
  -D RADIOLIB_SPI_PARANOID=0
  -D MAX_NUM_NODES=250
  -D MAX_THREADS=40
  -D HAS_SCREEN=0
  -D HAS_TFT=1
  -D RAM_SIZE=1024
  -D LGFX_DRIVER_TEMPLATE
  -D LGFX_DRIVER=LGFX_GENERIC
  -D LGFX_PANEL=ILI9341
  -D LGFX_OFFSET_ROTATION=1
  -D LGFX_TOUCH=XPT2046
  -D LGFX_PIN_SCK=12
  -D LGFX_PIN_MOSI=13
  -D LGFX_PIN_MISO=11
  -D LGFX_PIN_DC=16
  -D LGFX_PIN_CS=10
  -D LGFX_PIN_RST=-1
  -D LGFX_PIN_BL=42
  -D LGFX_TOUCH_INT=41
  -D LGFX_TOUCH_CS=7
  -D LGFX_TOUCH_CLK=12
  -D LGFX_TOUCH_DO=11
  -D LGFX_TOUCH_DIN=13
  -D LGFX_TOUCH_X_MIN=300
  -D LGFX_TOUCH_X_MAX=3900
  -D LGFX_TOUCH_Y_MIN=400
  -D LGFX_TOUCH_Y_MAX=3900
  -D VIEW_320x240
  -D USE_PACKET_API
  -I lib/device-ui/generated/ui_320x240
  -I variants/diy/mesh-tab
build_src_filter = ${esp32_base.build_src_filter}
  +<../lib/device-ui/generated/ui_320x240>
  +<../lib/device-ui/resources>
  +<../lib/device-ui/locale>
  +<../lib/device-ui/source>
lib_deps = ${esp32_base.lib_deps}
  lovyan03/LovyanGFX@^1.1.16
  earlephilhower/ESP8266Audio@^1.9.7
  earlephilhower/ESP8266SAM@^1.0.1